128,989 used machines on RESALE, but how to find them? Machine Search
Line for forming cevapcici and cevapi (grinder with mixer, portioning device and belt transporter)
We offer Peri Maximo 270 and 330 elements 455.67m² as follows: All elements are cleaned, checked and partly covered with new, original Peri Finply formlining. All elements sealed with zinc phosphate coating corrosion. New value PL 2025 approx. 255105,00€ Special net price 97327,00€ 16 Element MX 15 FPly 330x240 6 Element MX 15 FPly 330x120 New Plate 3 Element MX 15 FPly 330x90 New Plate 2 Element MX 15 FPly 330x90 3 Element MX 15 FPly 330x60 3 MZ-Elem. MXM 15 FPly 330x60 new plate 3 MZ-Elem. MXM 15 FPly 330x60 1 Element MX 15 FPly 330x45 New Plate 3 Element MX 15 FPly 330x30 New Plate 7 Element MX 15 FPly 330x30 3 I-corner MXI 15 FPly 330x50/20 new plate 1 I-corner MXI 15 FPly 330x60 11 Element MX 15 Fply 270x240 New Plate 16 Element MX 15 Fply 270x240 3 Element MX 15 Fply 270x120 New Plate 8 Element MX 15 Fply 270x120 3 Element MX-2 15 FPly 270x60 ...
ILLIG STAL80 Trim Press, age 1988:- Technical data ILLIG STAL 80 : Punching table area max. 1000 x 510 mm Material width max. 800 mm Infeed length 20 - 400 mm Stroke height 200 mm Mold height 272 mm Part height (positive and negative) max. 100 mm Number of strokes (infinitely variable) 25 - 130 /min Trimmed Parts are stacked through the Punch Tool The Skeletal Waste is fed directly into the Grinder ILLIG RS75 Under the Trim Press Grinder, Motor 8.3 kW, age 1995
Key data: 6100 kg, 970 mm
Refurbished Beche KGH 8.0 forge hammer (built in 1980) The hammer was completely overhauled in Germany. The RAM (Schabotte) is from 2013. Control System: 2025 Description of the modernisation works: Hydraulic drive - Completely disassembled in 2024, cleaned, control valves replaced New control system - Siemens S7-1500F PLC control system with touch panel RAM (U-frame) - Contact surface ground - Insert adjusted - New wedge manufactured and hammered in Test run - Hammer was assembled in 2024 and tested in 2025 Technical description: Working capacity: 80 kJ The height max. 600 mm (without swallows) The height min. 200 mm (without dovetails) Bear depth: 810 mm Bear weight: 6100 kg Scabot weight: 105000 kg Total weight: 130700 kg Total height: 7.3 m above floor level Scope of delivery: •Hammer •Documentation The Modernisationword were well ...
We offer a Doka Framax 270 wall formwork 334.66m² complete with accessories. The formwork has been cleaned, checked and is immediately ready for use. Partly new Finply formlining. Partly new accessories. Suitable for higher-value applications. SB 2/3 possible without any problems. New value Doka price list 2025/ 2026 = 264.019,00€ Special net price 94.915,00€ Pcs. Description 3 Framax Xlife element 2.40x2.70m new panel, Doka rental warehouse 5 Framax Xlife-Element 2.40x2.70m Doka rental warehouse 12 Framax Xlife element 1.35x2.70m new plate, Doka rental warehouse 38 Framax Xlife-Element 1.35x2.70m Doka rental warehouse 8 Framax Xlife-Uni-Element 0.90x2.70m Doka rental warehouse 5 Framax Xlife-Element 0.90x2.70m Doka rental warehouse 3 Framax Xlife-Element 0.90x2.70m Doka rental warehouse, new plate 8 Framax Xlife-Element 0.60x2.70m Doka rental war ...
