fori automation used for sale

20 hl brewhouse delivered by ANT in 2014, available - 20 hl 3-vessel, mash mixer, lautertun, brewkettle/whirlpool, steam heated, with semi-automation. - 25 hl HLT - 200 kW natural gas steam generator (made by Manara, Italy) - Plate HX for cooling wort, with aeration system and 30 l in-line yeast vessel - Glycol chiller with tank - Brewhouse platform - Malt mill (made by Sommer, Germany) - Various piping, valves etc. The equipment is of good quality

There are three identical superfinish machines Nagel available, connected load: 11kW, controls: SIEMENS SIMATIC HMI, length: 2565mm, width: 2600mm, height: 2663mm, operational hours counter: 34,051h, year of construction: 2x 2015, 1x 2014, with documentation, there are additionally two automations Promot available.

X-travel: 3700mm, y-travel: 2200mm, z-travel: 200mm, table dimensions: 4000x2300mm, connected load: 23kW, length: 5000mm, width: 3300mm, height: 2350mm, weight: 1,2t.

Z-Splicing Machine Make: Z-AUTOMATION Model: Z splicing stand alone Year 2014 8 kW, 6 bar Profile Cross sections 50 x 40 mm 2 - 4 splicing cavities Length 4600 mm Siemens Simatic HMI touch screen control Foot pedal control Emergency kill switch

Touch Panel, Touchscreen Display, Control Panel AUTOMATIONDIRECT EA7-S6C ( EA7S6C ) 06511B002 Display diagonal: 6 inch 24 V DC 11 W used, tested ! Dimensions: 205 x 170 x 55 mm

X-travel: 500mm, y-travel: 400mm, z-travel: 300mm, table dimensions: 370x900mm, max. workpiece weight: 25kg, controls: ProNC, including various spare parts, power cables and control cables, without documentation, the computer is a 1.6GH processor with Windows XP, a dongle is required, which is available, the spindle can only be switched on manually, has been serviced regularly.

Used packaging machine MC2 DT with transporter MCA4 DB. 3 pieces available. New 2011-2013. Technical data: Type of machine - wrapping machine (double twist) Operation - electromechanical, Mains supply - 230/400 B 3 phases + U Frequency - 50 Hz Operating pressure - 6 bar Flow rate - 0.5 Nl/min Weight - 1700 kg

Crane control KOCKUMS AUTOMATION MUSCLES TYPE-SS3 220 V AC 50 / 60 Hz 10 A used, tested ! Dimensions: 490 x 310 x 140 mm

Suitable for the production of 2D/2.5D laminate stacks from thermoset semi-finished products in the Fiber Placement process, speed: 60m/min, laying area: 1100x1400mm, with documentation, on-site inspection is possible.

Overview  The carry handle applicator was manufactured by the German company project Automation & Engineering GmbH in 2013 and until recently was part of a PET filling line at a large Austrian beverage bottler. The carry handle applicator is now becoming free as the owner is investing in a completely new line. Technical data  Total output: 100 cycles/min (2x 50 cycles/min per lane)  Two lanes   Dimensions (LxWxH): 2500 mm x 1950 mm x 2902 mm Tape length (total/insert): 480 mm/ 250 mm Tray (length/ width): 174 mm/ 264 mm

With documentation, an inspection is possible.

There are one FLEX Sleever and one ein FLEX Packer available, output: 1400 stacks/h, product dimensions: 65x300-765mm, box dimensions: 400-800x300-515x230-570mm, year of construction machine 1/ 2: 2018/ 2019, with documentation, the machines were hardly used.

A conveyor system is available for the transfer of Euro pallets to a warehouse automation, suitable for weighing, barcode scanning of the pallet, optional film wrapping, measuring, output to two output places or in case of error to a separate place, with pallet wrapper C&C group C-ONE EXTREMA, pallet dimensions: 1200x800mm, max. pallet weight: 1t, including documentation, control cabinets and accessories.

