forklift side lift used for sale

On mobile frame Suction plates with lifting capacity 1700 dimensions approx. 125x70 cm with rubber length 350 Auction-ID: A1-50663-1326

As well as 9 pieces of chain tensioners and 2 lifting chains Certificate HV3215 Auction-ID: A1-50663-1486

Fixed all-stainless steel elevator on fork jib for lifting containers, tanks, hoppers, drums, etc. Equipped: - Hydraulic cylinder lift jib crane - 180° jib rotation - 180° rotation of the 2 forks for hopper tilting - Adjustable safety to set the desired height of elevation - Container presence security - Hydraulic power unit - Control cabinet Mounted on a stainless steel base, to be fixed to the ground and preferably at height Capacity: - Maximum lifting load: 800 kg - Minimum fork height from the ground: 650 mm - Maximum fork height from the ground: 2850 mm - Fork length: 600 mm - Fork centre distance: 1000 mm - Fork diameter: 75 mm Engine power: 2.2 kW Maximum air pressure: 8 bar Auction-ID: A1-51318-221

Lifting beam equipped with hooks for concrete cube Test load 62.5 KN On steel frame Certificate No. HV1755 Auction-ID: A1-50663-1510

Equipped with 4 hooks with hoisting cables and lifting straps. Otherwise parcelled items visible in the photos are not included. Auction-ID: A1-50663-1383

Lifting slings set Contents: 22 pieces Type: Polyester Flat Lifting Straps Lifting capacity: 2 to 5 tons Safety factor: 6:1 Contents: 2 tons (green) 2 × 2 meters 2 × 4 meters 2 × 6 meters 3 tonnes (yellow) 2 × 2 meters 2 × 4 meters 2 × 6 meters 4 tons (grey) 2 × 2 meters 2 × 4 meters 2 × 6 meters 5 tons (red) 2 × 4 meters 2 × 6 meters Colour coding: according to lifting capacity Condition: Unused Auction-ID: A1-51368-176

Type of lifting truck: VA121 year of manufacture 2008. As well as Muyen VA116 500 kg lifting beam with fall protection Auction-ID: A1-50663-1557

5 crate pallets with various sizes of lifting sleeve anchors and sliding sleeves, as well as in bags Plastic containers on the crate pallets not included Auction-ID: A1-50663-1670

Type of lifting truck: VA124 year of manufacture 2020. As well as Muyen VA116 500 kg lifting beam with fall protection Auction-ID: A1-50663-1559

Hoisting traverse on wooden block and Storage rack for lifting material size approx. 132x75x165 cm Auction-ID: A1-50663-1316

Certificate No. HV3214 As well as 14 pieces of chain tensioners Auction-ID: A1-50663-1300

Hydraulic pump unit with 4 lifting cylinders On mobile metal frame with remote control Auction-ID: A1-50663-1543

Pneumatically operated lift table with air pressure adjustment according to the weight of the products Equipped: - Turntable with a diameter of 1050 mm - Minimum rise: 330 mm - Maximum elevation: 800 mm - Maximum weight capacity: 1000 kg - Pneumatically operated up and down - Pressure gauge for pressure control from 0 to 8 bar - Air tank - Compressed air supply Auction-ID: A1-51318-240

Lifting capacity: 1 x 8.5 tons, 1 x 4.5 tons, 1 x 2.0 tons Auction-ID: A1-51285-352

Lifting beam equipped with hooks for concrete cube Test load 62.5 KN On steel frame Certificate No. HV1755 Auction-ID: A1-50663-1350

Lifting slings set Contents: 22 pieces Type: Polyester Flat Lifting Straps Lifting capacity: 2 to 5 tons Safety factor: 6:1 Contents: 2 tons (green) 2 × 2 meters 2 × 4 meters 2 × 6 meters 3 tonnes (yellow) 2 × 2 meters 2 × 4 meters 2 × 6 meters 4 tons (grey) 2 × 2 meters 2 × 4 meters 2 × 6 meters 5 tons (red) 2 × 4 meters 2 × 6 meters Colour coding: according to lifting capacity Condition: Unused Auction-ID: A1-51368-257