Framax Xlife-Uni-Element SCC 0.90x2.65m with 70% discount - custom order Original price: 2685,00€/pc Discount: 70% Special net price: 805,50€/pc 8 units in stock Accessories available on request. Formwork completely cleaned, checked and sorted. Formwork lining fair-faced concrete class 2/3 possible without any problems. Ready to use, suitable for higher-value applications. If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055
We offer a Doka Framax Xlife plus 330 package 225.72m². Formwork cleaned, checked. Formlining SB 2/3 Original Doka Xlife formlining, ready for immediate use. New value PL 2025/ 26 Doka 232312,00€ Special net price with 80% discount = 46462,00€ 16 589292600 Framax Xlife plus Element 0,90x3,30m 24 589293600 Framax Xlife plus Element 0.75x3.30m 24 589294600 Framax Xlife plus Element 0.60x3.30m 32 589295600 Framax Xlife plus Element 0.45x3.30m 24 589296600 Framax Xlife plus Element 0.30x3.30m Offer only valid while stocks last. Subject to prior sale. If you have any questions, please call 0049 176 70044689 Mr. Bdcker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becke ...
weight max. in kg: 2500 kg stroke: 3200 mm fork length: 1000 mm Drive: Gas Side shift: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 4,25 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Fully Automated Forging Hammer Line (2023) SCHULER KG H 6.3 B (63 KJ) Line Description The complete line consists of the following machines: Tilting Device, Stahlmann Step Conveyor, Stahlmann Cold conveyor belt Conductive Heating System, Stahlmann, E89, 2023 Transfer Gripper Hot Conveyor Belt with Lifting Device 2 Forging robot, Kuka, KR 30-3F, 2010 Safety Fence with Safety Doors Short-Stroke Die Forging Hammer, Schuler, KG H 6.3 B, 2023 Discharge / Extraction Robot, Kuka, KR 150/2, 2010 Output Station, Stahlmann, 2010 Technical Details (2023) Short-Stroke Die Forging Hammer SCHULER KGH 6.3B Machine identification data Name: Short-Stroke Die Forging Hammer Model: KGH 6.3B Machine number: 119820 Year of manufacture: 2023 Operational parameters Working capacity max. 63 kJ Max. impact frequency 98/min Max. usable impact rate ...
Key data: 5600 kg, 810 mm
Fully Automated Forging Hammer Line (2009) LASCO HO-U 800 (80 KJ) The complete line consists of the following machines: Tilting device, Stahlmann Step conveyor, Stahlmann Induction heating unit, ABP, EBS 345-W, 2009 Quick-release conveyor Automation unit, Lasco, 2009 2 Forging robots, Kuka KR 30-3F, 2013 2 Bases, weight each: 336 kg Conveyor belt with lifting device, safety enclosure with doors Top pressure drop forging hammer, Lasco, HO-U 800, 2009 Picking robot, Kuka, KR 150/2, 1998 Dispensing station, consisting of: Discharge conveyor and blow-off control, Manufacturer Schramm Technical Details (2009) Short-Stroke Die Forging Hammer LASCO H-OU 800 Machine identification data Name: Short-Stroke Die Forging Hammer Model: HO-U 800 Machine number: 00.08175 Year of manufacture: 2009 Operational parameters Working capacity max. 80 ...
Key data: 3700 kg, 775 mm
Fully Automated Forging Hammer Line (2004) BECHE KGH 5B (55 KJ) Line Description The complete line consists of the following machines: Tilting device, Stahlmann Conductive heating system, Stahlmann, D400G21/39000 XSH, 2004 Frako reactive power compensation Automation system, Lasco, 2009 2 Forging robots, Kuka, KR 30-3F Conveyor belt with lifting device Control cabinet with higher-level control system Short-stroke drop hammer, Beche, KG H 5.0B, 2004 Discharge robot for removal, Kuka, KR 30/2, with bucket, 1999 Technical Details (2004) Short-Stroke Die Forging Hammer BECHE KGH 5B Machine identification data Name: Short-Stroke Die Forging Hammer Model: KGH 5.0B Machine number: 155002 Year of manufacture: 2004 Operational parameters Working capacity max. 55 kJ Max. impact frequency 99/min Max. usable impact rate 55/min Maximum ...
