for measuring used for sale

RV defective Auction-ID: A1-50256-149

Ryan Overseeder / Project not tested The current technical condition and operation of the machine are therefore not known. The device is offered in its current state, with no guarantee of operation. Please take this into account when purchasing. Auction-ID: A3-46125-12213

Not roadworthy; Mileage not readable - battery empty or defective ; Auction-ID: A1-50080-3

Electric 4-wheel forklift truck, equipped with solid rubber tires and fork carriage with forks. Includes battery charger/electric charging system, 3-phase 220/380 V, 4.5 kVA, output 48 V / 60 A. Machine shows clear signs of wear, paint damage and local rust formation according to age and use. Auction-ID: A3-46126-22077

Petrol engine not tested. Can be operated with pallet fork. Auction-ID: A3-46125-17470

Battery with automatic filling, no marking tires, Bolzoni Auramo 360 rotator, full led work lights, flash light, blue spot Auction-ID: A3-46126-561

RV defective Auction-ID: A1-50256-150

Bolzoni auramo KS18G6A , RAVAS weighing system , blue spot front and rear , Full led work lights , heated cabin , DAFO automatic fire fighting system , Linde Pre-up check computer and flash light Auction-ID: A3-46126-555

Top all-wheel drive Ford Tranit with 4 cylinder 2.5liter diesel engine. Starts immediately, no oil loss, all-wheel drive shifts tip top, all-wheel drive can also be switched on. Interior as shown in the pictures. Formerly active in the Austrian Armed Forces. Austrian road approval or COC papers available Hardly any rust stationed at the military training area and therefore few salt trips. NO RUST PENETRATION - Nowhere ! Last service about 1000KM ago, diesel engine WITHOUT AdBlue ! Current kilometers: 147687 (can still change slightly - still being driven!) Brakes New, Wheel Bearings - New Pickerl valid until 01/2027 Auction-ID: A1-50398-10

Nozzle on PTO : The nozzle and pump have not been tested. The current technical condition and operation of the machine are therefore not known. The device is offered in its current state, with no guarantee of operation. Please take this into account when purchasing. Once working, it can be used for : weed control Treatment of orchards vineyards Crop protection Spraying/humidifying Cleaning with pressurized water Spraying with a lance/spray gun Auction-ID: A3-46125-12209

Redexim Verti-Seed 004-804 not tested The current technical condition and operation of the machine are therefore not known. The device is offered in its current state, with no guarantee of operation. Please take this into account when purchasing. Auction-ID: A3-46125-12214

RV defective Auction-ID: A1-50256-148

Ryan Sod Cutter The machine has not been tested, so we cannot make any statements about the technical condition or proper operation. Sold in its current state as a possible project. Working widths including 18 inches (±46 cm) Petrol engine Self-driving adjustable cutting depth intended for removal/cutting of turf Auction-ID: A3-46125-12211

partly defective Auction-ID: A1-50256-151

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines, fork set -Forklift tines: Type K1790 EA 001 2 pieces/1 pair -Length: 1200 mm -Cross-section: 80 x 40 mm -Photograph: 410 mm (see photos) -Transport dimensions: 1345/590/H110 mm -Weight: 80 kg

Alimenta Newpack Division Thermoform FM100/E-20 HC form fill seal machine (FFS) for mini-portions of jam with fruit parts / marmelade / honey / choco paste., Mini-portions are the ideal, hygienic way to package portions for use in hotels, aboard airplanes, for catering and for single-person households without compromising on quality and freshness. Less packaging material needed thanks to the use of forming material of minimal thickness, even heating up of the material and accelerated forming process for an optimally controlled and optimally distributed wall thickness, minimal punch waste from the low-waste punch unit, volume-saving, overlapping packing configuration when final packaging into boxes or tray., Working principle: cup material supply from the reel, pre-heating the cup material, forming the cup, date coding inside the bottom of the cup, filling the cup (fruit parts possible, C ...

