128,598 used machines on RESALE, but how to find them? Machine Search
Pile feeder – separating head 4 buckles Belt delivery Touchscreen panel Automatic setting
A GUK slitter rewinder and buckle folding machine is available. Infeed paper width: 210mm, folding capacity: 320 sheets/min, min. forming range: 60mm/105mm, max. forming range: 210mm/340mm, cutting tolerance at 300 sheets/min: +/-1mm, max. roll diameter: 600mm, max. roll length: 4000mm. Documentation available. On-site inspection is possible.
Long bending machine, with the following equipment: - 1 sharper rail 20°, offset, radius 1 mm for the upper beam - 1 insert rail 10/100 mm and 14/100 mm each for the bending beam - 2 foot switches for 2-man operation - S-Touch control with graphical profile display - 21.5" LCD touch color monitor with high-resolution graphics - Motorized depth stop 8-1000 mm - F-Geometry - within the EU with 32 amp plug with 5 m cable Machine has been repaired, checked, cleaned by a professional and is fully functional. Test run was carried out. Working length: 4040 mm Sheet thickness max. steel: 1.5 mm Sheet thickness max. aluminium: 2.0 mm Sheet thickness max. VA: 1.0 mm Back gauge (min.): 8 mm Back gauge (max.): 1000 mm Colour: blue/grey Total power requirement: 400 V Dimensions: 5325 x 2232 x 1924 mm Weight: 5000 kg Upper beam stroke (opening width): 140 mm Plate thickness ...
Cross folding machine Specifications : Pile feeder - separating head 6 motorized buckles 1 knife Noise hood Batch counter LCD touch-screen control Belt delivery Formats : 558x850 – 128x148 mm
on behalf of a customer GUK Folding Machine FA 21/4 Cartonac 2000-2 further information on request
Cross folding machine Specifications : Pile feeder - separating head 4 motorized buckles 1 knife Gate fold Noise hood Batch counter LCD touch-screen control Belt delivery Formats : 558x850 – 128x148 mm
Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1045-650-500 RA1366 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1045 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency co ...
Mobile Sword Folding Machine MS 45 Sword folding mechanism for folding cross fractures. Mobile and infinitely height-adjustable. Suitable for coupling with the first or second pocket folder. Blade unit can be rotated by 180°, which allows folding from above or below. Infeed width max. 45 cm / min. 12 cm Infeed length max. 33 cm / min. 10 cm
Lippert Belt Conveyor Folding Switch track 1360-750-600 RA1590 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1360 mm Frame width (NB): 750 mm belt width (GuB): 600 mm height (BH): 105 mm Belt height: 550 mm total height: 1070 mm basic dimensions: 1170x900 mm Tilt height difference: 300 mm Conveying speed (v m/s): 0,05-1,5m/s Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: conveyor belt motor: 50Hz V380-500, kW 0.075 / 0.37 / S1 Tilting motor: 50Hz V220/400, kW 0.55 ...
2018 Folding Carton Line Longitudinal Seam Carton: max. 1,150 x 600 mm min. 75 x 55 mm min. 45 x 55 mm (with small carton device) Fold-bottom carton: max. 1,150 x 600 mm min. 146 x 80 mm 4-point erecting carton: max. 1,150 x 680 mm min. 120 x 110 mm 6-point erecting carton: max. 1,150 x 630 mm min. 250 x 130 mm with BELKHOFF control system BAUMER HHS Xmelt gluing system Rolling and drying tunnel TÜNKERS EAS 480 output station, right, 2019 in production available: 10/25 located: Germany
Material thickness range: 0.6mm-10mm, sheet width min./max.: 2x700mm/2x1000mm, sheet length min./max.: 500mm/700mm, max. production speed: 1000 boxes/h, registration accuracy: +/-1mm, machine dimensions X/Y: approx. 6200mm/2950mm, weight: approx. 1000kg. Includes a pressure belt. Documentation available. An on-site inspection is possible.
Key data: 4020 mm, 1 mm
with material thickness adjustment, hydraulics on the left side of the machine, without roller shears, bending beam with removable attachment rail approx. 8mm, 3 stop fingers, control on the swivel arm, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length: 4020 mm Sheet thickness max. steel: 1.5 mm Sheet thickness max. aluminium: 2.5 mm Sheet thickness max. VA: 0.8 mm Back gauge (max.): 1000 mm Projection: 1000 mm Colour: blue Total power requirement: 16 A Approx. space required: 6000 x 2000 x 1900 mm Weight approx.: 5000 kg Upper beam stroke (opening width): 200 mm without roller scissors Number of stands: 5 pieces Bending angle (max.): 145 degrees Machine Number: 0040-01
max. format 78 x 120 cm Year of construction 2012 Fully Automatic Paper Folding Machine Computer control with touch screen Navigator Control Pallet feeder with Vaculift and Vacubelt 4 fold pockets in the parallel fold section Automatic folding pocket adjustment Automatic folding roller adjustment Knife shaft cassette 2 folding swords in the crossfold section Automatic folding blade adjustment 1 more fold pocket after the 1st cross break Palamides alpha 500 Stacking Delivery Delivery date: immediately from stock Price on request. We supply and install worldwide.
