folding machine used for sale

CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets with ...

CNC - Sheet Metal Parts - Roll Straightening Machine for plane straightening and relaxing of thermally cut sheet metal parts, for stamped parts, for sheet metal parts that have been cut to size with the sheet shear. Our roller straightening machine is a purely electric machine, not hydraulics, the electronically controlled servo motors enable automatic CNC – controlled face straightening in the continuous process. CNC – controlled precision sheet metal parts roll straightening machine for sheets from 0.7 mm to a maximum of 14 mm sheet thickness at 500 mm sheet width Largest sheet width 1,500 mm Guideline power over the full width - - Steel sheet quality SR235 from 0.7 mm to 10 mm - Stainless steel sheet from 1 mm to 6 mm Planning by - 19 piece straightening rollers with Ø 50 mm 21 pieces of intermediate rollers with Ø 30 mm 13 pieces of support roller sets with ...

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydraul ...

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydraul ...

Very high-quality CNC – controlled precision sheet metal bending machine with automatic bending sequence calculation – automatic, CNC – controlled double-sided pre-bending – conical bending device Roll diameter 350 mm Smallest weft diameter 1.1 x the roll diameter = 385 mm Maximum bending length 3,000 mm Nominal pre-bending performance over the entire bending length at 5 x D = 18 mm for sheet steel/ST40 Nominal bending performance over the entire bending length at 5 x D = 22 mm sheet steel/ST40 Drive power 22 kW Weight 13,500 kg. Three hydraulically driven rollers (one hydraulic motor per roller) - The rollers run in bronze plain bearings Hydraulic linear sub-roller adjustment Hard chrome-plated piston rods Hardened and ground rollers PILZ® Laser Validation BECKHOFF® CNC – Control with Ethernet technology and large touch screen DANFOSS® Precision Hydraul ...

I sell a 4-side brush machine suitable for windows, turrets, tables, etc. Futura MS120 Y1 X2, built in 2005 Working width 1200mm Working height 200mm Total weight 2500kg Configuration: Side grinding heads left - right H.170mm 2 underheads left - right nylon B.140mm Oscillating top head B.260mm Large grinding heads top - bottom B.1150mm Machine together with all the heads on the picture. Available the same.

Used Used Capsuler Nortan Unicap 35: Year: 1989 Condition: As Is Used Capsuler Nortan Unicap 35: Model: UNICAP 35 Year: 1989 Speed: 1.000 bph Type of capsules: Polylaminate Glass Direction: Clockwise Manual head adjustment 2 snare heads Capsules dispenser Code: BC 387 More details: https://bottlingscout.com

needles 3384 Find more here - .ucymachines/ Contact us at - sales@ucymachines

number of needles 3360 FB042 – Orizio – JOHN-TC Find more here - .ucymachines/ Contact us at - sales@ucymachines

Offered for sale is a pallet recycling machine from Winter Holztechnik. Max. feed speed: 20m/min, conveyor belt width: 1400mm, conveyor belt length: 3000mm, wheel diameter: 600mm, saw blade: bi-metal, saw blade length: 6150mm. Dimensions X/Y/Z: 3000mm/3000mm/1800mm, weight: approx. 1000kg. An on-site inspection is possible.

May SS80 U Machine can be visited by arrangement under power

MEP Multimatic SA8, year of construction 1995 Straightening and cutting system for reinforcing steel, fully automatic, complete functional system, immediately available Plant still in operation and can be demonstrated.

High-Load Analytical Sieving Machine, Used The ANALYSETTE 18 is the robust high-load analytical screening machine from FRITSCH. It effortlessly screens up to 15 kg of material between 20 μm and 125 mm. The three-dimensional screening movement ensures particularly fast screening results without manual post-screening and optimum reproducibility.The ANALYSETTE 18 is used for particle size analysis and fractionation of coarse-grained material. The feed quantity of a maximum of 15 kg for screening material and screen set also allows use in pilot line production or for serial testing of larger quantities. Preferably suitable for particle size analysis and fractionation of coarse-grained material by dry screening

Bread packaging machine Hartmann Automat GBK 220 -Sliced bread packaging machine Hartmann -Model Automat GBK 220 -Weight 1600 kg -Year of construction 1999

