We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,383 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
ELHA 6 Axis Horizontal Machining Center Xpert-K High-Performance Horizontal Machining Center The newly designed DEPO XPERT K horizontal machining centre offers a high degree of flexibility and above-average productivity. Description Horizontal BAZ The 6 axes are individually controllable. The HSK 100 holder makes it possible to clamp large tools and thus process large areas with high chip removal. Installed is a high-performance G30 fork head spindle with hydromechanical clamping system and a hybrid slewing bearing at top speed which allows extremely high speeds to be driven in order to achieve an optimal milling result even with the smallest tools. This fork head is equipped with a fully automated spindle change cycle, which makes it possible to replace the complete spindle in less than an hour. A hydraulic clamping device is installed for clamping components (effective table ...
used
Technical data: - Battery renewed in 2010 - Operating hours approx. 13965 h - Load capacity approx. 1500 Kg - Lifting height up to approx. . 6750 mm - Fork length approx. 1200 mm - Fork carrier width approx. 880 mm - Side slider - Free stroke approx. 2300 mm - Triplexmast - Space requirement with forks approx. W 1780 x L 2600 mm - Construction height approx. 2980 mm - Weight approx. 3500 kg
Technical data: - Operating hours approx. xxxx h - Load capacity approx. 1500 Kg - Lifting height up to approx. . 2900 mm - Fork length approx. 1200 mm - Fork carrier width 1800 mm - Space requirement with forks approx. W 2450 x L 2000 mm - Construction height approx. 1980 mm - Weight approx. 1250 kg
used
x-travel: 11200 mm y-travel: 3130 mm z-travel: 1000 mm Control: NUM 1060 W A-axis: +- 120 ° c-axis: +215/-210 ° spindle motor: 15 kW spindle taper: HSK-F63 turning speeds: 24000 U/min table width: 1500 mm table length: 9400 oder 2x3000 mm total power requirement: kW weight of the machine ca.: 20 t dimensions of the machine ca.: 14,6x5,0x4,225 m Use: e.g. for processing aluminum panels, drilling profiles, advertising (signs milling, etc.), mold construction (prototypes) and processing of light steel frames / -beams using HSC milling The vertically arranged high-frequency milling spindle for automatic Tool change is mounted in a fork head on the Z-axis plate. The Spindle can be moved with the fork head in 2 NC axes, in the A axis and the C-axis. The vertical movement is carried out via the Z-axis. Liquid cooling via a cooling unit. Tool magazine: moving plate changer in the potal, outsid ...
new
weight max. in kg: 1200 kg fork length: 1150 mm stroke height: min 85, max 190 mm : 160 mm length in width: 550 mm number of wheels: 4 vorne, 2hinten tire equipment: 80 x 70mm PU tandem fork arm (length x width x thickness): 1150 x 160 x 45 mm turning radius: 1452 mm battery: 48V / 20Ah weight of the machine ca.: 0,140 t dimensions: 1,65 x 0,55 x 1,2 m SPECIAL PRICE ! electrically raising / lowering electric procedure integrated charger 230 / 24Volt versatile easy to maneuver Driving speed with / without load 3.5 / 4.0 km / h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Power fork with spring compensation for long goods or pallets payload 2500 kg Fork length 800 mm Year of construction 2015 Position of the forks according to customer requirements The machine is in good condition, ready for operation. Subject to change, error, prior sale ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 Fax: 0041 62 966 21 12
used
TECHNICAL DATA SHEET CNC – Gantry gantry milling machine TRIMILL brand Type VF3016 Year of construction 2017 Control HEIDENHAIN iTNC530 HSCI Travel X-axis (longitudinal): 3,000 mm Y-axis (transverse): 1,600 mm Z-axis (vertical): 1,200 mm B-axis (swivel axis milling head) +/- 100 ° C-axis (rotation axis milling head) +/- 240 ° Structure / Axis concept AC servomotors with digital control for all axes Gantry drive of the X-axis Rack and pinion drive in the X-axis, backlash-free due to electrically prestressed, water-cooled motors 2 ball screws each in the Y and Z axes Guides of all linear axes are designed as prestressed roller guides Hydro-pneumatic weight compensation of the Z-axis via 2 cylinders Stationary frame components made of mineral casting, movable main components made of grey or nodular cast iron Double beams in load- and thermosymmetric d ...
