forging presses used for sale

automatic baler Manufacturer: PAAL Type: PACOMAT IS Year of construction: 1988 specifications: Pressing force: 35 t Specific pressing force: 5.51 kg/cm² Channel size: 700 x 700 mm Opening: 800 x 650 mm Drive power: 22 kW Throughput: 100 m³/h with additional manual hopper Wire flow in the pressing direction seen on the left side

Portal straightening press with 400 T capacity Oil-hydraulic double column press a) No-load and pressing speed up to 17 mm/sec b) Opening speed up to 60 mm/sec c) Table size 6000x3000mm d) Open height 1500 mm e) Total size approx. LBH 6000 x 5000 x 4500 mm f) OIL temperature display on the tank g) Lubrication via lubrication nipples h) table in grid construction, i) Operation on swivel arm, mounted on the bridge j) Pressure setting from 60 T to 400 T via MONITOR k) Bridge moves through two geared motors, over racks l) Cylinder moves to the left and right over racks m) Machine body powder-coated, or double-painted n) T-grooves according to customer requirements o) Cylinder induction hardened PORTAL PRESS Thermally neutral 80 – 120 °C Number of operating pages 3 pages Forces Pressing force max. 4000 kN Free tearing force ...

Dear Sir or Madam, We have in the offer for you The Tiger metal and scrap press.These are available with different press box dimensions and Bale dimensions (25 x 25, 30 x 30, 40 x 40). Cutting edges on all three sides of the box give the machine the ability to handle oversized materials. The machine is equipped with side pre-loading box, oil cooler and radio remote control. (further equipment possible) Out of stock. If you have any questions, please do not hesitate to contact us. To make an offer, we need your company data and a direct e-mail address.

New VDL 2D chiseling machine with the possibility of automatic drilling at distances of 25 and 32 with the possibility of tilting and turning in 2 directions. Technical parameters: Control of the machine with 1 lever Power of the main motor: 1.5 kW Tool speed: 2850 rpm Spindle diameter: 3 - 16 mm Stroke of the spindle: 180 mm Dimensions of the table: 600 x 450 mm Weight of the machine: 320 kg

Baler Paal Konti 200 D, built in 2000, optionally with matching conveyor belt Paal KEM-1400 Technical data: Manufacturer: Paal Type Paal Konti 200 D Year of construction 2000 Hours: 28155 Pressing force 60 t Drive power 45 kW Total connection 60 kW Filling opening 1020 x 1400 mm Bale dimensions 750 x 1100 mm, length variable 4-fold automatic tying throughput at 35 kg/m³ approx. 9.5 t/h 60 kg/m³ approx. 16.5 t/h 100 kg/m³ approx. 26 t/h Bale weight 450 to 650 kg Transport dimensions approx. 10123 x 2152 x 2720 mm (LxWxH) Machine weight approx. 15,000 kg Materials: paper, cardboard, foil The press is in good condition and has been inspected and tested. You can find a video on our website or YouTube channel. The complete documentation is available. Please note: All technical data refer to the manufacturer's specifications. We a ...

2 x 10 T, adjustable from 1.3 to 10 T Plunger size 250x250mm forward 10 mm second Backwards 25 mm second Travel 100 mm per side, Interior 200 to 400 mm Two-hand operation Motor 1 KW Tank for 60 L hydraulic oil the machine can also be supplied in other sizes and thicknesses.

pressure: 200 t distance between columns: 1600 mm max. ram stroke: 600 mm dayligth: 900 mm table width: 1600 mm table depth: 1300 mm table height: 1060 mm ram surface: 1600 x 1300 mm T-slots: Din 650 / 22H12 rapid traverse: 400 mm/s return speed: 325 mm/s pressing speed: 42 mm/s bei 40% mm/sec pressing speed: 20 mm/s bei 100% mm/sec die-cushion pressure: 800 kN die cushion stroke: 150 mm speed of die cushion: auf 68/ ab 225 mm/s The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Precise and heavy machine for drilling slotted holes. The maximum hole length is optional. In the standard version, it is 400 mm. The tool is fixed. The height is adjusted by raising the work table. Spindle power: 1.5 or 2.2 kW

Portal straightening press with 300 T capacity a) No-load and pressing speed up to 17 mm/sec b) Opening speed up to 55 mm/sec c) Table size 2500x1600mm d) Open height 700 mm e) Total size approx. LBH 4500 x 2300 x 3700 mm f) OIL temperature display on the tank g) Lubrication via lubrication nipples h) Table in grid construction, with T grooves according to customer requirements, otherwise 22mm i) Operation on swivel arm, mounted on the bridge j) Pressure setting from 50 T to 300 Tvia MONITOR k) Bridge moves through two geared motors, over racks l) Cylinder moves to the left and right over racks m) Machine body double painted n) Cylinder induction hardened Design Press type PORTALPRESSE Thermally neutral 80 – 120 °C Number of operating pages 3 pages Forces Pressing force max. 3,000 kN Free tearing force max. 500 kN Pressure build-up time Closed tool St ...

