forging roll used for sale

Type: KS-SW-2-50-R-2-400-SPT-1400-12, consisting of, 1x Sander” winder type AFW-1-1400-1200-12-B with BSTgroup” digitial controller (2022), edge cutting system, 1x Sander” winder ABW-1-1400-1200-12-B with Siemens” touchpanel BSTgroup digital controller (2022), 2-door switch cabinet HSS-sara, used floor space approximately 7.500x2200mm, total weight approximately 5000kg Auction-ID: A1-43459-13

Type Selen-Y Electric, consisting of, 24x infrared heater module, 1x transverse bridge with double printing head, 1x transver bridge with 1 printing head, 1x winder Sander” AFW-1-1400-1200-12B (2022), 1x winder Sander” ABW-1-1400-1200-12-B with Siemens” touchpanel (2022), 2x Basler” machine vision camera with led lightning, 1-door switch cabinet with monitor (camera control unit), 1-door switch cabinet JAC de Vries” R324 (2022), 1-door switch cabinet Rimas” Pamela 1400 (2023), 2-door switch cabinet Sander” HSS-Pamela (2022) used floor space approximately 19.000x3000mm Auction-ID: A1-43459-11

Type LAMB 1400, 2-layer, laminating pressure 4-6N/cm, laminating temperature 30-80°C, coating weight 3-5g/m2, production speed 1m/min, consisting of, 3x winder, 1x \"TSK LIA\"-brushing unit (2023) s/n 1311, horizontal wet proces cleaning unit, 3x IBC for demineralised water, 1x water treatment unit, overhead travelling crane with abus electrical chain hoist capacity 2000Kg, 1x \"Technotrans\" heating / cooling unit type teco tt 140.27.058, nominal heating/cooling capacity 27/200kW (2022), 1- \"Technotrans\" heating / cooling unit type teco wtd 150.09.25 nominal heating/cooling capacity 9/600kW (2022) 1x air-handeling cabinet, 1x 7-door switch cabinet. Used floor space approximately 13.000x7100mm Auction-ID: A1-43459-9

Type Reco 800, consisting of: roll unwinding system with portal crane and Abus” electric chain hoist capacity 1000kg, Kroenert” applicator unit, laminator unit, overhead ir heater, 3-zone drying tunnel, pulling station and rewinder, 3 Pfeiffer” vacuum pumps type HiScroll 12, Wiltec” glue mixing and dosing unit type 46.2Kgluemix VR, Technotrans” modular temperature control unit type teco wd 150, heating / cooling capacity 9/600kW, 1 pneumatic switch cabinet, 11-door electrical switch cabinet, used floor space 19.000x4200mm, total weight approximately 30.000kg Auction-ID: A1-43459-14

Type D350H.1, consisting of amongst others: retractable side panel, 7x Ebara” dry pump type AAS200/100/70WN, 1x Edwards” mechanical booster type EH 2600 IND, 5x Trumpf” RF generator type PFG5000RF, 2x type PFG1000RF and 1x type PFG1600RF, 1X Marx” transformer, 4x 2-door electrical switch cabinet, 3x i-chamber gas cabinet, 1x Single” temperature controller type STO 1-24-24-D2/ZGD (2010) and 2x type STO 1-6-12-D0/D2 (2010), combined piping and steel structure with platform and stair, used floor space approximately 9000x8500mm Auction-ID: A1-43459-4

Unused!, Consisting of: steel chamber hull with various fixtures like sensors, valves and piping, steel structure with platform and stairs 5x vacuum valve manifold cabinet, lot of steel structures (not mounted), casco dimensions approximate, 13.000x5000x4000mm, total used floor space approximately 12.000x20.000mm Auction-ID: A1-43459-5

Type PV-ODW 1462/80 operating height 0-80mm, operating speed max. 6 m/min., max. Press force 100kN, temperature max. 200°C, complete with: unwinder unit, Bürkle” glue top-bottom applicator type EKM, 2KM” glue metering mix module type PGM320, unwinder unit, Sander” roll winder type AFW-1-1400-1200-12-B (2021) with 2-door switch cabinet, 3x Bürkle” oil heater unit, central switch cabinet with Siemens” touchscreen panel and Siemens” simatic mobile panel,”Bürkle” 6-door switch cabinet and fixed crane portal with SWF” electric chain hoist capacity 1000kg. Used floor space approximately 20.000x6000mm, total weight approximately 62.000kg Auction-ID: A1-43459-7

