136,842 used machines on RESALE, but how to find them? Machine Search
A vacuum lifting beam including a small sanding unit and a motor is available. Year of construction: 1994, load capacity: 10000kg, dead weight: 3000kg. Engine: Hatz 3L40C and sanding station: Hommel. On-site inspection is possible.
Auction-ID: A3-46142-11223
Stock number: D1209, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Mobile column lifter, Dimensions: W 1500 x H 2800 x D 1100 mm, Emptying height: 2000 mm, Other: With chain drive - Max 200 kg
Stock number: D973, In stock: Yes, Amount in stock: 1 pc., Item: Vacuum lifter, Construction: Boom-mounted, Lifting tube: Ø 140 mm, Suction cup: 4 pcs Ø 150 mm, Motor: 0,12 kW - 220 Volt, Other: Intended for ceiling mounting
Stock number: D1211, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Column lifter, Motor: 1,5 kW - 3x220 Volt, Dimensions: W 1200 x H 3400 x D 500 mm, Emptying height: Variable - 2000-2700 mm, Other: Stationary with spindle - Max 300 kg
Stock number: D913, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Column lifter, Construction: For floor mounting, Tipping height: Max 1900 mm, Power: 0.75 kW, Voltage: 3x380 Volt, Amperage: 2,05 Amp, C/S: 50, Other: Lifting fork with slit grip for lifting/emptying of VEMAG wagons
new jib of 3 tonnes, can extend to 2.51m Auction-ID: A3-46142-6413
Stock number: D830, In stock: Yes, Amount in stock: 1 pc., Item: Hydraulic Lifting Arm, Dimensions: H 1950-2450 x D 800 mm, Stroke: 1000 mm, Type: Manually operated
Stock number: D1115, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Column lifter, Dimensions: W 2500 x H 3950 x D 1800 mm, Discharge height: 2500 mm, Shielding: Without shielding, Power: 2.2 kW, Voltage: 3x380 Volt, Amperage: 5.2 Amp, C/S: 50, Other: For lift and unloading of max 1000 kg bins
Stock number: D1088, Material: Painted edition, In stock: Yes, Amount in stock: 1 pc., Item: Column lifter, Dimensions: H 2850 mm, Tipping height: Estimated 1900 mm, Motor: 1,1 kW - 220/380 Volt, Type: Spindle type, Other: Lifting fork with slit grip for lifting/emptying of VEMAG wagons
Working and complete Auction-ID: A3-46142-11260
new jib of 3 tonnes, can extend to 2.51m Auction-ID: A3-46142-6414
Pneumatische Heißprägemaschinen/Lifting Hot Stamping machineGierlichPE 500 - 2P Baujahr / Year 1985 - Serial-No. 7458 Druckkraft / Pressure 5 kN Prägefläche / Embossing surface 100mm x 133mm Einsatzhöhe / Insert height 0-260mm Ausladung / Projection 220mm Folienbreite / Foil width max. 110mm Folienrollen / Foil rolls Ø120mm Prägetemperatur / Embossing temperature 50°C - 400°C
Vacuum lifting device for paper rolls NAGRON AEROLIFTVacuum lifter for the paper industryWoudenberg Holland type R96-20Fabr. No. 9745 Year of construction 1999Load capacity 2000 kgCentering mandrel 90 mmSuction surface Outer diameter 850 mm (plus seal)Suction surface Inner diameter 250 mm (minus seal)Sealing width 50 mmSuction surface 0.5 m2Vacuum min. -800 mbarPumping speed approx. 100 m³/h per vacuum pumpMotor power 2x 2.2 kWNet connection 400 Volts, 50 Hz- 2 pieces Rietschle
Stacker trucks, pedestrian stackers, hand pedestrian stackers LOGITRANS type LF 1001 / 1600Tool liftersSeries No: 051E04006100 Year of construction: 2005Load capacity: 1000 kg Lifting height: 1600 mmFork length: 600 mmPlatform size: 800 x 650 mmTotal length: 1200 mmTotal width: 800 mmOverall height: 1930 mm- Lifting via mechanical lifting hydraulics, pumping movement with the steering drawbar- 2 lifting speeds approx. 36 strokes up to lifting height 1600 mm or approx. 10 strokes for 10 cm lifting height.- Driving by pushing by hand- Fork stroke in the Single mast with free liftdead weight