Machine control AUTOMATIONDIRECT, KOYO Direct Logic 205 1 x D2-09BDC1-1 1 x DL250-1 CPU, 1x 32CDD-R 1 x D2-16ND3-2, 1x D2-16TD2-2 2 x F2-08AD-1, 1x F2-08AD-2 1 x F2-02DA-2, 1x F2-04THM 12 - 24 V 25 W used, tested ! Dimensions: 360 x 95 x 95 mm

Touch Panel, Touchscreen Display, Control Panel AUTOMATIONDIRECT EA7-T8C ( EA7T8C ) 06X16B011 Display diagonal: 8 inch 24 V DC 15 W used, tested ! Dimensions: 280 x 225 x 55 mm

There is one bottle packer A+F Contiflex with an integrated tray erector A+F Multiformer available, max. output: 220 bottles/min, connected load: 14kW, length: 7789mm, width: 1977mm, height: 3284mm, operational hours counter: ca. 600h, with complete documentation, an inspection is possible.

Electronic Module, Machine Control KOYO, AUTOMATION DIREKT Direct LOGIC 205 Ethernetcotroler H2-EBC Digital Input Module D2-16ND3-2 -Digital Output Module D2-16TD2-2 Analog Input Module F2-08AD-2 Base Module D2-04BDC1-1 12 - 24 V DC 25 W used, tested ! Dimensions: 205 x 90 x 100 mm

Max. weighing range: 1000g, with Weighing Cell Mettler Toledo TF10-L-P, display of weight values, weight classification and automatic sorting of weighed goods.

Suitable for testing steel drums for tightness, drum diameter: 574-598mm, max. drum weight: 30kg, drum temperature: 10-50°C, with documentation.

Automation of the packaging process, including (1) Industrial Robot Kuka KR 3, weight: 53kg, year of construction: 2005 (2) 2x Labelling Machine Etipack SURPRISE 13, year of construction: 2007.

KUKA robots are used in a wide range of applications, e.g. handling, welding, assembly, packaging and other automation tasks. Payload: 10kg, reach: 900mm, weight: 52kg. On-site inspection is possible.

Frequency converter, motor control, drive inverter, inverter AUTOMATION DIRECT GS1-21P0 W703111 1,6 kVA Input: 200 - 240 V 1AC / 3AC 9.7 / 5.1 A 50 / 60 Hz Output: 0 - 240 V 3AC 4.2 A 0 - 400 Hz used, tested ! Dimensions: 140 x 70 x 130 mm

RS485 Fail-Save Termination FELD-AUTOMATION FST485-230 Supply voltage: 230 V AC Output voltage: 5 V DC new ! Dimensions: 90 x 18 x 60 mm

Machine control AUTOMATIONDIRECT, KOYO Direct Logic 205 1 x D2-09BDC1-1 1 x DL260-1 CPU 2 x D2-16ND3-2 3 x D2-16TD2-2 1 x F2-08AD-1 1 x H2-ECOM100 1 x H2-ERM 12 - 24 V 25 W components also available used, tested ! Dimensions: 360 x 95 x 95 mm

KITAKO HS4200N Multispindle CNC Lathe YEAR 2007 NO. OF SPINDLES 4 (2 TURNING / 2 LOAD & UNLOAD) SPINDLE TYPE A2-6 SPINDLE SPEED 4,500 RPM SPINDLE MOTOR (HP) 20HP X - AXIS TRAVEL (INCHES) 6.3" Z-AXIS TRAVEL (INCHES) 9.9" MAX TURNING DIAMETER 7.8" MAX TURNING LENGTH 4" FEED RATES (X/Y/Z AXIS) 6693 IPM / 4724 IPM / 2165 IPM CHUCK SIZE (INCHES) 8" (NOT INCLUDED) 2 NOS 8 STATION TURRETS WITH COOLANT THRU TOOLS CARRIER INDEX 1.5SEC/180DEGREE, 1SEC/90DEGREES DIA CURVEIC COUPLING 28.35"WITH 10,780LBS CLAMPING FORCE MACHINE EQUIPPED WITH BOX SLIDEWAYS FOR X & Z AXIS CHIP AIR BLOW DEVICES FOR LOADING CHUCKS - 2 NOS CHIP CONVEYOR HIGH PRESSURE COOLANT (100PSI) MULTIPLE REPETITIVE CYCLES G70 - G76 TOOL LIFE MANAGEMENT TOOL GEOMETRY OFFSET 2 SPINDLE ORIENTATION FOR THE LOADING SPINDLES FANUC ROBOTIC AUTOMATION SYSTEM (2 ) LR MATE200/C/R-30IA MATE ROBOTS (2) ROBOT RISERS (2) END  ...

