force control used for sale

Filter control valve, switching valve, maintenance unit, water separator, filter bowl, pneumatic filter, filter regulator, maintenance unit combination, filter control valve -Manufacturer: Festo, Maintenance unit with filter and control valve, original packaging -Type: LFR-1/2-D-MIDI -Pressure: max. 16/12 bar -Number: 2x filter control valves available -Price: per piece -Weight: 1.3 kg/pc.

Crane remote control, crane control, crane control, pendant control, control switch, control cylinder -Handover: in its current condition as seen, see photos -Condition: the switching elements are missing -Manufacturer: Demag, control switch for crane remote control with cable -Type: DSE -Connector: 16-pin -Transport dimensions: 600/330/H140 mm -Weight: 3.5 kg

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2160 mm, 762 mm, 650 mm

For sale : Doosan vertical machining center type DNM 750L II with a Heidenhain i TNC 620 controller. Very nice machining center like new. Available at short notice. Includes tool holder and machine clamps. X-, Y- and Z-axis movement 2,160 762 x 650 mm. Cooling by the spindle with 70 bar high-pressure, chip conveyor with right ejection, Renishsow workpiece measuring system, etc.

Key data: 3000 mm, 800 mm, 800 mm

For sale Matec vertical machining center type 30 HV. Equipped with a Heidenhain and TNC 530 controller. This machining center also has a swivel head: 1-axis swivel head, infinitely variable, +/- 105°. Equipped with a chip conveyor with left ejection, and high pressure pump with fine filter installation. In very good condition. With machine clamps and tool holder SK-40 holder.

Key data: 1270 mm, 660 mm, 610 mm

For sale Beautiful machining center type VMX-50, equipped with an Ultimax controller. X-, Y-, and Z-axis movement is 1,270 x 660 x 610 mm. BT-40 spindle mounting. Chip conveyor with right ejection. Table size 1,500 x 660 mm. Machine weight 9,500 kg.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 800 mm, 450 mm, 510 mm

Doosan DNM 4500 Vertical Machining Center (VMC) Year of construction: 2016 Condition: Used – in very good working condition Well-maintained Doosan DNM 4500 vertical machining center, ideal for precision milling and general machining. Technical specifications: X-axis travel: 800 mm Y-axis travel: 450 mm Z-axis travel: 510 mm Rapid traverse (X/Y/Z): 36 / 36 / 30 m/min Spindle speed: up to 8,000 rpm Spindle power: 18.5 kW Spindle torque: 117.8 Nm Tool changer: 30 positions Table size: 1,000 mm Max. workpiece weight: 600 kg Machine weight: approx. 5,000 kg The machine has been regularly maintained and is in good condition. Inspection under power is possible.

Code: 0348 Brand: VITAP - ITALY Model: POINT K2 TOP - CE CE Standard CNC working centre for the precise and flexible drilling and milling of panels, furniture, custom-made furniture, kitchens, bathroom furniture and various – CE Standard – Year 2017 Technical specifications: Compact machine Patented D.D.T. (double dynamic transport) system with continuous panel movement without any repositioning of the workpiece, using two clamps. Technical data: Panel dimensions: Min/max length 270/3000 mm Min/max width 180/1100 mm Max height 50 mm Horizontal panel feed on X-axis 25 mt/min Vertical feed on Z-axis 15 mt/min Horizontal feed on Y-axis 30 mt/min Drilling head: Motor 2 Hp 12 vertical spindles side 1 Z-axis 2 horizontal spindles side 4 Y-axis 2 horizontal spindles side 6 of the Y-axis 2 horizontal spindles side 3 X-axis 2 horizontal spindles side 5 X-axis  ...

