for gas used for sale

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45449-3629

3 PIECES 24V 375Ah batteries from former Linde Service Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45449-1155

For lithium batteries from 82-410Ah REMA Battery Connector 220V plug Auction-ID: A1-45449-3592

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45449-3655

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: - Former Linde full-service device - Next service due in 734 hours - UVV valid until 02/2027 - Triplex mast with full free lift - 3rd valve, sideshift - Semi-cab with windshield wipers - LED front work light - Blue safety light at the rear - Comfort seat with lumbar support and seat heating - Tyres at the front only 10%, new possible on request Auction-ID: A1-45449-91

Charger 48V 100A with REMA battery plug and 16A wall plug Loading onto trucks no problem Auction-ID: A1-45449-3677

For lithium batteries from 82-410Ah REMA Battery Connector 220V plug Auction-ID: A1-45449-3589

For Linde Lithium Batteries REMA Battery Connector 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-45449-3420

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45449-3651

new and unused for batteries with 600-900Ah possible without 16A and Rema plug Delivery by freight forwarder possible on request. Auction-ID: A1-45449-8012

Battery from former Linde Service Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45449-1024

REMA Battery Connector 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-45449-3570

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45449-3648

3 PIECES 24V 375Ah batteries from former Linde Service Very good performance measured at 24.99, 25.05 and 25.46V Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45449-1132

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45449-3652

Charger 24V Ah with REMA battery plug and 220V Schuko wall plug Loading onto trucks no problem Auction-ID: A1-45449-3551

Battery from former Linde Service 830x630x630mm Voltage in idle mode uncharged 51.38 V and thus still very good. Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-45449-1076

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45449-3656

REMA 160A Battery Plug 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45449-3300

REMA 160A Battery Plug 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-45449-3382

Charger with battery plug and wall plug Loading onto trucks no problem Auction-ID: A1-45449-3638

REMA 160A Battery Plug 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-45449-3351

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/-K665xBd38A - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 21/05/2019 48V 775 Ah, very good performance measured with 49.9V - Triplex mast with full free lift - 3rd valve, sideshift - Roof pane - Side fall-out protection (can be easily dismantled) - LED front work light - LED work light at the rear - Warning light orange - Comfort seat Auction-ID: A1-45449-237

REMA Battery Connector 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-45449-3572

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/F_cbkyU1IrY - Former Linde full-service device - Next service due in 878 operating hours - UVV valid until /2027 - Facelift model with tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd valve, sideshift - 4. Additional valve free for fork adjuster - Full cabin with heater and windshield wipers - StVZO lighting with turn signals for road approval - LED front work light - LED work light at the rear - Warning light orange - Safety light at the rear - Comfort seat with lumbar support and seat heating Auction-ID: A1-45449-216

• Ford Transit E-Transit electric panel van • Year of manufacture 2022 / Registration date: 29.12.2022 • 100% electric – no diesel, no petrol • Power 135 kW (184 hp) • Automatic transmission • Rear-wheel drive • Mileage approx. 60,800 km • Vehicle class N2 (3,900 kg gross vehicle weight) • Colour: Yellow (typical commercial vehicle) • 3 seats • 5 doors (incl. rear doors) • Large cargo space volume – ideal for commercial / transport / trade • Modern infotainment system with large display • Navigation system available • Electric windows • Central locking • Ready to drive Condition / Defects • Rear bumper (slight scratches) • Rear door handle is missing (rear!) • Interior with signs of wear • Seat cushion damaged (crack / wear) Contact: Julia Lorz– Surplex E-mail: j.lorz@tbauctions.com Phone: +49  ...

HAVE A GDY SIR; WE VE NEW UNUSED NAPIER NA 295 TURBOCARGER AS COMPLETE. PLS FIND SPEC AT BELOW. INLET HAS 4 HOLES NAPIER: 295 FRAME LETTER: JH SPECIFICATION: J793 SERIAL NO.: 710083 MAX SPEED: 31000RPM MAX TEMP: 650 C. ALTERNATION NO.: 13678910 SUPLIED ON 28-10 - 2013 AIR FILTER ELEMENT DTLS 75155/248179/2 EJ5385 Issue 4 IT IS STOWED AT ORIGINAL WOODEN BOX. NEVER USED. READY TO TRANSPORT. IF YOU'VE ANY FURTHER QUESTIONS PLS DO EMERGENCY HRSITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba Best regards Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

FOR SALE NEW UNUSED ABB VTR 254-11 COMPLETE TURBO CHARGER IN WOODEN BOX. TO WHOM IT MAY CONCERN; WE VE NEW UNUSED ORIGINAL ABB VTR 254-11 COMPLETE TURBO CHARGER WITH ORIGINAL PACKAGE IN WOODEN BOX AT OUR STOCK. PLS FIND SPECT AT BELOW.. TYPE VTR254-11 HT 841632 t Mmax 680 C t Bmax 650 C N Mmax 523 N Bmax 497 SFUS01 YOB 2015 WEIGHT 650KG EX OWNER SUPLIED FROM WARTSILA. MADE IN SWITZERLAND. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba BEST REGARDS; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Agilent Gaschromatograph model 6890/G 1530A Detector FID/EPC, Injector S/SL /EPC HP-IB and Jetdirect card upon request with Autosampler and Agilent Chemstation