SPECIFICATIONS: Vertical frame press for windows and doors Hydraulic operation machining length mm: 3,000 machining height mm: 2,000 Installed capacity KW: 1.6 Beam 2 horizontal bars 3 Vertical bars with pusher

Nominal force 100 t Stroke - 250 mm motor 3 kW more info on request

Technical details Pressure 110 t Technology Passage width 1200 x 1000 mm Stroke 1200 mm Machine weight approx. 12 t Space requirement approx. 4500 x 4300 x 2700 mm Master cylinder 1 piece Installation height (distance table to plunger plate) 1200 mm Table height 700 mm Table can be extended by 1200 mm Table tiltable by 45 degrees Upper tool folds down by 180 degrees Table rotatable by 180 degrees Table load max. 10 t Travel speed of the table 25 mm/sec Flow speed 195 mm/sec Return speed 130 mm/sec Working speed adjustable from 0 to 10 mm/sec. Table area between the columns 1250 x 1000 mm Engines WEG Accessories Paint structure RAL 7035 (light grey) Additional information Painting cladding, doors, maintenance balcony RAL 1021 (Yellow) Painting accessories RAL 7021 (dark grey) Columns and cylinders are made of tool steel SAE 1045 (identical to German standard C4 ...

for pressing PET bottles

Inv. Num. : 5698 Type: LKT 250 Producer: METALPRESS Created: 1974, GO 2002 Parameters: Compressive force: 250 t Table length: 1150 mm Top table width: 1580 mm Maximum stroke rate top table: 7-25 1/min Ram stroke: 250 mm Adjusting the plunger: 100 mm Machine weight: 22950 kg GO 2002: converted to hydraulic clutch electronic control

ZTS KOSICE LE 160 C eccentric press was built in 1988 in Czechoslovakia by Závody Tažkého Strojárstva n.p. Košice. The machine is in very good technical condition and has been regularly maintained throughout its service life. All control solenoid valves were replaced in February 2023. ZTS KOSICE LE 160C is an excellent choice for a wide range of workpiece machining, i.e. punching, cutting and stamping. All of these machining processes are performed with a high press force of 160 tonnes, which, combined with a rigid design, enables the production of parts with high repeatability and excellent precision. The ZTS LE 160 C eccentric press weighs 10150 kg. Technical specifications of the ZTS KOSICE LE 160 C press - maximum press force: 160 t (1600 kN) - maximum number of slider strokes: 50/min - number of slider strokes in single mode: 30/min - maximum slider stroke: 120 mm -  ...

Stock number: U2391 Used rotary tablet press by Killian (DE) model T100/18 EU-B. Machine has 18 punches. Die dimensions: diameter 30.16 mm x height 22.22 mm. Working output from 5400 tablets up to 129600 tablets, depending on size, shape and product. Maximal tablet diameter 16 mm. Maximal filling up to 16 mm. Machine has hydraulical compression. Pre-compression force up to 60 kN. Main compression force up to 65 kN. Machine has local control panel and electric cabinet with work recording computer and printer. Technical documentation included with machine. Toolings not included.

used box press Manufacturer: PAAL Type: HS 34 specifications: Filling box size: 1,000 x 700 x 2,200 mm (W x D x L) Filling opening: - 1st filling: 2,200 x 1,000 mm - 2nd filling: 1,200 x 1,000 mm Press pressure: approx. 18 t Drive power: 4 kW Lifting speed pre-pressing and retraction: 2.5 m/min. Lifting speed repressing: 1.25 m/min. Bale size: approx. 700 x 1,000 x 1,300 mm Bale weight: up to approx. 300 kg Weight of the machine: approx. 2000 kg Machine dimensions: 3,500 x 1950 x 1,450 mm (L x W x H)

