for measuring used for sale

Electrohydraulic Scissor Fork StackerScissor Pallet Truck, Pallet Pallet TruckTOYOTA / BT Type HTH 10 EFabr. No. 481795 year of manufacture 2005Lifting capacity 1000 kgLifting height max. 800 mmOverall height drained 85 mmFork length 1190 mm- Electric stroke via 12 volts Battery operated- Manual stroke via hand lever as on the pallet truck- TOYOTA Industrial Equipment Europe SARL (Made in France)- Long-stroke hydraulic cylinder- with single roller- Integrated charger (mains voltage 230 Volts, with IEC plug)Net weight 140

Electronic crane scale MWT type 142Fabr. No.: 142571 year of construction 1993Tensile force meter, crane scaleMeasuring range: 2,500 to 80,000 kgSmallest measured value: 20 kgPower supply via 12 volts Cordless suspension shackle for double hooks, anchor hook operation, storage of the measured values and tare via remote control- Memory for measured values (weights)- Printer for measured valuesVery solid and high-quality body made of steelWeight: approx. 200 kg; used

Electric walking forklift, ride-on pedestrian stacker STILL type EGV 14Fabr. No. 330221900092 year of construction 2009Nominal load capacity 1400 kgLifting height 5475 mmFork length 1160 mmTotal length 1930 mmTotal width 860 mmOverall height 2330 mmOperating voltage 24 volt- Triplex mast with 1830 mm Free lift- 689.3 operating hours read- Battery from year of construction 08/2008, type 3 PZS 315 (24Volt / 315Ah)- Automatic charger- New TÜV test UVV (surcharge 150,-- EUR net)Weight 1440 kgGood condition, battery bad. Surcharge

Electric Forklift JUNGHEINRICH Type EFG-V20 MFGE115-450 DZFabr. No. 89.90.74.09 Year of construction approx. 2000Nominal load capacity 1900 kgLifting height 4500 mmFork length 1130 mmFork carriage width 980 mmOverall height 2000 mmOperating voltage 48 volt- triplex mast with full free lift 1400 mm- hydraulic sideshift battery from year of construction 2006 Type 6 EPZS 750 (48 Volt/ 750 Ah) - battery in poor condition- 4-wheel solid rubber - tires, front 200/50-10, rear rear 16x6-8- Hydr. Auxiliary steering- automatic charger Jungheinrich,

Bosch Angle Head Cabinet Tool You are buying a high-quality winding head cabinet machine for anchor production. The area of application mainly concerns anchor production. Manufacturing/production/operating documents are included with the machine. Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!

A form-fill-seal machine Rovema including a multihead weigher Ishida CCW-S-211 is available. Bag dimensions X/Y: 220mm/340mm, packaging capacity: 55 bags/min, operating hours: 35554h. Documentation available. An on-site inspection is possible.

A form-fill-seal machine Rovema including a multihead weigher Ishida CCW-S-211 is available. Packaging capacity: 80 bags/min, bag dimensions X/Y: 250mm/350mm, max. film roll width: 530mm, machine dimensions X/Y/Z: approx. 2000mm/1450mm/1850mm, weight: approx. 1200kg, operating hours: 14607h. Documentation available. An on-site inspection is possible.

From a current exploitation we offer you an xyz. Year of construction: 2024 Condition: young used Original price: 622.500,00 EUR Equipment / accessories / other information: NIR Plus Package QUANTIMETER Yield Measurement Activation NIR Ingredient Determination Corn Cutting length adjustment, automatic Near-infrared sensor (NIR) for PREMIUM LINE Wizard Package Variable attachment drive incl. preparation DIRECT DISC Discharge manifold lighting LED, synchr. schwenkb. w. manifold flap Steering angle sensor Dynamic steering CEMOS AUTO PERFORMANCE Camera system, prepared AUTO FILL trolley filling system with CEBIS display GPS PILOT Ready Digital Package II - CEMIS Machine connect license SAT 900 GNSS receiver SAT 900 GNSS Receiver - SATCOR 15 Networked Documentation License 50 Years of JAGUAR Gutfluss XL PREMIUM LINE professional Counter Blade Universal PREMIUM LINE ...

Corner forming machine

length: 880 mm weight: 60 kg height: 320 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Height=1.9 m, Overall length= 1.3 m, Overall width= 3.5 m, Net weight= 1110 kg,

Height=2.12 m, Overall length= 0.9 m, Overall width= 2.3 m, Net weight= 1110 kg,

Height=2.03 m, Overall length= 0.75 m, Overall width= 2.12 m, Net weight= 815 kg,

Height=2.12 m, Overall length= 0.9 m, Overall width= 2.4 m, Net weight= 1035 kg,

Height=1.26 m, Overall length= 0.5 m, Overall width= 1.7 m, Net weight= 120 kg,

Production line is in good condition

Height=1.8 m, Overall length= 1.9 m, Overall width= 0.85 m, Net weight= 640 kg,

A fully automatic vertical form-fill-seal machine Hassia is available. Packaging materials: laminates/paper films/monofilms, max. bag width: 600mm, max. bag length: 1100mm, max. film width: 1240mm, max. film roll diameter: 600mm, cycle performance (continuous operation): 40 cycles/min, heat-sealing temperature: 92°C. An on-site inspection is possible.