Gas heated tempering furnace, make VEI type: KA_TRU_GB external dimensions (w x h x d): 1700 x 2050 x 3900 mm useable dimensions (w x h x d): 600 x 850 x 1800 mm temperature: max. 600°C circulation fan: 4,0 kW loading weight: 3.000 kg gross

type RMG 980 200/100 Recon Part number: 1214 0250 Please note: We have various other RECON parts from different manufacturers and types available. We like to send you our current store reserves.

MWM TCG 2016 V 12 Exchange motor / short block with cylinder heads (biogas) Bücker + Essing short block with cylinder heads - crankcase in Exchange (tested according to manufacturer's specifications and repaired) - crankshaft in Exchange including new storage (tested according to manufacturer's specifications and repaired) - piston Squisch new -Liners with Coke wiper ring new -Connecting rods in Exchange including new storage (tested according to manufacturer's specifications and repaired) - cylinder heads in Exchange (tested according to manufacturer specifications and repaired) -Wheel drive including timing chest cover -Oil pump new including oil suction pipe -Oil pan -Oil cooler bundle (new) oil filter (new), closed oil circuit -Camshaft new incl. storage -Torsional vibration damper new -Flywheel housing and flywheel -including paint (RAL 5010) The here offered motor is ...

SUB: FOR SALE... USED 2 SET BBC COMPLATE VTR 714E-32 T/C AT TURKEY... EMERGENCY HAVE A GOOD DAY. .WE HAVE USED 2 SET BBC COMPLATE VTR 714E-32 T/C AT TURKEY. AND READY TO LOAD ON TRUCK. OUR T/C SPECIFICATION AS BELOW MOY 1988 SERIAL NO.: X. 140769 / 140770 V 01113 R - H 04010 W 05206 E 03010 U 03 I 01800 T 01100 BOTH T/C ARE IN VERY GOOD CONDATION. IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurlubay BEST of regards; Aliaga marine services E-mail: info@aliagamarine.com PHN/fax: + 90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

rotary drum dimensions: length: 6000 mm inside: Ø 1600 mm outside: Ø 2280 mm max. temperature: 1200°C heating: gas eating power 2700 kW melting capacity: 6000 kg / h The plant consists mainly of: - furnace - hydraulic power pack and tilting mechanism - heating system - carousel with molds - charge box - measuring and control system

MWM TCG 2016 V 16 Exchange motor / short block with cylinder heads (biogas) Bücker + Essing short block with cylinder heads - crankcase in Exchange (tested according to manufacturer's specifications and repaired) - crankshaft in Exchange including new storage (tested according to manufacturer's specifications and repaired) - piston Squisch new -Liners with Coke wiper ring new -Connecting rods in Exchange including new storage (tested according to manufacturer's specifications and repaired) - cylinder heads in Exchange (tested according to manufacturer specifications and repaired) -Wheel drive including timing chest cover -Oil pump new including oil suction pipe -Oil pan -Oil cooler bundle (new) oil filter (new), closed oil circuit -Camshaft new incl. storage -Torsional vibration damper new -Flywheel housing and flywheel -including paint (RAL 5010) The here offered motor is ...

RECON Part number: 1214 1745 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Gas filling device / scale with rolling landing Manufacturer: Ninnelt International GmbH Type: CTE 110 In good condition!

FOR SALE... OVERHAULED TURBOCHARGERS ABB VTR 254-11 & BBC VTR 214-11 TO WHOM IT MAY CONCERN; WE VE BELOW LISTED OVERHAULED & REPORTED TURBO CHARGERS AT OUR STOCK. READY TO TRANSPORT AND USE... ABB VTR 254-11 HZTL 428765P2 nNmax 523 nBmax 497 tMmax 680 C tBmax-650 C SFUSO1 YEAR OF BUILT 2010 MADE IN SWITZEWRLAND BBC VTR 214-11 NoHT 399285 their 635 Tmax 680 V 01113 R 012 H 04109 W 12206 E 03221 U 023 YEAR OF BUILT 2012 MADE IN SWITZERLAND IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CIONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Gas filling facility with weighing technology / scale manufacturer: Ninnelt International GmbH Type: What 110 p In good condition!

