fori automation used for sale

We have for sale a collection of NEW Siemens electronic parts. Se enclosed list. Please give us an offer.

SMH automation devices with servo motors Type of control: Siemens Simatic 7 completely overhauled with 1 year guarantee

5PC910,SX05-00

Amada C3000 with automation Machine is in good condition year 2001

Robot Star Gxe 1000, In Perfect State, With All The Maintenance Done On Time. Stroke (Mm):1000 (Vertical),650 (Crosswide),2000 (Traverse) Max Load (5 Kg) Imm Range - 80/350 Ton

Automation SheetMaster ? Standard configuration ? Suction frame 3000 x 1500 mm ? Peeler cup ? Vacuum sensor ? Central lubrication ? Sheet thickness sensor for double sheet check ? Control TASC 100 ? Clamp closing automatically ? Peeling system ? Suction plate module GripMaster 3000 x 1500 mm ? GripMaster Standard / 1600 ? With the following configuration: ? GripMaster Standard ? Scissor table 400 mm ? Sheet skeleton grippers with sensor ? Scrap skeleton pallet tiltable, 3000 x 1500 mm ? SortMaster Box ? TooMaster with 40 stations ? Store interface ? Safety devices for connection to storage system incl. 1st light barrier circuit

Loading unit: LMZ 3050 suitable for: L3030 and L3050 Max. sheet size, load/unload: 3000 x 1500 mm Max. sheet thickness, unload: 20 mm Cycle time: 230 sec

Loading device LoadMaster including loading station with fanning magnets Loading Sheet size: 3000 mm x 1500 mm Min. sheet size : 1000 mm x 1000 mm Max. sheet thickness: 25 mm Max. sheet weight: 900 kg

Standard configuration Basic system incl. peeling device and measuring device for sheet thickness Max. sheet weight 900 kg Loading Max. sheet size 3000 x 1500 mm Min. sheet size 1000 x 1000 mm Max. sheet thickness 25 mm Unloading Min. part size 150 x 150 mm Max. sheet thickness 20 mm ? Installation symmetrical ? WITHOUT loading station

Automation LiftMaster Compact Loading max. sheet format 3000 x 1500 mm min. sheet format 1000 x 1000 mm max. sheet thickness 25 mm max. sheet weight 900 kg Unloading min. parts size 150 x 150 mm max. sheet thickness 25 mm max. sheet weight 900 kg Basic system incl. synchronous loader, peeling device, measuring device for thick sheets, movable unloading rake, incl. loading / unpacking station Basic configuration: ? synchronous loader ? peeling device ? measuring device for thick sheets ? movable unloading rake ? raw material unpacking station ? maximal stack height on loading side is 90 mm ? maximal stack height on unloading side is 250 mm LiftMaster Compact options ? Additional pallet for finished parts ? Separation of thin sheets (s=1-2 mm) ? Scraper for slats (cleaning brush) ? Storage interface

AUTOMATION FOR THE PLASTIC BUCKET INDUSTRY Year of manufacture 2016 Up to 1800 buckets per hour Performance data Shapes: round, oval, square Stacking height: 1200 mm Article sizes: 1 l - 12 l or 10 l - 30 l Quick-change device Servo control with 4 axes SPS with recipe management Optical registering conveyor belt

PLC control, expansion module, interface module, interface module, AS-Interface actuator module, AS-Interface sensor module, connection, electronic modules, electronic block, power module, function module, central module -Manufacturer: Siemens, Simatic S5 automation device S5-100U with memory module -Type: 6ES5 100-8MA02 6ES5 375-OLC11 -Dimensions: 130/90/H135 mm -Weight: 0.7 kg

PLC control, expansion module, interface module, interface module, AS-Interface actuator module, AS-Interface sensor module, connection, electronic modules, electronic block, power module, function module, central module -Manufacturer: Siemens, Simatic S5 automation device S5-100U orig -Type: 6ES5 100-8MA02 -Number: 1x module available -Price per piece -Dimensions box: 140/130/H00 mm -Weight: 0.7 kg/pc.

Different types of TEM control system units, (VME32AI, A-IN 32-1, I/O 32-1, SERV 24/3-1, STEP 24/2-1, CM16DI, CM16DO, CM2AI, CMPS) Different types of DiaNe XT control system units, (Displays, CPU-s, I/O cards, etc) Engine control module for CAT gas Engines (CAT3516B) CAT ECM 348-2392-01 Different types of W ecs cards: (Analog input/output, digital input/output, power supplies, C-control units, D-control units, SM units, KD units, etc.) We have a lot more just contact us.

