forging presses used for sale

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

Nominal force 1250 ton - first stage : 260 tons, - second stage : 800 tons, - third stage : 1250 tons, Slide stroke 1250 mm Distance between table and slide 2650 mm Main cylinder dia Ø 500mm Return cylinder dia. ( two) 2xØ400mm Distance between column 1800mm Table size width / length 1250 / 3150 mm Main motor power 150 kW Machine dimensions L x W x H 16950 x 12100 x 11410 mm Weight 265000 kg Forging manipulator FS2ЕТС -2T also available 1T and 700t

pressure: 1645 t stroke: 1000 mm dayligth: 3000 mm Control: down speed: 280 mm/sec return speed: 275/346 mm/sec distance between columns: 2520 mm total power requirement: kW weight of the machine ca.: t the machine is in very good condition optional you can buy a shifting table as well The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

for production of forgings by forging of ferrous, non-ferrous metals and alloys in the hammer dies model M212 Impact energy, 50 kJ Nominal weight of falling parts, kg 2000 Stroke woman, mm 1200 Stroke woman, mm 1200 Machine dimensions Length Width Height (mm) 3650X1660X5310 Weight kg 58.310, spare parts available

Complete Mechanical Upgrade by GFM, with increase of Power to 900 Ton/hammer and new CNC in 1991 Numbers ̈of Hammers: 4 Forging force: 3.600 Ton (900t per hammer) Strokes per minute: 270 Maximum diameter of forging: - circular cross section: Ø 400 mm - square cross section: 320 mm Minimum output diameter: - circular: 60 mm - square: approx 50 mm Maximum length of forging with/without lateral reception: 8.000 mm / 9.700 mm Feed of manipulator A: 7.140 mm Feed of manipulator B: 9.940 mm Workpìece weight: 2500 kg Total power supply (nominal power): ca 1.600 kW Machine weight: 493.000 kg

Key data: 150 kg, 480 mm, 375 mm

Hammer weight: 150 kg Stroke length: 480 mm Stroke rate: 168 p/min. Projection: 375 mm Plunger diameter: 180 mm Origin: England Motor power: 11 kW Machine LxWxH: 200 x 180 x 240 cm Machine Weight: 6000 kg

Capacity: 1600 tons Slide stroke: 300 mm Slide stroke length at maximum force: 0,16 mm Distance adjustment between tableand slider: 10 mm Slide stroke number in 1 min: 75 Length of a rod: 920 mm The closed height: 660 mm Table overall dimensions: 940x1200 mm Table height above floor level: 450 mm Slide overall dimensions: 860x910 mm The size of lateral windows: -Height: 560 E5931468 mm -Width: 600 mm Main motor: 110 kW Press overall dimensions: -Length: 5060 mm -Width: 3940 mm -Height above floor level: 5125 mm Press weight: 120 tons

Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm Dimensions: -Left-to-right: 3940 mm -Front-to-back: 1430 mm Height above floor level: 3260 mm Weight: -With an anvil-block: 25600 kg -Without an anvil-block: 16600 kg

Offer 25443 Specifications: - Bear weight 40 kg - Impact regulation - Lifting height infinitely adjustable 200 mm - Impact rate approx. 220 1/min - Projection 280 mm - Anvil - height approx. 560 mm - Anvil - Weight 250 kg - Drive 380 V / 4 kW - Space requirement approx. W 850 x H 1100 x D 1350 mm - Weight approx. 850 kg