Complete gas measuring station / gas detector device, including Dräger Polytron 2 IR Ex 334 etc. used Manufacturer: Dräger Type: Polytron 2 IR Ex 334 Condition: Used - top condition Price: The total price of the complete system is only 50% compared to the sum of the usual market prices of all assembled used parts. The complete gas measuring device is mounted on a mounting plate of a control cabinet and consists of: - Mounting plate 110 x 170 cm - Air suction pump - Gas measuring device Dräger Polytron 2 IR Ex 334 - Brooks variable area flow meter 1355 / D1D4A1Z5BA00 - Switching amplifier Pepperl u Fuchs KFD2-SR2-Ex1.W - 2 Pepperl u Fuchs KFD2-STC4-EX2 transmitter power supplies The air is sucked in by the pump and fed into the gas detector and measured. Function guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. Since we  ...

Cylinder head for MWM TBG 620, TCG 2020 needed, not overhauled. Can we get over on request. Quantity: On request. Please note: We have various other parts of from different manufacturers and types available.

FOR SALE COMPLETE T/C ABB VTR 454-32 TO WHOM IT MAY CONCERN; WE ARE ABLE TO SUPPLY USED COMPLETE T/C ABB VTR 454-32 AT TURKEY PLS FIND SPECIFICATION T7C AT BELOW. TYPE VTR 454-32 HT 833511 N of Saad 290 Nbmax 276 t Saad 580 tbmax 550 YOB 2005 SWITZERLAND IF YOU'VE ANY QUESTIONS PLS DO NEED HESITATE TO CONTACT WITH US Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info@aliagamarine.com PHN/fax: +90 232 618 03 85 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

FOR SALE... 2 SET T/C TO TCR 18-42065 YOB 2010 AT TURKEY HAVE A GOOD DAY SIR. WE VE 2 SET COMPLETE T/C TO TCR 18 - 42065 AT OUR STOCK. PLS FIND TURBO CHARGER SPECT AT BELOW. TYPE: TCR 18 - 42065 WORK NO: 7642160 / 7642161 SPEED: 37300RPM T MAX: 650C. YOB: 2010 IF YOU INTEREST PLS DO NEED HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurluba BEST of regards; Aliaga marine services E mail: info@aliagamarine

MWM TCG 2016 V 12 Exchange unit with complete motor and generator overhauled on basic frame Payment by invoice warranty Bücker & Essing GmbH assumes the warranty exclusively for the delivery volumes supplied by it. A warranty for damages that are not directly related to the delivered and performed thing, as well as a warranty for consequential damages, are expressly not assumed. The warranty is assumed for a further 12 months at the most or until 8000 operating hours have been reached after commissioning, whichever of the two cases occurs first. Regardless of the commissioning date, the maximum warranty period is 15 months after delivery. The warranty case must be notified immediately in writing. Warranty claims can only be asserted if the commissioning and maintenance have been carried out and documented in accordance with the manufacturer's regulations. Commissioni ...

MAN 2876 LE302 gas engine (biogas) 190KW (also as 210KW-Version) It's a replacement engine for various biogas CHP. Overhauled according to manufacturer guidelines and RAL quality seal(maintenance level R3). 1 year warranty - education, and installation and service engine and optional for CHP. Please contact us for a quotation. We have other Exchange engines (2848 with 250KW and 2842 370KW) and AT cylinder heads, intercoolers, turbochargers, etc. and other components and spare parts for MAN gas engines in stock.

MAN 2848 LE322 gas engine (biogas) 250KW It's a replacement engine for various biogas CHP. According to one manufacturer guidelines and according to RAL quality seal repaired (maintenance level R3). 1 year warranty - education, and installation and service engine and optional for CHP. Please contact us for a written offer. We have other replacement engines (2876 with 190KW and 2842 370KW) and AT cylinder heads, intercoolers, turbochargers and other components and spare parts for MAN gas engines in stock.

Further information on request

MAN 2842 LE322 gas engine (biogas) 370KW It's a replacement engine for various biogas CHP. According to one manufacturer guidelines and according to RAL quality seal repaired (maintenance level R3). 1 year warranty - education, and installation and service engine and optional for CHP. Please contact us for a written offer. We have other replacement engines (2876 with 190KW and 2848 250KW) and AT cylinder heads, intercoolers, turbochargers and other components and spare parts for MAN gas engines in stock.

The ZAKMET FIRECUT CNC 1325 13000 X 2500 gas plasma cutter was produced in 2011. The machine is equipped with Hypertherm EDGE'Pro digital control. The burner's working area is 13,000 mm long and 2,500 mm wide. The running elements of the cutter are lubricated with the Memolub 3.0 central lubrication system. Technical data of the plasma burner: - machine working area (L x W x H): 13,000 x 2,500 mm (additionally 700 mm) x 200 mm - maximum table load: 15 kN / m2 - machine supply voltage: 3x400V AC 50 Hz - central lubrication: Memolub 3.0 - minimum temperature of the working environment: +5 degrees C - maximum temperature of the working environment: +60 degrees C - machine dimensions (L x W x H): 14500 x 5500 x 2000 mm Plasma cutter equipment: - CNC control: Hypertherm EdgePro - ventilated section table: 1550 x 2600 mm - 9 segments - gas burner: type MS 3452 \ 250-PM (x2) - ...