Lifting beam equipped with hooks for concrete cube Test load 62.5 KN On steel frame Certificate No. HV1752 Auction-ID: A1-50663-1339

Elevator for caps, pumps, bottles, jars, etc. Equipped: - Conical feed hopper. Dimensions 900 x 500 x 400 mm - PVC belt elevator with bars - Strip width 150 mm - Bars height 20 mm - centre distance 100 mm - Geared motor drive Mounted on a height-adjustable frame Capacity: Lift height of 1200/1400 mm Motor power: 0.12 kW Auction-ID: A1-51318-281

For shaking, lifting and dosing ejection of various material. Equipped with 2 ItalVibras vibration motors and cover plate. Filled with micro steel fiber. Auction-ID: A1-50663-1547

Lifting slings set Contents: 22 pieces Type: Polyester Flat Lifting Straps Lifting capacity: 2 to 5 tons Safety factor: 6:1 Contents: 2 tons (green) 2 × 2 meters 2 × 4 meters 2 × 6 meters 3 tonnes (yellow) 2 × 2 meters 2 × 4 meters 2 × 6 meters 4 tons (grey) 2 × 2 meters 2 × 4 meters 2 × 6 meters 5 tons (red) 2 × 4 meters 2 × 6 meters Colour coding: according to lifting capacity Condition: Unused Auction-ID: A1-51368-68

Suction plates with ø approx. 29 cm Auction-ID: A1-50663-1328

With suction plates dimensions approx. 125x100 cm Auction-ID: A1-50663-1303

Suction plates with lifting capacity 2250 dim approx. 45x130 cm Auction-ID: A1-50663-1327

Fixed all-stainless steel elevator on jib crane for raising tanks, hoppers, drums, etc. Equipped: - Pneumatic cylinder lifting jib - 180° jib rotation - 180° rotation for hopper tilting - Adjustable safety to set the desired height of elevation - Pneumatic control cabinet Mounted on a stainless steel base, to be fixed to the floor and preferably at height. Volume of the current hopper 10 liters. Capacity: - Maximum lifting load: 400 kg - Minimum ground elevation height: 550 mm - Maximum ground elevation height: 2850 mm Maximum air pressure: 8 bar Auction-ID: A1-51318-278

Consisting of three pairs of lifting chains a pair of 6 m lifting chains a pair of 5 m lifting chains a pair of chains each double chain of 1.70 m Auction-ID: A7-51362-35

Elevator for caps, pumps, small bottles, etc. Equipped: - PVC belt elevator with bars - Strip width 330 mm - length 1800 mm - Strips width 330 mm - height 50 mm - centre distance 300 mm - Geared motor drive - Stainless steel frame Mounted on a height-adjustable frame Capacity: Lifting height from 1200 to 1800 mm Motor power: 0.5 kW Auction-ID: A1-51318-279

Equipped with 4 hooks. Otherwise parcelled items visible in the photos are not included. Auction-ID: A1-50663-1384

Storage rack for lifting equipment with various lifting equipment Auction-ID: A1-50663-1380

Note that the last/back photos show the item in the assembled state. Auction-ID: A1-51321-68

MACHINE DATA: -Standard version (according to technical data sheets) -Articulated Loader -Operating weight 2850 kg -Long Boom -FOPS-ROPS canopy, a cab version is also available. -Mechanical suspended seat - vinyl -2 large rear-view mirrors -Standard fenders -Speed 0-20 kph -Wide range of attachments ENGINE: -Engine emissions according to Stage V or Tier 4 Final - EU Directive 97/68 -Water-cooled Perkins engine TCD 1.7 L3, 36 kW (49 hp) at 2800 rpm. DOC+DPF -BOOM & QUICK-COUPLER -Loader boom with P-bucket orientation kinematics with 100% precise parallel lifting -Boom float function -4 points hydraulic quick-coupler TRANSMISSION: -Hydraulic system -Hydrostatic transmission with wheel motor -Hydrostatic inching brake, acting on all 4 wheels -Hand throttle (M-Drive) -Speed limit (Speed-control) -4-wheel drive -Tyres BKT AS504 - 11,5/80  ...

