We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
122,025 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
MBO T 8001. R Round Pile Feeder VIVAS Vacubelt and Vacutable 6 Folded Pockets 1st Movement 4 Folded Pockets 2nd Movement 2 Folded Pockets 3rd Movement All reels are in very good condition Navigator SBAP - 46 ME Delivery - Press Station more info on request
used
Heidelberg Stahlfolder Ti 52-4/4/1 year 2006 feeder FI-52 1st unit 4 cassettes Ti-52 2nd unit 4 cassettes 2.Ti-52 1 knife KB.1-52 Gluing device delivery SAK-56 good condition
used
Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 12 pieces -Tool angle: 28° -Dimensions: see the drawing in the photos -Dimension: 23 x 245mm -Length: 4386 mm / each 1 x 748/730/715/700/400/198/180/150/100/65 mm, 2x 200 mm -Weight: 175 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 5 pieces -Tool angle: 28° -Dimensions: see the drawing in the photos -Dimension: 24 x 239 mm -Length: 2010 mm / each 1 x 1030/495/95 mm, 2x 195 mm -Weight: 80 kg
used
Bending tool, die, bottom knife, bottom tool, prism tool -Tool: for press brake, 5 pieces -Dimensions: see the drawing in the photos -Length: 1745 mm / each 1 x 615/570/335/120/105 mm -Width/Height: 80mm -Weight: 65.7 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 3 parts -Tool angle: 90° -Dimension: 39 x 250mm -Dimensions: see the drawing in the photos -Length: 1265 mm / each 1 x 500/400/365 mm -Weight: 65 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 8 pieces -Tool angle: 90° -Dimensions: see the drawing in the photos -Dimension: 39 x 254 mm -Length: 2085 mm / each 1 x 680/445/350/200/180/105/70/55 mm -Weight: 112 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Tool: split, for press brake -Tool angle: 90° -Dimensions: see the drawing in the photos -Dimension: 38 x 256 mm -Length: 148 mm / each 1 x 78/70 mm -Weight: 8 kg
used
Bending tool, die, upper knife, upper tool -Tool: for press brake, 4 pieces -Tool: 90° -Dimensions: 98 x 27 mm -Dimensions: see the drawing in the photos -Total length: 1977mm -Lengths: 2x 1015/ 1x 545 / 1x 417 mm -Transport dimension: 1015/200/H55 mm -Weight: 42.6 kg
used
Bending tool, die, upper knife, upper tool -Tool: for press brake, 11 pieces -Tool: 60° -Dimensions: 95 x 36 mm -Dimensions: see the drawing in the photos -Total length: 7780mm -Lengths: 8x 835 / 2x 600 / 1x 500 mm -Transport dimension: 835/400/324 mm -Weight: 182 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Manufacturer: UKB, 35° punch/upper tool UKB system Amada type 11.104 3-piece -Radius: R 1.5mm -Height: 86mm -Load capacity: 700 kN/m max. -Dimensions: see the drawing in the photos -Total length: 2505 mm / (3 x 835 mm) -Weight: 34kg
used
Bending tool, die, upper knife, upper tool -Tool: for press brake, 9 pieces -Dimensions: 95 x 31 mm -Total length: 5005mm -Dimensions: see the drawing in the photos -Lengths: 5 x 835 mm / 1 x 300/260/170/100 mm each -Transport dimension: 835/210/100 mm -Weight: 86 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 2 parts -Upper tool: dimensions 835 x 60 x 130 mm each -Dimensions: see the drawing in the photos -Total weight: 47.5 kg
used
Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: from press brake EHT type EHP 11-40 -Measures: see drawing in the photos -Dimension: 4050/45 / H130 mm -Weight: 147 kg
used