Technical specifications: Sheet size: 3000 x 1500 mm Cutting area X x Y x Z: 3048 x 1524 x 70 mm Max. Positioning speed axially parallel x, y: 100 m / min Max. Simultaneous positioning speed: 140 m / min Position deviation: +/- 0.1 mm Position spread: +/- 0.05 mm Max. Workpiece weight: 890 kg Machine weight: 13,000 kg Operation via panel: ByVision touchscreen operation and manual control unit Electrical consumption of the entire system: 26 kW Laser source: Type: Fiber 4000 Power: 4,000 watts Control range: 400 - 4000 watts Max. Sheet thickness: Steel 20 mm Stainless steel 15 mm Aluminum 15 mm Brass 8 mm Copper 8 mm Dimensions: Length: 11,000 mm Width: 6,050 mm Height: 2,565 mm

Approx. Onsite Dimension. (l x w x h): 13,000 x 2,500 x 2,000 mm, weight approx.: 0 kg

For sale are 2 Asymtec Automation 402 for PCB assembly The price is per unit Travel range approx. 300mm in the cross movement

Automatic Plasma Cutting Length 3000 X 1500 Width 6 Mm Iron Drilling Capacity

This Halter Automation Load Assistant S-180-20 Robot was manufactured in the year 2018. The machine has a minimum workpiece of 40 mm x 40 mm.

USED in working order HMI for Husky PET and conventional injection molding machines All Husky models manufactured between 1998 and 2005 Brand Xycom Automation Model 9960 Part number 726619 Voltage 100-250v Frequency 50 and 60Hz Made in USA

 Continuous bearing Seam BITO 5 levels per shelving system Continuous shelf BITO Manufacturer BITO Regaltechnik Continuous shelves of different designs improve your intralogistics: FIFO principle: First In - First Out. The goods are removed in the order of put-away. In the area of perishable items such as pharmaceutical products or food essential. You can store large quantities in large shelves of great depth. This increases the utilization per sqm of storage space. You can stock many different items. Small quantities can be picked on the picking side. Loading side and picking side are separated. All processes are therefore fluid. The throughpass speed increases. The risk of accidents is reduced. In addition, you can receive packing tables and roller conveyors from us, which bring and remove the goods on both sides of the shelf. You can also receive an indi ...

Delivery options used mining technology: Offers Mining machinery and plants Abrasion-resistant materials Cables, hoses and pipes Chains and wire ropes Chemicals and reagents Communications Systems and Equipment Continuous miner and cutting device Control and Automation Systems Conveyors, components and accessories Crushers, crushers and grinding plants Dredging and Dredge Equipment Drilling and blasting Electrical appliances, batteries and lighting Engines, electric and diesel Environmental and Emissions Control Manufacture and processing Flotation, agglomeration and filtering Seals and closures Health and safety service and equipment Heating, ventilation and air conditioning Hydraulics and electromechanical equipment Loader, truck and forwarding agent Mining locomotives Mining Wagons Heavy opencast mine Rail & Systems Noise,  ...

? The machine is built in 2 construction works: 1250 x 2500 and 1500 x 3000. ? The IPG fiber laser resonator is available for this model with the power values 500 W, 1000 W, 1500 W and 2000 W. ? The beam is guided by a flexible light guide, i.e. cleaning and alignment of the mirror optics are not required. ? The HP SSL high-performance cutting head is very easy to set up. ? High cutting efficiency with low operating costs; Power consumption of only 13 kW for a 1-kW fiber laser source. ? The heavy machine frame and the high-stiff bruecke are designed as a tension-free welded construction and carefully manufactured. ? The interchangeable table with hydraulic lifting adaptation takes over the loading and removal of cut parts during the ongoing cutting process - re-training with further automation functions is possible. ? The working area is fully clad and illuminated, and the cutting ...

