for measuring used for sale

Measuring carriage, measuring element LEHNERT® FERTIGUNGSMESSTECHNIK S210.037 stroke: 4.5 mm New ! Dimensions: 96 x 84 x 14 mm

Measuring carriage, measuring element LEHNERT® FERTIGUNGSMESSTECHNIK S230.008 stroke: 2 mm New ! Dimensions: 95 x 46 x 14 mm

Measuring slide, measuring element LEHNERT® FERTIGUNGSMESSTECHNIK S210.038 stroke: 4 mm New ! Dimensions: 91 x 81 x 14 mm

Measuring slide, measuring element LEHNERT® FERTIGUNGSMESSTECHNIK S210.001 stroke: 14 mm New ! Dimensions: 131 x 80 x 14 mm

Measuring Slide, Measuring Element LEHNERT® FERTIGUNGSMESSTECHNIK S210.003 stroke: 14 mm New ! Dimensions: 109 x 80 x 14 mm

Measuring Slide, Measuring Element LEHNERT® FERTIGUNGSMESSTECHNIK S210.027 stroke: 14 mm New ! Dimensions: 134 x 80 x 14 mm

Internal micrometers, micrometer screw, internal diameter, internal precision measuring device, cylinder gauge, -Measuring range: 35-60mm -Dimensions: 115/450/H60 mm -Weight 1.6kg

Internal micrometers, micrometer screw, internal diameter, internal precision measuring device, cylinder gauge, -Handover: in the current condition as seen -Condition see pictures -Measuring range: 18-150mm -Dimensions: 280/450/H60 mm -Weight 2kg

Internal micrometers, micrometer screw, internal diameter, internal precision measuring device, cylinder gauge, -Measuring range: 18-150mm -Dimensions: 280/450/H60 mm -Weight 2kg

Measuring range module, controller, memory module, PLC controller, expansion module -Manufacturer: Siemens, Simatic S5 measuring range module -Type: 6ES5498-1A51 -Number: 5x module available -Price per piece -Dimensions: 50/20/H15 mm -Weight: 0.1 kg/pc.

Measuring range module, controller, memory module, PLC controller, expansion module -Manufacturer: Siemens, Simatic S5 measuring range module -Type: 6ES5498-1A11 -Number: 27x module available -Price per piece -Dimensions: 50/20/H15 mm -Weight: 0.1 kg/pc.

Stop for chop saw, pull saw, stop and measuring system -Manufacturer: elumatec, stop and measuring system with digital display -Inclusion: Bosch profile -Length unit: 4280 mm -Price: complete -Dimensions: 4710/510/H635 mm -Weight: 72kg

Convergence measuring tape, band extensometer, extensometer -Manufacturer: Interfels, convergence measuring tape type KM-15 -Reading accuracy: 0.01 mm -Accessories: see photos -Dimensions transport box: 560/220 / H180 mm -Weight: 6.8 kg

Measuring range X 500,Y700,Z400 mm Measuring head Renishaw MH 20i Software MCosmos-2 v4.2.R1

Pneumatic single-point measuring device, transducer MASSI, MASS INDUSTRY WERDAU Type 7.1167/599 measuring range: 100 μm free stroke: 0 - 12 mm in wooden box suitable pneumatic high-pressure gauge see ME641 ! unused ! Dimensions (packaging) : 220 x 200 x 100 mm

Pneumatic single-point measuring device, transducer MASSI, MASS INDUSTRY WERDAU Type 7.1167/641 Measuring range: 100 μm Free stroke: 0 - 12 mm in wooden box suitable pneumatic high-pressure gauge see ME641 ! unused !br Dimensions (packaging) : 200 x 180 x 80 mm

encapsulated length measuring system HEIDENHAIN LC 181 341 240-01 gauge length: 240 mm ( ML 240 mm ) sampling unit: AE LC 181 344 619-01 used, tested ! Dimensions ( length measuring device ): 373 x 85 x 40 mm

Length measuring system CARL ZEISS JENA IAL-K ( IALK ) measuring room: 230 mm approx. 0.8 m Connection cable used, tested ! dimensions (without cable): 400 x 60 x 95 mm

Messsystem fuer Polar 155 EMC Duxon SMD / Measuring System for Polar 155 EMC Duxon SMD Serial-No. 022 490 Messsystem fuer Polar 155 EMC Duxon SMD Measuring System for Polar 155 EMC Duxon SMD Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Control WPC 2040/3 Measuring range x/y/z 3000 mm / 1200 mm / 1500 mm Measurement uncertainty 40 μm+L/30,

Welding Table, Straightening Table, Straightening Panel, Work Table, Clamping Table Measuring Plate, Measuring Table PAGUS Work surface: 355 x 260 mm Working height: 65 mm Dimensions: 355 x 260 x 65 mm

