137,132 used machines on RESALE, but how to find them? Machine Search
Vertical packaging machine, high speed machine with continuous rotary sealing jaws motion, suitable for pillow bags, MITSUBISHI PLC, WEINVIEW touch screen operator interface, automatic program set-up, mark sensor registration control, quick change former assembly, servo motor sealing unit, servo motor film pulling, double pulling possible. - Specifications: bag size: L(80-500)xW(70-265)mm (single pulling) | film width: 170-560mm | max. speed of the machine in neutral: 180 cycles/minute | stainless steel | 380V/7.5kW | 6bar, 0.25m?/min | machine dimensions: L1500xW1200xH1620mm | weight: 700 kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machine ...
4-lane VFFS for the packaging of granulates, powder or liquids in center sealed bags, optionally also for 3- and 4-side sealed bags (extra charge). Servo motors for fast film feed. Suitable for all sealable mono and composite films as well as laminated films. Further features: Touch screen operating monitor, automatic program setup, mark sensor, date/batch printer. - Specifications: max. machine cycle rate in idle mode: 4x60 cycles/minute (corresponds to max. 240 bags/min) | bag sizes: L(50-250)xW(55-102)mm | film width: 520-900mm | power: 380V, 6,3kW | compressed air: 1,4m?/min, 6bar | machine dimensions: L1800xW1600xH1760mm. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from appr ...
A form-fill-seal machine Rovema including a multihead weigher Ishida CCW-S-211 is available. Bag dimensions X/Y: 220mm/340mm, packaging capacity: 55 bags/min, operating hours: 35554h. Documentation available. An on-site inspection is possible.
Bosch Angle Head Cabinet Tool You are buying a high-quality winding head cabinet machine for anchor production. The area of application mainly concerns anchor production. Manufacturing/production/operating documents are included with the machine. Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!
A form-fill-seal machine Rovema including a multihead weigher Ishida CCW-S-211 is available. Packaging capacity: 80 bags/min, bag dimensions X/Y: 250mm/350mm, max. film roll width: 530mm, machine dimensions X/Y/Z: approx. 2000mm/1450mm/1850mm, weight: approx. 1200kg, operating hours: 14607h. Documentation available. An on-site inspection is possible.
Height=1.9 m, Overall length= 1.3 m, Overall width= 3.5 m, Net weight= 1110 kg,
Height=2.12 m, Overall length= 0.9 m, Overall width= 2.3 m, Net weight= 1110 kg,
Height=2.03 m, Overall length= 0.75 m, Overall width= 2.12 m, Net weight= 815 kg,
Height=2.12 m, Overall length= 0.9 m, Overall width= 2.4 m, Net weight= 1035 kg,
Height=1.26 m, Overall length= 0.5 m, Overall width= 1.7 m, Net weight= 120 kg,
Height=1.8 m, Overall length= 1.9 m, Overall width= 0.85 m, Net weight= 640 kg,
A fully automatic vertical form-fill-seal machine Hassia is available. Packaging materials: laminates/paper films/monofilms, max. bag width: 600mm, max. bag length: 1100mm, max. film width: 1240mm, max. film roll diameter: 600mm, cycle performance (continuous operation): 40 cycles/min, heat-sealing temperature: 92°C. An on-site inspection is possible.
Inv. Num. : 8662 Type: Rondamat 960 Producer: Weinig Generated: 2000 Parameters: Max. Speed: 1500-3000 1/min Grinding wheel diameter: 150/225 mm Grinding wheel drilling: 60 mm
Kodak Trndsetter Q800 with developer year 2016. Model TJ1903 developer EL125T In production X speed, 42 plates per hour software
Rheon Cornucopia Type: KN200 Pieces of dough: 10-300 gr. Capacity : 10-60 pieces/min digital control Stainless steel cladding rollable on castors Height: 160cm Width: 80cm Depth: 150cm
Used machine in top condition Edge milling machine for simultaneous upper and lower flush milling of protruding edges such as PVC, ABS, melamine and real wood veneer. Milling of the edge can be carried out on square, round, curved, workpieces with outer and inner radius. The machine is the ideal complement to the edge banding machine B 56, B 560. The two vertically operating HF flush milling motors, 18000 rpm, are equipped with indexable insert knives (R=2 mm). With driving equipment. Pull-out support at the front. Pneumatic excavation. Control panel position : top Total connection: 2 kW Working height or feed table height : 850 mm Workpiece thickness (radius milling): approx. 16-55 mm Workpiece width min. approx. 30 mm Edge thickness: 0.4-3.0mm Inner wheels min. approx. 50 mm Weight approx. : 155 kg Dimensions : approx. 1000 x 750 mm
A vertical form fill and seal packaging machine Goglio for bulk materials including a vibrating chute scale with two chutes is available. Weighing range min./max.: 300g/3000g, accuracy: +/-0.3%, load cell type: HBM PW2 C3/18, max. load: 18kg, scale type: GL 111, packaging dimensions for 1000g: 130mm/80mm/400mm. Machine dimensions X/Y/Z: approx. 2300mm/3000mm/3500mm, weight: approx. 2800kg, control: IBM 7542 industrial computer. The machine is defective. Documentation available. An on-site inspection is possible.