used
Stacker truck, walker, manual pedestrian stacker LOGITRANS type LF 1001 / 1600 Tool lifter series No: 051E04006100 Year of construction 2005 Load capacity: 1000 kg Lifting height: 1600 mm Fork length: 600 mm Platform size: 800 x 650 mm Total length: 1200 mm Total width: 800 mm Construction height: 1930 mm- Lifting by pumping movement with the traction dike- 2 lifting speeds approx. 36 strokes up to lifting height 1600 mm or approx. 10 strokes for 10 cm lifting height. - Driving by pushing hand fork stroke in single mast with free lift net weight 198 kg very good condition; used
used
Load capacity 2000 kg Hours ~300 Lifting mast telescopic mast Construction height 2365 mm Free lift 150 mm Lifting height 3584 mm Fork length 1150 mm Tyres POLYURETHANE Battery 24V 375Ah Battery year 2022 (was replaced at our request) Charger 230V Polyurethane drive wheel as well as track rollers -tandem-, 1 spare drive wheel OptiSpeed -electric- drawbar steering, Drawbar switch for driving with vertical drawbar, Fork -lattice box version 61mm thick-
new
Capacity/ ◆1000kgs. Raise/ ◆85-800mm. Fork width/ ◆550/685mm. Fork length/ ◆1150. Wheel/ ◆Nylon / PU wheels Wear parts can be reordered from us!
new
Capacity/ ◆ 1000/1500 kg Raise/ ◆ 85-800 mm Fork width / ◆ 550/685 mm Fork length / 1150 Battery/ ◆ 12V60Ah battery Wheel/ ◆ Nylon/PU wheels Wear parts can be reordered from us!
new
Capacity/ ◆2500/KGS. Fork width/ ◆540/680mm. Fork length/ ◆1150mm. Wheels/ ◆Nylon / PU / Iron wheels Battery/ ◆12V/120AH Maintenance-free battery Charging method/ ◆External charger The product meets the quality requirements of the EU directive and is CE certified. Wear parts can be reordered from us
used
Level lifter, lift table, fork lift table, lifting platform WTT FÖRDERTECHNIK GmbH 414S load capacity: 1000 kg lifting fork 1050 mm long, flush width: 840 mm stroke: approx. 680 mm height retracted: approx. 30 mm height extended approx. 710 mm electro-hydraulic lifting function 180 bar 380 V with foot switch mobile by 2 rollers ! used, tested ! Dimensions: 1350 x 930 x 1350 mm (retracted)
used
Level lifter, lift table, fork lift table, lifting platform WTT FÖRDERTECHNIK GmbH 411S load capacity: 500 kg lifting fork 1140 mm long, flush width: 820 mm stroke: approx. 680 mm height retracted: approx. 80 mm height extended approx. 770 mm electro-hydraulic lifting function 180 bar 380 V with foot switch mobile through 2 rollers ! used, tested ! Dimensions: 1550 x 980 x 1280 mm (retracted)
used
Drum grab, hot-dip galvanized JUNGHEINRICH load capacity: 1600 kg for holding one or two rolling tyres or Beading drums or plastic L-ring drums fork spacing: 540 mm fork cross-section: 150 x 65 mm used, tested ! Dimensions: 1300 x 960 x 930 mm
used
x-travel: 3000 mm y-travel: 4000 mm z-travel: 1500 mm Control: Heidenhain TNC 430 M total power requirement: 120 kVA weight of the machine ca.: t dimensions of the machine ca.: m 3/5 axes CNC portal milling machine with integrated C-axis and changeable milling heads. The machine had a purchase price of € 1.4 million in 2002. An inspection in the sellers plant under power is possible after previous appointment. Condition: The machine was overhauled in 2018, costs of over € 100.000,-. - Drives of the X-axis renewed - New hydraulic power unit - Complete electrical wiring renewed - Spindle cooling unit new - 2 pieces longitudinal conveyors new - Coolant pump new - Cover complete X-axis new - Bellows Y-axis new - Exchange measuring ruler X-axis - Fork head spindle bearing new Belleville spring assembly new Drive motor A-axis new Spindle cone ground - Overhaul milling gear (2020) Working r ...
