137,879 used machines on RESALE, but how to find them? Machine Search
pressure: 25 t throat: 250 mm stroke: 400 mm table surface area: 600x480 mm ram surface: Ø135 mm table height: 980 mm weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2000x2000x2700 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 20 t
20T Durendus C-Stand Assembly & Small Batch Press For sale is a C-column assembly and small series press from the manufacturer DURENDUS with a maximum press force of 20 T. The machine has a table size of 700 × 920 mm, a maximum installation height of 550 mm and a stroke of 400 mm, making it suitable for assembly work, small series production, press-fit work and straightening processes in industrial use. Technical data + information: C-Stand Assembly & Small Batch Press – 20 T – 700 × 920 mm General information - Type: C-frame / single-column press - Manufacturer: DURENDUS - Press force: 5–20 T (adjustable) - Max. installation height: 550 mm - Table size: 700 × 920 mm - Crimping head: Ø 100 mm - Table height from the ground: 1,000 mm - Overall dimensions (WxDxH): 900 × 900 × 2,340 mm - Total weight: approx. 1,200 kg - T-slots: DIN 650 – 22 mm or accordin ...
Working width: 3500 mm Working height: 2500 mm # 6913 Hess Quickstep frame press --------------------------------- Sold on behalf of the customer in its current condition Technical data summary (please enquire about any additional accessories included) -------------------------------------- General --------------------------------------- Working width: 3500 mm Working height: 2500 mm Features: -------------------------------------- > hydraulic: yes > Number of vertical press cylinders: 3 > Number of horizontal press cylinders: 2 > Vertical adjustment type: electric (long stroke cylinder) > Horizontal adjustment type: electric > 1 medium pressure bar According to the customer, the control system has been renewed and the hydraulic pump with connections has been renewed (technical information according to the manufacturer - no guarantee!) The data for this ad was created with ModulMWS - t ...
Key data: 250 t, 800 mm, 650 mm
LCM Taiwan, 250 tons hydraulic press Possible to inspect under power New in 2014 Table 800x800 mm Stroke 0-650 adjustable
Key data: 600 t, 800 mm, 650 mm
LCM Taiwan, 600 tons hydraulic press New in 12/2014 Table 800x800 mm Stroke 0-650 mm adjustable full specifications attached Possible to inspect under power
Key data: 400 t, 1000 mm
LAUFFER PRESSES hydraulic press model VA 400 Capacity 400 tons Table 700x1000 mm Possible to inspect under power
Key data: 300 t, 600 mm, 400 mm
OZKOC 300 tons hydraulic press monoblock frame New in 2025, almost new Table 600x600 mm Stroke 400 mm Possible to inspect under power
Key data: 300 t, 800 mm, 500 mm
HURSAN 300 tons hydraulic press Year of manufacturing 2021 Table 800x800 mm Stroke 500 mm Possible to inspect under power
A pneumatic toggle press is offered. Press force: 4500kg, stroke: 40mm, throat depth: 125mm, working height: 60mm - 320mm. Machine frame, maintenance unit, mechanical fine adjustment, T-slot table X/Y: 200mm/160mm. Weight: approx. 180kg, overall dimensions X/Y/Z: approx. 800mm/600mm/1800mm. Inspection possible by arrangement.
Block size press Müro 5000/A4 WT; cleaned and tested; insertion width 350mm; Insertion height 520mm; 1x dryer. Padding press Müro 5000/A4 WT; cleanded and checked; width 350mm; hight 520mm; one heater.
