forging presses used for sale

Inv. Num. : 8585 Type: KPRW 160 Producer: Kieserling Created: 1972 Parameters: Compressive force: 160 t

Offer 25247 Specifications: - Max. pressing force 50 t - Max. ram stroke approx. 260 mm - Lifting speed fast approx. 1540 mm/min - Lifting speed slowly approx. 210 mm/min - Stand width approx. 770 mm - Stand depth approx. 195 mm - Min. / max. installation height approx. 200 / 1100 mm - Table height-adjustable with 5 plug-in bolt grids each approx. 180 mm - Support plate approx. 450 x 450 mm - Height adjustment of the table with hand crank cable - Drive 400 V / 1.5 kW - Space requirement approx. W 1750 x H 2100 x D 850 mm - Weight approx. 600 kg

Complete wood pellet production line up to 2000kg/h. Currently still connected, can be launched, tested. Sold for dismantling. The entire line - from automatic sawdust feeding to semi-automatic packaging in PE bags or big bags. The line is equipped with a sawdust moisture flow meter (German) that constantly measures sawdust moisture after drying, making it much easier for the operator to regulate the drying process. 2-3 workers worked per shift. Granulator - 2x55kW motors, matrix diameter 450mm.

Key data: 5 t, 150 mm

Hydraulic Press Atsugi AP-5-KL Used Load Range: 20-50 (kN) Stroke (mm): 150 Lower Speed ​​(Approach Fast Speed: 350 (mm/s) Lower Speed ​​(Under Pressure Slow Speed: 36mm/s Rise Speed ​​250 (mm/s) Working Area Open Height: 250mm Open Depth: 180mm Table Size: 450x50mm Motor Specification 3 Phase AC200V 4P 1.5KW Two-Hand Operation . Mobile Worktable Fuel Oil / Quantity Daphni Hydraulic 46/9L Total Weight (kg) 270 Body Size ​ Height (mm) 986 Width (mm) 485 Depth (mm) 920

Brother Hi-Spin riveting machine 5mm high spin Type: BR1-103 - Crimping ability (Mild steel rivet) φ5mm or less - Spinning head: 20-40mm - Distance between tabletop and punch: 60-180mm - Table working surface size: 310 x 180mm - Processing time setting range: 0.3-5 seconds - Normal pressure: (Varies depending on pressing conditions) 2-5kg/cm2 Air consumption: Power supply and motor Three-phase 200V 0.2kw 4Pole Machine size Width 390 x depth 510 x height 1000mm Machine weight 95kg

Yoshikawa US-66 riveting machine 5mm high spin type: US 66 - Crimping ability (Mild steel rivet) φ5 mm or less - Spinning head: 5-40 mm - Distance between tabletop and punch: 90-285 mm - Table working surface size: 250x250 mm - Processing time setting range: 0.2-9 seconds - Normal pressure: (Varies depending on pressing conditions) 2-5 kg/cm2 Air consumption: Power supply and motor Three-phase 200V 0.12kw Machine size Width 330 x depth 610 x height 800mm Machine weight 95 kg

Engel Injection Machine Type ES 1500T/160 V – ELAST Stroke slide plate 300mm Stroke central ejector for slide plate 100mm Force central ejector for slide plate 30kN Stroke lateral mechanical ejector 250mm Stroke lateral hydraulic ejector 250mm Force lateral hydraulic ejector 80kN Stroke central ejector 120mm Force central ejector 20kN Pump drive power 15kW Oil filling 1 225 Operating pressure of hydraulic system 250bar Capacity temperature control unit 2x3 kW Total connected load 48kW Dims: 2675mm long x 1350mm wide x 3310mm high Weight: 6900 With instruction manual

Eccentric press LEK 160

Inv. Num. : 8630 Type: EHP 50 Producer: Darley Created: 1997 Parameters: Control system: DELEM Compressive force: 50 t Maximum bending length: 2000 mm Machine weight: 2600 kg

Press brake with Stäubli robot cell press Manufacturer: LA G Model: GBS R 1250 50 The machine was only used for a very short period of time.