Frame press Hess hydraulic Type: HYDRO-LUX Crimping dimension approx. L 3550 m x W 2250 mm Connected load 380 V / 50 Hz 2.6kw Hydraulic Pump Machine dimensions Length 6600 mm x Width 1600 mm x Height 2770 mm 0 - 8 bar pneumatic Optoelectronic measurement query. The window scantlings are placed in the feed channel so that the photoelectric sensor can measure whether the pressure beams and press corners need to be opened or closed. If the light beam of the probe hits the window scantlings, the machine receives the command to drive up in width and height until the working dimension is reached. Workflow: Automatic dimensional adjustment loose insertion Automatic pressing process loose presentation remove Automatic dimensional adjustment Program selection options in the control system: 1. Automatic measurement adjustment via optoelectronic measurement query with a ...

Key data: 200 t, 500 mm, 200 mm

Lot 115: (1982) 200t Lauffer Hydraulic Press High-Speed Hydraulic Press with Advanced Shock Absorption This Lauffer hydraulic press is a high-performance machine designed for speed and precision, capable of 2,000 kN of pressing force. Its high-speed designation is backed by a rapid descent speed of 330 mm/sec and a sophisticated 8-fold flat guidance system to maintain ram alignment even under heavy or off-center loads. Technical Details Machine Type: Hydraulic Press Manufacturer: Lauffer Model: RPS 200 Year of Manufacture: 1982 Nominal Force: 200t Max. Return Force: 225 kN Max. Ram Stroke: 200 mm Shut Height: 500 mm Ram Guidance: 8-fold flat guidance Table & Ram Surface Area (W x D): 800 mm x 630 mm Table Hole Diameter: 204 mm Clearance Between Uprights (Front / Side): 840 mm / 320 mm Operating Speeds: Rapid Descent: 0 – 330 mm/sec (steplessly adjusta ...

used baler Manufacturer: STRAUTMANN Type: BaleTainer Year of construction: 2011 Machine no.: 407.00.360 for ramp loading specifications: Pressing force 60 t Main drive power 9.0 kW, Total connected load: 20 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 discs Bale weight up to 400 kg (3 discs) Binding 4-fold vertical Machine dimensions with task: 6,500 x 1,850 x 2,800 mm (L x W x H) Weight approx. 8,000 kg Control: S7-1200

Key data: 250 t, 500 mm

Lot 116: (2018) 250t Hidroliksan Hydraulic Press Hydraulic Press with Integrated Die Cushion for Deep Drawing This 2018 hydraulic double-column press is a heavy-duty production unit designed for versatility, featuring a robust 250-ton capacity and high-quality Rexroth and SICK components. With its 100-ton integrated die cushion and generous 500 mm stroke, it is exceptionally well-suited for complex deep drawing and forming operations that require precise pressure control. Technical Details ‍ Machine Type: Hydraulic Double-Column Press Manufacturer: Hidroliksan Model: H-TYPE Nominal Force: 250t Return Force: 50t Stroke Length: 500 mm Speeds: Approach: 160 mm/sec Pressing: 5 – 15 mm/sec Return: 190 mm/sec Working Surfaces: Ram Plate: 1,000 x 800 mm Table Plate: 1,000 x 800 x 100 mm Components: Pump: REXROTH (71cc – 103 L/min) Motor: 22 kW (30 hp),  ...

used baler Manufacturer: STRAUTMANN Type: BaleTainer Year of construction: 2014 Machine no.: 413.00.016 for ramp loading specifications: Pressing force 60 t Main drive power 9.0 kW, Total connected load: 20 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 discs Bale weight up to 400 kg (3 discs) Binding 4-fold vertical Machine dimensions with task: 6,500 x 1,850 x 2,800 mm (L x W x H) Weight approx. 8,000 kg Control: S7-1200

DIEFFENBACHER PO-F 1250 A hydraulic press was built in Germany in 1981 by J. Dieffenbacher GmbH & Co. The machine was regularly maintained and upgraded throughout its service life. In 2016, a major upgrade was carried out, which included replacing the electrical cabinet, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The piston seals were also replaced and measuring scales were added for precise position measurement of the slider, top ejector and lower die cushion. The DIEFFENBACHER PO-F 1250 A is an extremely versatile hydraulic press for demanding metal forming applications. Its main purpose is die stamping of steel components, calibration of forgings, dogging, hot and cold forging, cold forming and other operations that require very high press forces. All these machining processes are performed with a high press force of up to 1250 tonn ...