Consisting of: Branson” welding unit type MWX100 built on transversal system with control module type VersaGraphix and spare welding unit MWX100, 2x Sander” winder types ABW + AFW-2-1400-1200-12-B with 1x Siemens” touchscreen panel, both equipped with cooling ventilation and enclosure, Sander” 2-door switch cabinet, used floor space approximately 7.800x3600mm, total weight approximately 5000kg Auction-ID: A1-43459-12

Type D1340, Roll-to-Roll top cel deposition line, consisting of amongst others: (ground floor) 11x Trumpf” RF generator TruPlasma RF series type 3000 G2 (2022), 5x Edwards” vacuüm - booster combination Drystar vacuümpump type GV250 -” type EH2600IND Booster 380 (2008), 2x Druschke” vacuüm - booster combination vacuümpump type A70561900 - Druschke” booster type A307-51-935, 4x Single” high temperature control unit type STO 1-9-42, coolingsystem with 2 x Grundfos” pump type DE7309BE, UV light, pressure vessel, Alfa laval” plate heat exchanger, 1x retractable side panel. On the first floor, consiting of: 7x water manifold, 10x 2-door electrical switch cabinet, 1x 1-door electrical switch cabinet, 2x Edwards” booster type EH4200 IND, various messuring equipment. On the second floor, consisting of: 1x pressure valve cabinet, 4x Single” high temperature control unit typ ...

Consisting of: 4-zones with 8 connected process modules : feeding, brush, blow-off, ultrasonic cleaning, blow-off/tensioning/blow-off, 4-step cascade rinsing, blow-off and drying module, 4x Becker” vacuüm pump type SV5.1050/1-01 enclosed in soundproof stainless steel cabinet (2009), 2x winder / unwinder unit equipped with Boschert” safety-chucks and enclosure, one side has built-in cooling fans, with 2-door electrical switch cabinet, stainless steel walking platforms with plastic grid floor and stair, 3-door electrical switch cabinet, used floor space approximately 18.500x6000 Auction-ID: A1-43459-19

Consisting of: 8 connected process modules : feeding, pre-rinse, blow-off, caustic bath, blow-off, flush bath with 4-step cascade rinser, acid, flush with 4-step cascade rinser, isolation and drying module, 2x Kampf” winder / unwinder unit with Boschert” safety chucks, 2-door electrical switch cabinet, 4x Becker” vacuüm pump type SV5.1050/1-01 enclosed in soundproof stainless steel cabinet (2008), powder dosing / mixing unit, 6-door electrical switch cabinet, stainless steel walking platforms with plastic grid floor and stair, used floor space approximately 17.500x6000mm Auction-ID: A1-43459-18

Consisting of: 14 connected process modules : feeding, blow-off, 3x lye bath, blow-off, 4-step cascade rinser, flush, acid, flushing, brush, flush, inspection, drying and output module, 2x winder / unwinder unit equipped with Boschert” safety-chucks and enclosure, one side has built-in cooling fans, 4x Becker” vacuüm pump type SV1100/1 enclosed in soundproof stainless steel cabinet (2022) 5-door electrical switch cabinet, walking platforms with stair, used floor space approximately 26.000x6000mm Auction-ID: A1-43459-17

Type: AHT 2150-ek-so, with 3 Annealing-drums, max. temperature 200°C, heated by electric tube radiators, capacity 84kW (24 x 3,5 kW) , flowrate 50.000m3/h, build in isolated housing, dimensions approximately 6800x4600x4000mm, 2-door switch cabinet with ”Siemens” touchpanel, 1x Sander” multi position winder type AFW-1-1400-1200-12-B (2023) equiped with 3 cooling fans, 1x Sander” guidance unit type ABZ-1400-1200-12 (2023), 1x Sander” (un)winder type ABW-1-1400-1200-12-B (2023) equiped with 3 cooling fans, 4-door switch cabinet, Used floor space approximately: 15.500x6000mm. Auction-ID: A1-43459-8

