forging press used for sale

- Hand & foot control - integrated ambos - solid substructure Specifications: - Hammer weight: 40 kg - Lifting height: 230 mm - Projection: 240 mm - Cylinder Ø: 140 mm - Motor power: 4 kW - Voltage: 400 V - Dimensions WxHxD: 700 x 1900 x 1200 mm - Weight: approx. 900 kg

Air steam die forging hammer : Capacity : 16 tons, Nominal mass of drop parts : 16000 kg, Impact energy : 400 KJ, Ram stroke : 1500 mm, Ram stroke per minute : 20, Distance clear between guides : 1180 mm, Ram dimensions front to back : 1500 mm, Die holder dimensions front to back : 1600 mm, Bottom die impression to floor distance : 500 mm, Steam/air pressure : 0.7-0.9 MPa, Overal dimensions : - Floor space : 4500 x 2450 mm, - Height above floor level : 7920 mm, Mass of anvil block : 325 tons, Total weight of hammer : 425 tons.

Producer: HUTA ZYGMUNT, Model: MPM 6300B, Origin: Poland, New in: 1978, Force: 2500 kGm, Stroke of ram: 850 mm, Space between shears: 650 mm, Length of die seat in ram: 650 mm, Length of die seat in cushion: 900 mm, Max. weight of top die: 800 kg, Min. die height: 300 mm, Strokes/min: 100,

Nominal mass of falling parts, taking into account the mass of the upper stamp (500 kg.), Kg. 5000 Actual mass of falling parts without top stamp, kg. 5030 Effective kinetic energy of falling parts at full successive impacts, kgc m 12500 The greatest working stroke of a woman, mm. 1300 The smallest height of dies without shanks, mm. 400 Distance between guides in the light, mm. 800 The length of the woman in the direction perpendicular to the front of the hammer, mm. 1180 Steam (air) pressure before entering the cylinder, atm. 7-9 Nominal mass of the upper die, kg 500 The largest mass of the upper die, kg. 1500 The highest permissible steam temperature, ⁰C 200 weight 145-148ton, weight of anvil block 75+22 ton.

Capacity :10 tons, Weight of falling part,nominal mass of drop parts without upper instr.:9 tons, Effective working kinetic energy after blow :25000 kg mtr., Max. working ram stroke :1400 mm, Max no of blows : 30/min , Distance between slides : 1000 mm, Shut height : 775 mm , Ram size front to back :1200 mm, Bolster size front to back :1200 mm, Air pressure : 7-9 MPA , Height of instruments : 450 min., Die-holder front to back dimensions: 1400 mm, Height above floor level: 7270 mm, Hammer dimensions : 4400x10420x2700 mm, Weight (less anvil block): 73.5 ton, Weight of anvil block : 203.8 tons.

Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm Dimensions: -Left-to-right: 3940 mm -Front-to-back: 1430 mm Height above floor level: 3260 mm Weight: -With an anvil-block: 25600 kg -Without an anvil-block: 16600 kg

Capacity: 1 200 T, Total stroke: 500 mm, Stroke of main crank shaft: 318 mm, Stroke of mobile die: 215 mm, Stroke/min: 27, Bar diameter: 50-90 (150) mm, Max diameter of peace: 152mm, Max weight of piece: 5 kg, Main motor power: 75 KW, Area of machine : 6400 x 4420 mm, Hight of machine: 3830 mm, Weight: 128.0 T

Effort 2000t moving matrix 280 mm landing pad 570 mm landing slider after closing the matrices 390 mm Number of moves of the ram, stroke / min 25 Electric motor power 160 kW Dimensions, mm: LWH = 856053604850, the level above the floor is 3200. Weight of the car without electricity: 239.8 tons. Weight of the bed: Front part: 82 tons. Rear part: 55t. Weight 270 ton

Specifications: - Total width approx. 800 mm - Work surface length / web length approx. 120 mm - Working surface depth / web depth approx. 120 mm - Total depth approx. 100 mm - Round horn approx. 340 mm - Square horn approx. 340 mm - Anvil height with substructure approx. 820 mm - Anvil weight approx. 65 kg - Substructure approx. W 420 x D 420 x H 300 mm - Substructure mounting hole 85 mm - Weight of substructure approx. 35 kg

Herdwage n Glühöfen Kammerschmiedeöfen Wärmebehandlungskammeröfen Wärmebehandlungs Kammeröfen für ALU-Blechcoils Wärmebehandlungs Schachtöfen Haubenöfen Härten Anlassen bei niedriger und hoher Temperatur Glühen Normalglühen Austenitisieren Spannungsfreiglühen Vorwärmen vor dem Schmieden Rollenherdöfen Kontinuierliche Öfen für die Wärmebehandlung von buerstlein Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen zirlguss Hubbalken und Hubherdöfen Schachtofen Haubenofen Rollenherdöfen Durchstoßöfen Härten Glühen Normalisieren Weichglühen Vergüten Anlassen Entspannen Durchschuböfen Hubbalkenöfen Hubherdöfen Trockenöfen Rollenherdöfen Drehherdöfen Kammeröfen Mehrkammeröfen Verfahrbare Haubenöfen Herdwa ...