400 Ton Hydromec HF4000 Non-Ferrous Hot Forging Press Line MANUFACTURER – HYDROMEC YEAR – 2000 SERIAL NUMBER – 660 MODEL – HF4000 C/D MATERIAL – NON-FERROUS TONNAGE – 400 TON (4000 KN) STROKE – 380MM STROKE PER MINUTE (CONTINUOUS) – 22-35 STROKE PER MINUTE (SINGLE STROKE) – 22-45 RAM ADJUSTMENT RANGE – 100MM CLEARANCE (STROKE TO BOTTOM, ADJUSTMENT TO TOP) – 865MM SIZE OF TOOL MOUNTING PLATE – 1000MM X 1000MM MAIN PRESS MOTOR – 59 KW MAIN MOTOR RAM ADJUSTMENT – 2.2 KW CUSHION FORCE – 70 TON (700 KN) CUSHION STROKE – 40 – 110MM INCLUDES: AUTOMATED PICK AND PLACE ROBOT FULLY AUTOMATED SLUG LOADING STATION WITH FURNACE/CONVEYANCE MAESTRI C.T. 3500 4 TRACKS SLUG FURNACE (NEW 2000) , 420 KW POWER. NATURAL GAS, 950 DEGREES CELCIUS ELECTRICS PRESS CONTROLS VIRTUAL WALK Combination Lot of the following: Lot No. O233 MAESTRI Gas  ...

Air steam die forging hammer : Capacity : 16 tons, Nominal mass of drop parts : 16000 kg, Impact energy : 400 KJ, Ram stroke : 1500 mm, Ram stroke per minute : 20, Distance clear between guides : 1180 mm, Ram dimensions front to back : 1500 mm, Die holder dimensions front to back : 1600 mm, Bottom die impression to floor distance : 500 mm, Steam/air pressure : 0.7-0.9 MPa, Overal dimensions : - Floor space : 4500 x 2450 mm, - Height above floor level : 7920 mm, Mass of anvil block : 325 tons, Total weight of hammer : 425 tons.

Capacity: 1600 tons Slide stroke: 300 mm Slide stroke length at maximum force: 0,16 mm Distance adjustment between table and slider: 10 mm Slide stroke number in 1 min: 75 Length of a rod: 920 mm The closed height: 660 mm Table overall dimensions: 940x1200 mm Table height above floor level: 450 mm Slide overall dimensions: 860x910 mm The size of lateral windows: -Height: 560 mm -Width: 600 mm Main motor: 110 kW Press overall dimensions: -Length: 5060 mm -Width: 3940 mm -Height above floor level: 5125 mm Press weight: 120 tons

Capacity 7.25T /16000lbs Stroke 1727 mm weight 270t

Capacity 5.4T /12000 lbs Stroke 1626 mm weight 150t

Capacity 2.7T /6000 lbs. Stroke 1403 mm weight 77.5t

nominal force:2500 t stroke:600 mm cycle time:13 - 18 s distance between columns:1720 mm Distance table/ram, max. stroke up, adjustment up:2600 mm table surface area:1720 x 1800 mm allowed max. force:4000 t blow die to die:5000 t ram surface:2100 x 1320 mm capacity of ejector in table:40 t ejector stroke in table:250 mm ejector surface area in table:900 x 820 mm capacity of ejector in ram:6 t ejector stroke in ram:40 mm spindle diameter:425 mm power requirement:900,0 kW weight:335,0 t Dimensions (WxDxH):3,4 x 4,6 x 9,7 m height over floor:8,3 m fully-automated forging line:to produce axle shaft

impact energy:207951 mkg ram hammer stroke:660 mm no. of strokes:100 /min impact energy:2040 kJ distance lower die block / ram gudeway:660 mm Throat:750 mm steel forging - rectangular up to:240 mm steel forging - diameter up to:270 mm power requirement:75,0 kW weight of hammer:16,5 t weight of anvil:15,5 t ram hammer weight:750 kg weight:32,0 t dimensions (WxDxH):3,2 x 1,45 x 3,45 m Mode of operation:pneumatisch

We can offer you all types of Wafios nail machines from S25 - N90

We can offer you all types of Wafios nail machines from S25 - N90

Force of pressure: 63 t table size: 610 x 800 mm throat depth: 350 mm stroke: 200 mm Electr. Supply: 380 V, 15 kW space: 1800 x 920 x 2440 mm weight: 3940 kg