Pierce Control Automation RUR 2500 P working range: 2.1 m x 6.1 m control: Burny 10 LCD Completely welded portal construction without screwed connections o linear guide in the transverse axis o AC servomotors (12 000 mm/min.) o Digital synchronization on the laeng axis o CNC control system BURNY 10 LCD Plus with touch screen o membrane keyboard o flyingmounted cutting buttons o Automatic initial adjustment of the plasma torch o voltage monitoring of the plasma torch height o 1 torch parking lot outside the cutting area o circuit breaker at the end of all axes 1 x Plasma Kjellberg 160i with manual gas console cutting up to 25mm qualifying cut Optional autogencan Completely factory-assembled machine assembly and commissioning ready for use

The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HPR260XD plasma system is suitable for use in sheet thicknesses up to 64 mm. The system delivers a high-quality cutting quality, high productivity and reliance with low operating costs. Equipment: ? CNC control system Pierce-19 with 19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HPR260XD for cutting structural steel up to a material thickness of 64 mm, hole piercing up to 38 mm, beard-free cut up to 32 mm, manual gas console ? Two three-burner autogenschraegschneidkoepfe with electrical finishing and burner attachment control for  ...

The CNC-controlled autogen/plasma cutting machine RUR 2500GP is a completely welded portal construction sizing without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 280i plasma system is suitable for use in the sheet thickness range of 0.5 - 50 (70) mm. As a soft switch inverter, HiFocus 280i offers a fully electronic power source for the power range up to 280 A. The system provides the best cutting results in the field of laser-like cuts and offers a higher service life of the wear parts. Equipment: ? CNC control system Pierce-19 touchscreen ? Energy chains with cables and loops ? A motorized plasma torch with automatic initial setting and burner ? Pneumatic anti-collision system ? Plasma cutting unit HiFocus 280i for cutting structural steel with recommended material thickness of 0.5 - 50 mm, punching up  ...

Almost unused used CNC rotary axis from ISEL Automation ! By exception, a competitor's product. From a payment of a complete CNC fraes machine from ISEL due to the switch to a T-Rex CNC Fraes machine from CNC-STEP Top exact product, solid, stable processing. A few years old but top in shot. 100mm Holder for chuck 23mm Throughlet Height 320mm Width: 21 0mm Stabile cast aluminum discharge 4 Screw fasteners on the foot step motor 6.0 Ampere ! Controltable up to 48 volts Please also note our other CNC machines offers;

; ready to use

; now ready

The CNC-controlled plasma cutting machine RUR 2500P is a completely welded portal construction without screwed connections with linear guides in the transverse axis and digital synchronization in the laeng axis. The HiFocus 161 i plasma system from Kjellberg with Contour Cut is suitable for use in the sheet thickness range of 0.5 - 40 (50) mm. As a soft switch inverter, HiFocus 161 i offers a fully electronic power source for the power range up to 160 A. The system is the multi-talent of plasma cutting technology for marking and cutting construction blades, alloyed steels, aluminium and all electrically conductive materials. (see Pdf ) Equipment: ? CNC control system Pierce 19 with touchscreen ? A motorized torch with automatic initial setting and burner ? Plasma cutting unit HiFocus 161 i for cutting structural steel with recommended material thickness of 0.5 - 38 mm, hole bars up  ...

NANO FILTRATION PLANTS CAPACITY: FROM 5.000 LITER TO 50.000 LITER PER HOUR USED FOR WHEY DEMNINERALIZATION AND PRE CONCENTRATION TO 20 % SOLID RATIO FULLY AUTOMATION CONTROLLED WITH PLC CONTROL PANEL AND TOUCHSCREEN

REVERS OSMOSIS APPLICATIONS: MILK CONCENTRATION, WHEY CONCENTRATION, WASTE WATER CONCENTRATION STRAINED YOGURT, QUARK, CAPACITIY: FROM 5.000 LT TO 50.000 LT PER HOUR FULLY AUTOMATION CONTROLLED WITH PLC AND TOUCH SCREE PANEL TURN KEY PROJECTS

Pierce control automation RUR 2500 P Work area: 2.1 m x 6.1 m Control: Burny 10 LCD Fully welded Portal construction without bolted connections o LM Guide in the transverse axis o AC servo-motors (12 000 mm / min.) o Digital synchronization on the longitudinal axis o CNC control system BURNY 10 LCD Plus with touch screen o Membrane keyboard o 'Flying' bearing inserts o Automatic initial setting of the plasma torch o Voltage monitoring of plasma torch height o 1 burner parking outside the cutting area o Circuit breaker at the end of all axes 1 x plasma Kjellberg 160i with manual gas console Cut quality cutting up to 25 mm Optional autogen retrofittable Completely Factory reconditioned machine Installation and commissioning on request

