folding used for sale

Format range: 480 mm min. 56 mm Equipment: Longitudinal seam, folding floor, double edge, electronic gluing unit HHS, 4 channel with 2 application heads, pane under-gluing unit left, Bobst CUBE control, vibrator, primary crusher right and left, Kicker, counter, minimal folding device, pneumatic, clocked Pressing tape. Overhaul 2023: cleaned, tested, new investor and Transport belts.

Ser. No.: T102G05217 Counter: unknown, has no counter, very little used Speed: depends on the performance of the press Format: min. Width 206 mm / Length 275 mm // max. Width 320 mm / Length 457.2 mm Equipment / Additional information: Paper Weight: uncoated (Min) 64 gsm/16 lb Bond coated (Min) 105 gsm/28 lb Bond Paper Weight (Max) 300 gsm/110 lb Cover Set size (stapled folding) 2-35 Sheets PBM350 (80 gsm/20 lb Bond) Set size (non stapled folding) 1-2 sheets Off-line Use: Yes Power Source: 100-230V 50-60Hz Compatible with: Ricoh Series 7100, 7200, 8100, 9100, 9200, C9230 -Manual hand feeding possible Trimmer: Each sheet is trimmed manually (head, foot, front) during the processing flow.

Automatic machine Bag machine for the production of bags on roll. Capacity 50 bags / minute (depends on the size) Machine width 1200 mm Unwinder width = 1200 mm (tubular film) Core Magazine Folding unit for C folding Floor welding and perforating unit Automatic winder (turnstile) with automatic sleeve feed

Working width: 520 mm; Planing shaft: Tersa; Number of knives: 4; Dressing table length: 2300 mm; Hollow and pointed joint adjustment: no; Dressing stop angle adjustable: yes; folding up the dressing tables: pneumatic; maximum clearance thickness planer: 250 mm; Height adjustment thickness table: electric; Planer thickness display: digital; Feed speed: 5/8/12/18 m/min; Feed roller: steel; Pull-out roller: rubber; Pressure beams: articulated; Table rollers: no; Engine power: 7 kW; Engine braking: yes, automatic; Suction connection: 160mm; Machine length: 2300 mm; Machine width: 1100 mm; Weight: 980; Stable steel-gray cast iron construction Size, ribbed dressing tables made of gray cast iron Smooth running due to high dead weight Four feed speeds Motorized thickness table stroke with two speeds and digital display Articulated pressure beam in infeed 4 knife shaft, pre ...

Carriage length: 3200 mm; Cutting width at width stop: 1270 mm; Cutting width at cut-to-length fence: 3200 mm; Cutting depth: 136.5mm; Vorritzer: Yes; Saw blade swivel range: +45Â; Height adjustment of saw blade: electric; Swivel adjustment saw blade: electric; Adjustment of width stop: manual; Display saw blade angle: digital display; Display cutting height: -; Display Width Stop: Scala; Display Cut-to-length ruler: Scala; Scoring gear adjustment: manual; Saw blade diameter: 400mm; Speeds: 4000 rpm; Motor power: 7kW; Suction connection: 80 and 120mm; Machine length: 3500mm; Machine width: 2200mm; Weight: 715 kg; TECHNICAL DATA Dimensions and Weights Weight (net) approx. 715kg connection Suction Suction nozzle diameter120mm Extraction nozzle diameter saw blade protection80mm Installation information transport width990mm Machine body length1900mm machine body Width/ ...

Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 1 ja/Yes boring of olive 1=yes, 0=no: 1 ja/yes Corner bearing and olive drilling machine Götzinger OBM-PLUS Vertical drilling unit with quick-change device Pneumatic feed via foot valve 1 adjustable backstop 2 swiveling workpiece supports 1 machine stand complete with shelf Left and right roller conveyor each 1.5 m, 200 mm wide, 4 rollers each 220/380V, 50Hz, 1.1KW 1 drill head BKF 3, 21.5 mm pitch, quick-changeable Drill mount M 10, cyl. right/left complete with stop system 2200 mm long Total length with 12 folding stops adjusted to a constant grip dimension (olive drilling) Consisting of: 2 dowel drills d=10 mm 1 artificial drill d=25 mm 1 drill head BKF 2/3 quick-change drill 2/3 spindles for corner bearing on the loose frame part. Hardware Roto- alternative on request Complete with stop system with 2 foldi ...