Automatic baler Manufacturer: PRESTO / Kampwerth Type: HPK 20/40 Built in 1996 technical data: pressing force: 40 t Specific pressing force. 765 kN/m2 Power: 15 kW Volume performance in idle: 57 m³/h Volume performance based on the bulk weight -35 kg/m3 (Department store) 47 m3/h -60 kg/m3 (mixed goods) 42 m3/h -100 kg/m3 (collective goods) 37 m3/h Weight capacity based on bulk weight -35 kg/m3 (Department store) 1.6 t / h -60 kg/m3 (mixed goods) 2.5 t / h -100 kg/m3 (collective goods) 3.7 t / h bale weight up to 400 kg depending on the material and Bale length electrical connection 400 V, 50 Hz 30 filler opening: 1200 x 700 mm binding: 3 x vertical channel size: 700 x 750 mm (H x W) bale size: 700 x 750 x length in mm machine weight: 6,500 kg optional with presses infeed conveyor

Stock number: UG5830 Used chamber filter press by FILTRI DIEMME model GIGANTE 1500. Frame type 1500 mm x 1500 mm /90. Press has 85 pp plates with bottom feeding inlet. Filtration surface about 321 m2. Press is equipped with control panel, Willet sludge pump designed for work on pressure 10 bar, polymer dosing system, cake washing system, photocell safety system. Plates designed for work on pressure up to 15 bar. Closing pressure 385 bar. Dimensions: length 10 m x width 2 m x height 2 m. Reported output up to 30 m3 of sludge per hour.

with rotary tower for sieve-edge presses (except EBP350) For cleaning and grinding fruit. The pre-washing system is an absolute must for the hygienic processing of fruit. Thanks to the built-in ratz mill with interchangeable sieves, you get the ideal mash consistency for the respective pressing method. Technical data: Rated power up to 6 000 kg/h Power: Elevator 2.2 (3.0) kW (PS) Mill 5.5 (7.5) kW (PS) Electrical connection 400V 50Hz (3 phases) Electrical protection 16 A Dimensions: Length 1 750 mm Width 870 mm Height 2 700 mm Delivery or insertion height 800 mm Weight 420 / 450 kg Material 1.4301 / AISI 304 Connections: Connection for cleaning 1/2" inside Connection for washing container 2" outside Height mash ejection 1 730 mm / with transition 1 510 mm can be used for core fruit Scope of delivery 7, 9 and 12 mm cutting sieve

Force of pressure: 75 t projection: 300 mm table size: 620 x 800 mm Durchfalloch in the table: 225 x 325 mm table adjustment: 175 mm plunger surface: 180 x 475 mm slide adjustment: 80 mm stroke adjustment: 16-140 mm stroke rate: 90 / min drive motor: 380 V, 3 kW space: 1700 x 1200 x 2500 mm weight: 3300 kg

Capacity: 50 ton Projection: 225 mm Stroke: 320 p/min Large table: 500 x 800 mm

; in order

Pressing force: 40 t table size: 670 x 470 mm plunger surface: 670 x 470 mm clearance between the pillars: 620/470 mm gr. Height: 740 mm Preß speed: 20 mm / s rapid traverse: 50 mm ejector force: 3T Electr. Supply: 380 V, 9.5 kW space: 2200 x 1875 x 3000 mm weight: 2400 kg

Pneumatic press 2643 Assembly through pivot table outside the working area With protective cage and release only with a retracted swing table Table size: 10 cm x 10 cm

REX - TORWEGGE - HOMAG- BARGSTED - KALFASS - HOMS-410-K core layer production plant (also solid wood boards) Consisting of feeding roller, Package cross-cut saw HOLTEC's 121-SHKA,. more feed roller TRANSA, Rotary scissors type lift roller Solid wood loading portal, Loading system KALFA for planing machine REX, REX planing machine HOMS-410-K built in 2004. with RIP saw unit. Central RIP saw unit, upper and lower drum, Much sheet saw unit, Belt conveyor system 8 manual workstations circular saws, 12 x material import System. 12 x glue system. Glue press TORWEGGE Working length approx. 6600 mm,. 2 cross cutting, 8-speed The stack and cooling system, Stacking line, Conveyor roller conveyor Power 2500 sqm / 7 hours PLATTENAUSBESSERUNGS AND ROLL FORMING LINE BARGSTEDT/HOMAG Plattenausbesserungs line Doppelendprofilier line in TOP condition! Workpiece parameters of ...