Offer 26149 Technical data: - Compressive force 125 t - Projection 340 mm - Table size approx. 1000 x 680 mm - Diarrhea hole in the table approx. 300 x 200 mm - Largest installation height approx. 500 mm - Tappet area approx. 600 x 300 mm - Peg hole in the tappet 50 mm - Plunger adjustability 75 mm - Stroke adjustment 20 - 180 mm - Stroke rate 80 1/min - Light barrier - Hydraulic clutch - Pneumatic dampers - Two-handed operation - Central lubrication - Separate control cabinet with control units - Pneumatic connection 6 bar - Drive 400 V / 16.5 kW - Space requirement approx. W 1700 x H 2900 x D 2700 mm - Weight approx. 9400 kg
Key data: 15 t
C-Press – 15 T – 300 × 300 mm For sale is a C-press from the manufacturer DURENDUS with a maximum pressing force of 15 t. The machine has a table size of 300 × 300 mm, a maximum installation height of 350 mm and a stroke of 250 mm, making it suitable for press-fit work, assembly processes and small series production in industrial use. Technical data + information: General information - Type: C-frame / single-column press - Manufacturer: DURENDUS - Press force: 15 T - Table size: 300 × 300 mm - Plunger plate: 300 × 300 mm - Max. installation height: 350 mm - Working height: 800 mm - Total height: approx. 2,000 mm - Total width with control cabinet: approx. 900 mm - Total depth: approx. 1,300 mm - Total weight: approx. 1,100 kg - Plunger plate guide: 2-fold Hydraulic cylinders - Stroke: 0–250 mm - Working pressure: 250 bar - Start-up speed: 17 mm/s ...
Just Arrived Baler Paal Konti 325 G, built in 2013 Technical data: Manufacturer: Paal Type Konti 325 G Year of construction 2013 Hours: 12110 Press force 100 t Drive power 2 x 55 kW Filling opening 1020 x 1750 mm Bale dimensions 750 x 1100 mm, length variable Setting 5-fold automatic Throughput at 35 kg/m³ approx. 13.5 t/h 60 kg/m³ approx. 21.5 t/h 100 kg/m³ approx. 33 t/h Bale weight up to 800 kg Transport dimensions approx. 12216 x 2530 x 2800 mm (LxWxH) Machine weight approx. 28,000 kg Materials: paper, cardboard, light waste, plastic waste Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time. Visits are possible by arrangement. The sale against advance payment is made ex works, w ...
Plate dimensions: 2.500 x 1.1250 mm Daylight opening: 300 mm Number of daylights: 1 St. Heating: Specific pressure: kg/cm² Total pressure: to Motor output: kW Dimensions (L/W/H): mm weight of the machine ca.: ca. 3 t kg Year: unbekannt Year: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Bruderer BSTA200M High-performance automatic punching press. Max. pressure: 200 kN (20 T). Speed range: 100 – 1800 spm. Year of manufacture: 1996. Hours under power: 51574. Feed BBV 101/75 on the left-hand side. Max. strip width: 125 mm. Max. feed pitch: 85 mm. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 mm. Ram height adjustment: 51 mm. Dimensions of the clamping plate: 510 x 400 mm. Bed opening: 400 x 160 mm. Max. distance of the mold width between the columns: 410 mm. Max. strip passage width: 260 mm. Connected load: 51 kVA. Power 400 V 50 Hz. Control voltage: 24 V. Machine dimensions: H 2540 x W 1661 x D 855 mm. Machine weight: approx. 3100 kg. Control cabinet and control system. Including all original technical documentation. Machine is now under power. Sound cabin sold separately, not included in machine price.
Platform Base for Fortuna Roll Presses Mobile Stationary Suitable for Fortuna automatic roll presses and other manufacturers (Fortuna semi-automatic, fully automatic machine, size 3/4) With deep heavy-duty castors or stationary as required With screw-on thread Made of solid stainless steel plate
FOR SALE: BRUDERER BSTA 60 High-Speed Stamping Press With Automatic Strip Feeder BBV 300/200 600 kN | 100–800 spm | Fully automatic | Top-tier Swiss quality Technical Specifications Nominal force: 600 kN Stroke rate: 100–800 strokes per minute Max. feed length: 200 mm. Year: Unknown (No ID Plate) Tested under power: 2025 Drive power: 30 Hp Control voltage: 24V AC Power connection: 440VAC / 50Hz Adjustable stroke: 20 / 25 / 31 / 38 / 45 /51 / 58 / 64 / 70 / 76 mm Shut/Ram height adjustment: 80 mm Max tool installation width: 620 mm Strip pass width: up to 320 mm Ram area: 800 × 500 mm Table area: 620 × 680 mm Max strip width: 300 mm Max feeding pitch: 200 mm Max material thickness: 6 mm Feeding angle: 180 Deg Machine footprint (L × W × H): 2210 × 2075 × 2190 mm Weight (approx.): 8,000 kg Feeder BBV 300 – fully synchronized mechanical strip feeder system ...