sliding carriage length: 3200 mm; cutting width with rip fence: 1270 mm; Max. cross cut width left from saw blade: 3200 mm; Max. cutting height 90°: 140 mm; Max. cutting height 45°: 99 mm; scoring unit: yes; height adjustment: motorized; tilt adjustment: motorized; rip fence adjustment: motorized; display saw blade tilt: digital; display saw blade height: digital; display rip fence: digital; display crosscut: scala; saw blade diameter: 400 mm; saw blade speed: 3000 - 4000 - 5000 U/min; motor power: 7,0 kW; motor brake: yes / automatically; suction connection: 80 mm / 120 mm; machine length: 3600 mm; machine width: 1900 mm; weight: 1600 kg; With swiveling 400 mm saw blade and preheating device. M version with motorized height and angle adjustment of the saw blade. - Sturdy cast steel construction guarantees precision, smooth running and durability - Smooth-runn ...

AVAILABLE FROM THE END OF AUGUST 2023 3 MONTHS WARRANTY Offer consisting of: - Gathering tower VAC-100a - Gathering tower VAC-100m - Stacking lowering table ST-40 - Collection and folding unit ACF-30 - Saddle stitcher SPF-30 - Three-side cutter HTS-30 - long delivery LC-200 Horizon VAC-100a / Horizon VAC-100m / VAC-100m Suction air gathering machines - Technology: Touch & Work - Model: Suction and blowing air gathering tower - Number of stations: 6 - Error avoidance: error, double blade and jam control - Job memory: 9 memory locations for repeat jobs Programs: - Dual cycle (non-stop operation) - Zeroing (1x and 2x) - Brochure program - Block program - selective compilation - Format: max. 500x350mm; min. 148x120mm - Paper weight: 40-250g/sqm - Loading capacity: 55mm/ station - Speed: up to 9,500 sets/h - Electricity: 230V; 50/60Hz - 1,86kW - ...

Agitator 0.37 KW 910 rpm and 4-leaf folding stirrer 50 / 150 mm for drums With crossbeam made of aluminum profiles 45 45 800 mm. Electric motor, 3 x 230/400 volts, 0.37 kW, IP55, 6 poles 910 rpm, With motor protection plug and shielded supply cable. Placed at an angle on truss. Stainless steel shaft D20, length 800 mm, diameter 20 mm, material 1.4571. With rigid coupling, bare, material stainless steel 1.4571 Impeller: Four-bladed folding stirrer, diameter 150 mm unfolded, 50 mm folded, for drums, material stainless steel 1.4571

3 MONTHS WARRANTY Offer consisting of: - Gathering tower VAC-60a (YOC: 2010) - Gathering tower VAC-60m (YOC: 2010) - Gathering tower VAC-60m (YOC: 2010) - Stacking lowering table ST-40 - Collection and folding unit ACF-30 - Saddle stitcher SPF-30 - Three-side cutter HTS-30 - long delivery LC-200 Horizon VAC-60a / Horizon VAC-60m / VAC-60m Suction air gathering machines - Technology: Touch & Work - Model: Suction and blowing air gathering tower - Number of stations: 6 - Error avoidance: error, double blade and jam control - Job memory: 9 memory locations for repeat jobs Programs: - Dual cycle (non-stop operation) - Zeroing (1x and 2x) - Brochure program - Block program - selective compilation - Format: max. 500x350mm; min. 148x120mm - Paper weight: 40-250g/sqm - Loading capacity: 55mm/ station - Speed: up to 9,500 sets/h - Electricity: 230V; 50 ...

Format range: max. 1040 mm min. 50 mm Equipment: longitudinal seam, folding bottom, double edge, 4-point gluing, electronic finishing unit KAS TOP Guard, 8 channel with 3 application heads, Disc gluing unit on the left, feeder with vibrator, mini box device, Primary crusher right and left, kicker, counter, digital position indicators, motorized medium transport in folding, pneumatic, intermittent Press strip. Other: Machine can be inspected in production by arrangement. (very neat condition)