ULTRAFILTRATION PLANT CAPACITY: FROM 5.000 LITER TO 30.000 LITER PER HOUR USED FOR PROTEIN CONCENTRATION APPLICATIONS: UF CHEESE, FETA CHEESE, MILK PROTEIN CONCENTRATE, WHEY PROTEIN CONCENTRATE FULLY AUTOMATION CONTROLLED WITH PLC CONTROL PANEL AND TOUCHSCREEN

Work area: 1.5 x 3 m or 2 x 4 m Standard equipment: self-focusing cutter 2 kW laser cooling unit, astringent and purifying air system, security, automatic twin transfer table, CAD/CAM software (Metalix, Lantek, Almacam) control unit with 15 "-touch screen, conveyor belt, warning light, nozzle set All CAD/CAM programs such as Lantek, Metalix and Almacam are usable. Options: Linear drive technology, laser light source optionally available with 3, 4 or 6 KW Sampling device, safety light barrier, air conditioning for automation Panel. 24 months warranty The price refers to a 1.5 x 3 m facility with 2 KW

AC Automation LC800 semi-automatic L-sealer and shrink tunnel, belt width approx. 350mm, tunnel entrance approx. 350 x 180mm, sealing bar approx 500 x 400mm (L x W). Floorspace 2600 x 1000mm x 1400mm H

Sander Press Feed Type 260/40 Technical Data: 1. Feed (infinitely adjustable) 60 - 260 mm feed angle 118 degrees 2. Gripping distance per rail 40 mm gripping angle 58 degrees 3. Gripping railprof11 (T-nut pro1? 80 x 25 mm 4. Gripping rail position closed 305/350/395/440 mm 5. Gripping rail ingestion flat guide 6. Gripping rail slurl 2687 mm 7. Gripping rails 1323 mm 8. Gripping bracket width 73 mm 9. Position of the connection shaft basic geraet - outlet rim I 121 x 260mm outlet gable I - spout scope II 121 x 600mm 10. Diameter of the connecting shaft 11. Transport air above the press table 12. Drive by press (joint shaft) 13. Adjusted air pressure of the locking cylinders gripping 3.0bar 14th weight 1100 kg

The SteriWasher is an innovative new robust, high-performance, validateable part washing system designed for use in pharmaceuticals, biotechnology, food, beverages, healthcare and other critical areas. The washroom is accessible via a robust wing door and is made of 316 stainless steel. It is hygienically constructed. By using a combination of specially developed spraying technologies with variable performance, the washing machine offers energy-rich washing along with an energy-saving rinse, which is selected by a simple recipe selection. Description The SteriWasher ™ parts washers use existing and new technologies to provide an environmentally friendly washing system with low water and energy consumption in production and research environments for equipment ranging from critical small parts and tools to large mixers, barrels and containers. The range is available with a range of c ...

Working range: 1.5 x 3m, or 2 x 4m Standard equipment: self-focusing cutting head 2kW laser, cooling unit, cleaning and drying air system,safety cabinet, automatic twin transfer table,CAD/CAM software (Lantek, Metalix, Almacam)Control device with 15 touchscreen,foerderband,warning light,duesenset Options: linear drive technology, laser light source optional with 3, 4 or 6 KW removal device, safety light barrier,air conditioning for automation panel. 24 months manufacturer's warranty The price refers to a 1.5 x 3m system with 2 KW; ready for use

120 ton x 4100mm (3700mm between frames) MODEVA 10 CNC Complete with STARMATIC ROBOT AUTOMATION TOOLING PACKAGE SOFETWARE PACKAGE

ULTRAFILTRATION PLANT CAPACITY: FROM 1.000 LITER TO 50.000 LITER PER HOUR PROTEIN CONCENTRATION APPLICATIONS: UF CHEESE, FETA CHEESE, LABNE CHEESE, FRESH CHEESE, CREAM CHEESE, MILK PROTEIN CONCENTRATE, WHEY PROTEIN CONCENTRATE ...ETC PRODUCTIONS FULLY AUTOMATION CONTROLLED WITH HMI

This machine can be considered as an ultimate solution for the production of concrete elements providing the one to choose numerous options as an additional upgrade to the machine that can make production even more efficient: Filling box on servo drives Filling boxes both from the coarse mix and face mix powered with 2 servo motors create fast movement back and forth contributing reliable filling of the mould. As for the coarse mix device filling box it is additionally equipped with an agitator (driven by the hydraulic cylinder) for equal and fast filling. Servo vibration Hi-dynamic Servo vibration system transmits power for the high compaction with the just right consumption of electrical power to vibration table consisted of impact and ledge bars and thus providing top-quality paving stones, blocks, curbstones as well as any other products which modern demanding market requires ...