Consisting of: 1x BZT” 3-axes bridge milling machine type PFU-S 1020-G with Siemens” touchscreen panel and Vevor” industrial chiller type CW-5200, 1x Rösler” transversal blasting head with Rösler” dry blasting unit combined with Nederman” dust collector type MJC-MINI (2023), 1x brush-roller cleaning unit with Milltech” dust collector type HVU solo 18 performance, 2x Sander” winder type AFW-2-1400-1200-12-B 1x equipped with Siemens” touchscreen panel and 2-door switch cabinet, used floor space approximately 12.500x6200mm Auction-ID: A1-43459-10

Brands E.W. Menn / Ingramatic / P&E / Hilgeland Diameter ranges from 1 mm - 20 mm

Makes: Hilgeland / EW Menn / Ingramatic Diameter ranges 1mm - 20mm

Roller or belt conveyors shifting lengths approx. 25 m

Rolling milling machine Koepfer 153 A/CNC Manufacturer Jos. Koepfer & Söhne GmbH Type 153 A/CNC Built in 1988 Machine No. 153199 Technical data Largest Module 2 Distance workpiece tool axis max. 4- 87 mm max. workpiece diameter - without magazine 142 mm - with magazine 80 (100) mm max. milling length 150 mm max. length workpiece - without magazine 300 mm - with magazine 220 mm min. number of teeth 3 min. screw gait number 1 Main spindle through- 33 mm Hole Mounting hole for 50 mm Jig max. cutter diameter 70 mm max. cutter width - Universal milling head 63 mm - Shifting milling head 71 mm max. axial cutter shift - Universal milling head 40 mm - Shifting milling head 44 mm 35 Longitudinal feeds 0.1 -5.0 mm /WU 10 cutter speeds 210-1680 /min Control (2 axes) CNC Drive power 2.2 kW Weight approx. 2400 kg Available immediately Location  ...

Offer: electrically driven We will be happy to send you further information and other roller conveyors. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and error are expressly reserved.  ...

manual roll gap adjustment 2x7.5 kW motor Bearing Oil circulation lubrication adjustable roller speed 10-41 rpm BJ 1990

Technical data: Make: Moehringer Width: 1500 mm Length: 1000 mm Roll diameter: 108 mm - With stud rolls - Used to transport parquet friezes Pictures and further information on request

Price per meter; Offer: We will be happy to send you further information, pictures and similar products. All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. The material remains the property of the seller until full payment. intermediate sale, other use, Exploitation and error are expressly reserved. Yours sincer ...

Length: 4,700 mm Roll width: 800 mm Roll spacing: 650 mm Roll diameter: 168 mm Recesses: 4 Drive power: 2.2 kW 83 rpm. - mounted with ball bearing rollers on profilesteel frame - Drive by special gear motor - Praezisions roller chain - spring-loaded lashing compensation

Technical data: Make: Moehringer Width: 1600 mm Length: 6000 mm - with pneumatic belt repeller Pictures and further information on request

Timing belt+clamping roller DEUTZ BF4L1011 (=OE 02929933) Net= 67,- Timing belt+clamping roller DEUTZ BF4L2011 (=OE 02931480) Net= 151,- Timing belt F/BF3-4M1008 Net= 50,- Clamping roller F/BF3-4M1008 Net= 76,- all price plus Shipping+VAT info@miw-zeven.de

1 x David Bridge 15/18\ Dump Extruder with 40\ Face x 20\ die Roller Die. Spare parts available. Screw L/D 5:1, Crammer. Length of Barrel 7ft. Right angle turning unit for product flow. 200HP DC variable speed motor

Kobelco Twin Screw Roller Head Extruder (horizontal type), Model TSR-330 Roller die assembly (TSR-33H005H) 38in wide x 16in dia Roller die moves away from the extruder/mixer section via hydraulic ram. driven by 102kW DC variable speed motor through Hansen reduction gearbox (on flexible coupling so roller die can move forwards/back). Twin screw dump extruder 330mm screw dia driven by 90kW DC variable speed motor through Hanson reduction gearbox. In very good condition. Previously running underneath an F270 Banbury. Complete with all controls, manuals and documentation etc.

