folding machine used for sale

Serial Number: 075388 Year of Make: 2007 X 800mm Y 1000mm Z 700mm Measuring head SP80

Travel X/Y/Z: 560mm/500mm/450mm, tool holder: SK40, speed: 4000rpm, feed rate: 3.6m/min, rapid traverse: 4m/min, table dimensions X/Y: 530mm/900mm, max. table load: 450kg. Machine dimensions X/Y/Z: 2350mm/2200mm/2000mm, weight: approx. 2200kg, control: Deckel Contour 2. An on-site inspection is possible.

The Zafferani FLAT 8FPE L is an electronic straight-line glass processing machine designed for grinding and polishing glass edges. Here are the key specifications of this model: ⚙️Technical Specifications of the Zafferani FLAT 8FPE L Characteristic Specification Number of grinding wheels 8 Glass thickness 3–22 mm Minimum glass size 80 × 80 mm Working height 890 mm Feed rate 0.4–3.2 m/min (16–128 in/min) Weight 2,100 kg Installed capacity 11.0 kW Power supply 230–400 Vac This machine is ideal for precision machining of glass in industrial applications, such as windows, mirrors and interior glass. 02.1.209

An old but functional Kallfass shrink-wrapping machine is available. Seal length: 600mm, max. passage height: 260mm, film thickness range: 12µm-80µm, max. belt speed: 12m/min, max. cycle rate: 20/min, sealing frame dimensions X/Y: 800mm/600mm, max. film roll width: 750mm, working height range: 870mm-970mm, tunnel width: 605mm, tunnel height: 400mm, max. film roll diameter: 300mm, max. film roll core diameter: 76mm. Machine dimensions X/Y/Z: approx. 3400mm/1300mm/1450mm, weight: approx. 750kg. The drive motor is taken out but included. An on-site inspection is possible.

grinding length: 600 mm grinding width: 400 mm workpiece height: 500 mm total power requirement: 10 kW weight of the machine ca.: 5 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. wheel diameter: 400 mm gear width: mm max. module: Control: total power requirement: kW weight of the machine ca.: 4 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Fully functional.

COMPLETE SYSTEM SEGEM ERT110.5 5 KNIVES DURCHLASS110CM

Part Number: 7781 SPECIFICATIONS - Maximum milling height 216mm - Maximum milling depth 65mm - the largest cutter diameter is 250mm - spindle working length 500mm - spindle rotational speed 4600rpm - spindle diameter 40mm - max tool diameter 250mm - worktop length/width 890x400mm - 11kW motor - 2 material clamps – pneumatic - air demand 6-8 bar - diameter of the extraction port 160mm - dimensions l/w/h 1330x1200x1470mm - weight 970kg ADVANTAGES – Polish production – unpainted – used milling machine, very good condition Net price: 38900 PLN Net price: 9262 EUR depending on the price 4.20 EUR (Prices may change with higher fluctuations)

Mobile semi-automatic stretch film wrapping machine. Incl. integrated battery charger.

Semi‑automatic label dispenser, suitable for applying labels to cylindrical bottles.

max. format 36 x 36 cm Year of construction 2010 Banding device Computer control with monitor US 2000 Corner Slider CL Banding Station for paper and foil tapes max. stacking height 30 cm Mobile substructure Delivery date: immediately Price on request. We supply and install worldwide.

A flat steel bending machine for the production of ZB frames is available. Pneumatic pressure: 8bar, hydraulic pressure: 100bar, weight: approx. 5000kg. An on-site inspection is possible.