used
Key data: 1000 KG
Producer: Stanley Vidmar Type: HAZMAT Dimensions: 7500 x 3581 x 4741 mm Construction: 2008 Load capacity of racks: 1000 kg Column load capacity: 4000 kg Number of shelves: 60 pcs Number of legs: 16 pcs The equipment is a hand-operated stacking crane with a forklift, the purpose of which is to serve the storage rack of the STAK system. The nominal lifting capacity of the crane is 1000 kg. On the stand, the loads are stored on removable sheet steel pallets (pallets) with a permissible load capacity of 1,000 kg each. The load is placed with the crane together with the pallet or lifted. The design of the rack structure allows the pallets to be arranged according to requirements with a height division of 98 mm. The crane moves in the area between the rows of racks mounted on both sides and even has an outlet section at one end of the rail for loading with a forklift. A pair of rig ...
used
Drum turning pliers, drum grab PFEIFER, DENIUS type: 150247 load capacity: 300 kg gripping range: 400 - 620 mm fork distance: 390 mm ( center - center ) fork cross-section: 185 x 70 mm crane eye: 100 x 50 mm Material: steel, lacquered as good as new ! Dimensions: 1050 x 850 x 250 mm
used
hydr. Side stroke and fork adjustment 2400 mm fork length 12 t stroke
used
Drum lifter, drum grab BAUER RS-I/MK Load capacity: 800 kg For filled 200 l steel drums, steel lidded drums, roller tire drums and 220 l plastic L-ring drums Fork spacing ( center - center ): 400 mm Fork cross-section: 170 x 65 mm Entry depth: 1000 mm Surface: painted used, tested ! Dimensions: 1350 x 600 x 920 mm
used
x-travel: 3.000 mm y-travel: 1.600 mm z-travel: 1.200 mm control: HEIDENHAIN iTNC530 HSCI B-axis (swivelling head): +/- 100 ° C-axis (milling head rotation axis): +/- 240 ° feed and rapid traverse: : rapid feed Y,X,Z: 40.000 m/min Rapid traverse B- and C-Axis: 50 rpm Accelerations (X, Y and Z): 4 m/s² Machine table:: : Clamping surface: 3.500 x 1.750 mm T-slots: 27 x 22 mm H12 T-slot - distance: 125 mm max. workpiece load: 7.000 kg/m2 Max. distance table to spindle nose: 1.356 mm 2-Axis Fork Milling Head T21C: turning speed range:: 10- 24.000 min-1 Drive power (S1/S6):: 42/50 KW Torque (S1/S6):: 67/84 Nm Tool bore: HSK-A 63 tool magazin:: : number of tools: 50 tool holder: DIN 69873 HSK A63 Max. Ø tool: 115 mm max. tool-Ø adjacent slots free : 125 mm max. tool length: 300 mm max. tool weight: 12 kg coolant equipment: : tank capacity: 1.400 l connected load: voltage: 3x 40 V 50 Hz ...
used
ID2982 Manitou MT1745 year/Year of construction 2004 approx. 7000 hours/hours Telehandler, with 2 outriggers, with fork telescopic handler, with 2 outriggers, with fork
new
NEW Volvo pallet fork suitable for L50-L120 wheel loaders, as well as Komatsu, Liebherr, CAT etc., 1200mm fork length (150x50mm tines 5.8t load capacity) & 2000mm carrier width FEM3
new
Hub25T Pallet truck Lifting capacity 2500kg Fork height 85- 200mm Fork dimensions 550 x 1150mm Weight 60kg G&HM-HUB25T
new
Weibert PHW 2508K Pallet truck Load capacity 2.5t Load width 540 mm Fork width 160 mm Fork length 800 mm Stroke range 85-200 mm Steering angle 186° Turning radius 835 mm LxWxH 1200 x 540 x 1235 mm Weight 60 kg G&STÜ-6152513
new
Weibert PHW 2508 Pallet truck Load capacity 2.5t Load width 540 mm Fork width 160 mm Fork length 1150 mm Stroke range 85-200 mm Steering angle 205° Turning radius 1281 mm LxWxH 1550 x 540 x 1235 mm Weight 67 kg G&STÜ-6152512