- Hand & foot control - integrated ambos - solid substructure Specifications: - Hammer weight: 40 kg - Lifting height: 230 mm - Projection: 240 mm - Cylinder Ø: 140 mm - Motor power: 4 kW - Voltage: 400 V - Dimensions WxHxD: 700 x 1900 x 1200 mm - Weight: approx. 900 kg
Janssen Moulding Roller for K12 K600 pastry forming machines Diameter: 58.5 cm
Key data: 3700 kg, 775 mm
Fully Automated Forging Hammer Line (2002) BECHE KG H 5B (55 KJ) Line Description The complete line consists of the following machines: Tilting Device, Stahlmann Step conveyor, Stahlmann Cold Belt Conveyor with Lifting Device Conductive Heating System, Stahlmann, E89, 2019 Heated Conveyor Belt Forging Robot, Lasco / Kuka, KR 60-3F, 2019 Central Control Cabinet Safety Fence with Safety Doors Short-Stroke Die Forging Hammer, Müller Weingarten (Beche), KG H 5B, 2002 Extraction robot, Kuka, KR 60-3F, 2019 Discharge station, Stahlmann Technical Details (2002) Short-Stroke Die Forging Hammer BECHE KGH 5B Machine identification data Name: Short-Stroke Die Forging Hammer Model: KGH 5B Machine number: 127050 Year of manufacture: 2002 Operational parameters Working capacity max. 55 kJ Max. impact frequency 99/min Max. usable imp ...
Key data: 2700 kg, 790 mm
Semi-Automated Forging Hammer Line (2001) BECHE KG H 4B (40 KJ) Line Description The complete line consists of the following machines: Tilting device, Stahlmann Step conveyor, Stahlmann Cold conveyor belt Conductive heating unit with 3 modules, Schneider, KEA, 2002 Frako reactive power compensation unit; - Cooling system is required - Hot conveyor belt Impulse blower Short-stroke drop hammer (forging), Beche, KGH 4B, 2001 Technical Details (2001) Short-Stroke Die Forging Hammer BECHE KGH 4B Machine identification data Name: Short-Stroke Die Forging Hammer Model: KGH 4B Machine number: 127050 Year of manufacture: 2001 Operational parameters Working capacity max. 40 kJ Max. impact frequency 98/min Max. usable impact rate 41/min Max. ram stroke 790 mm Weights Total machine weight approx. 58,000 kg Anvil bed 46,000 kg ...
Combination machine Manufacturer Mubea Type KBL100 5-fold combined Flat steel shears 150x19mm Profile steel shears e.B angle iron 160x7mm or 100x12mm Bar steel shear 70mm round Hole punching Jack 16mm All information to the best of our knowledge, but without guarantee!
Key data: 2700 kg, 855 mm
Line Description The complete line consists of the following machines: Tilting Device, Stahlmann Step Conveyor, Stahlmann Cold Belt Conveyor Conductive Heating System, Schneider, KEA 303, 2002 Transfer Conveyor Short-Stroke Die Forging Hammer, Beche, KGH 4B, 1994 Discharge Conveyor with Blow-Off Control, Stahlmann, 2001 Gas furnace, Stahlmann Eccentric Press for Hot Trimming, Ruhrmann, EVR 125 H Technical Details (1994) Short-Stroke Die Forging Hammer BECHE KGH 4B Machine identification data Name: Short-Stroke Die Forging Hammer Model: KGH 4.0B Machine number: 941 5435 Year of manufacture: 1994 Operational parameters Working capacity max. 40 kJ Max. impact frequency 98/min Max. usable impact rate 48/min Max. ram stroke 855 mm Weights Total machine weight approx. 58,000 kg Anvil bed 46,000 kg Drive head compl ...