Size: 820 mm Equipments: Rotary feeder RFH-82 1.station: 6 folding pockets 82 cm Automatic pocket setting 2.station: 4 folding pockets 66 cm automatic pocket setting 3.station: 2 folding pockets 56 cm Automatic pocket setting Stacking delivery SBP-46+ MKE+VE Touchscreen-Monitor, MCT-control-system
Width 50 cm Year of manufacture 1997 Flexible sword folding unit Self-control Mobile substructure Delivery date: short-term Price on request. We supply and install worldwide.
Width 78 cm Year of manufacture 2001 MC Control Round stack feeder Vacubelt 6 fold pockets in the parallel fold section Motorized fold pocket adjustment Downstream knife shaft Noise Insulation Hood Shed display Delivery date: immediately from stock Price on request. We supply and install worldwide.
SPECIFICATIONS: Installed power: 2.5 HP Machining on both sides at the same time RPM: 12,000 rpm
Offer 25290 Specifications: - Max. working width 3040 mm - max. material thickness at 40 kg / mm² strength 2 mm - Bending angle adjustment selectable 6 - 135 ° - Largest opening width / stroke of the upper beam 250 mm - Height adjustability - bending beam 50 mm - the lower beam 50 mm - Upper bolster drive 400 V / 0.37 kW - Bending beam drive 400 V / 0.75 kW - Manual backgauge - Split goat's foot bending splint - Space requirement approx. W 4000 x H 1400 x D 1200 mm - Weight approx. 3500 kg
Width 66 cm Year of manufacture 2004 Pallet feeder PFH 66 Tremat Sheet Separation System Double Suction Wheel 4 fold pockets in the parallel fold section Automation Kit II Automatic folding pocket adjustment Automatic folding roller adjustment Downstream knife shaft 2 folding swords in the crossfold section 1 more fold pocket after the 1st cross break Shed display SAK without compressor New folding rollers and bearings in parallel fold Machine condition: cleaned and checked Price on request. We supply and install worldwide.
Width 56 cm Built in 1993 Round stack feeder Counting device PCS 100 1st station: 4 fold pockets 56 cm Downstream knife shaft 2nd station: 4 fold pockets 56 cm Downstream knife shaft Noise Insulation Hoods Shed Display SAK 56 without compressors / air supply Delivery date: immediately from stock Price on request. We supply and install worldwide.
Width 76 cm Year of construction 2000 Flat pile feeder with Vaculift and Vacubelt Counting device MPC 6 fold pockets in the parallel fold section Downstream knife shaft 2 folding swords in the crossfold section Noise Insulation Hood Standing sheet delivery SAP 46 L Delivery date: immediately from stock Price on request. We supply and install worldwide.
Size: 500 mm Equipments: 2 parallel fold 1 cross fold sheet width: max: 500mm, min: 105mm, cross folding: max: 500mm, min: 182mm, perforation: max: 500mm, min: 105mm, sheet length: max. 648mm, min. 174mm. Speed max. 180 m/min., suction head w ith a rotary feeder
Size: 540 x 760 mm Equipments: 4-buckles cross folder parallelfold crossfold Technology: touch & work memory folding types: 17 standard-typs of fold preprogrammed - saveable jobs: 200 memories for repeat orders 1.folding unit: 4 buckles + knife 2.folding unit: 2 buckles knife: full automatic sheet size:max. 540x760mm; min. 120x172mm - fold length:1. buckle: min. 58mm all other buckles: min. 35mm paper weight: 40-250g/sqm pile height: 650mm speed: max. 40.000 cycles/h power: 400V/50Hz - 2,5kW dimensions: 2.700x1.050x1.650mm weight: 1.050kg (without conveyor)
Heidelberg Stahlfolder Ti 52/6/4 K with gluing year 2008 Feeder 1 unit 6 buckles 2 unit 4 buckles 1 knife Gluing Device good condition
Specifications: - Machine for the production of longitudinal folds on the edges - square or rectangular longer channels and - Number of roller shafts with folding rollers 15 pcs - Material thicknesses from 0.5 - 0.63 mm - Duct dimensions from 80 x 80 mm - up to 100 x 100 mm - from duct dimensions 100 x 100 mm - Material thicknesses 0.5 to 1.0 mm - Throughput speed 15 m/min - Pneumatic connection - Drive 400 V / 3 kW -with: - E. - Footswitch - Duct baffles - Separate lubrication device - Space requirement approx. W 5400 x H 1200 x D 800 mm - Weight approx. 950 kg
sheet width: 1270 mm plate thickness: 2.0 mm daylight opening: 48.0 mm daylight opening: 150 mm ohne Segmente bending angle max.: 0 - 135 ° work height max.: 900 mm weight of the machine ca.: 465 kg dimensions of the machine ca.: 1620 x 1070 x 1280 mm Furnishing: - Swivel bending machines with segm. Upper, lower and bending beam - Universally usable bending machine for sheet metal works and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending possibilities - Optimum price-performance ratio - Quick and easy bending process using the bow handle - Non-slip rubber covering on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for ...