new
Weibert PHW 2507L Pallet truck Load capacity 2.5t Load width 540 mm Fork width 160 mm Fork length 1800 mm Stroke range 85-200 mm Steering angle 186° Turning radius 1790 mm LxWxH 2190 x 540 x 1240 mm Weight 100 kg G&STÜ-6152511
new
Weibert PHW 2508K Pallet truck Load capacity 2.5t Load width 540 mm Fork width 160 mm Fork length 800 mm Stroke range 85-200 mm Steering angle 186° Turning radius 835 mm LxWxH 1200 x 540 x 1235 mm Weight 60 kg G&STÜ-6152513
used
Description: Full electric stacker. Rated load :1000kg. Load centre distance:500mm. Lift height:1600mm. Total height when lowered:2080mm. Max height after lifting:2080mm. Handle height form the ground:1440mm. Wheel:pu. Drive wheel size:ф250×80mm. Balance wheel size:ф100×55mm. Load wheel size:ф80×70mm. Total length(pedal no open:2070mm. Total width:810mm. Fork size(plank press:60x170x1100mm. Fork size(forge:40x100x1150mm. Turning radius:1600mm. Lifting speed(no load/full load):0.08/0.1m/s. Falling speed(full load):0.15/0.12m/s. Drive speed(full load/no load):4/5.6km/h. Climbing ability(no load/full load):6/10%. Lift motor:2.2kW. Drive motor:1.5kW. Battery :12V/120Ah x2. The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 780 x 1,900 x 2,080 mm, weight approx.: 465 kg
used
Description: Hand Pallet truck Fork dimensions 160 x 1140 mm / Total fork 530 x 1140 mm Approx. Onsite Dimension. (l x w x h): 1,600 x 530 x 1,200 mm, weight approx.: 75 kg
used
We sell a Czwaluk lift truck here. This lifting tipper was designed and built by us. The frame is made entirely of stainless steel has a maximum load of 600kg, a tipping height of 2800mm with a tilting angle of 45., This lifting tipper can be manufactured for you according to your wishes. Whether tipping height or boiler fork , anything possible.
used
Cat-Nr. 09-2090 new cubic Standard Features: • Outer Dimensions: 1050 x 1050 mm • Height Body Tank: approx. 1550 mm • Height Tank incl. Feet: 2000 mm • Material AISI 304 – Material Thickness: Tank 1,5 mm / Feet 2,5 mm / Hooks for Transport 2,5 mm • Weight: 154 kg • Volume: 1500 Liter • Manhole on the Top 400 mm - Lid with 4 Screws and Clamps with Bunging NW 50 (as per Photo below) • Bottom in Symmetrical Shape • Outlet Discharge DN 65 • Reinforcement 150 mm in each Corner of the Tank • Surface: outside marbled – inside IIID • stackable – 3 in empty, 2 in full • transport possible with Hand-Lift or Fork-Lift Surcharges / unit (upon request): Butterfly Valve DN 65 Butterfly Valve DN 50 Closing Cap for Outlet Reducing Unit NW 65/40 or 65/50 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-909052 ...
used
Cat. No. 12-2945 New Material: V2A - AISI 304, 1.4301 Surface: inside and outside 2B=IIIC Topsoil: stable stack crown Manhole lid DN 400 6 x Star Head Eye Screws 1 x Threaded welding nozzle DN 50 with blind cap 1 x Overpressure valve 1 x CO2 ventilation valve Body: 4 x Beading stiffeners Underbody: forward pulled outlet pipe DN 50 Cone floor 4 feet, very stable design with pallet truck underpassable with forklift shoes for fork holder Supplement (on request): Fermentation spandconnection DN Trial tap Blind cap DN 50 Fermented spundar fitting CIP Cleaning The price is for a tank. Weight 85 kg Height 1410 mm Diameter 700 mm Cylinder height 750 mm Material AISI304 (V2A) 1.4301 Test pressure 3.4 bar Construction form vertical Working pressure range +2/-0.15 b ...
