forging presses used for sale

Make: Engel Type: Vertical Rubber Injection Model: ES 280V/40VT-ELAST Serial number: 41938, Year of manufacture: 2000 Clamping force 400kN Injection volume 280cm3 Platen size: 860x400mm In good condition.

PRESS FOR PRODUCTION ALUMINIUM TRAYS FOR ALIMENTARY USE COMPLETE WITH DOUBLE IMPRESSION MOULD-1100 CC. COMPOSED OF: A LUBRICATION UNIT 4-COLUMN MOLDING UNIT TOW-SCRAP CONTROL PANEL. 55 STROKES/MINUTE DEPENDING ON THE MOULDS. PASS COLUMNS FOR MOULDS UP TO 800 MM

sed Manesty Rotapress MK IIA rotary tablet press, 45 station, double sided, with pre-compression, keyed upper punches, With feed hoppers, force feeders, controls and associated parts.

JJZ-CP type press designed for the production of plywood, doors, MDF. The glued elements are fed and removed from the press automatically by means of driven rollers. The press can be used with glue feeders. Specifications: -max. pressure 500T/ adjustable/ -max. load height 1300mm -max. batch size 1300x2500 -press size 3600x1370x4500 mm -press foundation ~500 mm below the floor level -feeding table 2000x1960 mm -receiving table 2350x2500 mm -max. power 13.2 kW -Ce -capacity of 6 batches per hour Currently, we glue panel doors and MDF board on presses. Very good technical condition. We offer a plywood production line dedicated to these presses.

Number of punch stations 35 , output tablets 210,000/h , max. tablet diameter 13 mm , max. filling depth 18 mm , max. tablet thickness 8,5 mm , max. compression force 100 kN , max. initial compression force 20 kN , dieplate speed 15-100 rpm .

Lefort / Corema lid press P400 TE for bale size 400x400 mm, press box 3 m length, opened 1.2 m wide, each wing 90 t and final compressor 100 t pressing force. Drive 30 kW Rexroth pump.

THE WOOD PRESS FOR HIGH-QUALITY FUELS The RUF LIGNUM Classic wood briquette press is ideal for briquetting medium quantities of wood chips that accumulate in the woodworking industry. The briquetting process can generate additional revenue and reduce storage and transport costs. Another advantage is the flexibility of our wood briquette presses. You can press different material grains into high-quality briquettes without the need for a binder. As a result, RUF briquettes have a higher utility value and an optimal CO2 balance as a valuable energy source. Our LIGNUM series also impresses with high energy efficiency and low wear thanks to the innovative RUF hydraulics. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible -Longevity - Low maintenance costs - Compact design - Direct integration into existing production facilities possible Bto8iej998 - Experience f ...

BRIQUETTING WOOD CHIPS AND GENERATING ADDITIONAL REVENUE With our RUF LIGNUM R4 wood briquetting press, you can process medium to large quantities of wood chips, regardless of the type of wood, into high-quality briquettes in the best possible way – without the use of binders. Through the process of briquetting, you achieve higher revenues and at the same time reduce transport and storage costs. Our robust wood briquetting presses of the LIGNUM series impress with a long service life, low wear and can be integrated directly into existing production systems. The innovative RUF hydraulics also ensure high energy efficiency. YOUR BENEFITS AT A GLANCE - Fully automated 24-hour operation possible - Durability & low wear - Low maintenance costs - Compact design - High energy efficiency - Experience for over 35 years ADVANTAGES OF RUF BRIQUETTES - Additional revenue for briquett ...

Rotative tablet press of 27 stations Max. diameter of the tablet 16 mm Filling depth 18 mm Pressing capacity 80 Kn Prepressing capacity 20 Kn Production from 48.000 to 100.000 h Dimensions : 1.000 x 950 x 1876 . Weigh 1850 Kg. Force feeder Type of tool : B

McIntyre M20 Can / Metals Baler Protect the environment and generate income by baling aluminium and steel cans. Versatile The M20 Baler is not only a cost effective system for cans but can also be used for many other applications where automatic volume reduction or product destruction is required. The M20 Baler will accept cans up to 250mm x 480mm and will produce up to 500kg of 20g aluminium drink cans per hour. The smaller the size of the can, the greater the machine output. When fed with aluminium drinks cans, the M20 crushes and locks the material together to produce dense 274mm cubes, weighing approximately 9- 11kgs. Such dense bales means that no tying or strapping is needed. The cubes are simply ejected from the machine and ready for transportation. Optinally, you can buy it, with can sorter!