3 MONTHS WARRANTY Offer consists of: - Gathering tower VAC-100a - Gathering tower VAC-100m - Stitching and folding SPF-20A - Front cutter FC-20A Horizon VAC-100a / Horizon VAC-100m Suction air gathering machines - Technology: Touch & Work - Model: Suction and blowing air gathering tower - Number of stations: 10 per tower - Error avoidance: error, double blade and jam control - Job memory: 9 memory locations for repeat jobs - Expandability: up to 6 towers (60 stations) Programs: - Dual cycle (non-stop operation) - Zeroing (1x and 2x) - Brochure program - Block program - selective compilation - Format: max. 500x350mm; min. 148x120mm - Paper weight: 40-250g/sqm - Loading capacity: 55mm/ station - Output: up to 9,500 sets/h - Power: 230V/50Hz - 1,86kW - Dimensions: 842x652x1.961mm - Weight: 310kg Horizon SPF-20A Stitching and folding unit:  ...

Universal Folding Former, Folder FASTI Type 81501 Fabr. No. 928151 015 Year of construction 1992 Sheet thickness max. 1.5 mm Sheet thickness min. 0.5 mm Number of roller stadiums 7 pieces Profile height approx. 20 mm Centre distance of the rebate shafts 100 mm Working height 900 mm Working speed 7 and 14 m/min. Motor power 2.3 / 3 kW (pole switchable) Mains connection 400 volts, 50 Hz. - two speeds via pole-switchable drive motor - Standard roller set No. 5 for single and double standing seam- Roller set No. 11 for folding seam- Center rollers for S-fold - Pair of rollers for the production of locking cams in a standing seam - Instruction manual with electrical plan Space requirements L x W x H 1500 x 660 x 1100 mm Weight 450 kg very good condition; used

3 MONTHS WARRANTY Offer consists of: - Gathering tower VAC-100a - Gathering tower VAC-100c - Staple and folding SPF-20A - Front cutter FC-20A Horizon VAC-100a / Horizon VAC-100c Suction air gathering machines - Technology: Touch & Work - Model: Suction and blowing air collection tower - Number of stations: 10 per gathering tower - Error avoidance: error, double-blade and jam control - Job memory: 9 memory locations for repeat jobs - Expandability: up to 6 towers (60 stations) Programs: - Double cycle (non-stop operation) - Zeroing (1x and 2x) - Brochure program - Block program - Selective gathering - Format: max. 500x350mm; min. 148x120mm - Paper weight: 40-250g/sqm - Charging capacity: 55mm/station - Capacity: up to 9,500 sets/h - Electricity: 230V/50Hz - 1.86kW - Dimensions: 842x652x1.961mm - Weight: 310kg Horizon SPF-20A Staple and fo ...

Offer consists of: - Gathering tower MC-80a - Staple and folding SPF-11 - Front cutter FC-11 Horizon MC-80a Suction Air Gathering Machine - Model: Suction and blowing air collection tower - Number of stations: 8 per gathering tower - Error avoidance: error, double-blade and jam control - Expandable to 6 towers (48 stations) Programs: - Double cycle (non-stop operation) - Zeroing (1x and 2x) - Brochure program - Selective gathering -Format: max. 740x318mm; min. 160x110mm - Paper weight: 50-260g/sqm - Charging capacity: 50mm/ station - Capacity: up to 5,100 sets/h - Electricity: 400V; 50Hz - 1.86kW - Weight: 229kg - Dimensions: 660x810x1,660mm Horizon SPF-11 Staple and folding unit: - Format setting: manual - Staple heads: 2 Expandable to 4 stitching heads - Stitching options: backstitch, block stitching, corner stitching - Eyelet stitchin ...

DIRECTLY FROM THE PRINT SHOP We sell this machine on behalf of our customer and try to realize his asking price. However, we are open to offers from you. Offer consisting of: Fastbind Casematic H32 PRO Covermaker / Casemaker incl. accessories (laminator, block press) The FASTBIND Casmatic H32Pro is a professional covermaker / casemaker with folding unit for the on-demand production of individual book covers for hardcover bindings and photo books up to 330 x 330 mm. • For the production of custom printed hardcover book covers. • All you have to do is print the desired motif on self-adhesive material or self-adhesive material on the back. • Of course, all known book cover materials can also be used if they are self-adhesive or self-adhesive or glued • With the help of the Hardcover Maker, the grey boards are inserted and covered with a precise fit. • T ...