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

for production of forgings by forging of ferrous, non-ferrous metals and alloys in the hammer dies model M212 Impact energy, 50 kJ Nominal weight of falling parts, kg 2000 Stroke woman, mm 1200 Stroke woman, mm 1200 Machine dimensions Length Width Height (mm) 3650X1660X5310 Weight kg 58.310, spare parts available

Key data: 150 kg, 480 mm, 375 mm

Hammer weight: 150 kg Stroke length: 480 mm Stroke rate: 168 p/min. Projection: 375 mm Plunger diameter: 180 mm Origin: England Motor power: 11 kW Machine LxWxH: 200 x 180 x 240 cm Machine Weight: 6000 kg

Complete Mechanical Upgrade by GFM, with increase of Power to 900 Ton/hammer and new CNC in 1991 Numbers ̈of Hammers: 4 Forging force: 3.600 Ton (900t per hammer) Strokes per minute: 270 Maximum diameter of forging: - circular cross section: Ø 400 mm - square cross section: 320 mm Minimum output diameter: - circular: 60 mm - square: approx 50 mm Maximum length of forging with/without lateral reception: 8.000 mm / 9.700 mm Feed of manipulator A: 7.140 mm Feed of manipulator B: 9.940 mm Workpìece weight: 2500 kg Total power supply (nominal power): ca 1.600 kW Machine weight: 493.000 kg

diameter: 400 mm workpiece length: 8000 / 9700 mm number of blows: 4 Forging power: 3600 (4x 900) kN no. of strokes: 270 Hub/min length: Hammer 610 mm Material Inlet Diameter: round: 400/ Square 320 mm Control: GFM CNC total power requirement: 1600 kW weight of the machine ca.: 493 t dimensions of the machine ca.: 44 x 20,5 m The line was mechanically overhauled in 1991 with an increase in forging force to 900 tonnes/hammer and a new CNC control system - CNC control GFM CNC - Forging machine SX-40 - 2 manipulators with beds -- Manipulator A - stroke: 7140mm -- Manipulator B - stroke: 9940mm -- Maximum diameter in the manipulator: 400 mm -- High travelling speed of the manipulator: 500 mm/sec. -- Feed speed of the manipulator: 10 - 200 mm/sec. infinitely variable - Loading/unloading: -- Loader: max. load capacity: 2500 kg --- max. workpiece length: 3000 mm --- Minimum workpiece length: 15 ...

diameter: 130 mm workpiece length: 4000 mm number of blows: 4 Forging power: 1600 per Hammer kN no. of strokes: 620 Hub/min length: Hammer 270 mm Material Inlet Diameter: round: 130 / Square 115 mm total power requirement: 280 kW weight of the machine ca.: t dimensions of the machine ca.: 24,7 x 16 m The line is complete with: - Forging Machine SX-13 - 2 (two) Manipulators with Beds -- Max. diam. in the Manipulator: 130 mm -- Manipulator torque force: 3 kN -- Manipulator high travel speed: 500 mm/sec. -- Manipulator feeding speed: 15 - 200 mm/sec. infinitely variable - Loading / Unloading Devices -- Bar Loader: max. load capacity: 300 kg -- max. work piece length: 2.100 mm -- min. work piece length: 00 mm -- Bar Unloader: max. load capacity: 300 kg -- max. work piece length: 4.000 mm -- min. work piece length: 500 mm - Electrics with Controls and Pulpits - Hydraulics and Pneumatics Curre ...

length: 880 mm weight: 60 kg height: 320 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm Dimensions: -Left-to-right: 3940 mm -Front-to-back: 1430 mm Height above floor level: 3260 mm Weight: -With an anvil-block: 25600 kg -Without an anvil-block: 16600 kg

Air steam die forging hammer : Capacity : 16 tons, Nominal mass of drop parts : 16000 kg, Impact energy : 400 KJ, Ram stroke : 1500 mm, Ram stroke per minute : 20, Distance clear between guides : 1180 mm, Ram dimensions front to back : 1500 mm, Die holder dimensions front to back : 1600 mm, Bottom die impression to floor distance : 500 mm, Steam/air pressure : 0.7-0.9 MPa, Overal dimensions : - Floor space : 4500 x 2450 mm, - Height above floor level : 7920 mm, Mass of anvil block : 325 tons, Total weight of hammer : 425 tons.