sheet width: 750 mm plate length: 1250 mm plate thickness: 4 mm table surface area: 1600 x 1050 mm no. of strokes: 180 Hub/min max. punching diameter: 105 mm punching pressure: 25 t total power requirement: 4,0 kW weight of the machine ca.: 1,8 t dimensions: 1,9 x 1,9 x 1,7 m Punching and nibbling machine - Digital readout for X and Y axis - Tool cabinet with tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
KODAK Magnus VLF MTA Large Format Thermal Platesetter with MCU Multi-Cassette Unit (Four Cassettes) New TH 7 laser (May 2022) with only 1296 laser hours 2400 dpi Z-Speed Panel counter: 258861 Minimum size: 483 x 394 mm Maximum size: 1600 x 2083 mm Material flow from right to left with Prinergy TIFF Shooter Dell PowerEdge 7330 Plate development machine built in 206 Year of Make: 2006
KODAK Magnus VLF MTA Large Format Thermal Platesetter with MCU Multi-Cassette Unit (Four Cassettes) New TH 7 laser (08/2022) with only 2615 laser hours 2400 dpi Z-Speed Panel counter: 395443 Minimum size: 483 x 394 mm Maximum size: 1600 x 2083 mm Material flow from left to right with Prinergy TIFF Shooter Year of Make: 2016 New TH 7 laser (08/2022) with only 2615 laser hours
A continuous Schur flow pack machine is available. Output rate: 30m/min, max. packaging capacity: 80bags/min, min. bag dimensions X/Y: 100mm/100mm, max. bag dimensions X/Y: 450mm/500mm, bag material: PE/CPP/films/laminates, material thickness range: 0.04mm-0.14mm. Weight: approx. 650kg, control system: Siemens Simatic PLC S7-300, operating hours: 256h. Documentation available. An on-site inspection is possible.
pressure: t plate thickness: 5 mm sheet width: 40 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This is a LITTLE GEM glass bottle filler for 1 Pint milk bottles round format. The machine cuts and applies with heat sealing the aluminium cap that is done via a fords cutter and capper. This machine can do 1pint and 2 pints. The machine has been running until 2025 and can be sold either as is working condition or fully refurbished . The machine is driven by 1 single motor that is located at the bottom of the machine turning two gears one opposite to the other making this a very robust and easy to maintain system., Capacity: 2000 bottles per hour , Aluminium Cutting: Fords systems , Format: 1 Pint Milk Bottles , Sealing Device: Included , Construction: Fully Stainless steel on product connection Parts , Filling Type: Mechanical valves that the bottles lifts the rubbers up and the milk flows through, one the mechanical vacuum is activated this helps to avoid over, Collection Table: Inclu ...
A horizontal flowpack pillow bag machine (flowwrapper) Alpha Pack is available. Packaging capacity: approx. 20-30 packages/min, max. roll width: 600mm, max. product height: 140mm, max. product length: 1000mm, min. product length: 600mm, product width range: 50mm-280mm, max. film diameter: 300mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible.
Mould grinding machine OTT - KG Up to 150 mm wide with Stepless Transport Carpet Profile strip and semi-round mouldings
Biscuit forming machine Janssen FM128 K580S used Janssen FM 128K580S pastry forming machine with 600mm working width including 2 forming rollers. The machine is mobile on rollers, completely covered with stainless steel sheets. The machine is in good visual and technical condition and can be viewed and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. - 60cm sheet size - With 2 forming rollers (optionally extra forming rollers) - With additional heating - Stainless steel cladding - Automatic sheet metal feeding - For trays: 60x40cm, 60x80cm or 60x100cm - Heating: 2 x 2000W - Connected load: 380 volts
A horizontal flow pack packaging machine (tubular bag machine) SKS is available. Packaging capacity: 30-120 packages/min, film roll width: 220mm-500mm, bag length range: 120mm-500mm, bag width range: 60mm-200mm, bag height range: 5mm-80mm. Machine dimensions X/Y/Z: approx. 4500mm/1150mm/1600mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible.