• For applying security labels to both side flaps of a folding bo. • Output max. 100 cartons/min • Max. Folding box width in infeed direction crossways 180 mm, max. height 92 mm • Side conveyor belts • Upper retaining conveyor • 2 Label dispensers PAGOmat 6/2 A-100 with operating units • Label dispenser Height and crosswise adjustable • Label reels core diam. 76 mm, outer diam. max. 280 mm • Various controls via light barriers • Blow-out station for bad cartons with ejection countercheck • HMI Siemens Simatic Panel Touch, • PLC Siemens S7-300 CPU 314C-2DP • Mobile • Drive 400V/50Hz

• Equipped for toploader boxes • Output max. 20 cartons/min • Blank magazine • Blank transport • Gluing station with 2 glue nozzles for side flaps with Robatec Concept 4 hotmelt gluer • Folding station with folding stamp • Carton discharge with outfeed conveyor • Vacuum generation with Venturi nozzles • Touch screen Siemens Pro-Face • Elau Pac-Drive control with 1x Max-4 and 4x MC-4 • 4 formats for toploader cartons: • Blanks: 225x204, 284x263, 284x348, 397x458 mm • Ready glued WxDxH in throughfeed direction: 70x95x35, 70x95x65 mm and 70x182x65mm, 70x182x120 mm, other formats possible • Drive 24/400V/50Hz • Qualification documentation (IQ/OQ)

Bundle packer • Packing sizes in feeding direction max. width 400, depth 450, height 300 m • Foil width max. 530 mm • Output max. 25 packs/min • 2 infeed conveyor • 1x for folding boxes, product width max. 220 mm • 1x for bottles/cans, product width max. 80 mm • Stacking device for folding boxes • PLC Siemens S7-300 • Simatic touch panel • Connection 400V/50Hz/2kW Shrinking tunnel • Tunnel width 450 mm • Tunnel height ca. 260 mm • Tunnel length 800 mm • Max. heating temperature 300 °C • Grid band (speed adjustable) • Digital temperature monitoring • Cooling fan • PLC Siemens S7-300 • Connection 400V/50Hz

Kopp B100 FF Folding Wrapping Machine Folding wrapping machine, also known as cellophanier, for all heat-sealable films, including recyclable or compostable films Fully automatic packaging machine for the medium output range. The longitudinal sealing seam is attached to the bottom of the product. The sides of the box are closed over the entire surface. Easy and extremely fast format changeovers thanks to quick-change format sets Clear control panel for setting all important machine functions Applications In all areas where cuboid products are used, the cellophane maker can be used BX100FF, including as a banding machine. For packaging tablet boxes in the pharmaceutical industry, in the tobacco industry as a case packer for the production of cigarette containers, as protective packaging in the food industry for coffee, tea, chocolates and confectionery or in the toy indu ...

Format Range: max. 2250 mm min. 340 mm Features: longitudinal seam, folding bottom, double edge, 4-point gluing, electronic gluing unit HHS XP-E08 with 6 application heads, Primary crusher left, counter, motorized format setting, Friction feeder with vacuum and cycle control, digital position indicators, motorized transfer station, Folding middle station, UV marker, 3 x cutting alignment on the press belt, extended press belt. Overhaul 2023: cleaned, tested, painted and with new conveyor belts, as well as equipped with new transport baths. Miscellaneous: The machine can be viewed while it is running by arrangement.

Press brake, bench brake, folding machine, swivel bending machine, die bending machine -Manufacturer: zts, folding machine type XONM.2000/2A-4 -Drive: hydraulic -Max. Working width: 2000 mm -Max. Sheet thickness: 2 mm - Connected load: 2.2 kW -Dimensions: bench 2850/1100/H1400 mm / aggregate 720/540/H760 mm -Total weight: 2160 kg

Pad for folding tool, bending tool, die, lower blade, lower tool, prism tool, turning prism, 1-piece die block for press brake, die tool, folding tool -Pad for press brake tool: from press brake Promecam STPC 250 40 121 -Length: 4200mm -Dimensions: see the drawing in the photos -Dimensions: 4200/106/H106 mm -Weight: 212 Kg

Hydraulic pump, oil pump, gear pump, press brake, folding bench, folding machine, hydraulic punch, hydraulic punch -Spare part: Hydraulic pump from Atlantic press brake type: HPT 13536 -Manufacturer: Eckerle -Pump type: 1PF2GH3-12/013RE07MU2 -Drive: Loher type 132M-4 -Power: 7.5 kW 1440 rpm -Dimensions: 800/370/H300 mm -Weight 98 kg