Janssen Moulding Roller for K12 K600 pastry forming machines Diameter: 58.5 cm
Janssen Moulding Roller for FM128 K4 pastry forming machines Diameter: 23,9cm
Kalmeijer Forming Roller for Kalmeijer KGM machines Overall Length: 47cm Roller: 25cm
Kalmeijer Forming Roller for Kalmeijer KGM machines Overall Length: 47cm Roller: 25cm
Kalmeijer Forming Roller for Kalmeijer KGM machines Overall Length: 47cm Roller: 25cm
Moulding roller pastry roller Nicholas Overall Length: 23.9cm for pastry moulding machine Kalmeijer
1250 x 2500mm TLF 2000w Laser STOPA Sheet storage, SheetMaster, ToolMaster, SortMaster Year: 2005
Air steam die forging hammer : Capacity : 16 tons, Nominal mass of drop parts : 16000 kg, Impact energy : 400 KJ, Ram stroke : 1500 mm, Ram stroke per minute : 20, Distance clear between guides : 1180 mm, Ram dimensions front to back : 1500 mm, Die holder dimensions front to back : 1600 mm, Bottom die impression to floor distance : 500 mm, Steam/air pressure : 0.7-0.9 MPa, Overal dimensions : - Floor space : 4500 x 2450 mm, - Height above floor level : 7920 mm, Mass of anvil block : 325 tons, Total weight of hammer : 425 tons.
all stainless steel hopper capacity 270L die width 400 mm usable die surface 370 x 130 mm maximum volume per stroke ± 1,47 kg maximum 50 strokes / minute total power 8 kW air consumption ± 300 L / min. mobile with mould trolley variable speed 3x400v 50hz with bridge breaker dimensions (l x w x h) : ± 3.140 x 1.900 x 2.570 mm weight 1200 kg PLC control
Hamburger forming machine, Sind, NEW Capacity: 2100 pieces / hour Hamburger forming diameter: 90 mm to 120 mm
all stainless steel belt width 600 mm to form meat balls from 6 to ± 80 gr suitable to put in line with a forming machine (VM 400) adjustable speed mobile dimensions (l x w x h) : ± 1.300 x 700 x 1.500 mm
Hamburger forming machine, Sind, NEW Capacity: 1000 pieces / hour Hamburger forming diameter: 90 mm to 120 mm
Pastry moulding machine Kalmeijer KGM biscuit moulding machine Pastry moulding machine Type: Kalmeijer KGM with 2 forming rollers 10 baking trays thickness of the dough figures is adjustable Dough hopper, forming roller, dough feed roller is easily removable for cleaning Easy to use The trasnport belts for the sheets can be folded in and out Machine requires little space Machines can be driven on rollers Dimensions: Height: 122cm Width: 170cm Depth: 52cm
We offer Peri Maximo 270 elements 227.49m² as follows: All elements are cleaned, checked and partly covered with new, original Peri Finply formlining. All elements sealed with zinc phosphate coating corrosion. New value: 156.833,50€ Special net price 83.368,15€ Pcs. Description 16 Element MX 270 x 240 New Plate 10 Element MX 270 x 120 New Plate 8 Element MX 270 x 90 New Plate 10 Element MX 270 x 60 New Plate 6 Multi-purpose element MXM 270 x 60 8 Element MX 270 x 45 New Plate 10 Element MX 270 x 30 New Plate 6 Inner corner MXI 270 x 50/20 6 Outer Corner MXA 270 x 45 New Plate 5 Wall Thickness Compensation WDA MX 270 x 10, Alu 4 Wall Thickness Compensation WDA MX 270 x 6 4 Wall Thickness Compensation WDA MX 270 x 4 Total: 75.588,15€ Accessories 90 Anker MX 15 , 20-30 20 MAR 85 compensating latches 2 mesh boxes 80 x 120-K, lacquered 30 Stacking ...