Edhard Funnel 5.5 Ltr. single outlet, 1-hole SystemFunnel 5.5 Ltr. Â single output, made of transparent Lexan, 1-hole systemDetails see pictures
used pastry forming roller Kalmeijer KGM Kipferl 1380-910BProduct descriptionManufacturer: KalmeijerType: KipferlNr.: 1380-910Bowant: usedDough figure:Dimension: 40x34 mmThickness: 7.5 mmWeight: 6 grRoller width: 250 mmDetails see pictures.
Spreader / Sprayer Manufacturer : Zettelmeier 3 Motor with air pressure Dimensions: W: 80cm D: 150cm H: 175cm Details see picture
A used BECK flow wrapping machine Serienpacker is offered. Fully automatic film packaging machine with 4-side sealing principle, operates with two flat film rolls upper and lower film, processing films PE, PP, polyolefin. Inspection by appointment possible.
Pastry line Seewer RondoManufacturer: Seewer RondoType: SPF 601 Amit calibration and rollersBand width: 64 cmExternal dimensions without caliber: W: 385 cm D: 95 cm H: 185 cmExternal dimensions Caliber: W: 175 cm D: 90 cm H: 115 cmDetails see picture
used pastry forming roller Kalmeijer KGM Pretzel Small 1383-912AProduct descriptionManufacturer: KalmeijerType: Pretzel KleinNo.: 1383-912AZstand: usedDough figure:Dimension: 55 mmThickness: 4 mmWeight: 7 grRoller width: 250 mmDetails see pictures.
Kalmeijer Pastry Forming Roller KGM Flowers 1612-900BProduct descriptionManufacturer: KalmeijerType: FlowersNo.: 1612-900Bowant: usedPastry figure:Dimension: 55 mmThickness: 5.5 mmWeight: 15 grRoller width: 250 mmDetails see pictures.
Kalmeijer Pastry Forming Roller KGM German Männchen 1502-930BProduct descriptionManufacturer: KalmeijerType: German MännchenNr.: 1502-930Bowant: usedDough figure:Dimension: 82x33 mmThickness: 2.5 mmWeight: 8 grRoller width: 250 mmDetails see pictures.
Kalmeijer Pastry Forming Roller KGM Nut Sticks 1100-910BProduct DescriptionManufacturer: KalmeijerType: Nut SticksNo.: 1100-910BTrade: UsedDough Figure:Dimension: 35 mmThickness: 3 mmWeight: 4 grRoller Width: 250 mmDetails see pictures.
Kalmeijer pastry forming roller KGM Taler small 1120-910AProduct descriptionManufacturer: KalmeijerType: Taler smallNo.: 1120-910AZstand: usedPastry figure:Dimension: 55 mmThickness: 4 mmWeight: 13 grRoller width: 250 mmDetails see pictures.
Kalmeijer Pastry Forming Roller KGM Nut Sticks 1263-930BProduct DescriptionManufacturer: KalmeijerType: Nut SticksNo.: 1263-930Bowant: UsedDough Figure:Dimensions: 77 x 25 mmThickness: 3.5 mmWeight: 11 grRoller Width: 250 mmDetails see pictures.
Kalmeijer Pastry Forming Roller KGM Kipferl 1380-910BProduct descriptionManufacturer: KalmeijerType: KipferlNr.: 1380-910Bowant: usedDough figure:Dimension: 40x34 mmThickness: 7.5 mmWeight: 6 grRoller width: 250 mmDetails see pictures.
Pastry forming machine Janssen FM 128 Product description Manufacturer: Janssen &, Sohn Type: FM 128 / K4 A Year of construction: 1979 Condition: used, functional, bakery condition Working width: 250 mm Incl. forming rollers (s.b.) Mobile undercarriage connection: 220 / 380 V See pictures for details.
Manufacturer : NBSType : 79Q540Stainless Steel 3PE AC 400V 4.0A Cup B:240cm D: 75cm H: 140cm With Multiple Knife BlockSee Picture
Product description: Manufacturer: Kalmeijer Type: Kalmeijer KSM The thickness of the dough figures is adjustable. Dough hopper, forming roller and dough feed roller are easily removable for cleaning. Easy to use The conveyor belts for the trays can be folded in and out. The machine takes up little space. The machine is on castors and therefore mobile. Dimensions: Height: 132 cm Width: 51 cm Depth: 102 cm See pictures for details.
Knife for Kalmeijer KGM Pastry Forming Machine NewâœProduct Descriptionâœ" Manufacturer: Kalmeijerâœ" Condition: Newâœ" Length: 31.5 cmâœ" Width: 2 cmDetails see picture
maximum number of results exceeded
please refine your search