Bus controller, with power supply module and bus transmitter B&R AUTOMATION X20 BC 0063 PROFIBUS DP V0 Slave Power supply module: X20 PS 9400 Bus transmitter: X20 BT 9100 used, tested ! Dimensions: 105 x 52 x 80 mm

Year of construction: 2011 Control Siemens 840 Dsl Rotation diam. [mm] 250 Spindle: Motor spindle technology Speed 6,000 rpm Power (max.) 39 kW Torque (max.) 460 Nm Clamping cylinders Full clamping cylinders Workpiece clamping 3-jaw chuck, SMW autoblock, KNCS-NB-260-72 Tool carrier I: Technology turret with 12 stations Tool holder VDI 40 Tool drive 6,000 rpm, 7.5 kW, 24 Nm Tool carrier II: Technology:Drilling station with IK feed Tool holder Capto C8 General: Travel in X/Z 1,180/525 mm Rapid traverse in X/Z 60/30 m/min Equipment/accessories: Displacement measuring system directly in X/Z (glass scale) Chip Management Chip Conveyor Coolant management IKZ system with paper belt filter and high pressure Tool breakage monitoring ARTIS CTM Automation of circulating workpiece storage, L-type Oil mist extraction Electrostatic separator, IFS IFE2000

Electronic Module, Machine Control KOYO, AUTOMATION DIREKT Direct LOGIC 205 ( LOGIC205 ) Ethernetcotroler H2-EBC Digital Input Module D2-16ND3-2 Digitaleses Output Module D2-16TD2-2 Analog Input / Output Module F2-4AD2DA Base Module D2-04BDC1-1 12 - 24 V DC 25 W used, tested ! Dimensions: 205 x 90 x 100 mm

Floor scale with industrial PC, hand-held scanner and hydraulic lifting device SARTORIUS Midrics 2 MW2P4-1500II-L 26602055 Load capacity: 1500 kg readability: 0,0,1 kg Weighing surface: 800 x 800 x 370 mm Industrial PC: 5AP920.1505-K80 Automation Panel 900 Screen diagonal: 15 used, checked ! Dimensions: 1500 x 1300 x 2500 mm

Belt Conveyor, Belt Conveyor, Conveyor Belt, Belt Conveyor RNA, RHEIN-NADEL AUTOMATION GmbH Type: FP 120 Load: max. 10 kg/m Belt length: 1050 mm Belt width: 50 mm Conveyor width: 50 mm diameter drive roller: Ø 50 mm Gearbox: RGM, RUHRGETRIEBE KG TYPE 3F i: 15 gear ratio Chain transmission: 1 : 1,1,27 Engine: RGM, RUHRGETRIEBE KG AF63/4B-7 0,18 kW 1380 rpm 230 / 400 V 3AC 50 Hz IP54 used, tested ! Dimensions: 2000 x 550 x 660 mm

Chip Conveyor, Hinged Plate Conveyor- Chip Conveyor AMK AUTOMATION Type 1100 x 430 Inlet: 1100 x 430 mm Free belt width: 360 mm Height inlet: 230 mm Height discharge: 1250 mm drive motor: 0,0,25 kW 230 / 400 V 3AC coolant pump: SCHMALENBERGER SM 32-13/2 Q: 12 m3/h P: 1,08 bar Pump motor: ATB AF 90L/2M-12L+E2 2,2 kW 2840 rpm 230 / 400 V 3AC used, tested ! Dimensions ( with pallet ): 4000 x 1300 x 2100 mm

Shade bracket, 9 pieces B & R - AUTOMATION X20 X20AC0SF7.0010 Length: 66 mm Width: 48 mm Height: 40 mm Material: Galvanized steel New ! Dimensions ( packaging ): 140 x 70 x 55 mm