Hand lever press partly with pneumatic cylinder Note: The operating hours are unknown. The entry 99999 hours is only pro forma and does not correspond to the actual hours

The Dorst TPA 50/4 is a reliable, used mechanical powder compaction press designed for precision and efficiency. Offering a robust maximum pressing force of 500 kN and a maximum withdrawal force of 400 kN, it supports a variety of powder compaction tasks. With a filling height up to 180 mm and a pressing stroke of up to 90 mm, this machine is adaptable to diverse requirements. Equipped with an upper punch stroke of 120 mm and an adjustable travel of 220 mm, the Dorst TPA 50/4 provides flexibility for different applications. It operates at a speed of 7 to 32 strokes per minute, ensuring efficient production. The press requires a compressed air supply, consuming approximately 200 liters per minute, with a total connected load of around 18 kW. Constructed with durability in mind, the press measures approximately 2000 mm in width, 1700 mm in depth, and 3250 mm in height, and weighs around 5, ...

The Dorst TPA 50/2 is a used mechanical powder compaction press engineered for precision and efficiency, making it suitable for demanding industry applications. With a maximum pressing force of 500 kN and a maximum withdrawal force of 400 kN, this machine is robust and reliable. This model press allows you a maximum filling height of 180 mm and a pressing travel of up to 90 mm. Designed for versatility, it features an upper punch stroke of 120 mm and an adjustable travel of 220 mm, operating at speeds ranging from 7 to 32 strokes per minute. It requires a compressed air supply with an intake of approximately 200 liters per minute and has a total connected load of around 18 kW. The construction is sturdy and occupies a footprint with dimensions of approximately 2000 mm in width, 1700 mm in depth, and 3250 mm in height, weighing approximately 5,500 kg. The press operates at a workplace-rel ...

The Dorst TPA 5 is a refurbished mechanical powder compaction press, designed for precision and efficiency in industrial applications. It offers powerful performance with a maximum pressing force of 50 kN and a withdrawal force of up to 40 kN. This makes it suitable for a variety of powder compaction tasks, with a filling height of 50 mm and pressing travel capability of 25 mm. This machine provides flexibility with an upper punch stroke of 85 mm and an adjustable travel span of 70 mm, operating at 6 to 30 strokes per minute. It consumes around 50 liters of compressed air per minute and has a total electrical load of approximately 4.00 kW. With durable construction, the Dorst TPA 5 maintains a quiet operation at a sound level of 70 dB(A). The presss compact dimensions, approximately 1200 mm in both width and depth and a height of 2150 mm, with a weight of about 1,200 kg, make it a manage ...

Inv. Num. : 8643 Type: LEK 250 Producer: ZTS Generated: GO Parameters: Compressive force: 250 t

Briquetting press type GP 120 Tandem Briquetting press for briquetting chips, wood chips and dusts incl. autom. Level detector - Briquette diameter: 60 mm - Pressing capacity: 40 - 120 kg/h 2 = 80 - 240 kg/h (depending on material) - Hopper opening: approx. 1,900 x 1,900 mm - Hopper height: approx. 1,800 mm - Hopper capacity: approx. 6.0 m³ - Drive power: 7.5 kW, 400 V, 50 Hz - Control cabinet: available on both sides - Operating hours: 13,725 h or 13,005 h - Hydraulic power unit: approx. 300 l tank for hydraulic oil - Weight: approx. 1,100 kg 2 = 2,200 kg Used briquetting press in good condition W-pliers cylinder, pliers (RB 120 reinforced), pliers connection flange renewed on one side (left in the direction of conveyance) briquetting | Briquette Press | Briquetting Presses | Briquette Press | Briquetting # Briquetting press type GP 120 Tandem Briquetting ...

Key data: 250 t

Inv. Num. : 8652 Type: ZHS 250 Producer: ŽDB Hydraulika Generated: 2000 Parameters: Compressive force: 250 t Table length: 3500 mm Table width: 1200 mm Stroke: 700 mm Ram dimensions: 3500 x 1200 mm Working speed: 13-60 mm/s Machine height: 6000 mm Machine length: 3000 mm Machine width: 5000 mm Machine weight: 60000 kg

Single Column Press Dunkes TYPE: HZS 160 Specifications: Manufacturer: Dunkes Model: HZS 160 Operating hours: approx. 2250 The machine is in good condition and fully functional.

