form fill and used for sale

FESSMANN 1000 lit

Gas and air filters, air filters -Manufacturer: Maxitrol -Type: GF65 MF-DN65 -Dimensions: 245/199/H190 mm -Weight: 4.5 kg

Exterior mirror, exterior mirror -Number: 2x exterior mirrors, right and left -Price: complete -Manufacturer: VW -No.: 2D1 857 502A 01C -Weight: 3.6 kg

Filter roll, separating and filter fleece, 2 rolls -Manufacturer: POLO -Type: 360 -Number: 2x rolls available -Price/Sale: complete -Dimensions: 500 mm -Weight: 20 kg

Clamping plate, welding table, welding table, straightening plate, clamping cube, clamping tower, clamping box -Width: 200mm -Length: 503mm -Height: 150mm -Plate thickness: mm -Hole diameter: 26mm -Dimensions: 503/200/H150 mm -Weight: 28kg

AFT Sandwich cutter Stainless frame, belt dimensions 2200mm x 150mm, manual wheel to set product height, 3Ph, mobile

Made in Italy Peak: 300 mm Rotary diameter over bed: 600 mm Rotary diameter via sled: 380 mm Peak: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (12) 16-1200 U/min Engine power: 9.2 kW (special equipment/standard: 7.5 kW) Reprimor Z-axis: (93) 0.028-6.43 mm/U Feed X-axis: (93) 0.012-2.73 mm/U Thread, metric: (54) 0.5-224 mm Threads, Witworth: (55) 72-1/4 x8 TPI Thread, module: (54) 0.5-112 mm Threads, Diametral Pitch: (54) 64 -1/4 D.P. Crossleigh hub: 340 mm Oberslitten hub: 150 mm Riding stock pinol diameter: 85 mm Riding stove pinol stroke: 200 mm Ridstock cone: MK 5 Weight: About 3,200 kg Facilities: -3-axis digital display -Step-by-step speed adjustment -Automatic lubrication of the management railways -LED lighting -Micrometer bed strike -9.2 kW engine instead of 7.5 kW -Quick change holder system mul ...

Siemens X-ray and fluoroscopy system/ angiography Polystar TOP with the following device components: generator Polydoros SX 65/80 tube Megalix 125/40/82 CM 0.6/1.0 Digital image processing Fluorospot TOP Image intensifier Sirecon 40-4 HDR 40cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is  ...

Dornier Opus with the following device components: generator Hofmann Selector D tube Comet DI 97 HS-33/81-150 0.6/1.2 Image amplifier 40cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qu ...

Rung and miter punch, rung punch -Manufacturer: Rammefabriken, mechanical corner punch -Intermediate dimension: 100 mm -Adjustment depth: 65 mm -Dimensions: 1700/600/H1080 mm -Weight: 118 kg

Stepped end and flush cut tuber, 4 plies, 3 colour tail end printer, photo cell for preprinted paper, web guide units

Gyro, capsule, rotary piston and sine pumps HILGE, FRISTAM, MASO, KSB and others Stainless steel pumps in various designs and sizes

Stop for chop saw, pull saw, stop and measuring system -Manufacturer: elumatec, stop and measuring system with digital display -Inclusion: Bosch profile -Length unit: 4280 mm -Price: complete -Dimensions: 4710/510/H635 mm -Weight: 72kg

Tip width: 700 mm Tip height: 150 mm Circulation diameter over bed: 300 mm Bed width: 180 mm Spindle bore: 38 mm Mounting in the spindle bore: MK 5 Speed range, infinitely variable: 30 - 450 / 150 - 3000 rpm Range of longitudinal feeds: (14) 0.07 - 0.65 mm/U Area of plan feeds: (11) 0.03 - 0.12 mm/U Metric threads: (18) 0.2 - 3.5 mm Inch Thread: (21) 8 - 56 Gg/1" Pinole path: 85 mm Pinole holder: MK 3 Engine power S1 100%: 1.5 kW / 400 V Motor recording power S6 40%: 2.2 kW / 400 V Machine dimensions (W x D x H): 1380 x 640 x 500 mm Weight approx.: 235 kg without base Delivery: - Digital display - 3-jaw chuck PO3-160 mm steel version - Feed flange 160 mm - Solid grain tips - Interchangeable wheels - Quick-release steel holder size 20-2 with 2 straight inserts - Slip clutch - Micrometer longitudinal stop - Plan sled with top support - Frequency inverter ...