3 MONTHS WARRANTY Offer consisting of: - Gathering tower VAC-60a - Gathering tower VAC-60c - Stack lowering table ST-40 Saddle stitcher Stitchliner 5500: - Collection and folding unit ACF-30 - Saddle stitcher SPF-30 - Three-sided cutters HTS-30 VAC-60a, VAC-60c Suction Air Gathering Machine - Technology: Touch & Work - Model: Suction and blowing air collection tower - Number of stations: 6 - Error avoidance: error, double-blade and jam control - Job memory: 9 memory locations for repeat jobs - Expandability: up to 6 towers (36 stations) Programs: - Double cycle (non-stop operation) - Zeroing (1x and 2x) - Brochure program - Block program - Selective gathering - Format: max. 500x350mm; min. 148x120mm - Paper weight: 40-350g/sqm - Loading capacity: 130mm/ station - Speed: up to 9,500 sets/h - Electricity: 230V; 50/60Hz - 1.86kW - Dimensions:  ...

Amada schiavi hfb 80-25 folder -model hfb 80-25 -folding length: 2.5 m -folding force: 80 tn -cnc 2k -axles: 8 axles -year 2002 -weight: 6000 kg -There is currently a fault in one of the proportional valves of one of the pistons of the y1,y2 axes. The approximate cost of the piece is €3,300 The price includes loading the machine on a truck. Transportation, unloading and start-up of the machine is not included in the price and will be the responsibility of the buyer.

Extrusion line for blowing polymer films of type ABA, MODEL 2L800 Manufacturer RUIAN AOXIANG PACKAGING MACHINERY CO., LTD 2017 onwards Specifications 1. Film thickness: 0.01 - 0.1 mm; (Thickness: 8%) 2. Maximum film width: 800 mm 3. Recyclable materials: LDPE + CaCO3, PND + CaCO3, linear LDPE; CaCO3 content - maximum 40% 4. Maximum performance: 100 kg / h; 5. Dimensions (L x B x H): 6000 x 3700 x 6500 mm; 6. Weight: 4.5 t; 7. Main power: 70 kW; 8. Certification: CE European Compliance Certificate, SGS Independent Examination Certificate, National Compliance Certificate of China GB4455 Data sheet 1. Extruder (2 sets) 1.1 auger diameter: 55 mm 1.2 Ratio of length to diameter: 30: 1 1.3 Maximum screw rotation speed: 100 rpm. 1.4 Type of screw: mixed type, with a barrier 1.5 The material of the auger of the cylinder: 38CrMo (American certificate of protection of inventions  ...

• For turning and grouping folding boxes with 5th flap (suspension or display flap) and transfer to downstream machine, e.g. Pester PEWO-fold stretch-banding machine. • Infeed with 5th flap at the bottom in advance • Max. grouping of 6 products, each 3 products rotated by 180° • Infeed capacity max. 140 cartons/min. • Folding box dimensions min./max. (a x w x h) 30-64 x 20-39 x 82-156 mm, other dimensions after testing • Servo controller Elau PacDrive C200 with 1x PacDrive MC-4 • Operator terminal Pester Micro-Panel 10,4 • Programmable control system • Bypass function • 2.586 operating hours • Drive 400V/50Hz

Key data: 500 mm, 850 mm, 1100 mm

Gebr. Tool trolley for ISO 50 / SK 50 fixtures of chalice CNC trolley - with folding table - Tool inserts 32 pieces Dimensions (LxWxH) 500 x 850 x 1100 mm with folding table 430 x 430 mm

pressure: 150 t chamfer lenght: 3100 mm distance between columns: 2550 mm column arm: 405 mm table width: 150 mm ajustment speed: 200 mm/sec working feed: 10.0 mm/sec return speed: 120 mm/sec stroke: 215 mm dayligth: 465 mm table height: 960 mm operating pressure: 320 bar oil volume: 200 l voltage: 3x 400 V total power requirement: 15.0 KW weight of the machine ca.: 9500 kg range L-W-H: 3958 x 2350 x 2750 mm maintained condition () Furnishing: - BEYELER electro-hydraulic CNC press brake - CNC control CYBELEC model DNC 800 HP numerical CNC control unit 2D graphical programming & product display Color screen Tool & program library clear and logically structured screen pages Collision display Swivel operation, front right - CNC controlled axes (Y1+Y2-X-R-Z1+Z2) - CNC-controlled back gauge adjustment (X-axis) - CNC-controlled vertical adjustment of the stop beam (R-axis) - CNC-contro ...