Heavy-duty TIG welding machine. TIG welding Welding range 3~ 400 V:[A] 3 - 300 TIG Duty cycle 400 V Duty cycle DC 100% (40°c):[A] 250 Duty cycle DC 60% (40°c):[A] 300 Duty cycle DC at max. current (40°c):[%] 60 Electrode welding Welding range 400 V:[A] 20 - 250 Weldable electrodes:[Ø in mm] 1.5 - 6 Electrode duty cycle Duty cycle at max. current (40°c):[%] 80 Mains 400 V Mains voltage 3~ (50/60 Hz):[V] 400 Cooling type: Water-cooled Dimensions length x width x height Dimensions (LxWxH)[mm] 1,130 × 450 × 815 Weights Weight:[kg] 93.6 Weight, water cooling (filled):[kg] 14.7

Travel X/Y/Z: 700mm/550mm/500mm, table dimensions X/Y: 1000mm/490mm, tool holder: SK40, speed: 3150rpm, quill stroke: 100mm. Machine dimensions X/Y/Z: approx. 3500mm/2500mm/2100mm, weight: approx. 3300kg, control: Heidenhain 415, operating hours: approx. 64000h. Including coolant pump and an enclosed length measuring system LS403C. Documentation available. An on-site inspection is possible.

Ref. no.: 18643 Manufacturer: ARBURG Year of construction: 2008 Clamping unit Clamping force: 150 ton Opening stroke: 500 mm Distance between tie bars: 470 x 470 mm Mould height min.: 250 mm Opening width: 750 mm Injection unit Screw diameter: 35 mm Injection volume: 154 cm³ Shot weight: 141 g Injection pressure: 2500 bar Measurements and weight Dimensions: 4,6 x 1,6 x 2,1 m Machine weight: 4850 kg Additional information & extras Core pull: 1 pcs Further information: Communication card for ProSeS interface is available (OPC-UA). Robot interface is available (EUROMAP 67). he Golden Edition is a special version of the well-established ALLROUNDER C series, known for its optimized hydraulic performance, stable production process, and high reliability. The machine has a clamping force of 150 tons and is ideally suited for the production of technical plastic parts as well as applications requ ...

A fully automatic side-seal strapping machine Joinpack is available. Load capacity: 50kg, speed: approx. 24rpm, strap width: 9mm/12mm/15mm, strap material: PP, strap tension range: 15kg/70kg, frame opening: 600mm/850mm, sealing height: 650mm. Machine dimensions X/Y/Z: approx. 1450mm/600mm/850mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible.

clamping force: 1500 kN injection volume: 141 g/PS screw diameter: 35 mm platen size: 470 x 470 mm Condition: used, Specification: horizontal injection moulding machine, Type: Allrounder 470C 1500-400 GE GOLDEN EDITION Injection unit: - Screw diameter: 35 mm (wear-resistant) - Centring ring diameter: 125 mm - Max. shot weight: 141 g (PS) - Injection pressure: 2,500 bar Closing unit: - Clamping force: 1,500 kN - Max. opening stroke: 750 mm - Mould installation height: min. 250 mm - Mould clamping plates: 470 x 470 mm - Approx. operating hours: 79,000 h (still in use) - Operating voltage: 3x 400 V, 50 Hz - Nominal motor heating current: 75 / 40 A - Total current: 115 A - Total connection: 65 kW - Core pulls: 1x - Hot runner control points: 6x - Temperature control unit interfaces: 6x (20 mA) - Approved for high temperatures  ...

1 gebr. Lattice beam processing plant, make Progress / GTA with infeed and outfeed working magazine and a double welding head Lattice girder processing station with multiple linear robots for storage & processing composed of: Auto. Storage system with handling beam Auto. transversely movable positioning carriage with 6 pcs lattice girder infeed tracks Lattice girder cutting machine Linear movable gripping unit (inlet gripper) Linear movable gripping unit (outlet gripper) Conveyor & buffer magazine, stacking beam Technical data: lattice beam height 70-300 mm, lattice girder width 70 - 90 mm, max. measuring/cutting length 10,000 mm, min. measuring/working length 800 mm, lattice carrier upper chord connecting welding system, for processing lattice girders type KT 800 in Heights from 70 - 360 mm and width from 70 - 90 mm

gebr. Cutting straightener Progress Ø 6 - 14 mm Outlet 8 m 5 reels Switchboard PC, Software Documentation