Panaroma Model: AT400 Pasta stacking and cutting machine Serial: 1229 2002, Stainless stacking and cutting machine, 400mm width, designed to roll, to dust, to cut and to overcome the pasta sheet layers, suitable for lasagne or tagliatelle. Output up to 100Kg / hour, variable speed, with timer, 3ph, mobile

20,000 liters tank with thermal insulation not used tanks

Gas and oil burners, oil burner filters, heating oil filters, filter and deaerator units, heating oil deaerators -Manufacturer: oilon, filter and vent unit unused, original packaging -Type: Oilon Plus -Technical data: see photo of the nameplate -Cardboard dimensions: 370/180/H150 mm -Weight: 1.8 kg

Transit Ultrasonic Banderolier ATS US 2000 AB TR; good condition; maintained and checked by ATS Customer Service in Heidelberg; Frame 360x260mm; Bandwidth 15mm. Transit ultra sonic banding machine ATS US 2000 AB TR; good condition; cleaned and checked by the support of ATS Heidelberg; frame 360x260mm; band width 15mm.

Werner & Pfleiderer Multimatic Head Machine 4-row used immediately available in the warehouse. Type: Multimatic 4-row Stand machine the machine is in the baker's condition Built in 1993 380 Volt

rack, toothed rail -Rack: Toothed rail, straight teeth -Length: 1000 mm -Width: 60 mm -Height: ha 60 mm -Module: 6 (see photo) -Dimensions: 1000/60/H60 mm -Weight: 25.1 kg

Spindle diameter 203.2 mm x-travel 9,000 mm y-travel 4,000 mm Grinding spindle diameter 335 mm Spindle holder ISO 60 Spindle speeds 1-350 / 5-1,200 rpm w-axis 800 mm z-axis 1,200 mm Rapid x-axis 8,000 m/min Rapid y-axis 6,000 m/min RAM Dimensions 530 x 600 mm Main drive 75 kW Total power requirement 165 kW Machine weight approx. 130 t Space requirements approx. 16 x 5.5 x 8.1 m Addition: - hydrostatic guides in x-, y- and w-axis - Telescopic cover for the X-axis of the bed - cumulative Z and W axes - Leveling shoes - Platform Y axis

Travel X-axis 19,000 mm Y-axis 3,500 mm Z-axis 1,000 mm W-axis 1,000 mm V-axis 2,500 mm B-axis 360°/ 0.001 Table size 4,000 x 3,500 mm Maximum permissible weight on the table 65 t Spindle diameter 160 mm Mounting cone in spindle 2079 DIN/ ISO 50 Spindle speed 2.5 - 1,000 rpm Spindle motor power 90 kW RAM cross section 400 x 400 mm Automatic tool changer 60 positions Feed in all axes 1 - 6,000 mm/min Rapid response in all axes 10,000 mm/min Automatic indexing 360,000° Plate field 12,750 x 6,000 mm CNC, electrical and mechanical overhaul by Siemens in 2003

Travel X-axis 9,500 mm Y-axis 4,100 mm Z-axis 950 mm W-axis 900 mm Main spindle speeds (infinitely adjustable): 3.15 - 1000 rpm Spindle motor power 58 kW Feed speed (infinitely adjustable): X-axis 0.1 - 9600 mm/min Y-axis 0.1 - 5600 mm/min Z-axis 0.1 - 5600 mm/min W-axis 0.1 - 5600 mm/min Accessories: Plate field: 6 x 4 m (CNC-controlled B- and V-axis) Table: 2 x 2 m (CNC-controlled B- and V-axis)

Counterholder, counter bearing, bearing block, pillow block, holder for draw and lead screw, draw and lead screw holder, spindle holder -Holder: for pull and lead screw -Dimensions: see photos -Transport dimensions: 160/120/H400 mm -Weight: 14.7 kg

Bread slicer Wabäma Type Piccolo 380.10 HA MB Cutting width 10mm semi-automatic 230 Volt 0.75 kW

Automatic Cutting width 9mm 192 kg 1.1 kW 400 Volt - 50 Hz

Cutting width adjustable from 4-14 mm analog control Sickle knife machine Stainless steel cladding on rolls with traces of usage Voltage 400V / 50Hz

Counterholder, counter bearing, bearing block, pillow block, holder for draw and lead screw, draw and lead screw holder, spindle holder -Holder: for pull and lead screw -Dimensions: see photos -Transport dimensions: 105/155/H450 mm -Weight: 11.3 kg

trolley -Simple bucket -Flat press -2x shelves for microfiber mops

1 MONTI compacting and finishing calender type 900-E for tubular knitted fabric in ALL FIBERS (naturals, synthetic, elastic and mixed). ). It can also heatset the 100% synthetic fabric (polyester, etc.) year 2001, very very little use (only about 2 year work time) with 2 compacting cylinder diameter 350 mm, cylinders are chrome plated and with a mirror effect finishing, felts width 1750 mm, working width 1450 mm, exit with precision plaiter or roller winder

chassis, electric motor, DC motor, traction motor, drive motor -Manufacturer: Baumann, chassis from electric forklift EVS 25/14 -Wheels: Ø 275 x 100 mm double tires -Individual components: see photos -Price/Delivery: complete -Transport dimensions: 860/360/H425mm -Total weight: 206 kg

Crusher and shredder for broken asphalt; Motor 75 kW with hydraulic feeder in the hopper. Milling shaft. Power 75 t/h For granulating asphalt break-up. Up to 1200 x 400 mm. Granules depending on the built-in screen size.