Lemo Intermat V. 600 ST-N-400 , Year 1999 Machine for the production of wicketer bags HD-PE, LD-PE, LLD-PE, PP Capacity max. 210 bags/minute. Unwinder Max. width = 1350 mm (with brake and side edge control) Max. diameter = 1200mm, Sleeve = 6" Longitudinal separating unit (can also be used for perforation) Folding triangle to form a half tube. Folding unit for bottom gusset 2 punching units bridge with tools 1 punching unit for valves 1 separating seam welding device Pen stacker Data: Bag length 155 -520 mm incl. flap flap = 40 -60 mm, Bottom gusset =27-60 mm Bag width = 70 to 400 mm Test run is possible. The machine is well maintained.

CAM RV-P Heavy Duty Wrapping Machine for Folding Cartons, etc. with Heat Sealable Film (PP, PVC, polyethylene, laminated papers, wax papers, etc.), folding carton format range min. 40 x 15 x 60 mm (AxWxC), max. 110 x 50 x 220 mm (AxWxC), film width from 90 to 335 mm, performance up to 150 cycles per minute, machine footprint approx. 3505 x 2085 mm (LxW), machine height approx. 1670 mm, machine net weight approx. 1750 kg

Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm Weinig Unicontrol 6 with NC spindles ----------------------------------- Technical data summary (please inquire about any additional accessories included) ... Generally ----------------------------------- > Loading dimensions: 7000 x 2400 x 2400 mm > Machine weight, approx.: 3700 kg crosscut saw ----------------------------------- > Electronic crosscut saw, horizontally infinitely adjustable > Number of tools: 1 piece. > Spindle speed: 2800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3 kW > Laser directional light to detect the saw section Electronically safe length stop ----------------------------------- > Length 3600 mm 1. Tap and slot spindle ---------------------------------- > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Spindle stroke vertical adjustme ...

- Folding and gluing machine - Supply voltage(V): 400 - Auxiliary voltage (Vdc): 24 - Frequency (Hz): 50 - Power (kW): 3 - Power of gluing system (kW): 5,8 - Machine length (mm): 6175 - Machine width (mm): 1576 - Machine height (mm): 1580 - Minimum die cut format (mm): 120x120 - Maximum die cut format (mm): 720x1020 - Full automatic continuous feeder - Folder flap group with hot melt gluing system - Folding tools with automatic transport devices - Paper transport system with adjustable pressure - Automatic delivery table - 1 double-sided tape applicator – minimum interval between two tapes is 35 mm - Material: paperboard 200-600 g/m2, corrugated cardboard up to 4 mm thickness - Minimum paper weight: 150 g/m2 - Maximum paper weight: 350 g/m2 - Speed of glue application: 100 m/min Designed for production: - Straight-line boxes - Crash-lock bottom boxes - Fol ...

Fixed format lateral drag sealers with device for automatic folding of the upper flaps. MOTORIZED BELT SIDE CONVEYORS The side conveyors of motorized gripping belts ensure continuous take-up of the product. TAPPING HEADS Two types of sealing heads are available for 50 mm or 75 mm wide adhesive tape. MANUAL REGULATION OF DIMENSIONS It is possible to adjust the height and width of the conveyors manually. AUTOMATIC FLAP FOLDER Device for automatic folding of the upper flaps.

Tenoning spindle: 2 St. Number of milling agregates: 7 St. Spindle diameter: 50 mm Control: CNC, Weinig PC-Nexus Weinig Uncontrol 12 with radial and axial CNC spindles and VARIO table .. The machine has already been professionally dismantled and stored in 73447 Oberkochen Specifications summary (please inquire about any additional accessories included) .. crosscut saw .. > Crosscut saw electronically, horizontally infinitely adjustable > Number of tools: 1 pc. > Spindle speed: 3000-6000 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3.7 kW > Laser guide light for detecting the sawing section > Axial adjustment path 150 mm NC axis, electronically stepless > Adjustment path, radial, pneumatic, 8 positions, e.g. for edge rounding from above rounding aggregate .. > Position: horizontally below > Axial adjustment path together with the crosscut saw. electronic len ...