I am selling this machine. It can be tested when connected. The machine is located in the Czech Republic. Very good condition. Price includes dismantling and loading. Rated deformation force 400 t Working area of table 3100 x 6000 mm Max. ram stroke 1000 mm Clearance between columns 3100 mm Output of main motor 15 kW Height of the machine 4170 mm Widht of the machine 4150 mm Lenght of the machine 6000 mm Weight of the machine 44190 kg

PNEUMATIC TRANSFER PRESSES - HEAT PRESS FOR T-SHIRT PRINTING – INTRON COPY PRESS 300 220 070 Sr. No.: 9304 0392 Equipment / Additional information: Professional shirt / cardboard and press for various things that need printing

Inv. Num. : 8718 Type: LDC 250 Producer: SMERAL Created: 1987 Parameters: Compressive force: 245 t Maximum stroke rate upper table: 38 1/min Adjusting the ram: 120 mm Ram stroke: 200 mm Machine weight: 29800 kg

gebr. Post-bending press Fabr. Graebener, Type GRNM, YOC 2005 max. bending force 16 t. Tool length 1,600 mm Adjustment of the underswing, hydraulic 2 cylinders Dimensions 5080 x 3290 x 2540 mm Kj Uovvlllerhyxkenb Weight 65 t.

We would have all these machines as a package for sale. 1x Press brake 160to 3m 1x Press brake 60to 2m 1x KRC 150 robot 1x welding robot cell with Kuka robot and Fronius TPS4000 1x Micron

Book press Tränklein ZP 39 Combi; cleaned and tested; Format per press plate 322x440mm; Insertion height 400mm; Pressing force 5t. Book press Tränklein ZP 39 Combi; cleaned and checked; size per pressing plate 320x440mm; hight 400mm; press capacity 5t.

Rep M46 Injection Moulding Machine Size of platens 430x430mm Injection unit short volume 670cm3 Injection pressure 1690 bar Injection force 331kN

Key data: 100 t

Sale due to switch to eccentric press Pressing force 100 tons Loading depth 360 mm Stroke 500 mm Daylight 800 mm Plunger area 530 x 400 mm Table height above floor 710 mm Working speed 10mm/sec Approach speed 150 mm/sec Return speed 150 mm/sec Required power 17 kW Dimensions L x W x H 1,400 x 2,000 x 3,200 mm Weight of the machine approx. 5.1 t Year of manufacture 2001 Price is net, VAT can be claimed. Loading facilities available All information without guarantee

Manufacturer: Ebu Model: STA 200/2000 Year of Manufacture: 2005 Overhaul: 2016 ( is currently equipped with a longitudinal transfer and has run very little since the overhaul) Punching force: 200 tons Installation space: 2000+800 Ram stroke: 16–160 Plunger adjustment: 0–120 mm Advance max.: 9999.9 Max. bandwidth: 300 Speed range: 30–150 Find more here - / Contact us at -

Knuckle Joint Press Kieserling 2000 ton yeer

Manufacturer: LEINHAAS Model: AR11-160 RH 1 Year of Manufacture: 1991 Mains voltage: 3x400V / PEN / 50Hz Control voltages: 220V AC 50Hz / 24V DC Press connected load: 44 kW Total connected load: 55 kW Machine operating hours: 62,212.3 h Machine type: differential travel press Press force: 1300 kN Additional equipment : The strip feed system can also be purchased separately - Strip feed system from ALBA (Includes coiler, straightener, and roller feed) Find more here - / Contact us at -

Bread Roll Press Fortuna Automatic A 3 H+ Dough dividing and rounding machine TOP model with effective shutdown Head cleaning to the back Dividing head with stainless steel knife NEW Dough insert up to 2400g Connection 400V, 16A-CEE connector Used machine overhauled with warranty Quality from a specialist company! Benefit from over 35 years of experience! Option: Platform or chassis Wirkteller Neu Service Package Maintenance contract E-Box Instruction & Commissioning

