forging presse used for sale

Baler Macpresse MAC 105, press force 70 t, year 2011 Technical data: Manufacturer: Macpresse International S.R.L., Milan / Italy Type: MAC 105 Year of Make: 2011 Hours: 23130 Pressing force: 70 t Drive power: 45 kW Mains voltage: 380 V / 50 Hz Filling opening: 1500 x 750 mm Bale chamber volume: 1.5 m³ Bale size: 1100 x 800 mm Throughput / mixed paper: 15 t/h Binding: 5-fold horizontal Transport dimensions: approx. 9,500 x 1,800 x 2,500 mm (L x W x H) Press weight: approx. 16,000 kg Accessories: Funnel Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is subject to change, subject to prior sale and can be revoked at any time.  ...

Lg.Nr. 25514 Defective Hydr. CN Press Brake Technical data: - Max. working length 3060 mm - Column passage 2690 mm - Max. pressing force 1300 kN - Max. distance table / plunger 370 mm - Stand projection 410 mm - Plunger stroke 215 mm - Lifting speeds - Downward speed idle max. 200 mm/sec - Upward speed 135 mm/sec - Downward pressing speed 1 to 11 mm/sec - Total drive power 18 kW - Pneumatic connection 6 bar - Space requirement approx. W 3800 x H 2400 x D 2400 mm - Weight approx. 11500 kg - with: - with 6 axis CNC control DELEM - Two-hand control panel with foot switch - crowning device - Controlled backgauge with height adjustment 5 - 860 mm - Hydr. Upper + Lower - Tool Clamping - Die table displacement pneumatically supported Machine does not drive reverence because 2 axles right in the back gauge are without function, control module may ...

Technical data Maximum pressure: 60 tons Year of manufacture: 2011 Pressing force: 78 tons/m² Number of bindings: 5 Channel cross-section: 750 x 1100 mm Dimensions of the tailgate: 1500 x 1100 mm Bale weight: 425-575 kg Weight: approx. 21 tons Power connection: 400 V Bale tying: automatic Press capacity under operating conditions: max 370 m³ / hour Press capacity at idle: max 940 m³ / hour Theoretical throughput: to density 30kg/m³) 11 tons/hour Theoretical throughput: to density 50kg/m³) 15 tons/hour Theoretical throughput: to density 100kg/m³) 22 tons/hour Open hopper allows filling with the conveyor belt Pre-pressing flap Automatic regulation of the channel Automatic binding with wire Choice of the length of the finished bale thanks to the bale counter Compact hydraulic power unit with low noise emissions Press plate stably g ...

Number of boring spindles: 1 St. Boring depth max.: 150 mm Motor output: 1,5 kW Table dimensions: mm Overall size: mm Weight: ca. 290 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For Pellet Productions ( 3 sets available ) The sets brand new and not used Pellet mill 65-1500 Number of rollers 6 Flat-die 1500X100X 8,0 Flat-die 1500X100X10,0 With Automatic press control system, EAPR Without Drive motors

Key data: 63 t

Press force: 63 t, with drawing cushion and separate hydraulic power unit

Used TR-5 rotary tablet press. Technical Specifications - Manufacturer – Metalchem ​​Annopol - Type – TR-5 - Number of punches – 35 - Pressing pressure – max. 10 tons - Year of manufacture – 1988 - Weight – approx. 2000 kg The machine is operational but requires repair.

2 hydraulic presses and 1 workbench Auction-ID: A7-50851-90

pressure:250 t passage width:1280 mm stroke:bis 500 mm total power requirement:47 kW weight of the machine ca.:23 t dimensions of the machine ca.:2200 x 1850 x 4600 mm table surface area:1250 x 1000 mm dayligth:800 mm daylight between the side columns:520 x 750 mm table height above floor:1000 mm Documents: vorhanden

Used HOESCH chamber filter press. Technical specifications: Manufacturer – Hoesch Germany Type – 40/400806/4 Capacity – approximately 0.5 m3 Filtration area – approximately 40 m2 Operating pressure – up to 0.4 MPa Frame material – polypropylene Number of frames – 41 Year of manufacture – 1988 Plate size – 800 x 800 mm Operating pressure – approximately 6 bar Electrical box with press control.

The machine is in good technical condition; testing is possible by prior arrangement. WORK TABLE (MM) 900 x 700 mm UPPER PLATEN (MM) STROKE (MM) 550 x 400 mm 600 mm DAYLIGHT (MM) RAM CYLINDER DIAMETER 900 mm 135 mm / 1 pc AUXILIARY CYLINDER DIAMETER 3550 mm / 2 pcs RAM CYLINDER DOWNWARD SPEED (MM/S) 250 mm/s RAM CYLINDER RETURN SPEED (MM/S) 250 mm/s RAM CYLINDER WORKING SPEED (MM/S) 10 - 40 mm/s MOTOR PUMP 18.5 kW 45 cc OIL TANK (LITERS) OIL (LITERS) 345 l 67 l

Shelf press for veneering ORMA NPC 6/100 Shelf length 2500mm Shelf width 1300mm Number of batches 3 Automatic pressure boosting Safety cable "breakaway" Water press heating with water from the CO system Working pressure 350bar Press on 6 actuators Piston rod diameter 85mm CE Certificate Machine dimensions 340x165x255cmH Machine Weight 6000kg