Vertical machining center EUMACH SUMO 1100, CNC Selca X 1100 mm Y 610 mm Z 610 mm Rapid feeds linear axes X Y Z 30 m / min Table dimensions 1270 x 640 mm Max table load 1200 Kg Spindle 16 Kw / 10,000 rpm - ISO 40 Tools 24 Coolant through the spindle 2007 Under power in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy, The machining center is a machine tool equipped with a numerical control capable of performing multiple mechanical operations, with a single set-up on multiple surfaces of the same work piece. It is generally equipped with several motion axles and one, automatic tool exchange system and sometimes multiple pallets

Hwacheon, mod Sirius III - 1250, Table 1400 700, X 1100 mm, Y 700, Z 650, Cambio utensili / Toolchanger 30 pos, ISO 50, 8000 RPM max 30kW, CNC Fanuc 18iMB, Still under power on the shop floor

Speed-controlled screw compressor Renner RSKF 1-30 incl. refrigerant dryer and particulate filter Manufacturer Renner Machine number 1008121 Type RSKF 1-30 Year of construction 2021 max. pressure 10 bar Power consumption 30 kW Delivery rate 4,810 l/min Operating hours 11,760 B/h Load hours 8,671 B/h Machine utilization: 20-40% 799.87 B/h 40-60% 632.50 B/h 60-80% 427.45 B/h 80-100% 198.18 B/h Last service at 11,090 B/h incl. control unit for the frequency converter Particulate filter, connection cable and connection hose lxhxw 108x64x121 cm Weight 850 kg Loading costs 100,00 Euro Auction-ID: 04J-7Y8-1

BUCHI Syncore Q-101 platform + KNF vacuum pump + V-850 vacuum controller Model: Büchi Analyst Q-101 Vibration frequency: 0 - 300 min⁻¹ Heat output: 1500 W Temperature range: Up to 100 °C W×D: 480×487 mm Included: Polyvap R-12 Rack (120ml) A condensing unit and flask A KNF vacuum pump A Buchi V-850 vacuum controller Traces of rust in the bottom of the heating element Equipment tested

Key data: 2000 mm, 600 mm, 700 mm

5 Axis CNC Machining Center Manufacturer Matec Type 30 HV Year of construction 2013 Control Heidenhain iTNC530 Simultaneous Travel X/Y/Z 2000/600/700mm NC Rotary Table D=950mm Load 1200kg max. speed 18,000 rpm Tool magazine 48-fold IKZ 26bar Automatic tool measurement Tool breakage detection 3D wireless pushbutton m & h Electric Handwheel HR410 Chip conveyor Control at 33344h Program run 11291h The machine is in TOP condition, technically and geometrically very good.

Pilot operated proportional valve, Bosch No. 0811404938 + Bosch No. 1817414331

THERMOSCIENTIFIC electrically adjustable height base for Heraguard ECO 1.2 horizontal flow hood, width 120cm New equipment in its original packaging For use with the Heraguard ECO 1.2 model (1.2m wide hood) Description: ECO working height from 760 mm to 960 mm with three heights in memory Product type: Electrically adjustable height base Overall height (metric): 680 to 880 mm Colors: Black and White/Gray Delivered disassembled, to be assembled

Key data: 600 mm, 500 mm, 500 mm

CNC 5-Axis Vertical Machining Center DMG Mori DMU 60 eVo Year of construction 2017 Heidenhain TNC 640 ERGOline 2-axis NC swivel rotary table Table size 600 × 500 mm Table load max. 400 kg Table NC Rotary Axis C-Axis 360° Table NC swivel axis B-axis -5° / +110° X 600 mm Y 500 mm Z 500 mm Spindle holder SK 40 BIG PLUS Spindle drive power 25 / 35 kW AC Spindle speeds up to 20,000 rpm. 120 tool magazine slots Operating hours 47,589 Spindle hours 28,638 Offer number MV-6512

Key data: 750 mm, 600 mm, 520 mm

CNC 5-Axis HSC Vertical Machining Center DMG DMU 70 eVo Linear NEW DESIGN Year of construction: 2011 Heidenhain iTNC 530 2-axis NC swivel rotary table Table size Ø 700 x 500 mm Table load max. 350 kg C-axis rotation 360° x 0.001° Swivel axis B-axis 120° x 0.001° X 750 mm Y 600 mm Z 520 mm Spindle drive motor 25/35 kW Spindle speeds max. 18,000 rpm. 60-fold tool magazine positions Tool holder HSK-A63 Electrified tour of the factory Offer number MV-6513