pressure: 3,3 bei 6bar t dayligth: 250 mm stroke: 70 mm work stroke: 10 mm table surface area: 220x190 mm throat: 150 mm weight of the machine ca.: 350 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 30 t stroke: 300 mm daylight between the columns: 700 mm dayligth: 850 mm : 140 mm diameter of piston: 60 mm table surface area: 700 x 390 mm weight of the machine ca.: 0,35 t dimensions of the machine ca.: 1,2 x 0,8 x 2,2 m Workshop Press - Movable cylinder - 2 support prisms - Emergency stop device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This high-speed precision stamping press, manufactured in 1987, delivers a maximum pressing force of 80 tons (800 kN) and is designed for demanding progressive-tool applications. With an operating range of 100–1000 strokes per minute, it combines high productivity with exceptional process stability. The machine features adjustable stroke lengths from 16 to 63 mm, a ram adjustment of 76 mm, and supports tools up to 970 mm width. A Bruderer BBV 202/120 strip feeder is included, allowing strip widths up to 202 mm and feed pitches up to 120 mm, ensuring precise material handling. The soundproof cabin is not included in the offer, but it can be purchased separately. We also have many additional Bruderer, Schaal, Mabu and Bihler press models in stock, as well as decoilers and strip straighteners. Max. pressing force: 80 tons / 800 kN Strokes per minute: 100 – 1000 SPM Main voltage: 40 ...
Max. pressing force: 25 kN Convertible to: 16 kN Max. working stroke: 25.3/60 mm Table size: 150 x 200 mm Diarrhea hole in the table: 15 mm Stroke adjustment: 290 mm Space requirement: 800 x 580 x 650 mm Weight: 51 kg
Table dimensions ( x-y/mm) 2150 x 1200 Slide Dimensions X-Y (mm) 2000 x 1200 Stroke (mm) 300 Slide Adjustment (mm) 200 Stroke per minute 5 - 50 Lateral window dimensions ( x-y/mm) 800
Orma C4 2200×1200 veneer shelf press Shelf length 2200mm Shelf width 1200mm Maximum clearance between shelves 475mm Maximum working pressure 150bar Press on 4 cylinders 1.1kw Hydraulic Pump Motor Shelves heated with CO water Net price
Inv. Num. : 9233 Type: LUD 500/2500-F1 Producer: ZDAS Created: 1975 Parameters: Compressive force: 500 t Maximum stroke rate upper table: 20 1/min Ram stroke: 315 mm Main motor power: 55 kW
Part Number: 7984 SPECIFICATIONS - hydraulic clamping force - round briquette form - briquette diameter 70mm - tank diameter 1000mm - capacity up to 10 briquettes/min, up to approx. 90 kg/h. - automatic operation of the machine - 5.5kW motor - dimensions l/w/h 1800x1200x1500mm - weight approx. 650kg ADVANTAGES – Italian production – used briquetting machine – unpainted – very good condition Net price: 32900 PLN Net price: 7833 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)
NR KATALOGOWY 7926 DANE TECHNICZNE - długość robocza 6200mm - szerokość robocza 150mm - wysokość robocza 1350mm - 12 pionowych siłowników hydraulicznych - wymiary dł/szer/wys 6580/1270/2350mm - waga około 4000kg ATUTY – stan bardzo dobry – prasa używana – niemalowana – przeznaczona do profesjonalnego użytku Cena netto: 69900 PLN Cena netto: 16643 EUR w zależności od ceny 4,20 EUR (Ceny mogą się zmieniać wraz z wyższymi wahaniami)