TMP VORONEZH KA2536 crank press was built in 1979 in the USSR by the Voronezh Mechanical Press Plant (Воронежский механический завод). The offered machine is perfect for many industries, especially those which require high press force and high repeatability of produced parts. This is because it enables even the most demanding metal forming processes to be performed, i.e. stamping of structural components, forming of parts, hot and cold forging, deep drawing operations and the production of parts with a large surface area. All of these machining processes are performed with a high press force of 400 tonnes and can be carried out continuously, increasing production efficiency and reducing downtime to a minimum. The crank mechanism used ensures uniform force transfer, which translates into precise slider feed and repeatability of each cycle. This solution is part ...

DIEFFENBACHER PO 500A hydraulic press was built in 1978 in Germany by J. Dieffenbacher GmbH & Co. The machine has been regularly maintained and upgraded throughout its service life. In 2017, a major upgrade was carried out, which included replacing the electrical cabinet, installing light curtains and adding a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel. The seals and electrical system were also replaced. The DIEFFENBACHER PO 500A is the perfect choice for even the most demanding metal forming operations. It enables the execution of such operations as die stamping, punching, calibration of forgings and hot and cold bending. All these machining processes are performed with a high press force of up to 500 tonnes, which, combined with a highly dynamic slider, guarantees the best machining results. The machine is also characterised by a rigid body made of thick steel plates and a ...

used baler Manufacturer: STRAUTMANN Type: BaleTainer Year of construction: 2014 Machine no.: 413.00.024 for ramp loading specifications: Pressing force 60 t Main drive power 9.0 kW, Total connected load: 20 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 discs Bale weight up to 400 kg (3 discs) Binding 4-fold vertical Machine dimensions with task: 6,500 x 1,850 x 2,800 mm (L x W x H) Weight approx. 8,000 kg Control: S7-1200

FRITZ MÜLLER ZE 625-4 hydraulic press was built in Germany by Fritz Müller GmbH & Co. KG. The machine has been continuously maintained and upgraded throughout its service life. The first major overhaul was carried out in 1988 by the manufacturer’s service Machinenfabrik Mueller-Weingarten AG. A second overhaul was carried out in 2020, during which the press was brought up to current safety requirements. As part of this overhaul, a new control system based on a SIEMENS SIMATIC S7 PLC controller and a SIEMENS SIMATIC HMI TOUCH touchscreen operator panel was installed, the entire electrical system was replaced, seals were replaced and light curtains were installed. The FRITZ MULLER ZE 625-4 is an extremely versatile press designed for even the most demanding metal forming operations. It is capable of performing operations such as deep drawing, stamping, forging, straightening large w ...

Vacuum press, vacuum table, vacuum table from Joos with silicone membrane Universally applicable press, veneer press for veneering, coating, mold gluing, mold veneering, edge banding, etc. With this press, you can do without a hydraulic veneer press, with some restrictions. New heat-resistant silicone membrane, extremely stretchy and easy to clean. Can also be used for forming preheated thermoplastic materials such as acrylic glass or solid surface materials. Inner frame dimensions approx. 2900 x 1410mm, usable area approx. 2800 x 1300mm Working height approx. 900mm Vacuum pump Becker VT4.40, 400V, 1.5 kW with 40 m³/h capacity and two vacuum tanks each 200 liters, thus comfortable working, fast evacuation. Electronic vacuum pressure switch, which means that the pump switches off when the vacuum is reached and does not run constantly Mobile on four swivel castors, lockabl ...

We sell a Fortuna A3 semi-automatic.

Double column press with 200 T output, Idle speed 45 mm/sec Opening speed 60 mm/sec Starting press speed 9 mm/sec Table size 2000x600mm Plunger size 2000x600mm OIL temperature monitoring Manual lubrication Free positioning of the plunger ( adjustable via adjustable sensors ) PILZ photoelectric sensors 14.1 mm on front and back Circulatory oil cooling Pressure retaining valve 0 to 600 sec. Mechanical plunger protection at the upper breakpoint T-grooves according to DIN, and according to customer requirements Pressure adjustment from 40 T to 200 T (adjustable via rotary knob) Travel limitation optionally via pressure or position Set-up operation, single stroke ( adjustable via key switch ) Two-hand operation Construction, commissioning, instruction against separate calculation Design Press design double column press Therma ...