Number of boring motors: 1 St. boring of corner bearing 1=yes, 0=no: 1 0 boring of olive 1=yes, 0=no: 1 0 Dimensions (L/W/H): 3600x800x1900 mm weight: ca. 120 kg Olive drilling machine type: OBM-Plus Special version (corner and scissor bearing + handle olive drilling) --------------------------------- Vertical drilling unit with quick-change device Pneumatic feed via foot valve 1 adjustable back stop 2 swiveling workpiece supports 1 machine stand complete with shelf 220/380V, 50Hz, 1.1KW Machine complete, but without drilling tools Drill head BKF 3, 21.5mm pitch, quick-changeable Drill holder M 10, cyl. right/left complete with stop system 2200 mm long Total length with 10 folding stops set to a constant grip size (for handle olives) Drill head BKF 2 can be changed quickly 2 spindles for corner bearings drill on the loose frame part complete with stop system with 2 folding stops Drill co ...

Tenoning spindle: 1 0 Number of milling agregates: 5 St. Spindle diameter: 50 mm control: Weinig, PC-Nexus # 2732 Weinig Unicontrol 6 with NC spindles ------------------------------------------------ Machine is in checking process at the moment! Technical data summary (please inquire about any additional accessories included) Pos. 1: Crosscut saw ------------------------------------------------ > Number of tools: 1 piece. > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Tool diameter max.: 400 mm > Motor power: 3 kW > Adjustment path radially pneumatically controlled to 8 positions, e.g. for edge rounding from above > Laser directional light to detect the saw section Pos. 2: Rounding unit horizontally at the bottom ------------------------------------------------ > Position: horizontally below > Motor power: 1.5 kW > Spindle diameter: 20 mm > Clamping length 25 mm > Spindle spee ...

Faltschachtelklebemaschine / Folder Gluer Lamina 1800GL WS Year 2016 - 1037516 Manual fed in-line folding, gluing and taping machine Format min. 70mm - max. 1800mm Nordson hotmelt Gluing Unit - 2 gluing hedas Speed 0-40 m/min PLC control with touch screen The Lamina Gluer is a manual fed in-line folding, gluing and taping machine. By the genius construction it is able to handle various sizes of different materials. The tool free set-up allows a quick change over even for short runs. Options for the machine include cold glue, back support unit, tape applicator etc. Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nuernberg - Can be test

Description: Step ladder, manufacturer Würth, 2 x 4 steps, dimensions 84 - 92 cm  , Folding ladder, 2 x 6 steps Folding ladder, 3 steps Approx. Onsite Dimension. (l x w x h): 800 x 500 x 1,300 mm, weight approx.: 60 kg

Tenoning spindle: 1 St. Number of milling agregates: 4 St. Spindle diameter: 50 mm control: Südtron BT 20 Weinig Unicontrol 6 --------------------------------- General data --------------------------------- Loading dimensions approx. 5000x2400x2400 Machine weight approx. 3000 kg crosscut saw --------------------------------- > Pneumatic crosscut saw, against 8-fold turret stop > Spindle speed: 2800 > Spindle diameter: 40 mm > Tool diameter max.: 350 mm > Motor power: 3 kW > Laser directional light to detect the saw section Length stop - clocked --------------------------------- > Length stop 2700 mm 1. Tap and slot spindle --------------------------------- > Number of tools: 3/4 pieces. > Tool clamping length: 320 mm > Vertical pneumatic spindle stroke: 240 mm for wood thicknesses IV 68-92 > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Tool diameter max.: 320 mm > Motor power: 11 ...

Fully reconditioned foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. This machine is general overhauled and in a as good as new condition with new controls with frequency converter (renewed in 2023). The format on the machine is 500 gram, 125 x 75 x ±56 mm, bottom folding. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. If there is no foil in the cell, the machine will stop. The speed can be adjusted by a frequency converter between 40 - 70 packages per minute (depending on filling weight, product, product viscosity and quality packaging). Outfeed conveyor. On request we can do a dry test (without product) with your own foil o ...