sheet width: 1050 mm plate thickness: 1.0 mm daylight opening: 95.0 mm angle adjustable from - to: 0 - 150 Grad total power requirement: manuell weight of the machine ca.: 180 kg range L-W-H: 1320 x 790 x 1050 mm characteristics - Universally applicable bending machines for plumbing and repair shops - Simple pivoting movement of the bending beam using a bow handle - Easy adjustment of the upper beam for efficient work - High upper beam for producing high-edged profiles - The piano inserts in the upper, lower and bending beam result in a large number of bending options - Cassettes and special profiles with opposite bends are with these Models easily feasible Scope of delivery : - Segmented upper, lower and bending beam - bending segments 25 | 30 | 35 | 40 | 45 | 50 | 75 | 100 | 150 | 2 x 250 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2020 mm plate thickness: 2,0 mm daylight opening: 124 mm bending angle max.: 0 - 135 ° work height max.: 930 mm total power requirement: von Hand kW weight of the machine ca.: 1.010 kg dimensions of the machine ca.: 2,75 x 0,56 x 1,26 m characteristics - Easy to use swivel bending machine - Flat guide for exact movement of the upper beam - Manually adjustable bending angle using a scale - Robust welded steel construction, designed for heavy use - Large opening width for processing tall workpieces - Optionally with back gauge for series work - Quick and easy bending process using a bow handle - Workpiece clamping by means of a large lever The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 1020 mm plate thickness: 2,5 mm daylight opening: 48 mm bending angle max.: 0 - 135 ° total power requirement: von Hand kW weight of the machine ca.: 285 kg dimensions of the machine ca.: 1,35 x 0,82 x 1,14 m Furnishing: - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending options - Optimal price-performance ratio - Quick and easy bending process using a bow handle - Non-slip rubber coating on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing high-edged profiles scope of delivery - Segmented upper cheek - manual backgauge - bending segments 2 ...
sheet width: 1020 mm plate thickness: 2.5 mm daylight opening: 48.0 mm daylight opening: 150 mm ohne Segmente bending angle max.: 0 - 135 ° work height max.: 900 mm weight of the machine ca.: 340 kg dimensions of the machine ca.: 1350 x 820 x 1300 mm Furnishing: - Swivel bending machines with segm. Upper, lower and bending beam - Universally usable bending machine for sheet metal works and repair shops - Robust construction in a modern design - Easy adjustment of the upper beam using a foot pedal - Hands are free for the workpiece - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending possibilities - Optimum price-performance ratio - Quick and easy bending process using the bow handle - Non-slip rubber covering on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for t ...
sheet width: 2020 mm plate thickness: 2,0 mm daylight opening: 122 mit Segmente mm bending angle max.: 0 - 135 ° work height max.: 930 mm total power requirement: von Hand kW weight of the machine ca.: 1020 kg dimensions of the machine ca.: 2,75 x 0,56 x 1,26 m characteristics - Segmented upper beam for a large number of bending options - Universally applicable bending machine for plumbing and repair shops - High upper beam for producing high-edged profiles - Quick and easy bending process using a bow handle - Easy adjustment of the upper beam for efficient work - The bending angle is set using a scale - Individually removable segments for bending boxes - Large opening width for processing large workpieces - Robust construction in a modern design scope of delivery - Segmented upper cheek - Biegesegm. 25 | 30 | 35 | 40 | 50 | 75 | 100 | 150 | 200 | 300 | 500 | 510 mm The data for this ...
sheet width: 1020 mm plate thickness: 2,0 mm daylight opening: 48 mm bending angle max.: 0 - 135 ° work height max.: 900 mm total power requirement: von Hand kW weight of the machine ca.: 285 kg dimensions of the machine ca.: 1350 x 820 x 1140 mm Furnishing: - Segmented upper and bending beam for a wide variety of bending options - Clamping by means of a foot pedal - Hands remain free for optimal positioning of the sheet - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending options - Optimal price-performance ratio - Quick and easy bending process using a bow handle - Non-slip rubber coating on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing ...