Tires, solid rubber tires, forklift tires, complete wheels -Manufacturer: Gumasol, Softy solid rubber tire with rim and sprocket -Type: GLE 4.00-4 -Hub: Ø 228 mm -Tooth ring: Ø 20 mm / 55 teeth -Submission/Price: complete -Dimensions: Ø 300 x 245 mm -Weight: 22.7 kg/pc.

Wabäma Economy Plus bread cutting machine with long bread inserting tray suitable for 52cm of bread. -with sickle knife -with oiling -Built in 2007 -Cutting width adjustable -three-phase current 400 volts -Rated power 1.9 A -Control voltage 24 volts -Operating voltage 24 volts -Weight 285 kg

Gas injection technology Bauer – 11 pcs. 2001 – 2007 year prod. Price - 1.500 Euro/pcs.

-Circular knife bread cutting machine -Cutting width 400mm -Note thickness adjustable -Built in 2015

2000 Ltr Roversi butter Churn Double jacketed to avoid the hiumidity, see-through glass, fins inside the churn to brake down the butter and control panel self mounted. Make: Roversi Tank Volume : 2000 ltr Cream Capacity : Min 500 Litres To 1000 Litres Double jacketed 1 Door with safety closer See through glass Stainless steel production area Hzjsulook Skid mounted VISIT & INSPECT : DERBY UK, DE24 8HL , UNIT 6 ,Dairy Machinery UK Site.

Clamping table, clamping angle, T-slot table, rotary table, milling machine table -Table surface: 210 x 570 mm -T slots: 3 - rotatable and swiveling -Fits Deckel Mikron WMW and other milling machines -Weight: 95 kg

Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head -Recording: SK50 Minimum bore diameter: 95 mm -Max. bore diameter: 115 mm -Suitcase -Dimensions: 400/170/H140 mm -Weight: 12 kg

No.: 469544 Comm.: 63008879 Y.O.m.: 2014 Capacity: 3m3/h at 145 rpm 3.5m3/h at 177 rpm Pressure: 6 bar, Temp. 95°C LWH: 1500 x 200 x 300 mm Weight: approx. 80 kg on request with spare parts (rotor, stator, etc.)

Food Extruders single and twin screws for various applications : breakfast cereals, corn flake, pet food, full fat soya, snacks We overhaul many models and have in our stocks machines like Clextral BC 45/82, wenger 175 ... also walter single screw. Milin Gentieg cereals Britany, France processing equipments has been specialising for years. We organise deliveries to any destinations for single machines or complete lines from cleaning to flaking and extrusion

Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head -Recording: SK50 Minimum bore diameter: 100 mm -Max. bore diameter: 120 mm -Suitcase -Dimensions: 350/170/H135 mm -Weight: 12 kg

NNP Stainless vacuum tumbler, 1500Kg capacity, forward / reverse, with timer, two stainless lids, 3Ph

Universal milling machine vertically / horizontally from a training workshop Manufacturer Hermle Type FW801 Tool holder SK40 automatic feed in three axes Digital display in three axes Machine technically in very good condition under electricity ready for demonstration Technical data: Travel: x=350mm y=150mm z=220mm Spindle speeds from 50 to 3,150 rpm can be infinitely variable Feed speed infinitely adjustable via rotary pot from 10 to 5,000 mm/min, aisle Special price Used milling machine Hermle FW 801

Type: New Boiling Melting Fat 300 Liter Completely stainless steel Integrated mixing system Double insulating wall Possibility of boiling the mass Volume: 300 liter Machine dimensions in cm: Length: 161 Width: 124 Height: 123 Delivery time: 1 working day after advanced payment

Type: Ruhle SR2 with Elevator Loading sections (L x W x H): 500x120x200 mm Cutting length: 1,0 – 30,0 mm Saw blades 1 set Capacity: up to 1800 kg/hour Electric power: 3.5 kW Machine dimension in cm: Width: 70 cm Lenght: 180 cm Height: 125 cm Delivery time: 10 working days after advanced payment

Fully Automatic Bread Slicing Machine Manufacturer: TREIF Type: DISKUS – SB Technical data: Round knife cutting bread slicer Oil-free cutting even of warm breads 3 cutting thicknesses selectable: 8mm, 10mm and 12mm Bread passage: L 380 x H140-160 x D280 mm Automatic bread gripper suitable for all types of bread with bread rack for bagging with sight glass cover for optimum safety during the cutting process Easy cleaning without having to move the machine 400 volts / 0.9 kW / 10 A Dimensions: H110 x W90 x D76 cm Weight: 200 kg Mobile on 4 pulleys with 2 brakes Year of Make: 2010 Function checked, machine is thoroughly cleaned and ready for immediate use! Condition, see original pictures! If you have any questions, email or call.

SKU: 90458-0602 Photocell for PT 21 Pull Tab applicator and ASU of the A3 flex aseptic filling machine