Equipped with: code lock, electric windows, electric seats, automatic transmission, center console, cup holders, air conditioning, Apple CarPlay, tow bar, spare tire, lighting, windshield wipers, reversing camera, tilt-and-tilt roof, heated seats, climate control double-sided, coating in cargo bed, camperchell, alloy wheels, 4x4 Auction-ID: A1-47418-11

Equipped with 4-cylinder Perkins' diesel engine note: drives slowly forward Auction-ID: A1-47391-279

Edition 500 Incl. Air hose with gun Auction-ID: A1-50251-44

Please note: engine failure engine runs irregularly, electric windows and mirrors, mirrors electrically foldable, steering wheel control, cruise control, climate control, multimedia system, 6-speed manual transmission, headliner and interior, heated seats, electric boot lid, tow bar Auction-ID: A1-47418-195

Incl. dust extraction system with double cylindrical filters Pick up is possible by appointment. After the auction closes, you will be contacted to make this appointment. Auction-ID: A1-50251-459

IDEAL 1,700 mm Hydraulic Forklift Bucket – Push-Out Slide – FEM 2A Specifications: Brand: IDEAL Type: hydraulic forklift bucket Connection: FEM 2A Width: approx. 1,700 mm Depth: approx. 1,300 mm Total height: approx. 1,150 mm Dimensions: approx. 1,700 × 1,300 × 1,150 mm Number of hydraulic cylinders: 2 Construction: welded steel Features: Hydraulic push-out slide / push-out wall 2 hydraulic cylinders Hydraulic hoses and quick couplings Hydraulic operation via forklift High steel side panels Reinforced rear construction Steel shovel/wear rim FEM 2A connection for mounting on suitable spoon board Particularities: Suitable for scooping, transporting and controlled unloading of various loose bulk products, including compost, soil, sand, green waste and other bulk goods. The hydraulic push-out system moves the internal rear wall forward, pushing the load ...

MOT expired, engine malfunction light fire code p0304, lighting, electric windows front and rear, electric seats, cruise control, electric door locking, gas tank, spare tube, front towing eyes, leather upholstery, automatic transmission, skylight, Auction-ID: A1-47418-12

Hesston Field queen rear dump forage harvester. Equipped with a 20 m3 bunker, which unloads at the rear. The bunker can tip, and is equipped with a floor chain. A 12 foot (3.66 M) direct cut header is mounted on the front of the shredder, The forage harvester is powered by a 275 hp Detroit Diesel. The roof of the bunker is loose Various documentation is included Auction-ID: A1-47391-284

Equipped with 4 cylinder Perkins engine technically good condition possibility for 3rd hydraulic function Auction-ID: A1-47391-278

Equipped with 6-Cil. \"Ford\" Diesel engine; PTO shaft 540 rpm; 2 double-acting hydraulic valves; lower drawbar; lifting device; front weight set 11 pieces approx. 40/45 kg; with valuation report from 2024; various documents such as maintenance invoices; Auction-ID: A1-47391-41

Valentini APACHE 2T 2500 – Forestry Tiller • Manufacturer: Valentini • Model: APACHE 2T 2500 • Machine type: Forestry tiller • Three-point universal suspension Cat. 2 and 3 • PTO speed: 1,000 rpm • Single-speed gearbox • Reinforced rotor • Rotor diameter: 635 mm • Rotor with size 40 teeth • Teeth made of high-strength and wear-resistant steel Equipment: • Double side gearbox • Valentini-4G gears in oil bath • Transmission and idle side support protection rings • Bearing brackets with special seals • Labyrinth Camp Protection • Central cardan shaft with locking bolt • Tractor-side fork: 1 3/4\" Z20 • Bull bar • Support legs • CE marking Application: • For agriculture, forestry and contractors • For the cultivation and recultivation of forest areas • To prepare land for agricultural use • Suitable for preparing ...