Key data: 1 mm, 1 mm, 700 mm

5-Axis CNC Vertical Machining Center Mikron HPM 1150U Year of construction 2013 Heidenhain iTNC 530 NC Rotary Table Table Ø 1,000 mm Table load max. 1,100 kg Table rotation axis c-axis 360° / 0.001° NC swivel spindle Head swivel axis B-axis +16°/-120° / 0.001° X 1,000 mm Y 1,150 mm Z 700 mm Spindle speeds up to 24000 rpm. 238 tool magazine slots Two identical machines (MV-6519/MV-6520) available. The machines come from a former aerospace facility and are in good condition. They ran for about 8 years in continuous operation and 5 years sporadically. Offer number MV-6519 + MV-6520

Key data: 762 mm, 460 mm, 460 mm

5-Axis CNC Vertical Machining Center Okuma MU-400VA Year of construction 2009 OSP P200M CNC Control 2-axis NC swivel rotary table Table clamping - Ø 400 mm Table load max. 300 kg C-axis 360° A-axis +20°/-110° X 762 mm Y 460 mm Z 460 mm Spindle drive power 22 kW Spindle speeds max. 15,000 rpm. Tool holder HSK-A63 32 tool magazine slots Tool diameter max. 90 / 125 mm To be visited under power. Offer number MV-6440

Key data: 762 mm, 508 mm, 508 mm

5-Axis CNC Vertical Machining Center Haas UMC 750 Year of construction 2019 Haas CNC 2-axis NC swivel rotary table Table diameter Ø 500 mm Table load max. 300 kg. C-axis 360° B-axis +120°/-35° X 762 mm Y 508 mm Z 508 mm Spindle holder ISO 40 Spindle drive power 22.4 kW Spindle speed max. 12,000 rpm Tool holder ISO 40 31 tool magazine positions Offer number MV-6495

Key data: 850 mm, 700 mm, 500 mm

5-Axis CNC Vertical Machining Center Hermle C40U Dynamic Year of manufacture 2007 Siemens 840D 2-axis NC swivel rotary table Table Ø 420 mm X 850 mm Y 700 mm Z 500 mm Spindle speed max. 18,000 rpm. Tool holder HSK 63 38-speed tool changer Offer number MV-6500

CPU315-2DP 321-7BH00-0AB0 321-1BL00-0AA0 322-1BL00-0AA0 353-1AH01-0AE0 353-1AH01-0AE0 331-7KB02-0AB0

Key data: 500 mm, 1 mm, 500 mm

5-Axis CNC Vertical Machining Center with Pallet Pool Makino D500 Year of construction: 2011 Fanuc 310iS Professional 5 2-axis NC rotary and swivel table Erowa pallet handling system with 4 pallets Table size 400 x 400 mm C-axis 360° A-axis +30° ~ -120° X 500 mm Y 1,000 mm Z 500 mm Spindle speeds 300 – 3,000 rpm. 60-cavity tool magazine Offer number MV-6494

Key data: 1000 mm, 600 mm, 660 mm

Control Heidenhain ... TNC 620 Clamping table surface ... 1300 x 600mm Axis X ... 1000mm Axis Y ... 600mm Axis Z ... 660mm Spindle speed ... 0-10000 rpm controlled axes ... 3 cooling ... 20bar, Grundfos ISO 40 Max. table load ... 700 kg L x W x H ... 3000 x 2700 x 2940mmmm Machine weight... 5500kg Magazine spaces ... 24 Handwheel Heidenhain HR510FS Workpiece Probe Heidenhain TS460 Rinsing gun 10bar The machine has undergone a complete overhaul. More info on request. The machine is ready for the viewings.

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Bosch, Directional control valve -Type: 0 810 091 212 -Pmax: 315 bar -Number: 2x valve available -Price: per piece -Dimensions: 215/46/H75 mm -Weight: 1.9 kg/pc.

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Bosch, Directional control valve -Type: 0 810 091 240 -Pmax: 315 bar -Number: 2x valve available -Price: per piece -Dimensions: 215/46/H75 mm -Weight: 1.9 kg/pc.