Volvo FMFH 4x2 truck, built in 2005, equipped with a 9,400 cc diesel engine and automated gearbox. Odometer reading approximately 322,763 km. The vehicle has a maximum permissible mass of 19,000 kg, a dead weight/tare of approximately 9,700 kg and a payload of approximately 9,300 kg. Equipped with Dhollandia hydraulic tailgate with a lifting capacity of 2,500 kg, air suspension/adjustable driver's seat and air suspension with remote control. Also equipped with a new tachograph, blind spot camera, reversing camera and new tires. Belgian vehicle documents and certificate of conformity available. Inspection certificate valid until 17/08/2027. The truck starts, drives and brakes properly. Auction-ID: A3-46109-22110

MACHINE DATA: -Standard version (according to technical data sheets) -Articulated Loader -Operating weight 2850 kg -Long Boom -FOPS-ROPS canopy, a cab version is also available. -Mechanical suspended seat - vinyl -2 large rear-view mirrors -Standard fenders -Speed 0-20 kph -Wide range of attachments ENGINE: -Engine emissions according to Stage V or Tier 4 Final - EU Directive 97/68 -Water-cooled Perkins engine TCD 1.7 L3, 36 kW (49 hp) at 2800 rpm. DOC+DPF -BOOM & QUICK-COUPLER -Loader boom with P-bucket orientation kinematics with 100% precise parallel lifting -Boom float function -4 points hydraulic quick-coupler TRANSMISSION: -Hydraulic system -Hydrostatic transmission with wheel motor -Hydrostatic inching brake, acting on all 4 wheels -Hand throttle (M-Drive) -Speed limit (Speed-control) -4-wheel drive -Tyres BKT AS504 - 11,5/80  ...

Table length 1300 mm Table width 800 mm Lifting height 1020 mm Load capacity in kg 2000 kg Lifting height min. mm Connection voltage 400 V Total power requirement 0.75 kW Lifting speed - upwards empty sec. Lifting speed - downwards empty sec. Machine weight approx. 0.3 t Dimensions approx. 1.3 x 0.8 x 0.4 m Condition: functional Auction-ID: A7-51438-415

Thanks to the Swedish quality design, this table guarantees a stable and safe vertical positioning of your goods - Brand: Marco AB (VPG), Type: M1 005090-D1, Year of construction: June 2020, Lifting capacity: 500 kg (maximum distributed load), Lifting height (Stroke): 900 mm, Platform dimensions: 1350 x 800 mm, Construction height (Lowest position): Only 180 mm, Lifting time: Approx. 20 seconds, Connection: 3x400V AC (Power current), Protection class: IP55 (dust and splash water resistant), Operation: Includes ergonomic hand control with emergency stop, Standard: Fully CE certified. (Functional) Auction-ID: A3-46110-10851

Spare parts carrier, not completely. Auction-ID: A1-51437-4

The JCB-TH22504 is a robust and durable hydraulic garage jack, designed for a maximum lifting capacity of up to 2.25 tonnes. Protective rubber pad: Prevents scratches or damage to the vehicle during lifting. Extra-long design: Provides extra leverage and stability when lifting. Increased lifting height for SUVs: Suitable for lifting taller vehicles such as SUVs. Heavy-duty steel construction: Ensures stability and durability. Swiveling rear wheels: For smooth maneuverability and precise positioning. Swivel saddle: Allows easy and precise positioning. Built-in safety valve: Protects against overloading of the jack. Hydraulic oil bypass system: Prevents the cylinder from being extended too far. Magnetic tool tray: Handy for storing tools and small parts. Net weight: 21.5 kg. Auction-ID: A1-40333-60