Number of punch stations 55 , output tablets 594,000/h , max. tablet diameter 13 mm , max. filling depth 18 mm , max. tablet thickness 8,5 mm , max. compression force 100 kN , max. initial compression force 20 kN , dieplate speed 15-90 rpm . Dimensions of the machine : 1490 x 1230 x 2100 , weight approx. 3750 Kg

McIntyre Drum Crushers McIntyre fully automatic drum crushers are able to reduce 45 gallon (205 litre) drums down to discs with a thickness of only 100mm (4”), saving you space and cutting your transport and disposal costs. Choice of machine Two models are available, able to process all drum types, sealed or topless, up to 45 gallons (205 litres). Both machines are fully automatic and can be adapted to handle smaller drums or tins. The main difference between the two models is the speed at which they operate. The high-speed version has been designed for the processor with a large quantity of drums, and will handle up to 100 x 45 gallon (205 litre) drums every hour. This machine also comes with a separate portable power pack, which can easily be connected to other hydraulic equipment. The standard machine is designed specifically for the customer with only a limited amount of drum ...

automatic baler Manufacturer: PRESONA Type: LP 65 VH 2 Year of construction: 2012 specifications: Press force: 65 t Specific pressing force: 7.87 kg/cm² Drive power: 45 kW Throughput: 370 m³/h Filling opening: 1,500 x 1,100 mm Channel format: 750 x 1,100 mm (H x W) Bale weights: up to approx. 425-575 kg Setting: 5-fold vertical Oil tank: approx. 1,000 ltr. capacity Machine weight: approx. 26 t Optionally with chain conveyor belt Manufacturer: BLUETECH Type: Chain Conveyor Belt Year of construction: 2012 Specifications: Conveyor width: approx. 1,500 mm Feed length: approx. 5,000 mm Climbing length: approx. 10,500 mm according to attached pictures

Tablet press Fette P2000 Tablet output: 250.700/h mechanical speed Number of station: 43 stations Tablet diameter max: 13 mm Compression force max: 80 kN Initial compression force: 20 kN Type of tool : EU Norm BB Height of the machine with filling hopper : 1950 mm Project floor area : 1212 x 1126 Weight: 2200 Kg Year of manufacture :1993

automatic baler Manufacturer: PRESONA Type: LP 65 VH2 Year of construction: 2007 specifications: Press force: 65 t Specific pressing force: 7.27 kg/cm² max. oil pressure: 265 bar Press force pre-press: 25 t Drive power: 45 kW Throughput: approx. 370 m³/h Filling opening: 1,500 x 1,100 mm Channel format: 750 x 1,100 mm (H x W) Bale weights: up to approx. 420-570 kg Setting: 5-fold vertical Oil tank: approx. 1,000 ltr. capacity Machine weight: approx. 21 t Optionally with chain conveyor belt Manufacturer: BLUETECH Type: Chain Conveyor Belt Year of construction: 2007 Specifications: Conveyor width: approx. 1,500 mm Feed length: approx. 6,000 mm Climbing length: approx. 10,500 mm according to attached pictures Subject to errors in the technical data.

Tablet output: 234.000/h (mechanical speed) Number of station: 37 stations Tablet diameter max: 25 mm Filling depth : 21 mm Die plate speed : 25 – 100 RPM Compression force max: 100 kN Initial compression force: 10 kN Type of tool : EU Norm D Height of the machine with filling hopper: 2135 mm Project floor area: 1260 x 1280 Weight: 2840 Kg

Pressing length: 3200 mm Pressing height: 2000 mm Functional principle: Hydraulic (horizontal/vertical) Space requirement mm: 3500 x 1200 x H 2750

PLC – controlled (touch screen) multifunctional press with multiple functions Firstly, our multi-function press is a vacuum press, three-dimensional film deformation with or without membrane. Vacuum chamber size 2,340 x 1,340 mm Maximum workpiece height 60 mm Equipped with a vacuum diaphragm at the top and bottom. The press is equipped with a powerful vacuum system and a vacuum tank, which guarantees a constant and uniform supply of vacuum to the working chamber. Drive power vacuum pump 4.5 kW Vacuum tank volume 500 liters Vacuum pump flow rate 100 m³/hour Two pieces of air heat exchanger, each with a heating capacity of 3 kW. Secondly, our multi-function press is a hydraulic plate press with ten pieces of press cylinder and 200 tons pressing force – Suitable for different applications - - Cold and hot pressing - Single-sided and double-sided veneer pressing ...