Capacity 7.25T /16000lbs Stroke 1727 mm weight 270t

Capacity 5.4T /12000 lbs Stroke 1626 mm weight 150t

Capacity 2.7T /6000 lbs. Stroke 1403 mm weight 77.5t

CAPASITY 11 KJ 400 KG

Complete overhoul with new electrics in 2016 Lift load: 1000 kg Load moment: 2400 mkg Max Rds: 400 mm Min Rds: 100 mm Speed: 0-90 m / min Driving power: 22 kW / 380V / 50Hz Total weight: 10,5 t Mode of operation: oil-hydraulic

Upsetter STANKO RYAZAN B1141 Nominal effort 1250t Max. workpiece diameter 140 mm Max. upset flange diameter 180 mm Stroke of moving slider 220 mm Stoke of upsetting slider: total/working - 460/310 mm Strokes per min 30 Matrix dimensions 700x260x820 mm (LxWxH) Distance upsetting slider and matrixes 180 mm Electric motor power 75 kW Machine overall dimensions 6400x4365x3340 mm Weight 135t Excellent condition. Very little use- it shows from the gears. Can be inspected in operation

loading area: mit Untergestell weight: 125 kg length: 900 mm height: 350 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

length: 620 mm width: 130 mm height: 300 mm weight: 88 kg : Antik Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: Krups A100 : . Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

stroke: . mm weight max.: 300 kg speed: . m/min total power requirement: . kW weight of the machine ca.: 2,5 t dimensions of the machine ca.: . m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max.: 800 kg workpiece length: . mm work piece width: . mm stroke: 500 mm total power requirement: . kW weight of the machine ca.: 5 t dimensions of the machine ca.: 3x1,6x2 m Electric drive Transport 800 kg Forging 500 kg The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 1000 kg workpiece length - max.: 6500 mm weight of the machine ca.: 600 t dimensions of the machine ca.: 120x30 m For sale is an entire forge. Consisting of: Steam preparation Heat treatment Blacksmith hammers 3 x Dango & Dienenthal manipulators Extensive accessories Extraction system Saws Storage and cooling racks Cooling hood The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hir ...

rated capacity: 2000 KG ram hammer stroke: 1080 mm throat: 1100 mm impact capacity: 10000 kgm no. of strokes: 125 Hub/min ram hammer weight: 2300 kg work height max.: 620 mm total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m Steam drive No.3064 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with Modul ...

ram weight: 1000 kg stroke: 1000 mm throat: 800 mm impact capacity: 4200 mkp total power requirement: . kW weight of the machine ca.: t dimensions of the machine ca.: m Steam drive The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ram hammer weight: 480 kg stroke: 710 mm throat: 550 mm impact capacity: 1250 kpm no. of strokes: 210 Hub/min ram hammer stroke: 710 mm work height max.: 720 mm total power requirement: . kW weight of the machine ca.: 7,4 t dimensions of the machine ca.: m pressure: 400 kg Steam drive No. 3065 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created w ...

pressure: . t total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m An entire forging plant in Germany is for sale. Includes: Banning forging hammers (10–50 hundredweight), Dango and Dienenthal HSM 12 manipulators, Merz bogie-hearth furnace, hood-type furnace, etc., wedge- ram spare parts, etc., mechanical workshop, oil storage facility. The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We ...

weight max.: 1000 kg workpiece length: . mm work piece width: . mm Drive: elektr. total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 4,2x2,1x2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A BÊCHÉ hydraulic short-stroke die forging hammer is offered for hot forming and die forging of workpieces. Working capacity: 16kJ, continuous blow frequency at full load: approx. 32/min-38/min, max. blow frequency: 122/min, final ram velocity: 5.1m/s, main drive pump flow rate: 187.5l/min, circulation pump flow rate: 120l/min, oil capacity in the drive head: 550l, clear width between the guides: 520mm, working height to upper edge of insert: 750mm, ram depth: 470mm, insertion depth: 550mm, die height min./max.: 120mm/320mm. Total weight: approx. 23.2t, anvil bed, overall dimensions X/Y/Z: approx. 1485mm/825mm/4552mm, max. space requirement/foundation dimensions X/Y: approx. 3350mm/3300mm. An on-site inspection is possible.