Good working conditions

M. No.: 167 Format (cm): 58 Equipment / Additional information: 1xreserve knife Very good condition // tested, checked and revised

Travel distances: 350 x 250 x 315 mm [ X x Y x Z ] Table size X: 576 mm Table size Y: 400 mm workpiece weight: 500 kg C-axis Pinole recording: EROWA

Bottle washing machine, Fabr. Krones, type: Lavatec KESK 245/17-120, control range 4,000 - 11,000 fl/h, for bottles with max Ø 105mm, built in 2002, Eind machine, with 180 rows of 17 bottles/row each, with pre-soft water and lye, main liquor with immersion switch and after-liquor spraying, 3 water sprays hot, cold and fresh water in stock from May!

Kemper Soft-Star dough dividing and warp knitting machine Head machine Kemper Soft-Star 6-row dough part and automatic knitting machine with plastic funnel. The maximum hourly output of the machine is 2400 pieces per row and for our machine a total of 14,400 pieces per hour. The clock frequency is 40 strokes per minute. The operating side is in the direction of travel on the left side. The active range of the active drum is between 50 and 60 grams. - 6 rows - with plastic hopper - with Siemens Touch Panel control - Year of construction 09/2004 Electrical data Operating voltage: 400/230 Volt 50Hz Control voltage: 24 Volt DC Rated current: approx. 4kW

REF-0 MANZINI (COMACO) CAN SEAMER FOR 3KG CANS Automatic can seamer manufactured by Manzini (Comaco) Model: A-350 Can size: 3kg Fitted with 3 seaming heads Power: 12HP Dimensions: 1,800mm width, 2,500mm length, 2,600mm height. Optional: 15-valve vacuum filling system for 3kg cans (vacuum pump included). Filling system dimensions: width 2,100mm, length 1,200mm, height 2,400mm.

WALDRICH SEIGEN WST IV H80 X 12000 ROLL GRINDER YEAR: 1981 / INSTALLED 1982 MAXIMUM GRINDING DIAMETER: 78” ( 1981.2 mm) WITH 32” (812.8 mm) DIAMETER WHEEL MAX DIAMETER CAPABILITY: 2500mm DISTANCE BETWEEN CENTERS: 472.40” (12000mm) MAXIMUM WORKPIECE WEIGHT: 176000 lbs. (80t) WHEEL OD MAXIMUM: 32.00” WHEEL WIDTH MAXIMUM: 4.00” WHEEL ID: 12.00” WHEEL SPINDLE POWER: 27 - 59/59 HP WHEEL DRESSER: BED MOUNTED ROLL WHEELHEAD TRAVEL: 25.60” TABLE TRAVEL: (WHEEL HEAD TRAVEL) 488.40”( 12405 mm) TABLE SPEED: (WHEELHEAD SPEED) 157.5 in/min (4000 mm/min) WHEEL SPINDLE SPEED: 450 - 1800 RPM Infinitely Variable WORKHEAD POWER: 1.9 - 59/59 HP WORKHEAD SPEED: .5 - 300 RPM WAYS: CAST IRON FULL HYDROSTATIC SLUDGE CONVEYOR: NONE COOLANT: YES FILTRATION SYSTEM: COMBINATION 2 CARTRIDGE AND FABRIC FILTER WAY COVERS: METAL TELESCOPIC POWER 3PHASE / 50-60 Hz / 200 - 50 ...

SCM st 1g Format circular saw milling machine Format sliding table in 1.2m Cutting height: 67mm 90° 40mm 45° Auslegertich kpl. Cutting width 700mm Saw blade: swivel 45°, max.250mm 1.8KW 2 motors 400V 50HZ Milling machine: rigid 90° Milling machine rpm: Speeds: 5000/7500 rpm. Milling stop max tool diameter max. 160mm Suction pipe 60 - 120mm Weight 190kg Eccentric tensioner G&STÜ-5501048

Technical data: Conveyor belt width: 150 mm Motor: 3 kW Weight: 490 kg Condition: Gebraucht Location: Tauberbischofsheim, Germany