Caliper, workshop caliper, 2 pcs MASSI 0 - 750 mm / 0 - 750 mm ( with measuring tips ) TGL 9252 mm - scale pitch: 0,10 mm for internal and outdoor measurement with fine adjustment 0 - 750 mm beak length: 180 mm dimensions ( caliper ): 965 x 255 x 18 mm 0 - 750 mm ( with measuring tips ) beak length: 200 mm tip length: 78 mm dimensions ( caliper ): 970 x 310 x 18 mm used, tested ! Dimensions (packaging): 1000 x 320 x 60 mm

Caliper, workshop caliper, 2 pcs MASSI 0 - 750 mm / 0 - 750 mm ( with measuring tips ) TGL 9252 mm - scale pitch: 0,10 mm for internal and outdoor measurement with fine adjustment 0 - 750 mm beak length: 180 mm dimensions ( caliper ): 965 x 255 x 18 mm 0 - 750 mm ( with measuring tips ) beak length: 200 mm tip length: 78 mm dimensions ( caliper ): 970 x 310 x 18 mm used, tested ! Dimensions (packaging): 1000 x 320 x 60 mm

Description: Measuring plate 1000 x 600 x 140 mm Including base cabinet and vernier height gauge on the measuring plate Attention: without paints, varnishes and liquids weight approx.: 300 kg, Approx. Onsite Dimension. (l x w x h): 1,000 x 630 x 1,400 mm

Measuring portal with touch probe, Fabr. RENISHAW, granite measuring plate, size: approx. 1000x1000 mm, with evaluation hardware

encapsulated length measuring system HEIDENHAIN LC 483 557 649-09 gauge length: 470 mm ( ML 470 mm ) sampling unit: AE LC 4x3 575 669-08 New, with documents ! Dimensions ( length measuring device ): 610 x 59 x 19 mm Dimensions ( packaging ): 710 x 105 x 75 mm

encapsulated length measuring system HEIDENHAIN LC 483 557 649-09 gauge length: 470 mm ( ML 470 mm ) sampling unit: AE LC 4xx 559 308-05 used, tested ! Dimensions ( length measuring device ): 610 x 59 x 19 mm Dimensions (packaging): 915 x 100 x 80 mm

encapsulated length measuring system HEIDENHAIN LS 186C 336 963-16 gauge length: 540 mm ( ML 540 mm ) New, with underlays ! Dimensions ( length measuring device ): 670 x 87 x 38 mm Dimensions ( packaging ): 920 x 140 x 105 mm

encapsulated length measuring system HEIDENHAIN LC 185 689 697-07 gauge length: 740 mm ( ML 740 mm ) New, with underlays ! Dimensions ( length measuring device ): 865 x 85 x 37 mm Dimensions ( packaging ): 990 x 135 x 100 mm

Description: Measuring tables 3 pieces, each with dial gauge Micrometer screws Internal micrometer screws 7 pieces DIATEST bore measuring inserts Application angle Depth caliper Approx. Onsite Dimension. (l x w x h): 400 x 300 x 500 mm, weight approx.: 30 kg

Description: 1 x measuring range 8 to 10 mm 1 x measuring range 12.5 to 16 mm each with calibration ring Approx. Onsite Dimension. (l x w x h): 350 x 200 x 80 mm, weight approx.: 5 kg

Description: 1 x with 3 measuring ranges: ,10 to 12.5 mm, 12.5 to 16 mm and 16 to 20 mm, including calibration rings 1 x with 2 measuring inserts: 20 to 25 mm and 25 to 35 mm, with calibration ring each in wooden box Approx. Onsite Dimension. (l x w x h): 400 x 300 x 70 mm, weight approx.: 5 kg

Description: Travel distances: X: 3406 mm Y: 815 mm Z: 1049 mm Table dimensions: 4000 x 2000 mm The machine is equipped with a digital display from the manufacturer 3D-LASERTEC The machine has been serviced annually and is still in a very accurate measuring range Attention: the articles on the measuring plate are not included in the scope of delivery weight approx.: 8,000 kg, Approx. Onsite Dimension. (l x w x h): 4,000 x 2,700 x 2,400 mm

This 3-axis measuring machine was manufactured in 2009. The SHIN NIPPON KOKI MM 2500-5012 offers expansive dimensions and capabilities, with an effective distance between columns of 3500mm and axis movements of 5000mm on the x-axis, 2500mm on the y-axis, and 1200mm on the z-axis. It features a maximum feed rate of 10,000 mm/min, supported by AC servo motors, ensuring precise and rapid positioning. The expansive measuring range makes the SHIN NIPPON KOKI MM 2500-5012 machine we have for sale ideal for large-scale precision measurements. For more information on this highly capable machine, please contact us today.