Italian-built C-frame eccentric press by S. Giacomo srl, Vittorio Veneto. CE certified. Year of manufacture: 1996, serial no. 6759. Rated at 130 metric tons (1,300 kN nominal force) with adjustable stroke 14–200 mm and max 55 strokes/min. Supplied complete with a Festo BV-200-250-C pneumatic feed unit — a heavy-duty pneumatic clamp feeder with 200 mm width and 250 mm max feed length, operating on filtered compressed air at 3–6 bar. Suitable for strip/coil feeding in progressive die and blanking operations. Model: T 130R CE Serial: 6759 Year: 1996 Nominal force: 1,300 kN (130 t) Stroke (adjustable): 14–200 mm Stroke rate: 55 spm max Installed power: 9.25 kW Main voltage: 400 V Air pressure: 5.5–6 bar Weight: 10,000 kg CE certified: Yes Feeder – Festo BV-200-250-C: Type: Pneumatic clamp feed unit Max feed length: 250 mm Max width: 200 mm Operating pressure: 3 ...
MAWEG frame press with automatic adjustment of height and width Press size 4.50 m.x 2.60 m. Frame Press Size: 5.30 x 3.40 x 1.30 m. Immediately available as pick-up in the workshop Top condition ! Still in operation 2026
This SCHAAL SEP 80 (Machine No. 00-1564, built 2000 at A. Schaal GmbH & Co., Salach/Württemberg, Germany) is a precision eccentric press engineered for demanding high-volume stamping work. Built around a vibration-damped O-form double-column cast frame, it delivers the rigidity and dimensional stability required for fine-blanking, progressive die stamping, and high-tolerance production runs where part quality cannot drift across the shift. This press comes equipped with the matched SCHAAL SWV 3E roll feeder, so it's ready to run as a complete coil-fed stamping line out of the gate: Feed length: 0–9,999.9 mm (fully programmable) Strip width: up to 320 mm Strip thickness: 0–4 mm Manufacturer A. Schaal GmbH & Co. Werkzeug- u. Maschinenbau Type SEP 80 Year of manufacture 2000 Machine number 00-1564 CE marking Yes Press force 800 kN Speed: 60 - 320 SPM Adjustable stroke 8–80 ...
T-slot table, High: 2.500 mm, Long: 1.700 mm, Pump: 18 L / mm, Force: 5 TN, Width: 1.000 mm, Voltage: 220/380 V, Neckline: 160 mm, Stem travel: 200 mm, Total power: 4 CV, Piston rod ø of: 70 mm, Surface of the table: 450 x 300 mm, Step between uprights: 200 mm, Maximum working pressure: 70 kg / cm2, Specification: Hydraulics
The Dorst TPA 20/3 is a reliable used powder compaction press known for its robust construction and precise operations. It offers a maximum pressing force of 200 kN and a withdrawal force of up to 100 kN. With a maximum filling height of 140 mm and pressing travel extending to 70 mm, it accommodates a range of powder compaction tasks efficiently. The press is capable of operating at speeds ranging from 5 to 22 strokes per minute, supporting a variety of production needs. It features an upper punch stroke of 200 mm, with an adjustable travel of 160 mm for flexibility across different applications. The machines air supply intake is approximately 160 liters per minute, and it has a connected load of about 15 kW. Constructed with dimensions of around 2000 mm in width, 1700 mm in depth, and 3250 mm in height, the Dorst TPA 20/3 weighs approximately 4,900 kg. It maintains a workplace sound lev ...