Travel: 825 x 680 x 405 mm [ X x Y x Z ] Table size X: 1200 mm Table size Y: 850 mm workpiece weight: 3000 kg Electrode changer: 50 - fold Generator POCON 60 Pinole recording: EROWA Heavy Duty Adapter O-Module Halogen lamp

MORI SEIKI NT6600 CNC INTEGRATED MILL TURN CENTER WITH LIVE MILLING MAXIMUM SWING OVER BED: 42" MAXIMUM WORK PIECE DIAMETER: 42" MAXIMUM WORK PIECE LENGTH: 239" MAXIMUM BAR DIAMETER: 6.4" SPINDLE BORE: 7" X AXIS TRAVEL: 41" Y AXIS TRAVEL: 26" Z AXIS TRAVEL: 242" B AXIS: +/- 120 DEG. MAIN SPINDLE SPEED: 1500 RPM MAIN SPINDLE MOTOR: 40 HP MILLING SPINDLE SPEED: 8000 RPM MILLING SPINDLE MOTOR: 40 HP ELECTRICS: 220V/3P/60Hz/216A OAD (APPROXIMATE): 490" X 182" X 169" HIGH WEIGHT (APPROXIMATE): 120,560 LBS. EQUIPPED WITH: C AXIS YAXIS B AXIS LIVE TOOLING/MILLING 20" CHUCK FS-31iA5 CNC CONTROL 140 POSITION AUTOMATIC TOOL CHANGER PROGRAMMABLE TAILSTOCK COOLANT THROUGH SPINDLE (HIGH PRESSURE) CHIP CONVEYOR Additional Control Options: Automatic Power Shut-Off MAPPS 4 System Part Program Storage: 8mb Stored Programs: 1000 Remote Communication Function ATA Flash M ...

Label book printing machine, 4 colors, 3 colors, 2 colors or 1 color, punching unit, 2 embossing plates, various mounting plates, laminators, UV dryers, dispensers, slitter rewinders, scanner camera, in good condition, immediately available

Langbein double-saddle grinding bench with left/right feed for woodworking. Technical data: Clamping length per side: approx. 450 mm Spindle diameter: 45/35 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

KED II HDZ drum sander or belt sander for sanding timber and other materials. Technical data: Sanding belt: 300 x 1,010 mm Motor: 2.2 kW Dimensions (L x W x H) approx.: 1,050 x 600 x 1,000 mm Condition: Gebraucht Location: Tauberbischofsheim, Germany

Back punching machine Schmedt Präcut HHS 65; good condition; cleaned and tested; Block height max.350mm; Block thickness max.90mm; 3 replacement knives. Book block spine machine Schmedt Präcut HHS 65; good condition; cleaned and checked; max.block hight 350mm; max.block thikness 90mm; three knifes.

Saw blade chamfering machine Manufacturer: Loroch Type: AK Year of construction: 1991 For chamfering HSS and segment circular saws

MAW BEV electro-pneumatic pot-head drilling machine for drilling pot-head screws or fittings Technical data: Work surface: 300 x 37 cm Motor: 1.6 kW Weight: 180 kg Condition: Gebraucht Location: Tauberbischofsheim, Germany

WEINIG UNIVAR 10 automatic rebating machine from a UC-Matic window production line, not in working order. Technical data: Year of manufacture: 1997 Condition: Gebraucht Location: Tauberbischofsheim, Germany

Label book printing machine Labelmen PW180DLU, YOC 1996, 4 colors, punching unit, embossing device, various mounting plates, laminators, UV dryers, dispensers, Slitten rewinders, in good condition, immediately Available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

X-axis: 660mm, y-axis: 350mm, z-axis: 450mm, table clamping surface dimensions: 762x356mm, speed: 10-10,000/min, tool holder: SK 40 DIN 69871, number of tool changer stations: 20, rapid traverse: 28m/min, control: ULTIMAX 4, length: 2000mm, width: 1800mm, height: 2660mm, weight: 2.9t, with documentation, documents, hydraulic diagram and electrical circuit diagram. An on-site inspection is possible.

Offered for sale is a Risto fresh milk vending machine. Measuring medium: fresh milk 4°C to 6°C, calibration: milk with 3.5% fat, ambient temperature: -25°C to +55°C, accuracy: 0.5%, flow range: 0.7l/min to 3.5l/min, normal flow rate: 3.4l/min, minimum measured quantity: 200ml. An on-site inspection is possible.