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -hydraulic cylinder for: Harbs K2V recirculating machine -Piston diameter: approx. 40 mm -Piston rod: Ø 16 mm -Stroke: 132 mm -Recording piston rod: M12 x 1.5 mm -Dimensions: 80/80/H380 mm -Weight: 6.5 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool for: wire mesh, mesh wire -Wire division: 50 mm -Thickness: 25 mm -Drawing with the pictures -Total length: 550 mm -Total height: 194 mm -Weight: 20 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool for: closing folds -Thickness: 25/18 mm -Total length: 138 mm -Total height: 70 mm -Weight: 4 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool for: closing folds -Thickness: 25 mm -Total length: 470 mm -Total height: 195 mm -Weight: 18 kg
used
large working width: 2520 mm for sheets up to: 1.5 mm Upper beam opening width: 180 mm Adjustability bending beam: 40 mm Bending angle adjustment: 135° Weight: 1970 kg Dimensions: 1970 x 750 x 1250 mm
used
MBO K76/4 S-KTL - 32 pages year 93 Round Pile Feeder cassettes knives good condition
used
MBO T72/4/4/4 – 32 pages year 97 Round Pile Feeder cassettes good condition in production
used
Inv. Num. : 7070 Type: 6000/2 Producer: ZAKO Created: 2007 Parameters: Maximum bending length: 6000 mm Maximum sheet thickness when cutting: 2 mm Max. depth: 1000 mm Equipment: CNC control including touch panel Automatic Stops
used
buckles: 4 knives: 0 max. paper size: 49 x 66 cm serial no.: 25941/84 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
buckles: 4 automatic pcs knives: 0 pcs max. paper size: 38 x 65 cm format min.: 7 x 12 mm fold depth max. 46,5 cm paper grammage 40-250 g/m² full size 10 x 12 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
buckles: 4 pcs knives: 0 pcs max. paper size: 52 x 85 cm serial no.: 98979071 speed: 200 m/min voltage: 3 x 400 V frequency: 50 Hz dimensions: 3 x 1m + 1,80 x 1 m fold depth max. 46,5 cm paper grammage 40-250 g/m² full size 10 x 12 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
buckles: 6 0 number of blades: 1 max. paper size: 53,0 x 84,0 cm format min.: 10,5 x 10,5 mm incl. MBO stream delivery A 56 DC incl. double gate fold The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
new
DOUBLE LANES CARTON ERECTING MACHINE Can mount the same box on two strips at the same time German servo motor system German Siemens and Schneider electrical system PLC touch screen Glueing system with motor control Capability to work in different ways with plate Gathering system at delivery unit can be adjusted and connected according to job Voltage: 380V/50Hz Covering area: 4.0 1.4M The total power: 8Kw Maximum production speed: 400pcs/min Air pressure: 0.6Mpa (Dry and clean compressed air) Materials: Paper board 200-600gsm; corrugated board paper with thickness not exceed 1.5mm Blank length(L): 100mm – 450mm Blank length(B): 100mm – 450mm Height of side flaps(H): 15mm – 260mm Height of side flaps+lid(HI): 50mm – 260mm Conicity: 5°-40°
used
Year of production 1993. Bought in 2007 as efficient and operational, it was never launched in Poland. Stored in a dry room and secured with a tavern. Salvagnini S4 + P4 cutting and bending center P4_0387 model 2220 with configuration: TC24155F.CT.CRPD + DU2515.SF + S4.25.DF.H2.SSA.CC.P2R36.BU31.BU32.BU33.BU34.BU35.EI05.EI09.EI13.UL1 + SC115C + IMS2715.RIU + TC27155D + ASPA2420.SFE + P4-2220.RC.GPS.SFE.LSA.LIA.PB.T.DL.CLA.U29 + SPR24.POS + AIP24 + HISRS + PSMVMS + H and S4_0385 about configuration: TC24155F.CT.CRPD + DU2515.SF + S4.25.DF.H2.SSA.CC.P2R36.BU31.BU32.BU33.BU34.BU35.EI05.EI09.EI13.UL1 + SC115C + IMS2715.RIU + TC27155D + ASPA2420.SFE + P4-2220.RC.GPS.SFE.LSA.LIA.PB.T.DL.CLA.U29 + SPR24.POS + AIP24 + HISRS + PSMVMS + H P4: 2200 mm bending length, bending depth 200 mm, bending angle 125 degrees. Bending thickness 1.5 mm.