Key data: 300 t

DURENDUS 300 T Workshop Press – Single Column Press – 1,600 mm Clear Width, 550 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 22.450 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 800 × 1,200 × 120 mm Pressure adjustment Lateral displacement  ...

used cabinet press Manufacturer: HSM Type: V-Press 825 plus pro Year of construction: 2018 Machine no.: 6152.324. Series No.: 570001118 specifications: Pressing force: 25 t Filling opening: 1,195 - 540 mm (W x H) Press box dimensions - 1,200 x 780 x 1,300 mm (L x W x H) Bale size: 1,200 x 780 x max. 700 mm Bale weight: up to 280 kg Drive power: 4 kW Cycle time at idle (theoretical): 39 sec. Binding: 4-fold - vertical with polyband Machine dimensions: 1,700 x 1,248 x 2,370 mm (W x D x H) Machine weight: 1,210 kg (Subject to errors in the technical data)

Key data: 400 t

DURENDUS 400 T Workshop Press – Single Column Press – 1,600 mm Clear Width, 550 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 35.950 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 800 × 1,200 × 120 mm Pressure adjustment Lateral displacement of ...

used cabinet press Manufacturer: HSM Type: VL 155.2 Year of construction: 2006 Machine No.: 6114.144. Series No.: 270174730 U specifications: Pressing force: 16 t Filling opening: 1,100 - 590 mm Filling chamber - 1100 - 700 x 1130 mm Bale size: 1.100x700x950 mm Bale weight: 110 - 200 kg Drive power: 4 kW Binding: 4-fold - vertical Capacity: 4 - 8 bales/hour Machine dimensions: 1,450 x 926 x 2,270 mm (W x D x H) Machine weight: 940 kg (Subject to errors in the technical data)

Key data: 500 t

DURENDUS 500 T Workshop Press – Single Column Press – 1,600 mm Clear Width, 550 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 46.950 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 800 × 1,200 × 120 mm Pressure adjustment Lateral displacement of ...

Vertical baler HSM V-Press 860 plus, built in 2021 Technical data: Manufacturer: HSM Type: V-Press 860 plus Year of Make: 2021 Hours: 423 Pressing force: 60 t Drive power: 4 kW Filling opening: 1195 x 645 mm Filling height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Binding: manual Theor. Idle cycle time: 25 s Theor. Pressing capacity: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (WxDxH) Weight: 2213 kg Materials: foil, paper, cardboard boxes Note: The press is in good condition. It has been checked and tested by us. You can find a video on our website or Youtube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. Th ...

I sell a press for adhesive wood gluing LISY DVORAK TH6, built in 2008. Material size 2600 X 1050 x 50mm 6 work surfaces, manual rotazion. 6 pcs hydraulic top pressures per area / pump 1.1KW 6 pcs manual pressures per area Self-weight 1350kg. Very good condition. Available the same.

clamping force: 1.300 kN injection volume: 230 cm³ screw diameter: 45 mm platen size: 685 x 685 mm Condition: used, Specification: injection moulding machine for TPE - used including Koch dosing unit clamping unit: - clamping force: 1.300 kN - heating platen size: 685 x 685 mm - Clear distance between tie bars: 470 x 470 mm - Mould installation height min.: 250 mm - Distance between platens max.: 900 mm - Opening stroke max.: 650 mm - Ejector stroke: 225 mm Injection unit: - Screw diameter: 45 mm x 18D - Injection volume max.: 230 cm³ - Injection part weight: 210 g/hp - Max. injection pressure: 1,670 bar - Screw circumferential speed: 75 m/min - Cylinder heating: 4x 2,200 W - Nozzle heating: 600 W - Connection value: 3x 400 V, 50 Hz - Electrical connection (back-up fuse): 100 A - Weight approx.: 6,3 ...

Roller compactor, miner - used - : Price from location: only 950.-€ (net) Manufacturer: Bergmann Type: PS 8100E Year of Make: 1990 Serial number: 05 3658 2845/90 Press pressure: to Net weight: 750kg 400V, 5.5kW, Condition: good Available: from Q4/2026 Location: Hamburg Efficient waste compaction: A special steel drum enables effective collection, crushing and compaction of the waste, reducing its volume by up to nine times. Continuous filling: The machine allows continuous filling by all users. The feed chute can also be left open during the work process, which facilitates and accelerates waste compaction.

