fork used for sale

Hydraulic fork positioner 550-2000 mm Fork positioner hydraulically by 550-2000 mm, Stacker, has been in use at 2.5 to can be mounted but on any truck, mast, front loader, etc, with integral Sideshift. Adapter plate with mount slots for cultivation. Dimensions available upon request. Adapter plate surface area approx. 715 x 650 mm. Valve block hydraulic pump can be supplied. Sale and mistakes are expressly reserved. Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Product group Diesel forklift Brand Hyster H580 Year of build 1991 Additional options - Place Mülheim an der Ruhr Country Germany Price indication Select currency Price excluding VAT 35,000 VAT (19%) 6,650 Price with VAT 41.650 Details Hours of operation 5157 hours Max load capacity 28,000 kg Schwerpunt - distance 1,200 mm Lifting height 6,000 mm Fork drive Sideshift Fork length 2,440 mm Cabin Cabin Type of tyre Compressed air Motor Diesel Transport weight 48,000 kg Transport dimensions (L x W x H) 6.80 x 3.38 x 3.67 m

gebr. Fork kneader AO 170, for 80 kg flour, stainless steel fork, stainless steel boiler, overhauled

-Load capacity: adjustable from 600 – 3000 kg -Effective height : from 1300 – 2000 mm -Tine length : 1000 mm Fvmfedlvq -Tine cross-section : 120 x 50 mm -Total height: 1720 – 2420 mm -Net weight : 260 kg These crane forks are equipped with adjustable tines, height adjustment and automatic weight compensation. In the case of self-balancing forks, the support tines tilt upwards when the load is lifted. This prevents the load from slipping out unintentionally. The suspension eyelet is movably mounted via a subframe. The automatic self-balancing is carried out by a gas pressure spring when the fork is loaded. This ensures that the suspension point is always in the centre of gravity of the fork and that the load picked up is transported absolutely safely.

Electrohydraulic scissor fork stacker Lift truck, pallet truck for pallets TOYOTA / BT type HTH 10 E Fabr. No. 481795 Year of construction 2005 Load capacity 1000 kg Lifting height max. 800 mm Height drained 85 mm Fork length 1190 mm - Electric lift over 12 volts Battery operation - manual stroke via hand lever as in the pallet truck - TOYOTA Industrial Equipment Europe SARL (Made in France) - Long-stroke hydraulic cylinder - with single roller - integrated charger (mains voltage 230 Volt, with IEC plug) Net weight 140 kg good condition; used

Electric forklift JUNGHEINRICH type EFG 216 Serial No. FN413671 Year of construction 2011 Load capacity 1600 kg Lifting height 4800 mm Fork length 1220 mm Fork carrier width 980 mm Construction height 2120 mm Operating voltage 48 Volt- Triplex mast with full free stroke 1550 mm - hydraulic side shifter - 2 travel speeds - Battery from year of construction 2015, type 06 EPZS C750 SC (48 Volt, 750 Ah) - Automatic charger, 48 Volt - 3-wheel solid rubber - Tyres front 18 x 7-8, rear 140/55-9 - according to operating hours counter 14725 operating hours read - Auxiliary steering - Work lights front - New TÜV - UVV inspection Length without forks 2000 mm Total width 1080 mm Net weight without battery 2390 kg Net weight with battery 3480 kg ; used

Fork Sensor DL, DATALOGIC SRO-12 Ident- No. 98F89152 Fork opening: 17 x 5 mm 24 V DC approx. 2.0 m connection cable New ! Dimensions (sensor, without cable): 45 x 14 x 25 mm

Shaft forks 1 pair PAGUS 1300 x 800 x 100 mm fork width: 120 mm fork height: 40 mm shaft Ø: 50 mm used,, tested ! Dimensions: 1300 x 800 x 300 mm

Fork clamping iron with round clamping attachment, 4 pieces WMW C18 TGL35912 Total length: 200 mm Clamping attachment: Ø 24 mm, length: 35 mm for clamping screw M16 New ! Dimensions ( fork clamping iron ): 200 x 50 x 32 mm Dimensions ( packaging ): 200 x 100 x 65 mm