USED -Year of construction: 2019 -Operating hours: 1,110 -Very good condition - was only in use from November 2019 - June 2020. The Butler MiR is a user-friendly, efficient, mobile robot for the automation of internal transport and logistics solutions. It optimizes the work processes, releases employee resources and enables an increase in productivity and thus a cost reduction. The Butler MiR is one of the new, highly developed mobile robots that quickly generate income from the investment. Often the payback period is only one year. The robot's technology allows automatic scanning of the driving area and environments, as well as importing 3D drawings of the buildings. In addition, the built-in optical sensors and scanners enable collaborative operation, i.e. the robot can drive freely in dynamic environments with humans and other moving obstacles, as it automatical ...

Orange juicer CITROCASA 8000 SB-ATS Advance The 8000 SB ATS (Automatic Transport System) sets completely new standards in terms of ease of use and automation. The ideal solution in the highly frequented self-service area. The automatic transport system keeps the juice zone free of any peels, kernel or pulp residues Start of the pressing process by pressing the tap High capacity of the fruit storage basket (21 kg) Stainless steel design of all important components Digital counter of the total pressed oranges purest orange juice through sCs up & down cutting system Easy cleaning thanks to Double Cover and Cross Holder Machine stops automatically when the shell container is full Capacity: 40 oranges per minute Dimensions machine: H180 x W100 x D65 cm Dimensions storage trolley: H100 x W52 x D53 cm Machine & wagon can be driven on deflection ro ...

NANO FILTRATION PLANTS CAPACITY: FROM 1.000 LITER TO 50.000 LITER PER HOUR USED FOR WHEY DEMNINERALIZATION AND CONCENTRATION, PERMEATE CONCENTRATION, FERMENTATION BROTH CONCENTRATION AND MANY APPLICATIONS FULLY AUTOMATION CONTROLLED WITH HMI TOUCH SCREEN OPEREATOR PANEL

Laser cutting machine BYSTRONIC BYSPRINT FIBER 3015 built in 2014. The machine is equipped with ByLoader for loading sheet metal. Technical specifications : - laser type: FiberLaser - power: 3 kW - activation time: 38752 h - cutting time: 19591 h - automation: ByLoader 3015 - automatic sheet loading - adjustment range: 300-3000 W - wavelength: 1060-1080 nm - nominal size of sheet X, Y, Z: 3000 x 1500 x 70 mm - maximum workpiece weight: 750 kg - table change time: approx. 35 s. - positioning deviation: + - 0.1 mm - positioning spread: + - 0.05 mm - edge detection accuracy, capacitive detection: + - 0.50 mm - accuracy of edge detection with CutControl: + - 0.15 mm - accuracy of optical edge detection using Detection Eye: + - 0.15 mm - maximum parallel positioning speed X, Y, Z axes: 100 mm / min. - maximum simultaneous positioning speed of the X, Y, Z axes: 140 mm / min ...

Qty. 1 Second-hand cold rolling mill Mfc.: MCC, ABB, IMS Type: 6-Hi Cold Rolling Mill Built: 2009 Stopped: 2017 Annual capacity: 220,000 Ton/Year Annual running time (Hour): 6480 Strip Width: 800~1250 mm Thickness Entry: 1.5~3.5 mm Exit: 0.2 – 1.2 mm De-Coiler OD: 1000~2000 mm De-Coil ID: 610 mm De-Coil Weight: Max. 25 T Coil OD: 1000~2000 mm Coil ID: 610 mm Coil Weight: Max. 25 T Mill Max Speed: 1300 m/min Threading Speed: 30 m/min Main Drive Controller (3300 VAC) Mfc.: ABB ACS6000 Variable Speed Variable Voltage Xray Gauge Mfc.: IMS Germany Automation Siemens PLC/Wincc