Inv. Num. : 8662 Type: Rondamat 960 Producer: Weinig Generated: 2000 Parameters: Max. Speed: 1500-3000 1/min Grinding wheel diameter: 150/225 mm Grinding wheel drilling: 60 mm

Load capacity: 1600kg, load center: 500mm, motor power: 26kW, travel speed: 20km/h, gradeability: 37%, turning radius: 2000mm, lift height: approx. 4500mm, overall height: approx. 2150mm, weight: approx. 2900kg. The machine requires a new battery. An on-site inspection is possible.

With tooling

Kodak Trndsetter Q800 with developer year 2016. Model TJ1903 developer EL125T In production X speed, 42 plates per hour software

Capacity: 1600 tons Slide stroke: 300 mm Slide stroke length at maximum force: 0,16 mm Distance adjustment between tableand slider: 10 mm Slide stroke number in 1 min: 75 Length of a rod: 920 mm The closed height: 660 mm Table overall dimensions: 940x1200 mm Table height above floor level: 450 mm Slide overall dimensions: 860x910 mm The size of lateral windows: -Height: 560 E5931468 mm -Width: 600 mm Main motor: 110 kW Press overall dimensions: -Length: 5060 mm -Width: 3940 mm -Height above floor level: 5125 mm Press weight: 120 tons

Rheon Cornucopia Type: KN200 Pieces of dough: 10-300 gr. Capacity : 10-60 pieces/min digital control Stainless steel cladding rollable on castors Height: 160cm Width: 80cm Depth: 150cm

Used machine in top condition Edge milling machine for simultaneous upper and lower flush milling of protruding edges such as PVC, ABS, melamine and real wood veneer. Milling of the edge can be carried out on square, round, curved, workpieces with outer and inner radius. The machine is the ideal complement to the edge banding machine B 56, B 560. The two vertically operating HF flush milling motors, 18000 rpm, are equipped with indexable insert knives (R=2 mm). With driving equipment. Pull-out support at the front. Pneumatic excavation. Control panel position : top Total connection: 2 kW Working height or feed table height : 850 mm Workpiece thickness (radius milling): approx. 16-55 mm Workpiece width min. approx. 30 mm Edge thickness: 0.4-3.0mm Inner wheels min. approx. 50 mm Weight approx. : 155 kg Dimensions : approx. 1000 x 750 mm

A vertical form fill and seal packaging machine Goglio for bulk materials including a vibrating chute scale with two chutes is available. Weighing range min./max.: 300g/3000g, accuracy: +/-0.3%, load cell type: HBM PW2 C3/18, max. load: 18kg, scale type: GL 111, packaging dimensions for 1000g: 130mm/80mm/400mm. Machine dimensions X/Y/Z: approx. 2300mm/3000mm/3500mm, weight: approx. 2800kg, control: IBM 7542 industrial computer. The machine is defective. Documentation available. An on-site inspection is possible.

sheet width: 750 mm plate length: 1250 mm plate thickness: 4 mm table surface area: 1600 x 1050 mm no. of strokes: 180 Hub/min max. punching diameter: 105 mm punching pressure: 25 t total power requirement: 4,0 kW weight of the machine ca.: 1,8 t dimensions: 1,9 x 1,9 x 1,7 m Punching and nibbling machine - Digital readout for X and Y axis - Tool cabinet with tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Nominal weight of the falling parts: 750 kg Max. number of blows per minute: 105 Kinetic energy: 1900 kg Distance from an axis of the slider up to bed: 750 mm Cylinder diameter: 600 mm Diameter of the plunger: 630 mm Max. headstock travel: 835 mm Dimensions: -Left-to-right: 3940 mm -Front-to-back: 1430 mm Height above floor level: 3260 mm Weight: -With an anvil-block: 25600 kg -Without an anvil-block: 16600 kg

Pallet fork Fam 4, Dimensions: 2170x150x55 mm

KODAK Magnus VLF MTA Large Format Thermal Platesetter with MCU Multi-Cassette Unit (Four Cassettes) New TH 7 laser (May 2022) with only 1296 laser hours 2400 dpi Z-Speed Panel counter: 258861 Minimum size: 483 x 394 mm Maximum size: 1600 x 2083 mm Material flow from right to left with Prinergy TIFF Shooter Dell PowerEdge 7330 Plate development machine built in 206 Year of Make: 2006

KODAK Magnus VLF MTA Large Format Thermal Platesetter with MCU Multi-Cassette Unit (Four Cassettes) New TH 7 laser (08/2022) with only 2615 laser hours 2400 dpi Z-Speed Panel counter: 395443 Minimum size: 483 x 394 mm Maximum size: 1600 x 2083 mm Material flow from left to right with Prinergy TIFF Shooter Year of Make: 2016 New TH 7 laser (08/2022) with only 2615 laser hours

A continuous Schur flow pack machine is available. Output rate: 30m/min, max. packaging capacity: 80bags/min, min. bag dimensions X/Y: 100mm/100mm, max. bag dimensions X/Y: 450mm/500mm, bag material: PE/CPP/films/laminates, material thickness range: 0.04mm-0.14mm. Weight: approx. 650kg, control system: Siemens Simatic PLC S7-300, operating hours: 256h. Documentation available. An on-site inspection is possible.