Two T-slot tables, High: 2.500mm, Long: 1.700mm, Pump: 18L / mm, Force: 5 TN, Width: 1.000mm, Voltage: 220/380 V, Neckline: 160 mm, Stem travel: 200 mm, Total power: 4 CV, Piston rod ø of: 70 mm, Surface of the table: 450 x 300 mm, Maximum working pressure: 70 kg / cm2, Specification: Hydraulics
clamping force: 250 kN injection volume: 134 cm³ screw diameter: 35 mm platen size: 300 x 300 mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand Clamping unit: - Clamping force: 250 kN - Heating plate dimensions: 300 x 300 mm - Heating power of the plates: 5.3 kW - Clamping/opening stroke: 330 mm - Platen distance with heating plates at maximum: 380 mm - Clamping direction: from below - Side ejector: yes - Stroke of side hydraulic ejector: 100 mm - Ejector stroke/force: 70 mm / 24 kN Injection unit: - Increased injection pressure: 1,580 bar - Maximum injection volume: 134 cm³ - Screw diameter: 35 mm - Screw length: 17.1D - Maximum screw speed: 20–480 rpm - Metering stroke: 140 mm - Injection: from above - Voltage: 3x 400 V, 50 Hz, N, PE Pump drive power: ...
Code: 0419 Brand: ITALPRESSE Model: V/2 Electric press for cold gluing of doors, furniture, panels, composite materials, technical materials, plastics, aluminum, various materials Equipped with a motor that is operated by a switch with automatic return. This switch controls the movements of the mobile platen towards or away from the panels, while the required pressure and the release are controlled by a handwheel, which is on the side of the press. This system allows for maximum pressure with minimum effort Platen dimension mm 2500 x 1200 Opening mm 650 Pressure screw n°2 Installed power Hp 0,75 Overall dimensions: mm 2850 x 1200 x 1650 h Weight kg 880
Hydraulic Press Brake SAGITA BEYELER 200/4000 Slide travel: 150 mm Throat depth: 300 mm Distance between uprights: 3100 mm Motor power: 15 kW Manual Back gear gauge The machine was only used for pre-bending of Hardox sheet Voltage: 380 V Dimensions (L x W x H): 4100 x 1800 x 2700 mm Weight: approx 15 T
clamping force: 800 kN injection volume: 154 cm³ screw diameter: 35 mm platen size: 430 x 660 mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand Clamping unit: - Clamping force: 800 kN - Mould mounting area: 430 x 660 mm - Clamping/opening stroke: 450 mm - Maximum mould installation height without heating plates: 300 mm - Maximum plate spacing without heating plates: 750 mm - Clamping direction: from below - Ejector stroke: 130 mm - Ejector force: 40 kN Injection unit: - Increased injection pressure: 2,180 bar - Maximum injection volume: 154 cm³ - Screw diameter: 35 mm - Screw length: 20D - Maximum screw speed: 20–400 rpm - Metering stroke: 160 mm - Injection: from above - Nozzle stroke: 250 mm - Voltage: 3 × 400 V, 50 Hz, N, PE - Pump drive power: ...
Used screw press for pressing grapes made by Vaslin model CEP 150S . Capacity approx. 750 L. Feed from the destemmer-crusher pump. Plastic feed hopper. Plastic tank. Suitable for all soft fruits as well as, for example, ground apples, etc.
clamping force: 250 kN injection volume: 134 cm³ screw diameter: 35 mm platen size: 300 x 300 mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand Clamping unit: - Clamping force: 250 kN - Heating plate dimensions: 300 x 300 mm - Heating power of the plates: 5.3 kW - Clamping/opening stroke: 330 mm - Platen distance with heating plates at maximum: 380 mm - Clamping direction: from below - Side ejector: yes - Stroke of side hydraulic ejector: 100 mm - Ejector stroke/force: 70 mm / 24 kN Injection unit: - Increased injection pressure: 1,580 bar - Maximum injection volume: 134 cm³ - Screw diameter: 35 mm - Screw length: 17.1D - Maximum screw speed: 20–480 rpm - Metering stroke: 140 mm - Injection: from above - Voltage: 3x 400 V, 50 Hz, N, PE Pump drive power: ...