Fork, 3 pieces FIBRO 0.418.00220 52.85.3.-Sonder female thread: M14 x 1.5 thread length: 27 mm 2 arms: 34 x 12 x 32 mm Other quantities on request ! New ! Dimensions ( single fork ): 95 x 25 x 32 mm

Fork positioner with separate sideshift, hydraulic fork adjustment, sideshift, side lift, forklift blade, tine carrier -Manufacturer: SE Fahrzeugwerke, type 1/9953 -Load capacity: 860 kg -Tine length: 1000 mm -Tine width: 595 mm to 1800 mm -Dimensions: 1240/915/H610 mm -Weight: 272 kg

weight max. in kg: 2000 kg stroke: 6510 mm fork length: 950 mm : 2834 mm Number of working hours: ca. 600 h weight of the machine ca.: 4,2 t dimensions of the machine ca.: 2,65 x 1,3 x 2,85 m Diesel forklift - Diesel particulate filter - Sideshift - Fork adjustment - Triplex lifting mast - Drivers protection roof - Roof window including roof wiper system - many more additional options - MINT CONDITION The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Description: Fabrication number: 020944 Max. load capacity: 7000 kg Max. lifting height: 4000 mm Read operating hours: 6952 Fork length: 1500 mm With load center distance 600 mm up to lifting height 3300 mm Equipment: with automatic fork adjustment Incl. documentation Attention: a truck with access ramp is required to collect the forklift Approx. Onsite Dimension. (l x w x h): 5,000 x 1,800 x 2,950 mm, weight approx.: 10,000 kg

Fork contact level switch, level sensor VEGA VEGASWING 51 SG51. XXSGATPVL 2704838/1 max. immersion depth: 85 mm operating temperature: -40°C - +100°C Operating pressure: -1 - +64 bar operating voltage: 3,6 - 35 V DC current consumption: max. 250 mA Thread: G1 ( inch ) Material ( body and fork ): Stainless steel 316 New, with documents ! Dimensions ( level switch ): 210 x 55 x 39 mm Dimensions ( packaging ): 320 x 57 x 50 mm

Fork contact level switch, level sensor VEGA VEGASWING 51 SG51. XXSGATPVL 2956587/1 max. immersion depth: 85 mm operating temperature: -40°C - +100°C operating pressure: -1 - +64 bar operating voltage: 3,6 - 35 V DC Current consumption: max. 250 mA Thread: G1 ( inch ) Material ( body and fork ): Stainless steel 316 New, with documents ! Dimensions ( level switch ): 210 x 55 x 39 mm Dimensions ( packaging ): 320 x 57 x 50 mm

Fork photoelectric sensor BALLUFF BGL000R BGL20A-001-S49 10 - 30 V DC light type: LED red light fork width: 20 mm connector device plug: M8 x 1, 3-pin Material: zinc, die-casting, painted, glass ( active area ) New ! Dimensions (sensor): 58 x 40 x 10 mm Dimensions (packaging): 100 x 60 x 15 mm

Fork light barrier BALLUFF BGL0016 BGL 30A-001-S49 10 - 30 V DC light type: LED red light fork width: 30 mm connection device plug: M8 x 1, 3-pin Material: zinc, die-casting, lacquered, glass (active area) New ! Dimensions (sensor): 68 x 50 x 10 mm Dimensions (packaging): 100 x 60 x 15 mm

Fork photoelectric sensor DI-SORIC OGU 050 P3K-TSSL 201276 10 - 35 V DC / light type: LED infrared light fork width: 50 mm connection device plug: M8 x 1, 3-pin Material: die-cast zinc ( black, powder-coated ), glass ( active area ) New, with underlays ! Dimensions (sensor): 70 x 89 x 10 mm Dimensions (packaging): 113 x 88 x 33 mm