Garvens Automation continuous weighing scale 1600-1150-950 RA1975 The automatic checkweigher including conveyor belt and SEW gear motor is designed for products up to a maximum of 60 kg. Manufacturer: Garvens Automation Type: SL 100 ID1 Year of construction: 1996 Machine type: automatic checkweigher Total size: approx. 1600 x 1150 x 550 mm (WxDxH) Electrical connection (Plug and Play) Nominal voltage: 380V and 220V Nominal frequency: 50Hz / 60Hz (+/-2 %) Weighing technology: Dimensions scale: approx. 600 x 750 x 1500 mm (WxDxH without conveyor belt) Type of measurement: electromagnetic force compensation Weighing range: 0 - 60000 g Conveyor belt 1600-1150-950 and SEW gear motor with frequency converter Conveying length (FL): 1600 mm effective width (NUB): 1150 mm belt width (GB): 950 mm Motor Type: SEW Gearmotor with frequency converter Motor Power: kW 0.55/0.55 Speed: 0,02-1,2 m/s Feat ...

Solenoid valve flow meter KROHNE DK800/N PED/G1/3.3/SEP 10 bar 100 °C Material: Stainless steel Solenoid valve: END-AUTOMATION series: MGAG2D MGAG2D132243450 0 - 3 bar G1/4 24 V DC used, tested ! Dimensions: 180 x 125 x 170 mm

Year of manufacture 2016 With over 40 years of experience, Polymac supplies extraction systems, in-mould labelling systems, handle machines and downstream automation for your pail and lid production. Extraction robot for large pails 10 - 20 litres

Control valve FAS, FLUID AUTOMATION SYSTEMS 108-PC-30000-S01 A. No.: 084131 M56105033 Operating voltage: 24 V DC 10 Watt used, tested ! Dimensions: 145 x 135 x 70 mm

Fixed side at the left Feedspeed 18 - 25 m/min Working width min 60mm for panel thickness 22mm, 105mm for panel thickness 40mm Panel overhang 30mm Panel thickness 8 - 60 mm in stead of 12 - 40 mm (with limitations) Coil edge thickness: 0,3 - 3 mm, strips 0,4 - 20 mm Coil diameter 830 mm Equipment: Sprayers release agent Squaring device with 2 motors each 3 kW Edge heating Edge magazine for 2 coils, guillotine for edges up to 3 mm Glueing part A20 with quickmelt application Lateral pressure zone K, 1 driven and 6 after pressing rollers End trims HL84, 2 motors each 0,8kW Rough trimming, 2 motors 1,5kW Contour trimming, 2 exchange units Profile scraping PN10 Flat scrapers FA11 Sprayers cleaning agent Buffing Automation package straight/chamfer: -Automatic adjustment infeed fence -Automatic setting of pressure rollers -Pneumatic setting of end trims -Pneumatic setting of rough trims -Automa ...

pressure: 130 t chamfer lenght: 3150 mm distance between columns: 2600 mm engine output: 15 kW control: CYBELEC VisiTouch weight of the machine ca.: 10900 kg dimensions of the machine ca.: 3990x1750x2900 mm Domestic equipments: - DELEM DA66T - 2D CNC control with LCD color display for control of 7 axes: Y1 = 1 ° cylinder Y2 = 2 ° cylinder X1 = horizontal movement of the backgauge X3 = horizontal movement of the stop finger / inclination R = vertical movement of the backgauge Z1-Z2 = lateral movement of the stop fingers - Top Dead Center - Speed changeover point - bending end - Deactivation point of the safety light barrier - Retreat stop - CNC controlled proportional pressure control - conical bending - USB port - DFC stator suspension compensation - Motorized back gauge model AS with 5 controlled axes - X-axis: 1000 mm stroke, X3-axis: 200 mm stroke - R-axis: 250 mm stroke - Hydraulic ...