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Parker, directional control valve -Type: D1VW8CNSWH75X753 -Pmax: 350 bar -Number: 1x valve available -Dimensions: 237/46/H70 mm -Weight: 2.1 kg

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Parker, directional control valve, unused, original packaging -Type:Art.No.: 4070180000 -Pmax: 350 bar -Number: 2x valve available -Price: per piece -Cardboard dimensions: 330/85/H120 mm -Weight: 5.7 kg/pc.

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Parker, directional control valve, unused, original packaging -Type: D1VW8CNSWH75X753 -Pmax: 350 bar -Number: 3x valve available -Price: per piece -Cardboard dimensions: 290/65/H100 mm -Weight: 2.3 kg

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Parker, directional control valve, unused, original packaging -Type: D1VW20BNSWH75X753 -Pmax: 350 bar -Number: 3x valve available -Price: per piece -Cardboard dimensions: 205/65/H95 mm -Weight: 1.7 kg

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Parker, directional control valve, unused, original packaging -Type: D1VW2ENSWH75X753 -Pmax: 350 bar -Number: 2x valve available -Price: per piece -Cardboard dimensions: 205/65/H95 mm -Weight: 1.7 kg

5/2 way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve valve, 4/3 way valve. -Manufacturer: Bosch, Directional control valve -Type: 0 810 091 207 -Pmax: 315 bar -Number: 2x valve available -Price: per piece -Dimensions: 215/46/H75 mm -Weight: 1.9 kg/pc.

Key data: 1000 mm, 1100 mm, 750 mm

Control Heidenhain ... TNC 530 Clamping table surface ... 1150x900mm Axis X ... 1000mm Axis Y ... 1100mm Axis Z ... 750mm Spindle speed ... 10-18000 rpm controlled axes ... 5 IKZ ... 80bar HSK-A 63 Max. workpiece weight ... 2000kg Magazine spaces ... 60 Machine weight ... 12500kg Total power requirement... 71kVA The machine is in good condition, possible to test under power.

CNC Machining Center Kunzmann WF 7/3 Control: Heidenhain TNC 124 Year of Make: 2010 Internal machine no. 53 Machine from training workshop / as good as new condition Travels: X-axis 600 mm Y-axis 400 mm Z-axis 400 mm Table: 800 x 425 mm Mount: SK 40 Accessories: - Vise - Tools

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: GSL German Standard Lift, directional control valve -Type: 4070150000 EL -Pmax: bar -Number: 3x valve available -Price: per piece -Dimensions: 236/46/H70 mm -Weight: 2.2 kg/pc.

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: GSL German Standard Lift, directional control valve -Type: 4070030000 BK -Pmax: bar -Number: 2x valve available -Price: per piece -Dimensions: 236/46/H70 mm -Weight: 2.2 kg/pc.

CNC Machining Center Kunzmann WF 600 CNC Control: Heidenhain iTNC 530 Year of Make: 2014 Operating hours approx. 55 h Internal machine no. 52 Machine from training workshop / as good as new condition Travels: X-axis 600 mm Y-axis 400 mm Z-axis 400 mm Mount: SK 40 DIN69871 Speed: 1 - 5,000 rpm Accessories - Probes - Vise - Tools

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Parker, directional control valve -Type: D41VW 34 C 4 NJW 75 -Pmax: 350 bar -Quantity: 1x valve available -Dimensions: 240/95/H185 mm -Weight: 10.8 kg

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Parker, directional control valve -Type: D1VW8FNSWH75X753 -Pmax: 350 bar -Number: 3x valve available -Price: per piece -Dimensions: 165/45/H70 mm -Weight: 2.3 kg

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Parker, directional control valve -Type: D1VW20BNSWH75X753 -Pmax: 350 bar -Quantity: 1x valve available -Dimensions: 165/48/H70 mm -Weight: 1.6 kg

5/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block, changeover directional valve, valve, 4/3-way valve, control valve -Manufacturer: Parker, directional control valve, unused, original packaging -Type: D1VW14FNSWH75X753 -Pmax: 350 bar -Quantity: 1x valve available -Cardboard dimensions: 205/65/H95 mm -Weight: 1.7 kg