Consists of: Cascade, Series: F-Series, Model: 65F-SSS-B655, Hydraulic Side Shifter, Mounting Class: FEM/ISO Class III (65F), Suitable for Forklifts in the 2.5–5 Ton Class, Nominal Load Capacity: 2,500 kg, Load Gravity: 500 mm, Own Weight: 76 kg, Fork Board Width: 655 mm, Maximum Hydraulic Pressure: 240 bar, Hydraulic Connection: 1 Double-Acting Hydraulic Function, Side Shift: Approx. 200 mm Total (Approx. ±100 mm), fully pre-assembled, can be mounted directly without welding, high visibility for better visibility while working, wear-resistant plain bearings for a long service life, even side shift to the left and right thanks to double-acting cylinder, suitable for conversion to a fork positioner (Fork Positioner) with a conversion kit, width: ± 655 mm, height: ± 600 mm, depth: ± 140 mm Auction-ID: A1-47391-303

2x gas bottle. (PLEASE NOTE! this vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are extra costs involved) Auction-ID: A1-47391-182

Electric windows and mirrors, multimedia system, air conditioning, 5-speed manual transmission, Auction-ID: A1-47418-207

MOT expired 2023-06-26, Electric windows, towbar Auction-ID: A1-47418-170

Ford Model A Tudor Sedan 1930 Fully restored – Very nice condition Very nice and authentic Ford Model A Tudor Sedan from 1930. This characterful classic has been fully restored and is still in a very well cared for condition. Always treated with care and stored indoors. Stored on the road in 2017. The car has the distinctive dark green bodywork with black fenders and original wire wheels. Data: • Year of construction: 1930 • Version: Tudor Sedan • Engine: 4-cylinder petrol • Manual transmission • Complete restoration in 1998 • Annual maintenance carried out until 2017 • Very neat paint and chrome parts • Always stored indoors • Dutch registration (PLEASE NOTE! this vehicle has a license plate registration, when you pick it up you must register it on the spot with a third party or export it, there are extra costs involved) Auction-ID: A1-47418-8

Professional Epson Stylus Pro 9900 large format inkjet printer, developed for high-quality photo, graphic and fine-art prints. Suitable for professional use such as posters, photography, art prints, proofs, presentation material and large format graphic applications. The Stylus Pro 9900 supports media up to 44 inches (1118 mm) wide and uses Epson's UltraChrome HDR ink system for a wide colour gamut and high-quality print. Specifications Brand / Model: Epson Stylus Pro 9900 Model Number: K162A Type: Professional Large Format Inkjet Printer Max Media Width: 44 inches / approx. 1118 mm Max. resolution: up to 2880 × 1440 dpi Ink system: Epson UltraChrome HDR Number of colors: 11 cartridges / 10-color print configuration Power supply: 100–240 V, 50–60 Hz Serial Number: KJF011224 Production date according to label: 21-11-2011 Auction-ID: A1-47446-80

2x Rolls Forbo Siegling Conveyor Belt E 12/2 U0/U10 GSTR green 1x Roll 16062 x 1800 mm 1x Roll 21057 x 1800 mm Applications: Metalworking & Automotive Product data sheet see pictures. Auction-ID: A1-50474-6

Hours reading not readable. working well. incl working charger. Auction-ID: A1-47391-115

Consisting of 3 crate pallets, 3 metal Kruizinga storage bins with lifting eyes and 2 grab storage bins with contents Consisting of cast-in transport anchors, mounting feet, bolts and the like Auction-ID: A1-50251-288

Electric windows and mirrors, cruise control, 6-speed manual gearbox, air conditioning, length of cargo floor 4600mm, width of cargo floor 2050mm, including road plates, tow bar Auction-ID: A1-47418-160