Hydr. Scissor lift table TREPEL - L. A. VAN EIJLE & Co.Year of construction approx. 1980Load capacity approx. 5 ton. Platform size 1700 x 1100 mmStroke max. 515 mmOverall height Table bottom with rail rollers 535 mmOverall height Table bottom without rail rollers 480 mmTable height raised with rail rollers max. 1050 mmTable height raised without rail rollers max. 995 mmTravel speed rail chassis approx. 8.5 meters/min. Motor power 4 kWNet connection 400 volts, 50 Hz hand switch for up and down on the cable safety limit switch
Vacuum lifting device, vacuum lifterCustom-made as a handling device for an industrial robotYear of construction 2008Load capacity approx. 60 kgSuction foot spacing min. 120 x 150 mmSuction foot spacing max. 700 x 600 mm- 4 suction feet 100 mm- 4 vacuum ejectors, vacuum generator PIAB with compressed air connection 8 mm - 2 pieces cross member, adjustable in width via servo drive from 150-600 mm- suction foot spacing via 2 servo drives adjustable from 120-700 mm- suction cup adjustment via 3 pieces of servo motors REXROTH MSK040C-0600-NN-M1-UP0-NNNN- Very elaborate and
Vacuum lifting device, vacuum lifter FESTOSorld production as a handling device for an industrial robotYear of construction approx. 2008Load capacity approx. 50 kg- 7 pieces suction plate 32 mm (construction intended for 12 pieces)- 16 pieces suction plate 42 mm (construction intended for 20 pieces)- 5 pieces suction plate 60 mm (construction intended for 6 pieces)- a few suction feet are missing, see pictures- swivelling base body for suction surface in 90 angles or flat 180- base body pneumatically swivelling- Very elaborate and precise construction with
E-chain hoist, electric hoist, crane GIS type EM 25Fabr. No: 24468 Year of construction 1998Lifting capacity: 250 kgHook travel: 3.4 metersMain lifting speed: 8 m/min. Fine lifting speed: 1.5 m/min.1 load string = 250 kgCable length Control bottle: approx. 1.7 metresPower supply: 400 volts, 50 Hz- suspension eye on the top of the crane - without chassisWeight: 24 kggood condition; used
Auction-ID: A1-40330-149
Hydr. Hacksaw, hacksaw, lifting saw KASTO type PSB WBS 210 / 230Masch. No. 115 106 1212 / 72783 Year of construction 1986Sawing area - Round 250 mmSawing area - Square 225 x 225 mmSawing area - Rectangle 260 x 100 mmCutting speed 11 -13 - 17 - 22 - 26 - 34 m/min. Saw blade length 400 mmMotor power 1.4 and 1.8 kW pole-switchableMains connection 380 volts, 50 Hz- only for 90 cuts, no mitre adjustment- Saw motor with 2 speeds and 3 V-belt steps- Hydraulic saw bar feed- hydraulic
Lift table HANDY type 1250E Table size: 700 x 700 mm Capacity: 250 KG Year of construction: 1998 Maxi lifting height: 1350 mm Voltage: 12 V Dimensions (L x W x H): 1400 x 600 x 1900 mm Weight: approx 250 KG
Hydr. Flat-form scissor lift table FLEXLIFT FLUNDER type 1500 / 100 (without hydraulic unit)Year of construction 1991Nominal load capacity 1500 kgLifting capacity (practically tested) 1000 kg (at approx. 350 bar)Platform size 2100 x 1400 mmStroke max. 930 mmOverall height - bottom 100 mm (with mounting frame)Overall height - top 1030 mmHydr. Operating pressure 350 bar = lifting capacity 1000 kgHydraulic engine power 1.5 kWNerg connection 400 volts, 50 Hz- mechanical-hydraulic safety limit switches stop the lowering process when the safety strip is operated -
Lift table HANDY type 1250E - No 2 Table size: 700 x 700 mm Capacity: 250 KG Year of construction: 1998 Maxi lifting height: 1350 mm Voltage: 12 V Dimensions (L x W x H): 1400 x 600 x 1900 mm Weight: approx 250 KG
maximum number of results exceeded
please refine your search
40 € 