Description: Diesel forklift - Diesel particulate filter - Triplex lifting mast - Sideshift - Fork adjustment - Driver's protection roof - Roof window including roof wiper system - many more additional options - New condition Load capacity in kg 2000 kg Stroke 6510 mm Fork length 950 mm Height 2834 mm Operating hours approx. 600 h Machine weight approx. 4.2 t Space requirement approx. 2.65 x 1.3 x 2.85 m Approx. Onsite Dimension. (l x w x h): 2,650 x 1,300 x 2,850 mm, weight approx.: 4,200 kg

Description: BULMOR BMS 50 electric multidirectional forklift - very rarely used (built 07/2021) Max. load capacity 5000 kg , Max. lifting height 6000 mm Fork length 2150 mm Batteries 80 V Central third fork 47 hours of work serial number: BME 9213, Approx. Onsite Dimension. (l x w x h): 3,430 x 3,200 x 2,870 mm, weight approx.: 11,700 kg

Description: Nominal drive power 2 x 12.5 kW Sideshift function Additional pair of forks, length approx. 1200 mm Additional fork extension, fork length 1800 mm With charger Road approval last inspection 10/2020 Read off operating hours: 578 h, loading capacity: 4 to, lifting height: 4,735 mm, length of forks: 1,800 mm, Approx. Onsite Dimension. (l x w x h): 4,500 x 1,600 x 2,400 mm, weight approx.: 8,000 kg

Operating voltage: 12 ... 35 V DC; Open circuit current (max.): 35 mA; Insulation dielectric strength: 500 V; Leg length inside: 80 mm: Case dimensions: 110 x 115 x 10 mm; Case length: 115 mm; Case height: 110 mm; Case width: 10 mm; Housing material: Aluminum (black, anodized) Principle of operation: Optical; Evaluation: digital, difference; Design: Fork; Switching output: pnp, 200 mA, NO/NC, switchable; Voltage drop (max.): 2.5 V; Light source: LED; Color: Infrared; Modulation: unclocked; Ambient light safety: 5 kLx; Fork width: 90 mm; Resolution: Ø 0.25 mm; Switching hysteresis (max.): 0.2 mm; Reproducibility: 0.01 mm; Sensitivity Setting: Potentiometer; Switching frequency: 5000 Hz; Connection: Plug, M8, 3-pin

Operating voltage: 10 ... 30 V DC; Open circuit current (max.): 30 mA; Insulation dielectric strength: 500 V; Inside leg length: 55 mm; Case dimensions: 100 x 80 x 10 mm; Case length: 80 mm; Case height: 100 mm; Case width: 10 mm; Housing material: die-cast zinc (black, powder-coated); Principle of operation: Optical; Evaluation: digital; Design: Fork; Switching output: push-pull, 100 mA, NO/NC, switchable; Interface: IO-Link (V1.1, COM2 38.4 kBd, Smart Sensor Profile); Light source: LED; Color: Red; Modulation: clocked; Fork width: 80 mm; Resolution (factory default): 0.3 mm (STANDARD); Reproducibility (factory setting): 0.02 mm (STANDARD); Resolution (STANDARD): 0.3 mm; Reproducibility (STANDARD): 0.02 mm; Resolution (HIGH RESOLUTION): 0.2 mm; Reproducibility (HIGH RESOLUTION): 0.02 mm; Resolution (POWER): 1 mm; Reproducibility (POWER): 0.02 mm; Resolution (SPEED) ...

Operating voltage: 10 ... 30 V DC (Supply Class 2); Open circuit current (max.): 30 mA; Insulation dielectric strength: 500 V; Inner leg length: 60 mm; Case dimensions: 144 x 90 x 12 mm; Case length: 90 mm; Case height: 144 mm; Case width: 12 mm; Case Material: Die-cast zinc (powder coated); Material: Mineral glass (optics); Principle of operation: Optical; Evaluation: digital; Design: Fork; Switching output: push-pull, 100 mA, NO/NC, switchable; Interface: IO-Link (V1.1, COM2 38.4 kBd, Smart Sensor Profile); Light source: LED; Color: Red; Wavelength: 660 nm; Modulation: clocked; Fork width: 120 mm; Resolution (factory default): 0.5 mm (STANDARD); Reproducibility (factory setting): 0.02 mm (STANDARD); Resolution (STANDARD): 0.5 mm; Reproducibility (STANDARD): 0.02 mm; Resolution (HIGH RESOLUTION): 0.3 mm; Reproducibility (HIGH RESOLUTION): 0.02 mm; Resolution (P ...