We have an EUMUCO RW1 Reduce Forging Roll Machine available for sale. Manufacturer: EUMUCO Model: RW1 Condition: Used Technical specifications: Maximum workpiece diameter: 55 mm Rolling segment diameter: 370 mm Usable width of middle roll: 500 mm Usable width of outer roll: 160 mm Maximum workpiece length, middle: 570 mm Maximum workpiece length, outside: 890 mm Roll adjustment: 15 mm Drive power: 30 HP Electrical: 230/460 V Approximate weight: 22,000 lbs (10,000 kg) Please let me know if this equipment could be of interest to you, and I can provide

Dimensions of the storage area: 360 x 140 mm incl. platform Reference: Geuder - Lot 13 Dimensions: 800x500x1150mm Weight: approx. 150kg Auction-ID: A7-49882-283

Pneumatic press, pneumatic press BOSCH type 0840 002 002Fabr. No. 041 Year of construction 1980Compressive force 18 KN = 1,8 ton. at 5 bar 15 kN = 1.5 ton. at 4 bar 12 kN = 1.2 ton. at 3 bar 8 kN = 0.8 ton. at 2 bar 6 kN = 0.6 ton. at 1.8 barprojection 100 mmram stroke 70 mmtable surface 245 x 200ram area 45 mminstallation height max. 235 mmClamping pin hole 20 mm with clamping screwCompressed air requirement 5 bar- Press force infinitely adjustable via pressure regulator- Pneumatic cylinder with plunger

Model: MAXX20 Date of manufacture: 20/10/2015 Power supply: 230 V Power: 1800 W Amperage: 7.5 A Frequency: 50/60 Hz Conformities Indicated: CE, RoHS, UL Controls: Digital display with temperature and time adjustment Pressure: manually adjustable Operation: Manual closing with automatic timer Accessory/visible document: Heat Press Caddie documentation, mobile stand compatible with several Hotronix presses. User manual present. Auction-ID: A3-46152-35850

AGA pressure reducers, pressure regulators, pressure gauges and connection/valve parts Auction-ID: A1-50015-43

AGA pressure reducers, pressure regulators, pressure gauges and connection/valve parts Auction-ID: A1-50015-38

AGA pressure reducers, pressure regulators, pressure gauges and connection/valve parts Auction-ID: A1-50015-78

used membrane chamber filter press / filter press Passavant Noggerath 1200 x 1200 frame size: K1200 / 110 format of the filter records: 1200x1200 execution: unanimously (filtrate derivation by a collective management) material of the filter records: PP material of the membrane records: PP number of the filter chambers: 100 max. / 33 strength of the filter cake: 30 mms mix pack filtration surface: 230 max. / 76m? filtration volumes: 2985 max. / 985 litres filtration pressure in the chambers: 8 cash max. pressure under the membrane: 15 cash max. temperature with filtration: 20 °C max. material of the filter cloth: PP working pressure in the hydraulic cylinder: 400 cash max. dimension of the chamber filter press: Length: 9,786 mms, width: 2,550 mms, height 2,100 mms weight of the chamber filter press without mud: 18,210 kg of MAX hydraulic oil: OH-HM 32  ...

Used chamber filter press / filter press Rittershaus & Blecher / R & B 800 x 800 Plate size: 800 x 800 mm Chamber number: 100 pieces Filter pressure: 15 bar

Chamber filter pressing rack Filox uses 1200 x 1200 with approx. 100 records

If mobile chamber filter press / used filter press Filox 800 x 800 construction year: In 1980 record format: 800 x 800 mms benefit length: 5,200 mms chamber number: 88 pieces cake thickness: 25 mms filter pressure: 15 cash Schliessdruck: Min 300 cash, max. 320 cash whole filter surface: approx. 98 square metres cake volumes ges .: approx. 1,100 litres engine tension: 380 V, 50 hertz protective kind: IP 44 record material: PP expiry: openly service side: on the left cloths: Optionally

Used chamber filter press / filter press Rittershaus & Blecher / R & B AEHIS /1200 x 1200 Plate size: 1200 x 1200 mm Useful length: 2500 mm Chamber number: 44 pieces Cake thickness: 30 mm Filter pressure: 16 bar Closing pressure: min. 380 bar / max. 440 bar Total filter area: 110.5 m2 Cake volume totalling: 1504 litres