GENERAL Project No.: 905842 Quantity: 1 pcs. Manufacturer: SW Schwäbische Werkzeugmaschinen Type: BA 442 Control: Siemens Sinumerik one Year of Make: 2022 Condition: Used machine Approx (hrs): 9760 Spindle Approx (Hrs): 4060 DESCRIPTION MILLING Travel in X 200 mm Travel in Y 500 (775) mm Travel in Z 425 mm Max. rapid traverse speed in X/Y/Z 55/70/70 m/min Max. acceleration in X/Y/Z 8/8/12 m/s2 Feed force in X/Y/Z 15000/15000/12000 N Direct displacement measurement system Tool holder HSK 63 Max. speed milling spindle 17500 1/min Max. power at ED 10-40/100% 4x32 kW Max. torque at ED 10-40/100% 4x72 Nm Spindle diameter in the front bearing 80 mm 4 pcs horizontally arranged milling spindle/s Spindle spacing 200 mm Pneumatic tool system control Chain Tool Magazine 4x30 Stations Max. tool diameter 80 mm Max. tool diameter for free neighboring spaces 150 ...

5-axis machining center Hedelius Acura 50 Control: Heidenhain TNC 7 Year of Make: 2025 Spindle hours: approx. 100h Internal machine no. 54 Travels: X-axis 500 mm Y-axis (H / V) 550 / 370 mm Z-axis 550 mm Swivel range +30° - -115° Rotary table Ø 500 x 430 mm Holder: SK 40 DIN 69871 Tool magazine: 55 compartment Spindle speed: 50 - 14,000 rpm Drive power: 22 kW Equipment: - KinematicOpt - 3D Formingstar package - Screen filter coolant system 500l - IKZ 25 bar - Booster pump from 25 to 50 bar - Scraper belt conveyor - Blow-off gun - Rinsing gun - Electronic handwheel HR 510 FS - Infrared receiver M&H - 3D Infrared Probe M&H 25.50 - Laser control system Blum LC50 260 - LTA suction

Excellent condition - Fully operational - Loading / Transport possible! VENTURE 08M CNC - controlled machining center in moving gantry design travels of the axes: X = 3930 mm Y = 1953 mm Z = 300 mm working table: X = 3100 mm (length) Y = 1250 mm (width) Z = 100 mm (thickness) 50 mm (passage height without vacuum cups) CONFIGURATION: V12, H4X/2Y, N1 X-Y 90°, F1-HSK63-9KW, C-AXIS, W8 REAR, W8 SIDE V12 HIGH SPEED 7500 incl. quick change system and spindle clamping Vertical drilling unit (individually controllable with variable speed range). Spindle clamping for safe achievement of drilling depth. F1-HSK63-9 KW Automatic tool change spindle in combination with lateral tool change magazine. Tool holder: HSK63 Tool retraction: automatic Direction of rotation: right/left Speed: 1,250 - 24,000 1/min infinitely programmable C-AXIS AGGREGATE INTERFACE W8 REAR Automatic tool change  ...

Excellent condition - Fully operational - Loading / Transport possible! power: 25.6 kW Air supply: 6.5 - 7.5 bar suction flow rate: 30 m/sec Travels: X-axis: 3060 mm Y-axis: 1080 mm control system: NC 500

Screen diagonal 15.6\", incl. support arm, length support arm to screen 580 mm Auction-ID: A1-45682-3

Screen diagonal 15.6\", incl. support arm, length support arm to screen 420 mm Auction-ID: A1-45682-12

Excellent condition - Fully operational - Loading / Transport possible! machining dimension X: 2,500 mm Machining dimension Y: 1,300 mm Machining dimension Z: 4 - 80 mm Number of milling units. 2 Number of drilling units: 2 Drilling spindles vertical: 72 Drilling spindles horizontal X: 16 Drilling spindles horizontal Y: 4 Hedp Ez Afsh E Sghjdsk Grooving saw: 90° tiltable speed X-axis: 130 m/min speed Y-axis: 80 m/min speed Z1-axis: 50 m/min speed Z2 axis: 27 m/min Speed: 18,000 rpm