There are new carriage/forklift tines in good condition for sale! You are not bent! Dimensions: Length: 120 cm, fork height: 41.5 cm = approx. 41.5 cm, distance of the recording, a visit is possible by arrangement only pick up. Private sale

Manufacturer: Yale Type: MOS10 Type: Carrying capacity: 1000 kg Mast: standard Battery: 24V, 375Ah lifting height: 1600mm number of tyres front: 2 Number of tyres rear: 2 Ideal for the following applications: Scales transports over long distances; Laengerer operating cycles and multi-shift operation; storage equipment in low or medium-high and high shelving systems; Ergonomic features 5-point wheel rest and fixed stabilizing wheels ensure increased stability and greater safety when cornering. Without mounting gear and fork!

Forklift Hyster, model S7. 00XL, SN: BO24D04237T, nominal power 61.5 kW, capacity 7,000 kg, empty weight 9.310 kg, b. In 1996, Betreibsstd. approximately 11000, collgummibereift, particle soot filters, hydraulic fork adjustment. The forklift is available IN DORTMUND, GERMANY

weight max. in kg: 2500 kg stroke: 3200 mm fork length: 1000 mm Drive: Gas Side shift: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 4,25 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

5To pallet fork

weight max. in kg: 4000 kg stroke: 3200 mm fork length: . mm power fuel: Diesel weight of the machine ca.: 6,43 t dimensions of the machine ca.: 4,8x1,5x2,4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Crane fork Fabr. PFAFF type LM 2/20Fabr. -No: 800471/1 Year 1998Capacity: 2000 kgLoad center distance: 0.5 mFork length: 1100 mmFork width max: 1000 mmWeight: 153 kgused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Crane arm for forklift STABAU Type KR 15 Fabr. No. 003-14276 Year of construction 1986 Nominal load 1500 kg load capacity at 450 mm radius 1500 kg load capacity at 750 mm radius 1100 kg load capacity at 1200 mm radius 750 kg Suitable for fork carrier FEM 2 = 403 mm Load hook adjustable in 6 steps Total height of the crane arm 1350 mm Boom profile 110 x 110 mm on mobile transport frame good condition; used

Description: Lot Fork Tines (4 pcs.) Approx. Onsite Dimension. (l x w x h): 1,800 x 800 x 300 mm, weight approx.: 150 kg

The hydraulic brake with the valves have been renewed, the control unit of the lifting mast, control lever for lifting, lighting system repaired, the drive battery 80 V is no longer new but can still be used for normal use, the attachment including fork positioner has signs of wear, the current failure of the attachment has to do with a cable break in the rear control area, with cab and charger, UVV and maintenance up to date.

Linde forklift, electric powered, 4 forks, fork length: 1200 mm, total dimensions: 3900 mm x 1200 mm x 2300 mm. With battery charger, serial number: 0387612-0010-001, year of construction: 2012.03.

fork head new, galvanized 6,80€ piece Forkhead new, galvanized 6,80€/ piece Support leg / tripod / tripod newly galvanized. 24,00€/ piece all prices excl. VAT and transport Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ warehouse address: Birkenstrasse 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Register court Ulm: HRA722943 VAT ID NO.: DE279047055

Self-loading truck-mounted forklift CDD05 - Electric for 500kg This self-loading electric truck-mounted forklift is suitable as a truck-mounted forklift for delivery vehicles or for trucks without a loading ramp. It automatically loads itself to the next higher level. Thanks to this special pallet truck, power and nerves can be spared during loading and unloading - especially if there is no lifting platform. This model can also be used for pure transport work up to 500 kg. It is used in logistics, goods handling and is also designed for tough everyday industrial use. Special pallet trucks for everyday industrial work Self-loading and electric Load capacity of 500 kg with a fork length of 1050mm Maximum lifting height of 1300 mm NEW - Pick-up in 74722 Book