Force of pressure: 30 to piston stroke: 150 mm table width: 185 mm passage (S): 530 mm bore (F): distance of 140 mm cylinders - table (F1): distance 150 mm cylinder - table (F2): 1030 mm cylinder movable (M): 200 mm width (A): (B depth of 800 mm): 700 mm height 1 (C): 1775 mm height 2 (D): 1805 mm weight: 162 kg

Pneumatic press with foot-tripping

Eccentric C stand press, little used C frame - eccentric press, used Type: PED 63.3 S4 manufacturer: WMW Year of construction: 1994 Pressing power / rated pressure: 63 t Sheet thickness / material thickn. 3.2 mm Table size / surface of bed: 800 x 580 mm Hole in the table / hole in table: 300 mm diameter. Stroke / stroke of slide: 8... 120 mm Number / number of strokes: 56 / 90 / min Tappet adjustment / adjustment of slide: 70 mm The maximum distance between Table and plunger / max distance between table and slide: 560 m Projection / Cap: mm Power of main motor / power of main motor: 6 kW Weight / weight: 5.5 t

The CNC press brake SMD PBH 110-3100-4C produced in 2006 is offered in a set with the ANTIL TWISTER F5 robot. Technical parameters : - manufacturer: SMD - type: PBH 110-3100-4C - year of production: 2006 - control: CNC CYBELEC ModEva 10 - overworked time: about 20,000 man-hours - pressure force: 110 tons - bending width: 3100 mm - maximum working speed: 10 mm / s - table width: 60 mm - table height: 960 mm - stroke: 465 mm - frame spacing: 2600 mm - throat: 410 mm - power supply: electric - 11.5 KW, 400 V three phases - oil tank capacity: 250 l - dimensions of the press: 3960 × 2045 × 3650 mm - total weight: 9500 kg Processing on a 3 m table and palletizing of finished details on 3 europallets.

Force of pressure: 50T piston stroke: 200 mm table width: 260 mm passage (S): 730 mm bore (F): distance 205 mm cylinder - table (F1): distance 75 mm cylinder - table (F2): 1050 mm cylinder movable (M): 240 mm width (A): 1040 mm depth (B): 800 mm height 1 (C): 1835 mm height 2 (D): 1880 mm weight approx.: 287 kg

Ironing Pressing Line composed by In feeding Belt System Hot Press Cold Press Out Feeding Belt System

Maximum force: 1600 tons Slider stroke length: 400 mm Unattainable-course: 12 mm Number of courses of a slider per minute: 16 Number of single turn-on: 12 The closed height: 870 mm Adjustment: 220 mm Under-forginig plate: -From left to right: 1600 mm -From front to rear: 1600 mm -Thickness: 650 mm Slider overall dimensions: 1600x1600 mm Aperture in a table: 1000x1000 mm window dimensions in cheeks: 1650x1650 mm Course of a rigid pusher in a slider: 100 mm Force of a rigid pusher in a slider ton-force: 80 Main electric motor power: 110 kW Course of pneumatic pillow: 160 mm Force of pushing out of a pneumatic pillow ton-force: 71 Hydropneumatic pillow: -Working course: 250 mm -Force of pushing out ton-force: 25 -Force of a clip ton-force: 250 Press overall dimensions: 4670x4670x8110 mm Press weight: 140 tons