Practical Nissan Atleon TK5615 truck with closed cargo box and powerful Dhollandia tail lift. Year of construction 04/2007 and only 120,528 km. Equipped with a 2,953 cc diesel engine of 110 kW (approx. 150 hp), manual 6-speed gearbox and Euro 4 emission class - The spacious closed cargo box is equipped with wooden protective slats and mounting rails and makes this Atleon particularly suitable for transport, moving or distribution work. At the rear is a Dhollandia DHLM50 tail lift with a lifting capacity of no less than 1,500 kg. Also equipped with reversing camera with monitor - The truck starts and drives perfectly and comes with 2 keys and the present Belgian on-board documents/conformity documents - The vehicle is in used condition, appropriate to age and use. Locally, slight rust, signs of wear and some damage/dents to the cabin and superstructure are visible; See photos. Despite tha ...

Load capacity 10000 kg Lifting height 130 mm Total height 265 mm Weight 22 kg Dimensions L x W x H 330 x 220 x 330mm Condition: never used / new (5) Auction-ID: A7-51438-619

Auction-ID: A1-51437-1

Battery empty. Auction-ID: A1-51437-5

Battery empty. Auction-ID: A1-51437-3

Loading onto trucks Auction-ID: A1-51437-2

KUHN GMD 4410 Lift Control Mower Manufacturer: KUHN Model: GMD 4410 Lift Control Year of construction: 01/2012 Working width: 4.35 m Facilities Rear attachment Disc mower deck Drive via PTO Swath baffle Auction-ID: A1-51207-2286

Equipment Articulated boom. Work basket. Basket and ground controls. Non-marking tires. New battery Controls and certifications Commissioning SGS report. EC Declaration of Conformity. Inspection carried out by SGS. Complies with the requirements of European Directives 98/37/EC and 89/336/EEC. Auction-ID: A3-46110-35815

MACHINE DATA: -Standard version (according to technical data sheets) -Articulated Loader -Operating weight 2850 kg -Long Boom -FOPS-ROPS canopy, a cab version is also available. -Mechanical suspended seat - vinyl -2 large rear-view mirrors -Standard fenders -Speed 0-20 kph -Wide range of attachments ENGINE: -Engine emissions according to Stage V or Tier 4 Final - EU Directive 97/68 -Water-cooled Perkins engine TCD 1.7 L3, 36 kW (49 hp) at 2800 rpm. DOC+DPF -BOOM & QUICK-COUPLER -Loader boom with P-bucket orientation kinematics with 100% precise parallel lifting -Boom float function -4 points hydraulic quick-coupler TRANSMISSION: -Hydraulic system -Hydrostatic transmission with wheel motor -Hydrostatic inching brake, acting on all 4 wheels -Hand throttle (M-Drive) -Speed limit (Speed-control) -4-wheel drive -Tyres BKT AS504 - 11,5/80 - ...

Battery empty. Auction-ID: A1-51437-16

Lifting cylinder for the model AX 400, total weight approx. 780kg, maximum pressure 250bar, eye diameter 400mm Auction-ID: A1-51269-1286

Auction-ID: A1-51437-7

Auction-ID: A1-51437-11

1998 Niftylift 170HDE Trailer Boom Lift – 17.1 m Working Height – Kubota Diesel – 200 kg Specifications: Brand: Niftylift Type: 170HDE Year of manufacture according to type plate: 1998 Serial number according to type plate: 17-5313 Working height: approx. 17.1 m Horizontal working range: approx. 8.7 m Maximum safe working load: 200 kg / 2 people Platform dimensions: approx. 1,100 × 650 mm Own weight: approx. 2,000 kg Transport dimensions: approx. 6,200 × 1,600 × 2,150 mm Engine: Kubota OC60E single-cylinder diesel engine Drive: diesel with hydraulic system Version: trailer aerial platform Made in Britain Features: Hydraulically operated telescopic/articulated arm Hydraulic stabilizer system Swivel work cage Electrical control from the work cage Drawbar with overrun brake Lighting Tires Auction-ID: A1-47396-2234