N° of Stations 35 Output tablets per hour 70.000 - 210.000 Maximum tablet diameter 16 mm Maximum depth of fill 8.5 mm Upper punch entry 1.5 - 8 mm Die type B tooling Die diameter 30.1 mm Die height 22.22 mm Upper/lower punch length 133 mm Punch body diameter 19.05 mm Compression force 80 kN Power 3.75 kW Net weight 1143 Kg Can be also for doble layer.

Weingarten Excenter Press

Used Goodnature cold press, model X-1. Year of production 2014. Capacity up to 1,000 bottles per day. Power supply 220V 50Hz X-1 is a professional press capable of producing a thousand bottles of cold-pressed juice per day. X-1 is used by successful cold-pressed juice producers, nut milk producers and cider producers. The machine is almost unused. She worked several times. The bags have been the same since new - they show minimal wear. It's like brand new. Everything works fine without any problems. Perfect machine for small juice producers, large grocery stores or juice shops. It can also work in the production of nut milk or cider. The machine is very easy to clean and maintain. Comes with 3 different shredding discs and 2 bags. Original user manual. The juice is squeezed gently but firmly. The operator sets the pressure and controls the time. It can work fast with lower effi ...

Rotary Press 23 Stations upgraded with a new rejection system C50 V This rotary tablet press is suitable for manufacturing tablets up to a dia. of 16 mm The machine is designed to accept IPT Type B tooling and has a capacity of 23,000 up to 136,000 tablets per hour. Technical specifications: Compression: max. 80 kN Pre-compression: max. 23,0 kN Tablet Diameter: 16 mm Depth of fill: 16 mm Output: 23.000 - 136.000 tablets/hour Die diameter: 30,16 mm

PLASOMAT PMS 63 CP eccentric press was manufactured in Poland in 2004. In order to meet all production requirements, the machine features a large area slider with the possibility of adjusting the height and number of strokes in the control cabinet. In addition, a stable, deformation-resistant monolithic structure combined with a high pressing force of 63 tonnes ensures the highest accuracy and precision in machining. All this makes the PMS 63 CP press the ideal choice for both small batch and high volume production. The offer includes additional equipment, consisting of among others 8 anti-vibration pads and an intermediate table. Technical specifications of the PLASOMAT PMS 63 CP press - maximum press force: 63 t (630 kN) - work table dimensions (L x W): 800 x 560 mm - number of slider strokes: 65-85/min - maximum slider stroke: 110 mm - minimum slider stroke: 8 mm - slider adj ...

Rotary Press 23 Stations Kilian LX 23 A ST , the machine was recently updated with a rejection system and control unit C50V This rotary tablet press is suitable for manufacturing tablets up to a dia. of 16 mm The machine is designed to accept EURO-NORM Type B tooling and has a capacity of 23,000 up to 136,000 tablets per hour. Technical specifications: Compression: max. 80 kN Pre-compression: max. 23,0 kN Tablet Diameter: 16 mm Depth of fill: 16 mm Output: 23.000 - 136.000 tablets/hour Die diameter: 30,16 mm

HENKE UNI 2000-6000 Built in 1995 Format: 400x400 2-speed 400x600 2-speed 1. Distributor for attachment 2. Doser 3. Settling device 4. Chain conveyor 5. Roller conveyor 6. Plate destacker 7. Cleaning device 8. Plate oiler 9. Pawl conveyor 10. Stacking device 11. Plate removal device with rotating device 12. Control for UNI 2000 13. Belt conveyor with lifting 14. Belt conveyor 15. Plate Displays 16. Carrier chain conveyor 17. Push-off device with roller table 18. Autom. Control for packaging 19. Fader Puller HENKE UNI 2000-6000 Year of production: 1995 Sizes: 400x400 2x 400x600 2x 1. First layer distributor 2. Dozer 3. Take-off device 4. Chain conveyer 5. Roll conveyer 6. Destacking device 7. Cleaning device 8. Oiling device 9. Slap converter 10. Stacking device with rotating device 11. Arm with rotating device 12. Control for UNI 2000 1 ...