Ref. -No.: 10372 Manufacturer: STAMA Year of construction: 2021 Type of control: CNC Control: SINUMERIK Siemens 840 D sl Storage location: Halberstadt Country of origin: Switzerland Turning Speeds: 4200 RPM X-axis travel: 615 mm Y-axis travel: 290 mm Z-axis travel: 500 mm Number of tools in the chain magazine: 64 Max. Rapid traverse: 65 m / min Max. Feed force: 4000 N Acceleration (X): 7 m/s² Acceleration (Y): 9 m/s² Acceleration (Z): 13 m/s² Further information: - Ball screw - Automation - Workpiece loading/unloading chuck parts with X- / Z- gantry loader - Clamping pressure preselection 15 - 50 bar for both spindles - Buffer station for constant short chip-to-chip times - NCU High Performance NCU 730.3.m - Magnetic gripper

CURSAL automatic unloader, for fast miter saws with Working direction from right to left, consisting of: - motorized roller conveyor, useful length 2 mt, roller width 320mm - 4 motorized catenaries for translation of pieces cut at 90° - 3 support supports pieces, for storage on lifting table - BOLZONI lifting table 1500x800mm, capacity 1000 kg, pneumatic lifting, table height closed about 130mm - touch-screen control for line automation, on separate panel - perimeter protections with light curtains - overall dimensions about 2.5 x 4 meters Machine to CE standards, in excellent condition

Bütfering Optimat SCO 113 - Diamond + LACK CONSTANT TABLE MACHINE / autom. Head delivery Stable frame construction with a constant workpiece inrun height of 900 mm by adjusting the upper part of the machine. Workpiece thickness settings from 3 - 160 mm 1. Aggregate comb. Steel contact roller and electronically controlled segment sanding pad unit CPS II system with variable grinding pressure 2. Aggregate Cleaning - Brush Unit Stable vacuum table for a large surface Large transport securing by means of suction clamping device - high-performance blower with control flap integrated in the machine. Table segmentation that can be activated via the terminal Extendable workpiece support Working width 1350 mm additional table in the outlet - foldable Feed speed infinitely variable 2.5 - 13 m/min. LACQUER SANDING PACKAGE: Vacuum table with lacquered carpet and vacuum generator 3 kW I ...

HB SS A75 Gen III (52 & 74 - SOFTWARE LICENSE FOR BOTH FORMATS) Ser No.: PJ0001726 Plate format (mm): from 240 x 240 mm up to 670 x 760 mm Plate thickness (mm): 0.15 - 0.30 mm Resolution: 2400 dpi or 2540 dpi1 Material counter: 88182.25 m2 Plate counter: 208806 pcs Exposure counter: 208598 pcs Total material used: 97354.27 m2 Total of all plates: 230309 pcs Total of all exposures 230133 pcs Equipment / Additional information: with integrated plate punch with washout station Glunz & Jensen washout station 85 HDX Plate stacker, advand PST 48 Prinect MetaShooter Automation DTL Dual Top Loader Suction device The machine has 1 laser head with 64 diodes Disassembly, packaging of the machine and securing (insurance of the machine during transport) were carried out by the manufacturer / Heidelberg. Condition: very good condition / total serviced

Width 56 cm Year of construction 2004 Round Pile Feeder RFH Extended loading table 4 fold pockets in the parallel break section Window rebate pocket pneumatic Control unit ACC 2.4 Automation Kit II Automatic Fold Pocket Adjustment Automatic folding roller adjustment downstream knife shaft Shed delivery SKP with pressing station Delivery date: immediately Price on request. We deliver and install worldwide!

Manz Automation aico.panel 80036808 Touch-Panel 19" aico.box.IPC V2 81009594 Set Item Condition: New as pictured Possible traces of storage, installed but not put into operation. Type: aico.panel Art-No.: 80036808 24VDC/2A Type: aico.box.IPC V2 Art-No.:81009594 REV: 2.1; 100-240 VAC / 4-2A; 50/60Hz Incl. accessories 30kg More items - new and used - can be found in our shop! International shipping costs on request!