Kölle planer, or ‘planer’ for short, for smoothing and levelling (planing) timber. Includes an adjustable angle stop and accessories Technical data: Working width: 600 mm Blade system: Z2 strip planing blades Condition: Gebraucht Location: Tauberbischofsheim, Germany

ACCTEK AKM2030 CNC router was built in 2020 in China by Jinan Acctek Machinery CO., Ltd. The machine is designed for the precise milling, cutting and engraving of parts made from materials such as wood, MDF and plastics. Its large work area, combined with a stable design, makes the machine ideal for both one-off projects and mass production. All machining processes are performed using a high-performance electro-spindle with a maximum speed of 24000 rpm. The rotational speed and torque are controlled by an inverter, allowing the operating parameters to be adjusted to suit the current task. The electro-spindle is also equipped with a cooling system, which helps maintain stable parameters during intensive use of the machine. Individual axes are driven by high-torque stepper motors. These move along precision linear guides, ensuring accurate positioning and repeatability of the parts p ...

Screening machine large, Terra St used, overhauled

Machine table for laser marking, stable design, aluminium electric height adjustment 36 cm by Rose+Krieger Additional mechanically adjustable height adjustment 4 frame feet - all adjustable Frame dimensions without table: H 121cm, W 88 cm, D 117 cm Table surface: W 80 cm x D 48 cm

Folder Gluer (folding carton gluer)

A Caser-Saimp universal milling machine in need of repair but still operational is offered. Spindle taper: ISO 40, table size X/Y: approx. 1300mm/265mm, travel X/Y/Z: approx. 750mm/265mm/430mm, max. spindle speed: 1700rpm, spindle drive power: approx. 4kW. The X-axis can no longer be moved using the power feed. A servo motor was retrofitted to the X-axis (white assembly). Inspection possible by arrangement.

Bed length: 4500mm, control voltage: 220V, operating voltage: 380V, rated current: 110A, rated current, slow-blow fuse: 125A, connected load: 58kW, weight: 35t, with tailstock, clamping device, external electric motor for roll rotation, control panel, storage table, five steady rests and additional accessories. An on-site inspection is possible.

Working area X/Y: 1500mm/3000mm, plasma source: NERTAJET HP120, control: DIGISAF 100, max. cutting capacity steel/stainless steel/aluminum: 20mm/15mm/20mm, wet and dry cutting possible, extraction system available. Documentation available. Inspection possible by arrangement.

Clamping force: 300kN, tie-bar spacing: 270x270mm, cylinder diameter: D15, control: Arburg Control+, automatic operating hours: 63.212h, pump operating hours: 63.212h, cycles: 15.328.195. An on-site inspection is possible.

Machine table for laser marking, lightweight design, aluminium electric height adjustment 36 cm by Rose+Krieger Additional mechanically adjustable height adjustment 4 frame feet - all adjustable Frame dimensions without table: H 121cm, W 88 cm, D 117 cm Table surface: W 80 cm x D 48 cm

Folder Gluer (folding carton gluer)

Clamping force: 500kN, tie-bar spacing: 320x320mm, cylinder diameter: D30, control: Arburg SLOGICA, automatic operating hours: 63.147h, pump operating hours: 65.755h, semi-automatic operating hours: 14h, cycles: 13.943.435. An on-site inspection is possible.

Calender

This 3-axis EMCO Emcoturn 65 was manufactured in 2018. It features a maximum machining diameter of Ø500 mm and a maximum machining length of 520 mm. The machine offers an impressive X-axis travel of 260 mm and Z-axis travel of 610 mm. If you are looking to get high-quality turning capabilities, consider the EMCO Emcoturn 65 horizontal turning machine we have for sale. Contact us for further details.

Vertical turning machine manufactured in 2007. This EMAG VSC 400 features a turning diameter of 400 mm and a swing diameter of 420 mm. It offers an X-travel of 850 mm and Z-travel of 315 mm, with a maximum spindle speed of 4000 rpm. If you are looking to get high-quality turning capabilities, consider the EMAG VSC 400 machine we have for sale. Contact us for further details regarding this machine.