Press Type: Twin Cavities Mold Type: Segmented Type of Tires: Passenger and Light Trucks Bead Diameter Range: 16â â 20â Closing force: 650,000 Lbs / 3680 KN Heating System: Steam Bladder System: Hydraulic Water Max. Pressure: 20 Bar Power Supply: 18.5 KW, 380 V / 50 Hz Loader: Available Controls: Simatic S7

With the universal hand punch NPR-20 can both on the front page as also Center of the punch be punched, so may here A4 sheet at any point are processed. The punch is suitable for cutting of printed materials in the Office, in the printer or in the copy shop. With a Nutmesser can A4 sheets are grooved. The NPR-20 is suitable for all cutting work, which can be with the NPR-10 through out. A countertop if necessary Additionally facilitates the stamping work

DECKLAGEN PRODUCTION LINE TORWEGGE with WEINIG H22BL FINSIH LAYER PRODUCTION LINE ML-Presseen Torwegge Heating bed length 3 m Wood types FI, AI, LÄ, DG, ZI ML slat width 60 - 140 mm ML- Slat thickness 8 - 15 mm Rod width 25-45 Rod thickness 17-31 mm Possible. Carpet widths 1273 - 2073 mm Special widths 1000, 1700 mm Target capacity/layer 300 m2 LH 500 m2 19 - 31 mm Fi Functional principle continuous Plate length mm 10000 Plate width mm 6600 Workpiece thickness max mm 45 Pressing force t 10 Further technical data Workpiece thickness min mm 25 Input length min mm 450 Fugue glue press Yes The technical data are partly estimated. Actual values can be may differ. = English = Technical data are partially estimated. Actual values may ... WEINIG High Performance Profile Machine, Type Hydromat 22 BL Built in 1995 with splitting unit (lamella saw) Bring (au ...

Properties: + Semi-automatic + very good value for money + already as standard: mobile machine, optimal for quick ground wiping + Stainless steel partial knife + coated knife head + even division of the dough + excellent round inges, the dough pieces + ergonomic knife cleaning position (head swivelable 90 degrees forward) + easy and fast adjustment of the chamber height + side bracket for actuator, immediately at hand SERIES equipment: + 3 impact plates included SPECIAL accessories, available at an extra cost: - additional impact plates for DivObun Size 4-30: EUR 93,-- net / Pcs

Edge press of PanHans 923 with preheating ruler Working length 250 cm maximum 80 mm thick L x W x H: 300 x 60 x 100 cm Weight approx. 300 kg Built in 1976 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

automatic baling press Manufacturer: Avermann Type: AVOS 1810-5-74/100 Built: 2011 Engine hours: approx. 13,685 h technical data: Pressing force: 100 t Operating pressure 320 bar Filling opening: 1,800 x 1,000 mm Channel format: 1,100 x 700 (W x H) Drive power: 1 x 45 kW + 1 x 30 kW, Total connection power: 105 kW, Hedging: 200 A fully automatic binding 5-fold vertically, Throughput: at 30 kg/m3: approx. 9.0 t/hour at 50 kg/m3: approx. 13.0 t/hour at 100 kg/m3: approx. 20.0 t/hour Bale weights up to approx. 800 kg Oil tank volume: approx. 2,000 Ltr. Transport dimensions: approx. 11,200 x 2,355 x 2,700 mm Machine weight: approx. 23.0 t Machine will be dismantled in January 2021. Subject to errors in the technical data!

FRICTION BELT FOR SCREW PRESS DIRECT FROM THE MANUFACTURER! Description: -Chrome leather friction belt for screw presses, riveted, new! -Dimensions: 530 mm i. diameter x 50 mm high x 18 mm thick ON request make we the friction belts regarding to your sizes! For all machine types like SMS Hasenclever Berrenberg, Schuler, Weingarten, Vaccari, via, Mecolpress, Osterwalder... We deliver worldwide! We confirm best service and short delivery times.