Very powerful CNC plasma cutting machine Pierce a.s., Czech Republic Manufacturer: Pierce Control Automation a.s. Model: RUM 3000P HD Year of construction: 2014 Condition of the machine: very good Technical Specifications Work table length: 12,000 mm (can be shortened if required) Work table width: 2,500 mm Total cutting capacity: 200 kW Portal width: 3,000 mm Table size: 2000 x 2500 x 630 mm (6 pieces) Max. cutting range: Burrless: 0–32 mm Production die-cutter: 38 mm Maximum cutting capacity: 64 mm Accessories: Documentation Lantek Programming Software Plasma Source: Hypertherm HPR 260HD Internal suction filtration 5500m2/h - NEW unused The machine has undergone a full inspection and maintenance, including testing, by the manufacturer Pierce. We have logs available! Service and spare parts are hassle-free, Czech manufacturer! The machine is no ...

Vertical machining center VF 4 SS Manufacturer: Haas Automation Year: 2019 Control Haas Clamping table surface ... 1321x457mm Axis X ... 1270mm Axis Y ... 508mm Axis Z ... 635mm Spindle speed ... 1-12000/min. controlled axes ... 3 cooling... 20bar ISO 40. Magazine places... 30+1 Machine weight ... 6000kg L x W x H ... 3886x2400x3175mm Max. table load ... 1588kg The machine is in good condition, possible to test under electricity.

Overview The brewhouse, including fermentation and storage tanks and a KEG washer, was built in 2013 by the Austrian manufacturer Flecks. The whole equipment is in a very good condition and can be visited. Equipment Mash and brew kettle incl. whirlpool function, agitator, stainless: 1.000 L net Lauter tun, stainless: 1000 L net Calandria system (outdoor cooker), electrical heating, stainless. Integration of existing gas, heating + electrical: 72 kW Vapour-condensation system Whirlpool- system Mash and wort pump: 2,2 kW Hot water tank with electrical heating, stainless: 1000 L, 9 kW Wortcooler GEA 2-stages pT 100, electron. Thermometers Incl. all pipes, fittings, valves in stainless. Full automation upgrade: electrical switch board for full automatic process control switches, fuses: 100 kW Main connection 400 V Emergency switch PC-databus and modem Visualisations and automation software  ...

Blister packaging line, consisting of: Thermoforming blister machine Mediseal CP 400 and folding box cartoning machine Mediseal P 3000, incl. new PLC, operator terminal (HMI) and servocontroller: Thermoforming blister machine CP 400: • Set up for PVC/ALU film (conversion to ALU/ALU possible at extra cost) • Output thermoforming station max. 50-60 cycles/min depending on blister format • Output punching station max. 400 blisters/min depending on blister format • Foil width max. 160 mm • Roll diam. max. 500 mm, core diam. 70-76 mm • 2 roll holders for thermoforming film with film spreader and gluing device for roll change during operation • Pull-off length in thermoforming range 140-220 mm • Drawing depth PVC max. 12 mm • Drawing depth ALU max. 9.5 mm • Feeding: directional tablet feed with spiral conveyor and alternatively brush box (without format parts) ...

• Sorting insert diam. 650 mm made of stainless steel • Frequency control unit • Adjusted for cap diam. 28 x h 12 mm • Plastic housing • Height adjustable • Electr. connection 230V/50Hz

Key data: 750 mm, 600 mm, 520 mm

5-Axis Vertical Machining Center DMG DMU 70 eVo linear NEW DESIGN Year of construction 2010 Heidenhain MillPlus IT CNC 2-axis NC swivel rotary table : Axis of rotation: C-axis 360° x 0.001° Swivel axis: B-axis 102° x 0.001° Table size: Ø 700 x 500 mm Table load: max. 350 kg Longitudinal travel: X 750 mm Transverse travel: Y 600 mm Vertical travel: Z 520 mm Feeds up to: X 80,000 mm/min. Y/Z 50,000 mm/min. Rapid traverses up to: X 80,000 mm/min. Y/Z 50,000 mm/min. B/C 40 rpm. Spindle: Spindle drive power: 35/25 kW Spindle speeds: 20 - 18,000 rpm. Tool magazine positions: 120-fold Tool holder: HSK-A63 Tool diameter with/without adjacent tools: 80/130 mm Tool length: max. 300 mm Tool weight: max. 6 kg Machine weight: approx. 8,500 kg Machine height: L/W/H 6,000 x 5,200 x 2,900 mm Accessories: Full fairing. Production package. IKZ 40 bar, 2 ...