used
2015 6 Buckles 2 Knives Palamides Alpha 700, 2015 In production Available: 02/2024 Located: Germany
used
Reference Num.: 3684 Brand: MB B?uerle Type: Multimaster CAS 52/4 Construction year: 1996 Available: directly Status: In production Location: Deutschland Equipment: - 4 Falztaschen - Papierformat max. 52 x 72 cm
used
Size: 530 mm Equipments: 4 buckle plates sheet counter delivery
used
Size: Sheet size max: 960 x 1450 mm Equipments: Pockets: 4x second unit Control unit: MBO Navigator-Control Feeder Mode: Flat pile feeder Sheet size min: 170 x 200 mm Noise Protection Hood Pockets: 4x in first unit without delivery Sheet size max: 960 x 1450 mm Max. mechanical speed: 200 we sell the machine as a spare part donation
used
Size: 960 x 1450 mm Equipments: Max. mechanical speed: 230 Noise Protection Hood Control unit: MBO Navigator-Control the machine has water damage possible inspection Sheet size min: 170 x 200 mm without delivery The machine has water damage as it is possible to inspect we sell the machine as a spare part donation Pockets: 4x Feeder Mode: Pallets pile feeder Sheet size max: 960 x 1450 mm
used
Size: 72 x 104 mm Equipments: vertical pile feeder Compressor smallest fold length 45 mm 4 buckle plates Noise Protection Hood continuous/streem delivery sheet size min. /max. 42 x 64 mm / 72 x 104 mm
used
Flat Pile Feeder, 1st Plant 4 Bags, 2nd Unit CAS 38/2# 96952157 (2 Bags), Shed Delivery, Compressor
used
Size: 520 mm Equipments: Sheet size min: 160 x 40 mm Sheet size max: 520 x 420 mm Working width max: 520 mm Cross fold unit with 1x knife 4 bags in the first station Max. mechanical speed: 200 Feeder Mode: Round pile feeder Roller condition: ok Serial number: FH.FAPF.01957 Roller diameter: 40 mm
used
Working lenght 2040 mm Max material thickness 5 mm
used
Swivel bending machine RAS 67.30 HR Steel Plant Construction Location of the machine: 76661 Philippsburg The machine can be viewed on site. It works perfectly. You can arrange a viewing appointment at any time. We'd love to hear from you.
used
- Pallet feeder FP110 - MBO Navigator Control - 1. Station 4 buckles - 2. Station 960/6 buckles - 3. Station (Herzog Heymann) 52/4 buckles - Mobil Cross Fold Z2 - Mobile delivery S BAP 82 ME - Mobile delivery ASP 66-2ME
used
MKW Gathering Machine Rapid UT B3, with SFT 350, 8 stations, with circulating conveyor belt, with booklet/fold and front trimming
used
-Year 2000 -Max paper size 66x106 cms. -Anti noise hoods -Six electronic motorized buckles + 2 electronic knives -High pile feeder, Vaculift, Vacubelt, DV Pump -MBO MPC Control , Panel with all remote controls of the sizes and knives -Z 6 MBO mobile knife -HHS C 1100 glue system with 12 sections to connect -One spray glue gun, perforators and tools -Petratto DP 46 press station and stacker -All rollers in perfect conditions -Lot of parts and accessories
used
Max. bending length: 2,500 mm Max. sheet thickness: 1.5 mm steel Bending angle adjustable via potentiometer Stopover of the upper shore Segmented upper beam splint Manual backgauge up to 750 mm Operating instructions Approx. 1,600 kg
used
Pallet feeder PFH-66 4 Combi Fold Pockets BUH-66 High Performance Cross Fold CUH-66 Window pocket Gluing device Compressor stream delivery with press
used
6-buckles cross folder + 1 knife + 2 buckles, roller adjustment: fully automatic, full automatic knife, max.paper size: 55x85 cm, min. paper size: 12,8x14,8 cm, weight 1.450kg
used
Maximum sheet size 660 x 1280 mm, Pallet feeder, 4 buckles first unit, First cross knife (8 pages) Second cross knife ( 16 pages) parallel buckle to the first cross knife. SB-46/MP.D Press delivery. Noise hoods, Pump, Technical documentation, Standard tools. Intergrated counter.
used
mobile 2nd folder with 4 pockets, TD-66/4-T Motorized adjustable pockets Soundproofing hood
used
Key data: 1020 mm, 1 mm
Machine Type: Swivel Bending Machine Manufacturer: RAS Model: 61.1 Year of construction: 1965 Condition: good Offer Type: Used Machine Specifications: Capacity: 1020 x 1.5 mm Drive type: manual Remark: Material support at the back Weight: 220 kg The machine is in good condition and ready for immediate use and can be viewed and demonstrated by us. We would be pleased if you are interested in our offer. Errors, modifications and prior sale excepted.
used
Key data: 2040 mm, 2 mm
Max. bending length: 2040 mm Max. sheet thickness: 2 mm steel Upper beam adjustment motorized via foot switch Honeysuckle Notes Weight: approx. 1500 kg
used
Key data: 1020 mm, 2 mm
Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Upper beam can be swung out Bending rail ground Weight: approx. 500 kg
used
buckles: 2 knives: 0 max. paper size: 33 x 43 cm serial no.: 997 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.