Description: x-path 460 mm y-path 500 mm z-path420 mm 3D coordinate measuring machine program: DMIS Renishaw PH 6 measuring probe HP Compaq 6005 Pro Microtower Accessories Approx. Onsite Dimension. (l x w x h): 1,000 x 1,000 x 1,700 mm, weight approx.: 350 kg

Table length: 1 mm Table width: 1 mm Movement (X) axe: 1 mm Movement (Y) axe: 1 mm Movement (Z) axe: 1 mm Metal cutting ToolingFARO - Platinum P08 MACH-ID 8661 Make: FARO Type: Platinum P08 Year: 2007 High accuracy measuring arm Working area 2400 mm 6 Degrees of freedom probe Precision up to 0,020 mm Adaptable 3D measuring technology Length:1200mm Width:800mm Height:400mm Weight:500kg

Description: predominantly MAHR/MITUTOYO, approx. 25 pieces, various measuring rods, further details on the measuring lengths: see photos of the nameplates Approx. Onsite Dimension. (l x w x h): 400 x 300 x 100 mm, weight approx.: 6 kg

Measuring range 1000,1200,600 mm Measuring Head type VAST XXT Software CALYPSO 2017 Version 6.4.02

Measuring scraper 150 mm, still original welded in plastic foil with artificial leather case, with mm and inch - pitch, Steinless - Hardened, with thread table on the back for Metr.- ISO and Whitworth. Smaller batches can also be dispensed. 5.00 €/piece, stock approx. 25 pieces

Year of manufacture 09/1992, with new measuring meter type MZ 2000 and screen. Recoil plate 2000 x 4000 mm X trail approximately 3300 mm Y way approx. 1200 mm Z-way approx. 1200 mm Total weight approx. 3.5 t reinforced column 160 mm square

Leitz Wetzlar measuring microscope with cross slide and micrometer screws Extensive setting possibilities. Cross table, dislocation 0.01mm shift of the optics via micrometer screw possible. Dhxmkdfga Size approx. 40x Degree scale in optics via micrometer screw rotatable to the reference line Special price

Torque/angle/preload Analyzer Testing and measuring instrument Brand: BLM Type: 5040 Number of pieces: 2 More info: Please see photos All information without guarantee

Roundness measuring instrument, BALLIGKEITS - & OVALITAETSMESSGERÃ?T Manufacturer: Philip Hafner with DigitameÃ?anzeige HEIDENHAIN Condition: used All information without guarantee

Leitz Coordinate Measuring Machine Leitz PMM-G 50.30.20 Dimesnion: 5000x3000x2000 Machine is in excellence working condition.

Ultrasonic measuring and testing unit suitable for pipes up to 200 mm in diameter Manufacturer: ConPro Type: DMCON 200 Built: 2008

Sell a Thermovac TM21 vacuum meter with high vacuum sensor according to Pirani. (measuring range 500 bar to 1000mBar)

Measuring and control ring for control of three-point internal micrometers Diameter 50mm Diameter 100mm Diameter 150mm Diameter 200mm More available

Measuring Machine Fabr. MDM Mecatronics Type Catrim 3Machine -No: 1901192 Year 1992Measuring plate size: 1400 x 800 mmMeasuring range X: 650 mmMeasuring range Y: 470 mmMeasuring range Z: 320 mmTravel X-axis: 1000 mmTravel Y-axis: 600 mmTravel Z-axis: 400 mmDeviation to max. Travel distance: + 0.01 mmConnected load: 500 VAAir pressure 6 bar: 120 L / minTable dimensions: 950 x 1800 mmWith- Sensor setused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

For sale we offer a measuring and weighing system for packages from Bedal. It is a perfect system for all package acceptance or shipping. It can be used for example.B: In shipping at industry, wholesale or e-commerce, fulfillment service providers (e..B. forwarding agents, logistics), or at parcel reception points (e.B. courier services). Package dimensions: Min. BxWxH 10x10x4 cm Max. BxWxH 43x41x48 cm undressed max: LxWxH 75x41x48 cm Tolerance: LxWxH 1.0 x0.5 x 0.5cm Weight: 0.25kg: 0.05Kg (50g) / 25-32kg : 0.075kg (75g) Parcel Kiosk is an economical solution for weighing and dimensioning packages. It is certified by the international organization OIML. Automating packet measurement improves efficiency and saves resources. Thanks to the Parcel Kiosk system, you can be sure that accurate weight and dimensions are read and that your company is protected from errors an ...

Thyssen measuring plate / control plate made of natural hard rock Length: 3000 mm Width: 1500 mm Thickness: 300 mm Flatness tolerance according to DIN 876/0 Target value 16 μm Actual value 13.3 μm Identification number: 14286 2 x T-groove with base 6 x Wenzel Precision roll-off trestles Concentricity tester with height adjustment heavy design With T-groove stones High accuracy due to backlash-free rolling bearings Roller trestle can be adjusted in height for diameter compensation. RRP Pair 1890,-€ Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us.