Toyota 4FB15 electric forklift – 1,500 kg – 3,000 mm – 48 V – 1982 – including charger Specifications: Brand: Toyota Type: 4FB15 Year of construction: 1982 Serial Number: 4FB15-11218 Drive: electric, 48 V Lifting capacity: 1,500 kg at 500 mm load centre Lifting capacity: 1,350 kg at 600 mm load centre Lifting capacity: 1,200 kg at 700 mm load centre Maximum lifting height: approx. 3,000 mm Mast: 2-piece Fork length: approx. 1,200 mm Number of wheels: 4 Own weight excluding battery: 2,350 kg Minimum battery weight: 590 kg Operating weight: approx. 2,940 kg or more Dimensions: approx. 3,200 × 1,100 × 2,100 mm including forks Features: 48 V traction battery Pneumatic tyres Lighting Open driver's seat Separate battery charger Particularities: Visible signs of use, paint and rust commensurate with age and use. Condition and remaining capacity o ...

Engine is partly overhauled good working condition Auction-ID: A1-47391-241

YTEF-10 forklift 1000kg electric new Simple forklift with two-part mast and without side shift. 60V battery that is charged at 230VAC.  • Year of construction: 2026 • Own weight: 1600kg • Lifting capacity: 1000kg • Maximum lifting height: 300cm • Maximum working time: 6 hours Auction-ID: A1-47391-112

Electric windows and mirrors, cruise control, steering wheel controls, multimedia system, 6-speed manual, air conditioning, double cabin, tow bar Auction-ID: A1-47418-159

48V battery pack, Forks 1000mm, spoon board 1075mm, plywood mast, side shift, spoon spreader 550/1840mm, blue spot front, blue spot rear, towing eye with pin 25mm, max lifting height 4625mm, max lifting capacity 2000kg Auction-ID: A1-47391-103

Engine does not run well, Electric windows + mirrors, automatic lighting, cruise control, steering wheel control, Multimedia system with Bluetooth and navigation, climate control with zone control, adjustable rear seats, 7 seats, panoramic roof, front fog lights, front parking sensors + rear Auction-ID: A1-47418-211

Please note; no brakes, mast drops, closed box 2100mm, duplex mast, 3rd function, work light, towing eye with pin 30mm, loadrite weighing system, Auction-ID: A1-47391-101

Side shift not working equipped with 3 stage powershift Auction-ID: A1-47391-239

WIFO P46 3-Point Pallet Fork – 1,300 kg – 1,000 mm Spoons Specifications: Brand: WIFO-Anema BV Type: P46 Serial Number: B142270-020 Version: 3-point pallet fork / pallet carrier Maximum capacity: 1,300 kg according to rating plate Own weight: 54 kg according to rating plate Number of pallet spoons: 2 fixed steel pallet spoons Length of spoons: approx. 1,000 mm Center-to-center distance spoons: approx. 590 mm Total height: approx. 710 mm 3-point coupling: category I Mounting: mechanical Construction: Fully welded steel Features: Locking pins CE marking No hydraulic connection required No electrical connection required Suitable for pallets, crates and similar loads Particularities: Year of construction unknown Auction-ID: A1-47391-289

Hydraulic band saw machine with - NC control SIMATIC OP17- material feed single 600mm - max. programmable up to 6000mm - hydr. Saw band tension (36 - 40bar) - motor. Chip conveyor - Emergency stop device - feed roller conveyor 4m Cutting diameter 360 mm Saw blade length 4870 x 41 x 1.3 mm Cutting width 360 mm Cutting speed 11 - 110 m/min Drive saw blade 4.0 kW Height of workpiece support 800 mm Machine weight approx. 2.1 t Dimensions approx. 2.3 x 1.9 x 2.2 m Auction-ID: A7-50523-708

Hours are ascending, age approximately 1990. Auction-ID: A1-50090-14

-For machines 6 – 9 T -Working width 800mm -New Auction-ID: A1-49954-35

In the original case with accessories Auction-ID: A1-50529-652