Description: Serial Number: 39000135 Working length: 2540mm Double motor drive for folding botom : 2 x 2,2kw Stroke of upper opening: 350 mm , Sheet thickness: 4 mm Stroke of clamping beam 350mm Folding botom adjustment: 80 mm Geometry of clamping beam: 48 ,º Blade of the lower beam, approx. 700 N/mm²'. Manual clamping system on the clamping beam (WZS020) Rated power: 6.5kva CE-registration weight approx.: 4,500 kg, Approx. Onsite Dimension. (l x w x h): 4,314 x 1,694 x 1,510 mm

Fully reconditioned foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. This machine is general overhauled and in a as good as new condition with new controls with frequency converter (renewed in 2022). The format on the machine is 250 gram, 100 x 75 x 35 mm, bottom folding. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. If there is no foil in the cell, the machine will stop. The speed can be adjusted by a frequency converter between 40 - 90 packages per minute (depending on filling weight, product, product viscosity and quality packaging). Outfeed conveyor. On request we can do a dry test (without product) with your own foil on  ...

Fully reconditioned Benhil 8304 foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil. This machine is general overhauled and in a as good as new condition with new controls with frequency converter (renewed in 2023). The format on the machine is 10 - 25 gram, 40 x 30 x ± 10 - 25 mm, bottom folding principle. Packaging material: aluminium foil with photocell mark. Widht of the foil: 85 mm. The photocell line distance is 80 mm. The butter is feed with a hopper with agitator screw inside, mechanically drive from out of the main machine (tooth wheels and axles). The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil (correct by brake system). If there is no foil in the 1st cell, after cutting the foil in length, the machine will stop. The speed can be ad ...

Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. This machine is in a reasonable mechanical and electrical condition (renewed by Schuy, auftr. nr: 13632-01). The format on the machine is German Standard size: 250 gram, 100 x 75 x 35 mm, bottom folding. Capacity: up to 50 portions per minute. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a later build on photocell on the paper infeed, to control the exact position of the print on the foil. Outfeed conveyor., Additional features:, Excluding:, - Datecoder., Type of Machine: Butter Packaging Machine, Capacity: ± 750 Kg/h, Capacity (Units): up to 50 packages per minute, Packaging Weight: 250 gram, Packaging Size: 100 x 75 x 35 mm (German standard), Packaging type: Bo ...

Fully reconditioned foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. This machine is general overhauled and in a as good as new condition with new controls with frequency converter (renewed in 2023). The format on the machine is 250 gram, 100 x 75 x ±35 mm, bottom folding. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. If there is no foil in the cell, the machine will stop. The speed can be adjusted by a frequency converter between 40 - 90 packages per minute (depending on filling weight, product, product viscosity and quality packaging). Outfeed conveyor. On request we can do a dry test (without product) with your own foil o ...

System includes (1) Jet High-Performance Platesetter Krause, year of manufacture: 2007 (2) Polymer Printing Plate Processor Krause 650 Bluefin, year of construction: 2006 (3) Polymer Printing Plate Processor Krause Bluefin XS 650, year of construction: 2012 (4) Platesetter Krause LS-PERFOMANCE CTP, year of construction: 2006 (5) Register Punching and Folding System NELA VPC 463, year of construction: 2002 (6) Register Punching and Folding System NELA VCPeco, year of construction: 2016.

R26097/16 EDELMANN Continuous Printing Machine Model: COLOR PRINT V72 SL Built: 2008 Paper web width: max. 720 mm Printing width: max. 710 mm Availability: approx. 12/2011 Servo drive Microprocessor control R/R, R/B Flattening: roll diameter max. 127 cm BST web edge and center control Track length control 2 offset printing towers Automatic inking unit washing Railway turning device Hole punching unit Cross cutters UV dryer Plough folding system Available: by arrangement

Preliminary operating machine for year QIV/2013, 100 operating hours Basic 1530 Basic Waterjet Processing Centre 1530 Working area: X-axis 3050 mm Y-axis 1550 mm Z-axis 150 mm The abrasive water jet cutting requires the addition of a supplied abrasive cutting head. This reduces the distance between cutting head and factory tool. drives: drive side, reverse play-free linear drives in X and Y are used with stoeration-free CAN-BUS communication as well as guide well-known manufacturer. This This means maintenance and wear-free operation of the system and the long -term Drive unit X-axis is mounted on granite. Individual linear units are protected by folding beam and covers in addition to the ingress of dust and water. Accuracy: 0.05 mm / Working area Max.Speed: 15,000 mm/min Z axis German-speaking operator software for machine control Abrassiv de-sludge plant ...