automatic baler Manufacturer: PAAL Type: KONTI 275 C Year of construction 1996 specifications: Press force: 65 t Specific pressing force: 7.88 kg/cm² Channel format: 750 x 1,100 mm Bale weight: 450 - 600 kg, depending on material and bale length Filling opening: 1,550 x 1,020 mm Drive power: 45 + 30 kW Throughput: 380 m³/h Pressing capacity: - approx. 13.0 t/h at department store (35 kg/m³ bulk density) - approx. 23.0 t/h for mixed paper (60 kg/m³ bulk density) - approx. 35.0 t/h for collected goods (100 kg/m³ bulk density) Setting: 4-fold vertical Machine weight: approx. 21.0 t Optionally with feeding belt according to photos

Briceder press RSN SP 250 P Don't. # 02 782 Without a control cabinet/control Without hosting 700 l cooling water tank available for hydraulick units L x B x H: 120 x 80 x 120 cm Built in 1992 Weight about 750 kg Dismantling by buyers The machine is in good condition, operational. Changes, errors, intermediate sales reserved! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

automatic baler Manufacturer: PAAL Type: KONTI 275 D Year of construction: 2002 Operating hours: approx. 30,000 hours Main parts of the press: 1 automatic channel press 1 automatic lacing 1 hydraulic system 1 electrical control specifications: Press force: 75 t at 300 bar Specific pressing force: 9.09 kg/cm² Duct cross-section (h x w): 750 x 1,100 mm Filling opening: 1,020 x 1,550mm Number of binding wires: 4 pieces vertical Drive power: 1 x 75 kW Throughput: up to approx. 350 m³/h Hydraulic oil tank volume: 2,200 l Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Other features: - Automatic cutting edge release - Large digit display for bale length and fault indication

Technical data Manufacturer: Otto Schröder Stroke: 160mm hand adjustable Distance between the stand: 800mm Pass: 250mm Support table: 800mm, with 4 grooves subcircle of 400mm groove dimension 25x75mm Bore: table center of 70mm Table height: 835mm Dimensions: LxWxH 110x900x2200mm

Wehmoner Membrane Press

Working Sizes: 1300 x 3500 mm

ULTRAPRAS UPV100TT SPECIAL hydraulic press built in 2022 Poland is the perfect choice for a range of demanding cold metal forming operations. This highly efficient and versatile machine can perform such operations as precision bending, profiling, flattening, bending, hole punching and stamping. Inside the robust design, there is a power unit-powered hydraulic piston with a diameter of 220 mm, which performs all these machining processes with a high press force of 100 tonnes. In addition, the entire working area is protected by light curtains, thanks to which the UltraPras four-column press also offers a high level of operational safety. During its service life, the machine has operated for just 595 hours and completed a total of 37042 work cycles. The UPV 100 TT SPECJAL 100t hydraulic press weighs 6500 kg. Technical specifications of the ULTRAPRAS UPV100TT SPECIAL press - maximum pre ...

McIntyre 2035 Metals Baler An affordable metal baler, powerful enough to match the performance of much larger machines Strong, powerful, versatile Don't be deceived by the size of the McIntyre 2035 metal baler. A lid shear force of up to 22 tonnes and a platen force of up to 45 tonnes ensure that this machine has enough power to bale a whole range of non-ferrous metals. Heavy duty, four sided, reversible lid shearing blades make light work of oversized materials and in little more that 30 seconds, the 2035 will produce baled material to the size of 14" x 8" (355mm x 200mm)

McIntyre 5025SB Metals Baler An affordable metal baler, powerful enough to match the performance of much larger machines Strong and reliable In line with all JMC machines, the 5025SB has been designed and built to last. The first 5025SB was built over 20 years ago and is still in constant daily use. The 5025SB has cutting blades around all three sides of the box so can handle oversized material. It has a fast cycle time and would be a valuable asset to any metal recycling facility.

Dough dividing and rounding machine Bread Press TOP Model Fortuna Automat Gr. 3+ with active shutdown Intervention protection with protective corners Head cleaning to the rear electrically Dividing head with stainless steel knife NEW Dough insert up to 2400g depending on TA Dough divider with 3 new knitting plates E-system NEW with rewind button DGUV V3 tested Connection 400V, 1.6 kW, 16A-CEE plug Dimensions: 720 x 800 x 1510 mm WxDxH Used machine overhauled with 6 months warranty + spare parts service Option: Platform or chassis Cast Plate Service Package Maintenance contract E-Box Many more TOP dough dividers in stock!