Collin Two Roll Lab Mill, Roll size: 150mm dia x 400mm wide Hydraulic nip adjustment, Model: WALZWERKE 150, Year of manufacture: 1988, Power: 19kW Electric roll heating with oil - operating temp 50 to 220 C Each roll variable speed from 0 -30 rpm Manual lubrication, programable controls. In very good condition. Manuals/drawings available.

Used roller doors for painting systems between the painting booth and the dryer Make : ITP, Wolf Width: 1 pc. approx. 6.1 m 1 pc. approx. 5.7 m 1 pc. approx. 2.6 m Height: approx. 2.6 m each Drive: electric, each approx. 0.5 kW Location : Nuremberg Warehouse Sell price: € 1,450,- for 5 to 6 meter long roller doors € 1,250,- for 2 to 4.99 meter long roller doors per net, from location We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

We can offer several thread rolling machines with cylindrical dies, any size.

1 x Farrel 9in dia x 18in wide Two Roll mill, Machine number 72M0563, Year: Mar 1972, Swing sided type, Roller bearings, variable speed motor roll (to give variable friction), Cored rolls with rotary joints fitted, Adjustable material guides. Complete with all guarding and controls etc and in very good condition.

REVAMPED: 1990, WIDTH: 700-1400 MM, THICKNESS: 100 MICRONS - EXIT: 2 x 5 MICRONS 1500 M/MIN.,

1 x Farrel 9in dia x 18in wide Two Roll mill, Machine number 72M0563, Swing sided type, Roller bearings, variable speed motor roll (to give variable friction), Cored rolls with rotary joints fitted, Adjustable material guides. Complete with all guarding and controls etc and in very good condition.

1 x Bridge 84in x 26in/22in dia two roll mill, manual nip adjustment, Cored rolls with rotary joints fitted, Bronze bush type sleeve bearings, with Hagglunds hydraulic drives fitted to each roll, 160kW motor with pump to each roll for variable roll speed/friction. Drives fitted in 1988 (Marathon type). Complete with controls etc and in good working condition. Fabricated bedplate.

a palette with 145 kg - 4 pieces new Schleifscheiben D=350mm, 2 pieces used Schleifscheiben with flange, 10x Abrichtrollen. a palette with 319 kg - 4 pieces Schleifscheiben D=400mm uses with flange and an Abrichtrolle.eine palette with 257 kg - 22 pieces Abrichtrollen with flange

<br><br><br>Still in operation: Yes<br>Available: immediately

3-roll hydraulic with dual pre-pinch planetary configuration. new to complete, 45 days from order. -Plate width 3000 mm -Capacity rolling plate thickness 50 mm -Pre-pinch plate thickness 40 mm Machine configuration and accessories installed: -useful surface length on the rolls 3100 mm -upper roll size 480 mm -lower rolls size 440 mm -Digital position readouts. -Hardening treatment of the 3 rolls. -3 rolls driven hydraulic motorized with independent axial gear box on each roll. -Conical plate bending attachment with tiltable lower rolls hydraulic. -CE quality certification, Made in Italy manufacturing. -Service manuals and operation instruction manuals. -Hydraulic diagrams -Electric & electronic schematics with parts list. -Set of service tools for maintenance. -Electric power installed 50Hp. -3 phase voltage to be specified Warranty 12 months.  ...

ZENO double roller vorader ZDV 2500x2000, mobile on chain suspension, with discharge conveyor and magnetic separator, drive power 298 kW, 1900 rpm, MTU diesel engine, rotor flight circuit 575 mm, 2 x 12 rotor tools on tool holders, new design demonstration machine. ZENO Twin rotor shredder ZDV 2500x2000, mobile on chain chassis, incl. discharge conveyor and magnet separator, motor power 298 kW, 1900 rpm, MTU diesel motor, rotor flight circle 575 mm, 2 x 12 cutting inserts on tool holder, show machine.

Properties < b >: < / b > Used Roller converter of manufacturer Overbeck Feet to be ordered separately Condition: fully functional with traces of use Ideal for the fast material handling Expertly disassembled and packed Interroll motor roller v-belt drive maximum width 68cm packages that can be implemented to converter < b > < /b > Converter with chains or straps gently raise the goods and settle it gently on the goal line. This includes both routes leave during recording and weaning shortly. Technical data < b >: < / b > Mass of the roller length: 2000 mm Total width: 600 mm Segment length: 750 mm the role < /b > details < b > Clamping length: 450 mm Diameter approx: 50mm Length: 100mm Material: Steel, galvanised the framework < /b > details < b > Frame height: 135mm Frame width: 30mm Ma ...