Used briquetting press Manufacturer: Höcker Polytechnik Type: C30-12 Year of construction: 02/2003 specifications: Pressing capacity: up to approx. 30 kg/h (depending on material) Hydraulic motor power: 3.0 kW VBriquette diameter: 65 mm Residual moisture: max. 18 % Operating time (without cooler) max. 6-7 h Operating pressure: max. 180 bar Operating temperature hydraulic oil max. 60°C Working environment +5°C to +35 °C Machine weight: approx. 760 kg Container capacity: approx. 0.8 m³ Gearbox agitator: 0.37 kW Space requirement: 1,350 x 1,510 x 1,300 mm (L x W x H) -without pedestal Platform dimensions: 2,350 x 2,550 mm

Hydraulic press Pellegrini Hot water Pressing area 4000 mm x 1300 mm manual glue application incl. Insertion table Acceptance: Vacuum - Gantry forklift SIRIO

Hydraulic tire separator press type SEDA T-REC XXL. For quick separation of tire and rim. Also ideal for alloy rims.

Used belt press made by Kreuzmayr model KEB 750, made of stainless steel. Designed for fruit and vegetable processing. Technical specifications: - Rated capacity: approx. 2000 kg/h (depending on the type of fruit and operating conditions) - Juice yield: up to 75% (from healthy, firm apples) - Length L: 2610 mm - Width W: 1450 mm - Height H: 1642 mm - Belt width/length: 750 mm / approx. 8000 mm - Working width/height: 688 mm / 0–50 mm, infinitely variable - Belt feed speed: infinitely variable 1.0–5.2 m/min - Automatic belt tension adjustment - Weight: 1100 kg - Power supply: 230V/16A/1.4kW - Drive motor: 240V/0.75kW/50Hz - Washing unit motor: 240V/0.18kW/50Hz - Required air pressure: min. 8 bar - Water consumption: approx. 3 l/min

Specifications Maximum pressure: 60 tons Power supply: 380V/7.5kW Pressing force: 6.81 kg/cm² Year of construction: 2011-2012 Bale size: 800x1100x1200 mm Productivity: approx. 3 bales/hour Bale weight: approx. 370-410 kg Price: on request

For sale second hand briquett press mde from CF Nielsen, model BP 6500, cy 2008, well condition. Price: 95.000 EUR

Baler Strautmann, type BaleTainer, press force 60 t, year of construction 2012 Technical data: Manufacturer: Strautmann Umwelttechnik Type: BaleTainer Year of Make: 2012 Pressing force 60 t Total connected load 30 kW Bale dimensions 1,100 x 1,100 x 800 mm (W x D x H), 3 discs Bale weight up to 400 kg (3 discs) Binding 4-fold vertical Dimensions: 5,348 x 2,113 x 2,752 mm (L x W x H) Weight approx. 7,280 kg Materials: paper, cardboard, PET bottles, foil Note: The press is in working condition and has been inspected and tested. You can find a video on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale a ...

Specifications Maximum pressure: 60 tons Power supply: 400V / 7.5 kW Pressing force: 4.54 kg/cm² Year of construction: 2002 Bale size: 1200x1100x1100-1200 mm Productivity: approx. 2 bales/hour Bale weight: approx. 600 kg Price: on request Machine is fully functional, after technical inspection. We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

Used double-belt press made by Voran, model: ZBP1100. New 2017. The Voran ZBP1100 belt press is fully automatic and operates continuously, requiring only minimal supervision. Smooth adjustment of speed and pressing force guarantees optimum juice quality and high efficiency, reaching up to 80 per cent. The belt press is versatile and can be used for various types of fruit (stone fruit must be pitted before pressing), berries, vegetables and for drying various materials. The juice is discharged from the machine via a fitted juice pump. Particular attention has been paid to ensuring easy access to all parts of the system and their easy cleaning. Intended use: pressing apples, pears, berries, grapes and other soft fruits Technical specifications - Capacity: up to 7,700 kg/h (actual capacity depends on the type and quality of the raw material) - Juice yield: 80% - Loading or un ...

Specifications Maximum pressure: 60 tons Power supply: 380V/ 11 kW Pressing force: 6.81 kg/cm² Year of construction: 2012 Bale size: 800x1100x1200 mm Productivity: approx. 3 bales/hour Bale weight: approx. 370-410 kg Price: on request We have several channel balers and balers in our warehouse and we cordially invite you to contact us!

For sale second hand briquett press made by DIPIU. Completely renewed with overhauiln. Model MB 70. Price: 69.000 EUR EXW