automatic baling press Manufacturer: PAAL Type: KONTI 275 F Built: 2007 Main parts of the press: 1 automatic duct press (without wire winding devices) 1 automatic lacing 1 Hydraulic system 1 Electric control technical data: Pressing force: 800 kN / 80 t at 300 bar Specific pressing force: 9.70 kg/cm2 Channel cross-section (h x w): 750 x 1,100 mm Filling opening: 1,020 x 1,600mm Number of connecting wires: 4 pieces vertically Drive power: Main pump: 1 x 45 kW Pump delivery capacity: 1 x 380 l/min Throughput: up to approx. 280 m3/h under operating conditions Performance at: - 35 kg/m3 bulk weight: approx. 9.5 t/h - 60 kg/m3 bulk weight: approx. 16.5 t/h - 100 kg/m3 bulk weight: approx. 26.0 t/h Hydraulic oil tank volume: 2,100 l Operating voltage: 3 x 400 VAC / 50 Hz / N / PE Other equipment: Operator Panel MP 270 auto ...

Stock# U2347-12 Used hydraulic press for removing paste/paint from mixing can. Press consist of carbon steel supporting column with height 399 cm mounted to base with dimensions 700 mm x 700 mm. Pressing head is mounted on cart which is rised and lowered by mechanical hoist which is driven by el. motor 0.37/1.5 kW, 380 V, 50 hz and is able to work up to weight range 2000 kg. Pressing head is designed for work on mixing cans with internal diamater 1100 mm. Top of pressing head is equipped with 6 clamps for mounting it on product container. Stroke of piston about 1150 mm. Piston is poweder from hydraulic device, driven by el motor 0.55 kW. Maximal working pressure up to 150 bar. Last time used in paint industry.

FRICTION BELT DIRECT FROM THE MANUFACTURER! Description: -Chrome leather friction belt for screw press, riveted, new! -Dimensions: 530 mm i.diameter x 50 mm high x 18 mm thick ON request make we the friction belts regarding to your sizes! For all machine types like SMS Hasenclever Berrenberg, Schuler, Weingarten, Vaccari, via, Mecolpress, Osterwalder... We deliver worldwide!

Schuler PE4s 50/800 High Speed Press Manufacturer: Schuler Type: PE4s 50/800 High-speed press 61/21 600/3 Pressing force: 50 t Projection: 800 mm Stroke rate /min: 125-300 Plunger stroke: 40 mm Kohler unwinding reel 500.1 M We sell a large number of paternosters. The devices are in operation until 30.06.2021. After the purchase, there are also the documents for it From 01.07.21 the devices are ready for collection. Dismantling and transport by the buyer. Location is Hildesheim The dismantling, loading, as well as transport can alternatively be offered by us. In addition to about 50 paternosters, countless other machines are available. After purchase, the amount is due within 7 working days. Please also note our other offers. Have fun browsing and buying.

Slot boring machine Scheer L x W x H: 70 x 60 x 140 cm Weight approx. 400 kg Built in 1975 The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Multi-chamber press C400 | C600 | C800 C400 (with two pressing chambers) C600 (with three pressing chambers) C800 (with four pressing chambers) Specifications: Motor 1,5kW Electronic voltage 230V/50Hz/1-F. Maximum pressing force 6.5t Working pressure 150bar Cylinder stroke 700mm Time press cycle 50s Press chamber (LxWxH) 730x600x830mm Insertion height 1060mm Insertion opening (LxW) 730x600mm package size (LxWxH) 730x600x400mm Package weight 30-40kg Binding rolls 8x6x4x Strap type (polyester) 9mm/250m Number of containers 4x3x2x Length ges. 3455m; 2615mm; 1775mm; 17775mm Width ges. 1050mm Height ges. 1955mm Weight ges. 1955mm Weight ges. 1090kg; 880kg; 670kg; 510kg Transport dimensions C400 !x container Length 1680 mm 840 mm Width 845 mm 845 mm Height 1955 mm 1060 mm Weight ges. 210 kg Multi-chamber press C400 (with two pressing chambers) C600 ( ...