Fork bearing block for hydraulic cylinder, 2 pieces PAGUS LD16N DIN 24556 with bolt BA-19 and locking plate A-16 diameter: Ø 16 mm, length: 50 mm base plate: 96 x 83 mm hole spacing: 70 / 55 mm 4x bore: Ø 11 mm New ! dimensions ( single bearing block ): 96 x 92 x 66 mm

Manufacturer: Clark Gabelstapler, Type: CGP 25, Year: 1999, Drive type: Gas, Construction type: Frontstapler, Lift mast type: normal, Fork length in mm: 1250, Operating hours: 3414-7, Lifting power kg: 2500, Lifting hight approx. mm: 3300, FREE TEXT: Seitenschieer, Year :1999

Manufacturer: Yale, Type: GLP30VX V2395, Year: 2010, Fork length in mm: 1200, Lifting power kg: 3000, Lifting hight approx. mm: 3505, Total power kW: 38, Wight approx. kg: 4250, Year :2010

Manufacturer: Linde, Type: H 30/Diesel, Year: 1991, Drive type: Diesei, Lift mast type: Triplex, Total hight mm: ca., Fork length in mm: 1370, Lifting power kg: 3000, Lifting hight approx. mm: ca.3250, FREE TEXT: Vollgummibereifung 4-fach vorne hinten normal/verbreiterte Gabelaufnahme 1720 mm, Year :1991

Manufacturer: Linde, Type: E 30-02, Year: 2004, Drive type: elektro, Lift mast type: Duplex, Total hight mm: 2300, Fork length in mm: 1300, Operating hours: 5463,5, Lifting power kg: 3000, Lifting hight approx. mm: 3640, FREE TEXT: Kabine/Joystick steuerung/Sitzheizung/Heizung/Gabelverbreiterng/Ladegerät/Verfügbark eit, Year :2004

Hub Fork Kneader Dough Kneading Machine TBM Tecnopast T300ETT -Dough kneading machine with 2 stainless steel bowls -3 machines with 2 boilers each -Manufacturer: TBM Tecnopast -Model: T300ETT -Year of construction 2010 -400V 3 50Hz -kW: 8.0 / 10.6 -Weight: 1690 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1190mm -Cross section: 150 x 65 mm - Recording: see technical drawing in the photos -Transport dimensions: 1430/910/H190 mm -Weight: 280 kg

Forklift shovel, hydraulic forklift shovel, light material shovel, tipping shovel, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1180 mm -Cross-section: 150 x 60 mm -Recording: see technical drawing in the photos -Transport dimensions: 1400/905/H185 mm -Weight: 264 kg

Forklift shovel, hydraulic forklift shovel, light material shovel, tipping shovel, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1110 mm -Cross-section: 150 x 50 mm -Recording: see technical drawing in the photos -Transport dimensions: 1290/700/H150 mm -Weight: 202 kg

Forklift shovel, hydraulic forklift shovel, light material shovel, tipping shovel, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 700 mm -Cross-section: 140 x 50 mm -Recording: see technical drawing in the photos -Transport dimensions: 845/945/H140 mm -Weight: 186 kg

Forklift shovel, hydraulic forklift shovel, light material shovel, tipping shovel, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1000 mm -Cross-section: 120 x 40 mm -Recording: see technical drawing in the photos -Transport dimensions: 1155/700/H120 mm -Weight: 132 kg

Forklift shovel, hydraulic forklift shovel, light material shovel, tipping shovel, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 900 mm -Cross-section: 100 x 40 mm -Recording: see technical drawing in the photos -Transport dimensions: 1020/565/H100 mm -Weight: 98 kg

Forklift shovel, hydraulic forklift shovel, light material shovel, tipping shovel, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 920 mm -Cross-section: 125 x 40 mm -Recording: see technical drawing in the photos -Transport dimensions: 1070/600/H125 mm -Weight: 136 kg