used
Capacitive Rod electrode type 23.02 ex with WHG approval Manufacturer: Vega Grießhaber KG Type: 23.02 ex Overfill protection by means of a vibrating level switch as a swing fork sensor in compact design with threaded connection, pipe extension, as well as one in the Sensor housing built-in two-wire electronics. The probe is a general-purpose vibrating level switch for all liquids. Regardless of the mounting position she detects the level of border safe and perfectly. The instrument can be full or empty message, as approved overfill or dry running pump protection be used in containers. The position of the switching point is set via the tube extension. The probe offers highest reliability and security in a wide range of applications. New price: approx. 900
used
Tool cabinet for bending tools pull-out drawers, allows the two-sided access to the tools -any adjustment of the inserting roofs -robust steel construction, powder-coated, in any colors of the RAL pallet -side fork guide rails for transport by means of forklifts (cavity under the cabinet) -the drawers run on roller slide rails (serve as additional stabilization) . number of drawers: 4 squares - Mass of a drawer : - total height 1200mm / total width 850mm / total depth 1050mm - mass of the faeces set in a drawer: compartment heahe on 210mm (is varriabel) technical height can be used in total without intermediate boeden 990mm compartment width usable 130mm depth usable 980mm - number of intermediate boeden: 3 stubs ; ready for use
used
Tool cabinet for bending tools Suitable for WILA/TRUMPF Tools or type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -extendable drawers, allows the two-sided access to the tools -arbitrary adjustment of the inserting roofs -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) run drawers Roller slide rails (serve as additional stabilization) - the cabinet can be disassembled - number of drawers: 4 sets - Mass of a drawer : - total height 1200mm / total width 850mm / total depth 1180mm - Mass of the Fa echer in a drawer: compartment hoehe set to 210mm (is varriabel) technical height total usable without intermediate boeden 990mm - specialist width usable 130mm depth usable 1100mm - Number of intermediate boeden: 4 Stueck / completely continuous; new ready for use
used
Tool cabinet for press brake Good for WILA / TRUMPF tools or Type B L / W / H: 1180 mm x W 850 mm / H 1200mm, 350kg -ausziehbare drawers, allows the double-sided access to the tools -beliebige height adjustment of shelves -robust steel construction, powder coated -Lateral fork guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) -The cabinet can be dismantled - Number of drawers: 4 pieces - Dimensions of drawer: - Total height 1200mm / 850mm total width / total depth 1180mm - Dimensions of the compartments in a drawer: - Fachhhoehe adjusted to 210mm (is varriabel) - Trade Height total usable ohnen shelves 990mm - Trade width 130mm available - Trade depth usable 1100mm - Number of shelves: 4 pieces / completely continuous; "ready for operation"
used
Tool cabinet for bending tools / exhibition object suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg - for AMADA/Promecam tools -extendable drawers, allows double-sided access to the tools -any adjustment of the inserting roofs -robust steel construction, powder-coated -side fork rails for transport by forklift (cavity under the cabinet) -the drawers run on roller slide rails ( serve as additional stabilization) -the cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Fachbreite usable 130mm - Technical depth usable 980mm - Number of intermediate boeden: 3 stueck
used
Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece
new
Tool cabinet for bending tools suitable for AMADA/PROMECAM or type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allows the two-sided access to the tools -any adjustment of the inserting -robust steel construction, powder-coated -side fork guide rails for transport by means of forklifts (cavity under the cabinet) -the drawers run on roller slide rails (serve as additional stabilization) Cabinet can be disassembled - Number of drawers: 4 squares - Mass of a drawer : - Total height 1200mm / Total width 850mm / Total depth 1050mm - Mass of the faeces in a drawer: compartment hhoehe set to 210mm (is varriabel) - Fachhoehe total usable without intermediate boeden 990mm - Tray width usable 130mm - Depth usable 980mm - Number of intermediate boeden: 3 stueck
new