Machine is in perfect condition. All mechanical, electric parts were overhauled or changed to completely new. Along with the machine we provide 1 set of equipment for a clients bottle and basic change parts for a 2 years production. Capacity: 22500 b/h 18 months guarantee.

Technical data: Diameter over bed: 1550 mm Diameter over slide: 1600 mm Turning length: 5500 mm Max cross travel: 400 mm

Various threaded rollers

We offer a powered shears roller conveyor for sale. The length is variable: 3275 mm 8735mm max. Roll width 760 mm. Suitable for distribution centers and depots for the loading and unloading of trucks, containers and wagons. Stepless height adjustment. A very simple drive into various types of vehicles for its fast and safe loading and unloading. After use, can be easily folded away to save the space in the warehouse. Technical data: Length retracted: 3275 mm Length extended: 8735 mm Width: 760mm Adjustable height: from 730 to 1040mm Rows of rollers: 67 units Three-phase motor 120W Speed: from 5-35M / min. Control Panel x 1 piece Panel x 1 piece maximum load: 80kg / M Number available: 4 PCs. Net price: â?¬7750 / piece Delivery possible. Please specify your postal code and directly ask.

Basic refurbished Roller Master 4 in a row with basic overhauled MUC Machine was completely dismantled and rebuilt. Machine has new (own) PLC control Based on the WP control New pneumatics unit from Festo (German manufacturer) New belts, pneumatic cylinders On request with new pretzel discharge (extra charge) Test run with dough possible at any time. Installation and commissioning as well as production support If more information is needed, please report it briefly.

Properties: Used wheels car converter of manufacturer Mannesmann Demag Feet must be ordered separately Condition: Fully functional with traces of use Ideal for fast material handling Expertly disassembled and packed 7 STK. in stock Price per PCs. Converter Converter with chains or straps gently raise the goods and settle it gently on the goal line. This includes both routes leave during recording and weaning shortly. Technical data: Mass of the roller Overall length: 935mm Total width: 920 mm Information on the role Clamping length: 430 mm Diameter approx: 50 mm Material: Steel, galvanised Information on the framework Frame height: 135 mm Frame width: 30 mm Material: Steel Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, belt lifts, inclined conveyors or telescopes to the loading and unl ...

1 x Meccaniche Moderne 1500mm x 560mm dia two roll mill, Type: DUPLOCOM, Year 1984 but refurbished in 2001 to CE regulations. Peripherally drilled rolls, motorised nip adjustment (2.2kW to each roll), with 37kW, 1450rpm motor fitted to each roll, Friction ratio 1:1.24, Back roll speed 16.1rpm, front roll speed 12.9rpm, 3ph, 380V, 50Hz.

20pcs new rollers for HEIDELBERG SPEEDMASTER SM102

Qty. 1 Second-hand cold rolling mill Mfc.: SUNDWIG/MINO Type: 4-HI Built: 1980 Revamped: 2016 Rolled material: Carbon steel SAE1006, S235-S550, C45-C75, IF Strip width max.: 600 mm Thickness: in 6.0 mm out 0.25 – 5.0 mm Speed max.: 500 m/min Coil size: ID 508 mm OD 2000 mm Back-up roll dia.: 590 mm - 625 mm Work roll dia.: 190 mm - 240 mm Motors stands: DC, EAA converters (installed 2004), Rolling force: 500 Tons Coolant Emulsion Filtration by magnetic system Controls PLC system: SIEMENS Scada: Simplicity Thickness control: Entry stand hydraulic equipped with Automatic Gap Control (AGC) Thickness control: Exit stand Utilities: Electrical voltage: 380 V, 3 Phase, 50 Hz Air pressure: 5 Bar Cooling water No. of work rolls: 120 used + 8 brand new No. of back-up rolls: 8 Electric Drawings Mechanical Drawings Certification: Allegato V/8 ...