Key data: 630 t, 275 mm

For sale is a used lowering press, manufacturer Sack + Kiesselbach, type EP 630. The machine is in very good condition. The press worked in an engraving company as a test press. Technical data: Pressing force: max. 630 tons. Installation height: max. 325 mm Stroke: max. 275 mm Weight: 4,000 kg

Key data: 300 t, 800 mm

Hydraulic Press Emanuel 300 ton Year of construction: 1989 Dimension table: 1600 x 1300 mm Light max: 1130 mm Light min: 350 mm Slide stroke: 800 mm Cushion stroke: 400 mm Side upright clearance: 640 mm

- Pressure capacity: 22 t - Projection: 175 mm - Stroke: 120 1/min - Plunger adjustment: 50 mm - Table height adjustment 50 mm - Stroke adjustment: 8-80 mm - Table: 520 x 400 mm - Plunger: 250 x 160 mm - Turnbuckle with trunnion clamping, D35 mm - Motor power 1.5 kW - Very smooth running - Mechanical disengagement of the rotary wedge coupling via pneumatic pneumatic cylinder - Pneumatic foot switch - No UVV - 4 pieces of machine feet - Connection cable CEE plug 16 A - Air connection with quick coupling - Weight: approx. 2,000 kg - Dimensions: Width 820 x Depth 1100 x Height 1800 mm

Code: 0223 Brand: ITALPRESSE Model: PHF Hydraulic press for curved veneers for processing seats, chair backs, benches, tables and other curved items Technical data: Platen dimensions mm 2600 x 1600 Opening between platens mm 1500 Thrust ton 100 Movement from bottom to top Motor power Hp 4

Key data: 800 t, 1350 mm

Hydraulic Press Gigant 800 ton Year of construction: 1997 Dimension table: 3200 x 2200 mm Light max: 1800 mm Light min: 450 mm Slide stroke: 1350 mm Cushion stroke: 510 mm Side upright clearance: no

Slotted Hole Drilling Machine Scholz Type L4 Machine No. 4905 Motor power 2.2 kW With 1 hold-down device on the table Table can be moved to the left and right Drill motor can be moved forward and backward Table size 560 mm x 250 mm Height-adjustable table Flat belt drive Weight with pallet 305 kg Shipping dimensions 1320 mm x 800 mm x H 1500 mm

Membranpresse modell FISMA 210 (ITALIEN) Arbeitsgröße: mm 2100 x 1200 Öffnung mm 500 Arbeitshöhe mm 250 Öffnen und Schließen des Deckels mit vertikalen Pneumatikkolben Diese Presse eignet sich zum Furnieren von Formteilen wie Fensterflügelrahmen und gebogenen Teilen Oberheizung mit Heißluft Beheizung der Unterseite mit Heißluft Verbrauch approx. 9 kWt Arbeitszyklus: approx. 10 Min. Kompletter Kompressor zum Anheben der Abdeckung und unter der Abdeckung Verarbeitungsvorvakuum einstellbar bis 6,5 atm

Technical data: Capacity, ton 1000 Ram stroke, mm 400 Max. ram strokes per min. 20 Shut height,mm 1000 Ram adjustment, mm 320 Table size, mm 3150 x 1800 Ram size (front-to-back), mm 1700 Column gap size, mm 1500 x 1900 Bolster plate thickness, mm 250 Ram travel to its extreme position where it develops nominal capacity, mm 12 Pneumatic cushion capacity, ton 200 Pneumatic cushion E51031468 stroke, mm 200 Upper knock-out capacity, ton 50 Main motor power, kW 132 Press dimensions, mm 5150 x 4700 x 7830 Press weight, kg 200000

Bread Roll Press Fortuna Automatic A 3 H+ Dough dividing and rounding machine TOP model with effective shutdown Head cleaning to the back Dividing head with stainless steel knife NEW Dough insert up to 2400g Dough divider with 3 new knitting plates Connection 400V, 16A-CEE plug Used machine overhauled with warranty Quality from a specialist company! Benefit from over 35 years of experience! Option: Platform or chassis Wirkteller Neu Service Package Maintenance contract E-Box Instruction & Commissioning