Tool cabinet for press brake Good for AMADA / PROMECAM or Type A L / W / H: 1050 mm x W 850 mm / H 1240mm, 310kg -extendable drawers, allowing access from both sides of the tools -any height adjustment of shelves -sturdy steel construction Fork-lateral guide rails for transporting by forklift (cavity under the cabinet) -The drawers run on Rollengleitschienen (serve as additional stabilization) , the cabinet can be broken - Number of drawers: 4 pieces - Dimensions of a drawer: - 1200mm Overall height / Overall width 850mm / 1050mm Overall depth - Dimensions of the compartments in a drawer: - Fachhhoehe set to 210mm (is varriabel) - Total compartment height 990mm shelves available ohnen - Usable shelf width 130mm - Usable shelf depth 980mm - Number of shelves: 3 piece
used
Side forklift JUMBO 5 t with fork adjustment, very good contition!; good
used
Double Decker - stackers, fork length 1150 mm, operating hours stand 13.01.2012 approximately 779, unladen weight 870 kg, capacity 2000 kg, height 2100 mm, charger; very well
new
Manufacturer: CATERPILLAR Type: V 250 Capacity: 12000 kg Lift Height: 3710mm Boom height: to insert moulds of fork length: 1400mm width: 2550mm Overall length: 6400mm; ready for operation
used
DATA ON THE MACHINE Machine type: Front forklift / forklift Manufacturer: CLARK Model: CGC 70 Built: 2001 Condition: very good (used) Price 22,500 Euro net plus VAT Location Warstein , Germany Reference M-CLA-0820 Description We offer you a used forklift from the manufacturer Clark. Very low centre of gravity (bandages tyres) and very compact forklift. Very good converter, perfect for complicated machine transports. Technical data Payload 7000 kg Weight 9100kg Lifting height 3300mm Tree width 1400mm Fork length 1800mm 2 gear gearbox Engine hours 2595h (demonstrable) Machine comes first hand, all repairs were carried out by a specialist company. The paint is original! Rental from mid-September is possible. The hours may of course vary, as the forklift is in use! Our offer is aimed at professionals who are covered in accordance with the Trade C ...
used
For the loading or unloading of drums from trucks and containers, for the discharge palletizing or converting barrels in a shop or a factory site. Technical specification -SWL: 750 kg - introduction of the fork:-weight: 80 kg
used
Telescopic forklift/ off-road forklift with four-wheel drive and rotatable top car Manufacturer Manitou Type MRI 1640 Built in 2011 Top condition! Only about 4,500 hrs Expert opinion on obtaining a business run for road traffic! Type of drive : Diesel Capacity: 4,000 kg Load center of gravity: 500 mm Safety device/lasthebe limitation Weight: 13,000 kg Tyres: 4 x air 400/70 - 20 14 PR Lifting scaffold type : Telescope Lifting height: 15,800 mm Height: 2,970 mm Fork tin length: 1,200 mm Engine : PERKINS Steering: all-wheel steering, 3 steering types Hydraulic lines for attachments on the telescopic head with quick-release couplings Closed cabin with heating Two-part door Reversing warning signal Street lighting front+rear
new
From exposition Quick handling with with efficient electro - hydraulic pump. Places the load in the comfortable and ergonomically correct working position. Automatical activation of adjustable stabilizers when lifting higher more than 400 mm. Provided with bartery power level indicator. Polyurethane wheels. Supplied weith single piston rod. Can also be operated manually. Lifting speed with / without load: 19 /15 sec. Capacity: 1000 kg. Lifting height: 800 mm. Steering wheel diameter: 180 mm. Fork wheels diameter: 75 mm. Truck weight: 169 kg.
used
Machine type: Forklift / Forklift Manufacturer: Still Model: R33 Built: between 75 and 80 Condition: ready for use (used) Price 7,450 net plus VAT Location Warstein, Germany Reference M-STI-0121 Description We offer you a used forklift from the manufacturer Still Technical data: Capacity: 6t Weight: approx. 9t Engine hours: 9986h Width: approx: 2250mm Fork length 2000mm Tine adjuster max 2100mm tine outside Lighting: Headlights and Rear Lights UVV Test: 01/2022 Mercedes Motor The forklift is in use with us, jumps immediately in any weather. No electronics. Operating hours may still vary, as the forklift is in use. Our offer is aimed at professionals who are covered in accordance with the Trade Code in accordance with Section 14 GewO. The offer is subject to change, intermediate sale reserved. Please provide your full contact details to receive a ...
used
Stock number: 3283 FORK TRUCK Manufacturer: Hedin, type: EL-mover Machine no.: 280704, year: 2011 Specifications: Gr. lifting capacity 20000 kg Total power of 4 kW Max speed 46m / min self-propelled sprayer. Lift height 200 mm radio controlled length: 5755 mm, height: width: 4736 mm, weight: 8000 kg