McIntyre Semi-automatic Terminator Metals Baler Designed to act as both a baler and a heavy duty yard shear, effectively combined to create one robust unit. New features The McIntyre Terminator combines all the best of McIntyre’s baler technology with several new features. Innovations include a sorting table which surrounds the front and sides of the bale box, acting both as an aid to loading and as a safety barrier between the operator and the lid. The Terminator also comes with a bale track which carries baled material away from the machine to an ideal height ready for unloading.

TABLET PRESS MANESTY BETAPRESS N° of stations: 16 Operating pressure: Max. 6.1/2 Diameter of punches: 19 mm Length of upper punch: 133.6 mm Length of lower punch: 133.6 mm Max. mechanical speed: 90.000 Height of machine: 160 mm Floor space occupied: 584 mm x 851 mm Approx. weight of machine: 695 Kilos

Working Sizes: 1300 x 3500 mm

PressOne P1S-5 is a press-fit machine from Finland that is powered by a ball-circuit spindle with servo motor. This gives you the best of both worlds. Power, speed and accuracy. No oil means no leakage problems, no rush of oil changes and no filtration problems. Only pure power, accuracy and speed! Specifications: P1S-5 Main press technology: ball-circuit spindle with AC servo drive Maximum pressing force: 50 kN Repeatability of the force adjustment: . . . . . . . . . . . . . . . . . Maximum opening speed: 50mm/s Approach speed: 50 mm / s Pressing speed: max 10 mm / s Extension: 470 mm Stroke length: 210 mm Faster range: M2 - M10 Servo motor: 0.6 kW Control: P1S TC12 Touchscreen 12" Tool connection: Type Haeger, 4-fold lower rotary base The maximum approach speed requires the "Fast Approach Speed" option. Control features of the P1S TC12: - Programmable pressing f ...

It is a special hydraulic chip press designed to achieve the best compaction quality with maximum flexibility in application. It is designed for the recycling and compaction of metal chips (which are shredded if necessary) from machining by converting them into cylindrical briquettes. When it comes to disposing of metal chips, the Styrotec briquetting press saves a lot of money and increases profits by turning waste into a resource. It can be installed both indoors and outdoors. Your benefit: - Volume reduction of up to 90%, which gives you more free space in the warehouse - Higher sales price leads to a quick return on investment - Reduction of handling and transport costs by up to 80% (in-house and during disposal) - Reduction of recycling costs of up to 90% through better recyclability - Reduction of environmental impact Production (general): 20-50 kg/h Briquette diamet ...

Description of the chip press: Powerful metal chip press with chip shredder for long turnings. The area of application is the processing of large quantities of milled and turning chips. Materials: aluminum, steel, cast iron Drip pan as oil tank Geared motor for optimal agitator operation Hydraulic Compression Cylinder Hydraulic press cylinder with two coaxial sections Diameter of briquettes 60 mm Automatic briquette length adjustment with displacement transducers Inductive Proximity Sensors Pre-compaction cylinder in conjunction with special compression hydraulic cylinder that compacts the material in the bushing-bulkhead unit Briquette ejection system, consisting of a compression chamber and a bulkhead with special anti-wear treatment Highly efficient closed-circuit oil cooling system consisting of an air/oil heat exchanger Hydraulic system with B ...

ULTRAPRAS WKR70H hydraulic press built in 2021 by the Polish company SAKOMET is designed for even the most demanding cold metal forming operations. The operations, such as precise cutting, stamping, punching and extruding of workpieces, are performed with a force of 16 tonnes using a hydraulic cylinder with a diameter of 100 mm. Induction limiters additionally allow adjustment of the piston advance and retraction limits, making the machine adaptable to the working range of various tools. In turn, centrally beneath the piston is a large cross-cut work table with a 90mm diameter bore. The UltraPras WKR 70H 16t hydraulic press weighs 420 kg. Technical specifications of the ULTRAPRAS WKR70H press - press force: 16 t - piston stroke: 70 mm - piston diameter: 100 mm - maximum working speed: 9.8 mm/s - minimum working speed: 2 mm/s - return speed: 20 mm/s - work table dimensions (L x  ...