Hydraulic Press Emanuel 500 ton press Year of construction: 1976 Dimension table: 2500 x 1900 mm Light max: 1490 mm Light min: 550 mm Slide stroke: 940 mm Cushion stroke: 400 mm Side upright clearance: 900 mm

Specifications Maximum pressure: 5.7 tons Pressing force: 1.18 kg/cm Bale size: 600x800 mm Bale weight: approx. 70 kg Power connection: 400V / 1.5 kW Year of Make: 2009 Productivity: approx. 3 bales/hour

Hydraulic Press MURARO 500 ton Year of construction: 2001 Dimension table: 2600 x 1600 mm Dimension lower table: 2700 x 1600 mm Light max: 1500 mm Light min: 700 mm Slide stroke: 900 mm Cushion stroke: 400 mm Side upright clearance: 770

Brand: JOVISA Model No.: HC-2/40 Year: 2011 Engine: 25 hp (18.5 kw) Refurbished 2020 Automatic vertical tying 40 tons of force 800x700 bales Weight:500 kg

Key data: 1200 t, 1000 mm

Hydraulic Press Gigant 1200 ton Year of construction: 1993 Dimension table: 3700 x 2700 mm Dimension lower table: 3700 x 2700 mm removable Light max: 1590 mm Light min: 610 mm Slide stroke: 1000 mm Cushion stroke: 400 mm Side upright clearance: no

Capacity 50 tons Stroke 750 mm Table size 1500x1000 mm

Specifications Maximum pressure: 4 tons Press force: 1.14 kg/cm² Bale size: 700x500x600 mm Bale weight: approx. 60 kg Power connection: 230V / 1.1 kW Year of Make: 2012 Productivity: approx. 3 bales/hour Price: on request Machine is fully functional after technical supervision. If you have any questions, please call us: +48 696 072 985

KOMPLETE RUF ANLAGE BRIKETPRESSE RUF600 600KG/H YEAR OF MANUFACTURE 2009

COLOGNE L2 YOC 1992 Rated current: 3.2 A (380V) 2 speeds (1,500 + 3,000 rpm) 2-lever operation Dowel pitch: 16 / 22 / 25 / 32 mm Drilling depth: 150 mm Drilling length: 200 mm Height adjustment by handwheel: 120 mm Altitude display via dial gauge in the handwheel Tischgr. 350 x 820 mm Keyless chuck 2 pneumatic workpiece clamps (safety clamping cylinders) Mitre stop (adjustable up to 60° on both sides) 90° plug-in stop Chassis Weight: 220 kg Manufacturer

Inv. Num. : 946 Type: LKO 315 Producer: ŠMERAL Created: 1956 Parameters: Length: 3600 mm Width: 1750 mm Height: 4600 mm Plunger stroke: 180 mm Number of strokes: 60 / min Weight: 17 000 kg Power requirement: 25 kW Voltage: 380 V Frequency: 50 Hz

Manufacturer: EXNER Model: PG 80 Year of Manufacture: 2014 The EXNER PG 80 is a four-column hydraulic tool testing press for testing stamping, forming, embossing, and drawing tools. It is designed for high precision and durability, with modern proportional hydraulic control and digital force display for tool setup and testing. Technical Data Press Ram - Number of press cylinders: 2 pcs - Nominal force (adjustable): 2 × 400 kN - Return force: 2 × 150 kN - Stroke: 350 mm - Ram width: 2100 mm - Ram depth: 840 mm - Guide length: 750 mm - Ram speed under load (100%): approx. 0–10 mm/s - Ram return speed: approx. 0–20 mm/s - T-slots (DIN 650): 18 mm - T-slot pitch: 150 mm Installation Space - Installation height (top to bottom): 550 mm - Table width: 2100 mm - Table depth: 840 mm - Table T-slots (DIN 650): 18 mm - T-slot pitch: 90 mm - Table passage (W×D): 1300 × 120 mm (to be  ...