This is a LITTLE GEM glass bottle filler for 1 Pint milk bottles round format. The machine cuts and applies with heat sealing the aluminium cap that is done via a fords cutter and capper. This machine can do 1pint and 2 pints. The machine has been running until 2025 and can be sold either as is working condition or fully refurbished . The machine is driven by 1 single motor that is located at the bottom of the machine turning two gears one opposite to the other making this a very robust and easy to maintain system., Capacity: 2000 bottles per hour , Aluminium Cutting: Fords systems , Format: 1 Pint Milk Bottles , Sealing Device: Included , Construction: Fully Stainless steel on product connection Parts , Filling Type: Mechanical valves that the bottles lifts the rubbers up and the milk flows through, one the mechanical vacuum is activated this helps to avoid over, Collection Table: Inclu ...

pressure: t plate thickness: 5 mm sheet width: 40 mm total power requirement: - kW weight of the machine ca.: - t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Lift height: 3680mm, free lift: 160mm, load capacity: 5000kg, load center: 500mm, sideshift carriage: 1310mm, sideshift: +/-100mm, fork length: 1600mm, cross section: 130mm/60mm, battery weight: approx. 2200kg. Machine dimensions Y/Z: approx. 1400mm/3700mm, operating hours: approx. 3416h. Documentation available. An inspection on site is possible.

A horizontal flowpack pillow bag machine (flowwrapper) Alpha Pack is available. Packaging capacity: approx. 20-30 packages/min, max. roll width: 600mm, max. product height: 140mm, max. product length: 1000mm, min. product length: 600mm, product width range: 50mm-280mm, max. film diameter: 300mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible.

Mould grinding machine OTT - KG Up to 150 mm wide with Stepless Transport Carpet Profile strip and semi-round mouldings

Transnorm Rising falling Incline with forerun belt conveyor GF 6000+800-600-500 RA2449 Technical data: Conveyor length (NL): 6800 mm (800 mm forerun + 6000 mm incline) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R27 DT80N4/BMG/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6800 ( 6000 + 800 ) Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eu ...

weight max. in kg: 2000 kg stroke: 3,3 mm fork length: 1200 mm battery: 48V / 575Ah weight of the machine ca.: 4,5 t dimensions of the machine ca.: 1,2 x 3,5 x 2,19 m Electric forklift with charger. Only 2500 operating hours New battery in 2017 3.3-meter duplex mast 2000 kg lifting capacity 2.19-meter clearance height With side shift and fork adjustment Very good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Air steam die forging hammer : Capacity : 16 tons, Nominal mass of drop parts : 16000 kg, Impact energy : 400 KJ, Ram stroke : 1500 mm, Ram stroke per minute : 20, Distance clear between guides : 1180 mm, Ram dimensions front to back : 1500 mm, Die holder dimensions front to back : 1600 mm, Bottom die impression to floor distance : 500 mm, Steam/air pressure : 0.7-0.9 MPa, Overal dimensions : - Floor space : 4500 x 2450 mm, - Height above floor level : 7920 mm, Mass of anvil block : 325 tons, Total weight of hammer : 425 tons.

Biscuit forming machine Janssen FM128 K580S used Janssen FM 128K580S pastry forming machine with 600mm working width including 2 forming rollers. The machine is mobile on rollers, completely covered with stainless steel sheets. The machine is in good visual and technical condition and can be viewed and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. - 60cm sheet size - With 2 forming rollers (optionally extra forming rollers) - With additional heating - Stainless steel cladding - Automatic sheet metal feeding - For trays: 60x40cm, 60x80cm or 60x100cm - Heating: 2 x 2000W - Connected load: 380 volts

Transnorm Rising falling Incline with arch and forerun belt conveyor 1000+10700+1000-600-500 RA2459 Technical data: Conveyor length (NL): 12700 mm (1000 mm forerun + 10700 mm incline + 1000 mm arch ) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): 0,5 Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 12700 ( 1000 + 10700 + 1000 ) Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eurodr ...

A horizontal flow pack packaging machine (tubular bag machine) SKS is available. Packaging capacity: 30-120 packages/min, film roll width: 220mm-500mm, bag length range: 120mm-500mm, bag width range: 60mm-200mm, bag height range: 5mm-80mm. Machine dimensions X/Y/Z: approx. 4500mm/1150mm/1600mm, weight: approx. 800kg. Documentation available. An on-site inspection is possible.

Load capacity: 1800kg, drive wheels: single, rated power: 42kW, lift height: 3290mm, load center: 500mm, mast model: 5V15C33, operating hours: approx. 1116h. Documentation available. An on-site inspection is possible.

STILL electric forklift mod. R50/15 3-wheel – CE compliant – used with new V24 battery - Flow q.li 15 - Sideshift - Riser mm. 3500 - Battery with 1800H - Complete with charger - COMPLETE WITH MANUAL AND CE DECLARATION