Width 72 cm Year of construction 1992 Pallet feeder with suction head 4 fold pockets in the parallel fold section 2 folding swords in the crossfold section 1 more fold pocket after the 1st cross break Noise Insulation Hood Downstream knife shaft Shed display Delivery date: immediately from stock Price on request. We supply and install worldwide.
GUK FA 21/4 S2 SVA/730 stand-alone leaflet folding machine, 4 folding pockets, sheet format unfolded: min. 60 x 90 mm, max. 215 x 320 mm, smallest folding 15 mm, recommended paper weight 50-70 g/m², automatic drum suction feeder SVA/730, PCE barcode reader, double sheet control, output up to 460 folds/min., infinitely variable drive, electrical connection 400V/3Ph/50Hz, rated power consumption 1.76 kW, machine footprint approx. 1650 x 1075 mm (LxW), machine height approx. 1470 mm, machine net weight approx. 300 kg, machine in mobile version on wheels
Key data: 8000 mm, 3 mm
Machine is in stabillier welded construction with 9 columns, 9 clamping cylinders and 36 coupling joints K38 mounted on a base frame The machine has the following equipment: CNC 8000 Control with Touch Screen TFT Color Display 17 Inch Attachment rail, brush table, upper beam with water seam groove Oil filling, fastening and levelling material, emergency stop rail via the Full length of the machine, integrated emergency stop operation in the foot pedal for upper and lower Bending beam, 2nd foot pedal for 2-man operation, upper bolster protection 2 short-part clamping fingers Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length: 8000 mm Sheet thickness max. steel: 3.0 mm Sheet thickness max. aluminium: 4.0 mm Sheet thickness max. VA: 2.0 mm Back gauge (max:.) 1150 mm Back gauge (min.): 150 mm Colo ...
MBO T 530-2 2nd Folding Unit; Condition as is; Working width 530mm; 4 fold pockets; Knife shaft. Folding machine MBO T530-2 secound unit; condition as is; working width 530mm; four pockets; knife roller.
Key data: 2000 mm, 6 mm
Köllschen AM 2000 × 6, built in 1970: Working width: 2,000 mm Max. sheet thickness: 6 mm Motor power: 12.5 kW
Folding machine MBO T530-1-53/4 F, 4 pockets, counter, compressor, 2nd folding unit 4 pockets, 1 bar, machine number X02/22, in good condition, immediately available WITHOUT DISPLAY If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
Pallet feeder PFH-82 4 buckles BCUH-78 2 knives Batch counter Anti-noise hood SBP-66-VE delivery (year 2010) 6 folding rollers changed in 2025.
Folding machine GUK FA 36/4 AS, machine number 49664, year of construction 2005, 4 pockets, speed controller, friction feeder, noise insulation cover, counter, delivery, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
Key data: 3240 mm, 5 mm
Max. bending length: 3240 mm Max. sheet thickness: 5 mm steel Upper beam stroke: 350 mm Program control via touchscreen (back gauge, bending angle adjustment, stroke of the upper beam, sheet thickness, number of pieces, etc.) Motorized height adjustment of the bending beam (adjustment of the sheet thickness) Manual and automatic mode possible Controlled backgauge with spring fingers Central lubrication Various additional bending and reinforcing rails Operating instructions 5700 kg
Folding machine 2009 1. Folding unit: 6 buckles MBO vario control incl. touchscreen Flat pile feeder Working width 53 cm Spiral folding rollers with parallel fold and standard ou roller cover Stainless steel slitter shafts 30 mm Motorized folding rollers + mw adjustment VACUSTAR cutting head feeder Extension to 100 cm (instead of 84 cm) 2.Folding Unit: vario Control working width 53 cm spiral folding rollers Motorized folding rollers + MW Control Sheet tracking with transfer table With MBO delivery A56 Available: immediately Location: Germany
Pallet feeder 4 buckles BCUH-78 2 knives Side buckle Batch counter Anti-noise hood SBP-66+MKE+VE delivery (year 2007) Belt delivery Folding rollers changed in 2021, belts in 2024.
WITH TRIMMER p/n: 2654000N SN: 060900759 Format: up to SRA
Intermittent folding box cartoner with automatic blister feeder. Mechanical output up to max. 100 cycles/min. The unit is fitted with: blister infeed, code reader LAETUS, leaflet folder GUK, coding device, reject station, vacuum pump. PLC: EBERLE.
Reference Num.: 4209 Brand: MBO Type: T 460 Available: directly Status: Not in production Location: Deutschland
Kircheis 2100 x 3 mm Max worklength: 2100 mm Max tickness: 3 mm Length: 3250 mm Depth: 800 mm Hight : 2000 mm Weight: 2,5 ton
Order No.: 82950936 Ser. No.: 951115980 Format max. (cm): 48x32
Size: 520 mm Equipments: 4 buckle plates 1 Knife Flat pile feeder
maximum number of results exceeded
please refine your search