Janssen Pastry Moulding Machine Type: FM128 K4 with 1x speculoos roller Extra rollers available at extra cost Band width: 23.5cm with heating Height: 145cm Width: 80cm Depth: 50cm
Servo drive, servo card, output module, CPU card, input processor, power supply unit, control card, input card, controller, converter, controller -Indramat: AC Servo Line Former NAM 1.2-08 -Component: from a DMT CD 480 lathe -Dimensions: 320/105/H390 mm -Weight: 12.9 kg
Pastry moulding machine Type: Kalmeijer KGM with 2 forming rollers (speculoos + . ) thickness of the dough figures is adjustable Dough hopper, forming roller, dough feed roller is easily removable for cleaning Easy to use The trasnport belts for the sheets can be folded in and out Machine requires little space The machine is in need of overhaul Dimensions: Height: 122cm Width: 170cm Depth: 52cm
Fork positioner with separate sideshift, hydraulic fork adjustment, sideshift, side lift, forklift blade, tine carrier -Manufacturer: SE Fahrzeugwerke, type 1/9953 -Load capacity: 860 kg -Tine length: 1000 mm -Tine width: 595 mm to 1800 mm -Dimensions: 1240/915/H610 mm -Weight: 272 kg
Forklift Battery Charger, Industrial Charger, Forklift Battery Charger, Industrial Charger -Handover: in the current state as viewed -Housing: self-made -Power: V/A -Connection: 220 volts -Dimensions: 200/405/H400 mm -Weight: 20 kg
Balkenzwinge 20 – galvanized Used - ready for immediate use! Galvanized beam clamps for support in beams and edge and ceiling formwork Length: 30 cm Height: 35 cm 6.9 kg Price: € 32,00 356 pieces in stock forming support 20 – galvanized Used - ready for immediate use! Galvanized beam clamps for supporting beams and edge and slab stop ends Length: 30cm Heigth: 35cm 6.9 kg Price € 32,00 356 pieces on stock
New Generation Polymer Formwork Panels, 18mm New generation formwork panels for maximum efficiency. The polymer panels can be nailed or cut like conventional formwork panels. No deformation, rot or rust possible. The panels are more durable than any other wooden formwork panel, even under the toughest working conditions. - Formwork plate made of polymer plastic - Weight of the plate 32kg - Dimensions 1.25 x 2.50m - Recyclable - € 20,55 per m2 New Generation Polymer Plywood, 18mm New generation formwork panels for maximum efficiency. The polymer panels can be nailed or cut like traditional formwork panels. No deformation, rot or rust possible. The panels are more durable than any other wooden formwork panel, even under the toughest working conditions. - Polymer Plywood - Sheet weight 32kg - Dimension 1,25 x 2,50m - Recyclable - € 20,55 per sqm
Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Motor: Thrige-Titan type MTL 11-7 D -Motor: 24 V 3 kW 3000 rpm -Tank: 200/290/H230 mm -Dimensions: 210/320/H510 mm -Weight: 42 kg
Forklift motor with gear, electric motor, direct current motor, traction motor, drive motor -Voltage: 22 volts -Power: 5.2 KW -Speed: 2800 rpm -Shaft: Ø 28 mm -Number: 2x available -Price: per piece -Dimensions: 290/H230 mm -Weight: 26 kg
Forklift motor with gearbox, electric motor, DC motor, traction motor, drive motor -Voltage: 23 volts -Power: 3 kW -Speed: 1705 rpm -Drive motor for: Steinbock forklifts -Dimensions: 375/230/H200 mm -Weight: 25 kg
Welding edge former, welding edge former, weld seam preparation, welding edge forming machine, edge milling device, edge milling machine, mobile milling machine -Bevel length: max. 20 mm -Dimensions box: 460/360/H355 mm -Weight: 24 kg
Wedge snowplow, snow plug, dozer blade, clearing blade, snowplow -Working width: max. 1700 mm -Plow height: 820 mm -with: Spring-loaded flap drive-over system -Plow: mechanically adjustable -for: attachment to forklifts or similar -Transport dimensions: 2195/900/H1100 mm -Weight: 350 kg
Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor -comes from: a Still forklift -Drive: 24 V 2 kW -Dimensions: 370/500/H350 mm -Weight: 82 kg
Forklift battery charger, industrial charger, forklift battery charger, industrial charger -Power: 24 volts -Power: 65 A -Connection: 230 volts -Dimensions: 480/450/H785 mm -Weight: 70 kg
Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Voltage: 24 V -Power: 2 kW -Manufacturer: Kostov -Serial number pump: KAD 2419 -Dimensions: 142/170/H390 mm -Weight: 9.9 kg
maximum number of results exceeded
please refine your search
500 € 