automatic baler Manufacturer: UnoTech Type: UPAMAT 40 H3 Year of Make: 2013 Operating hours: approx. 5,000 specifications: Cutting force: 480 kn at 315 bar Press force: 400 kn at 260 bar Filling opening 1,250 x 920 mm Channel format: 700 x 1,000 mm (H x W) Drive power: 15.0 kW Pump flow rate: 50 Ltr./min. Pump: Double Gear Pump Required oil quantity: 200 Ltr. Oil type: HLP ISO 68 Throughput: - 1.8 t at 20 - 30 kg/m³ bulk density - 3.0 t at 35 - 50 kg/m³ bulk density - 3.5 t at 60 kg/m³ bulk density Bale weight: up to approx. 320 kg Binding: 3-fold horizontal Wire push-through: seen in the direction of pressing on the left side Control: Siemens S7, IM-151 Dimensions: Width approx. 4,202 mm Length approx. 7,185 mm Height approx. 2,060 mm Machine weight: approx. 7,000 kg Noise emission: approx. 82 - 85 dB ...

Baler Paal Pacomat II with hopper, built in 1979 Specifications: Manufacturer: Paal Type: Pacomat II Year of Make: 1979 Drive power: 11 kW Pressing force: 27 t Channel cross-section: 700 x 1000 mm Filling opening: 1000 x 650 mm Flow rate: approx. 60/115 m³/h Bale size: 700 x 1000 mm Bale weight: up to 400 kg Machine dimensions: approx. 7000 x 2000 x 2000 mm (LxWxH) Machine weight: approx. 5200 kg Materials: paper, cardboard, foil Remarks: The machine is in working condition. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or our Youtube channel. Viewings, also under power, are possible at any time by arrangement. On request, we also carry out tests with your material for an expense allowance. We will also be happy to answer any questions you may have about the machine by phone from Monday to Thursday from 08.00 to 14.00 ...

Vertical baler Dixi 50 S, built in 2019, very good condition Specifications Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 50 S PET Year of Make: 2019 Drive power: 7.5 kW Press force: 50 t Press time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300-350 kg Binding: manual Transport dimensions: 1800 x 2000 x 2300 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, foil, polystyrene, fleece, glass wool, etc. The operating instructions and EC declaration of conformity are available in German. Remark: The machine is in very good condition. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or our Youtube channel. Viewings, also under power, are possible at any time by arrangement. On request, we also carry out tests with yo ...

Vertical baler Dixi 50 S, built in 2019 Specifications Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 50 S PET Year of Make: 2019 Drive power: 7.5 kW Press force: 50 t Press time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300-350 kg Binding: manual Transport dimensions: 1800 x 2000 x 2300 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, foil, polystyrene, fleece, glass wool, etc. The operating instructions and EC declaration of conformity are available in German. Remark: The machine is in very good condition. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or our Youtube channel. Viewings, also under power, are possible at any time by arrangement. On request, we also carry out tests with your material for an ex ...

Capacity, ton 1250 Stroke, mm 500 Min number of no-load stroke: 8 /per min Slider adjustment, mm 215 Max. shut height between bolster plate and slider (stroke down, adjustment up), mm 860 Table size, mm 1600 x 1850 Slider size, mm 1300 x 1400 Table gap size, mm 1100 x 1100 Distance between columns, mm 1630 Distance between slides, mm 1580 Cushion travel, mm 200 Cushion capacity, ton 200 main motor power, kW 90 Press weight, kg 130000

Vertical baler Dixi 50 S, built in 2020, very good condition Specifications Manufacturer: Maschinenfabrik Bermatingen Type: Dixi 50 S PET Year of Make: 2020 Drive power: 7.5 kW Press force: 50 t Press time: 23 s Filling opening: 1200 x 620 mm Filling height: 1000 mm Bale size: 1200 x 800 x 830 mm Bale weight: 300-350 kg Binding: manual Transport dimensions: 1800 x 2000 x 2300 mm Weight: 2300 kg Materials: PET bottles, HDPE/LDPE/PP, hollow bodies, big bags, textiles, foil, polystyrene, fleece, glass wool, etc. The operating instructions and EC declaration of conformity are available in German. Remark: The machine is in very good, mint condition. The seals on the 2 cylinders for the retaining clamps have been replaced. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or our Youtube channel. Viewings, also under power, are  ...

Table press, pneumatically operated Manufacturer K & W Beyer O.H.G Type Q10EL Power at 6 Atü 10 mkg Triggering the movement via electric valve Special price

Bread rolls Stüpfler stainless steel 380 volts -30 in part