Four-column press SP 60 / 670 - Achtermann & Co. Stuttgart -Compressive force 60 tons -Passage between the columns 670mm -Passage between the columns/laterally 400mm - Table size 900x750mm -Height clearance 520mm -6x T-slots in the upper beam -6x T-slots in the table Dimensions: LxWxH 2x1.5x2 meters / Weight 3000 kg
clamping force: -- kN injection volume: -- cm³ screw diameter: -- mm platen size: -- mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand, used as a spare parts source for cannibalising 3x machines, model SAD 114/30 - Year of manufacture: 1999 - Problems with the control system 1x machine, model Super AD 76/15 - Year of manufacture: 2006 - Problems with the control system There are 3 machines built in 1999 and 1 machine built in 2006 available. The price is per unit. If you purchase several units a package price can be arranged. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Heavy-duty frame Adaptive follow-up support High precision pneumatic chuck Optional 3D bevel cutting Suitable Industries Tube furniture, fitness equipment, automotive exhaust, agricultural machinery, pipe distribution, guardrails & scaffolding. Gujdoza Rm Hspv Hcqcjc Application Scenarios Round/square tube cutting; holes, slots, arcs; short-run & mass pipe production.
PANHANS 116 YOC 1986 Motor power: 1.5 kW 2-lever operation Max. drilling depth: 130 mm Height adjustment: 135 mm Max. slotted hole length: 240 mm Height adjustment by handwheel Dowel pitch: 16 / 22 / 25 / 32 mm Miter ruler (adjustable) Workpiece stop 1 eccentr. Workpiece clamp Line laser (Z-laser) 230V Chassis Table size: 510 x 290 mm Weight: 220 kg incl. various Gebr. Drills Dimensions (approx. dimensions): W: 90 cm T: 125 cm H: 115 cm Manufacturer information
Key data: 40 t, 1280 mm, 900 mm
Spotting and Experimental Injection Press REIS TUS 90 OK-40T Year of construction 1975 40 t pressing force Clamping surface 900 × 1280 mm Stroke 1150 mm Tool weight up to 7 t Movable ejector Hydraulic motor 5.5 or 7.5 kW Machine weight approx. 7 t
: 150 t : 3100 mm : 2600 mm : 400 mm : 200 mm : 600 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 120 kN
Mohrtek injection press, vertical loadable, horizontal pressing machine. please contact for more information
Offer 25418 Technical data: - Printing capacity approx. 110 kN - Working stroke approx. 50 mm - Power stroke 12 mm - Projection approx. 150 mm - Table size 280 x 180 mm - Installation height adjustment up to max. 300 mm - 2 Hand control - Air inlet 6 - 8 bar - Total - space requirement approx. W 600 x H 2500 x D 900 mm - Weight approx. 400 kg
clamping force: 350 kN injection volume: 170 cm³ screw diameter: 36 mm platen size: 380 x 300 mm Condition: second-hand, Specification: C-frame injection moulding machine - second-hand Clamping unit: - Clamping force: 350 kN - Platen size: 380 x 300 mm - Heating power of the plates: 6 kW - Clamping/opening stroke: 200 mm - Clearance between the plates: 250 mm - Clamping direction: from below Injection unit: - Pressure: 1,050 kg/cm² - Maximum injection volume: 134 cm³ - Screw diameter: 35 mm - Max. screw speed: 30–110 rpm - Metering stroke: 165 mm - Injection: from above - Voltage: 3 × 400 V, 50 Hz, N, PE - Pump drive power: 11 kW - Hydraulic motor power: 10 kW - Dimensions LxWxH: 2,400 x 1,200 x 3,300 mm - Weight approx.: 3,000 kg The data for this ad was created with ModulMWS - the ...
The dimensions of the machine are LxWxH 2500mm x 1600mm x 2500mm. The weight is 8250kg. The machine is in a little-used condition.
maximum number of results exceeded
please refine your search