Neuweriger Doppelkopf make W. Müller. With WDS and filter

x-travel: 400 mm y-travel: 400 mm z-travel: 300 mm rapid traverse: 1,2 m/min feed range: 5 - 500 mm/min creep feed: 1:100 tool taper: ISO 40 stroke: v60 h70 mm table - universal: ca. 620 x 320 mm table vertical adjustable: 350 mm weight of the machine ca.: 1200 kg dimensions: mm Machine was used in a public facility and is in good condition. Machine can be viewed under power by prior appointment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Board machine Type: Tronic 140/90-22 Manufacturer: OMAG Year: 1996 The board machine built in 1996, has been operated continuously since it was commissioned in 1997. For sale is not only the block machine itself but also the entire production line, allowing full use of the system after purchase. Several components of the mixing plant (e.g. core and face mix mixers), the bucket conveyor, wet side, transfer platform, dry side, and package buffer were renewed in 2009. The block machine remained in operation until the end of 2024 and can be inspected in fully functional condition. MACHINE DATA Block forming machine Board machine manufactured by OMAG, type TRONIC 140/90-22, year of manufacture 1996 Production of core and face mix Control system: Simatic S5 with visualization by Frima Board size: 1,400 × 1,000 mm Cross cleaning Quick mould clamping, pneumatic Sheet pulling dev ...

1 TUPESA rotary garment dyeing and washing machine type STONE 550, capacity up to 550 Kg (constructor indication and depending on articles) drum diameter 1950 mm x depth 1700 mm (volume 5000 L)

Key data: 4

Technical data/equipment: 4 planing shafts Voltage 380 V/ 50 Hz Power consumption 20 kW Weight approx. 1500 kg More dates to follow The sale is carried out on behalf of the owner, in the condition as it is, excl. Warranty.

1 LAMPERTI shearing machine type C/L81, year 1988, shearing roller spirals width 200 cm, shearing roller equipped with 24 shearing spirals, entry with metal detector,

Counting forklifts / compensating stackers Max. format: 500 x 340 mm, number of pages tabloid 96, broadsheet 48 Min. format: 148 x 105 mm, number of pages tabloid 4, broadsheet 4 Can handle single specimens (distance min. 10 mm) or scale current (distance min. 40 mm). Lateral offset max. 5 mm. Specimen thickness max. 6 mm / Flow height max. 10 mm Layer height max. 170 mm / Package height max. 350 mm Height inbound min. 500 / Height of infeed conveyor max. 1250 mm

1 YAMADA Single End Sizing Winding machine Mod. YS-6 12 spindles year of construction 1998 with YAMADA TFB meter counter on each spindle squeeze roller sizing application type non-touch yarn break control sensor on each spindle take-up cylindrical traverse 150 mm (6 inch)

1 LAFER emerizing machine type GSI 124A, year 2000, roller width 220 cm, 6 brushing rollers with new ceramic brushing, entry and exit on the same side, with suction, touch screen, PLC and inverter controlled

3 SULZER rapier looms for terry type G6200 B260 F8 J28, width 260 cm, year 1998, STÄUBLI jacquard CX870, 2688 hooks installed, JC5 1 SULZER rapier loom for terry type G6200 B260 F8 J, width 260 cm, year 1996, STÄUBLI jacquard CX960 with 6144 hooks installed, JC4

1 SUCHY laminating machine type Laminator, year 2015 (machine has less than 1000 working hours), roller width 220 cm, working width 200 cm, consisting of: - Unwinder for fleece, - Unwinder for scrim (fabric web), - Unwinder for oil paper, - All 3 unwinders use 3" (76 mm) cardboard cores with pneumatic expanding shafts, - Heated roller with water heating (90 °C) and REGLOPLAS temperature control unit, - Cooling roller, - Pressure roller, - 3 longitudinal cutting devices with quadruple knives (200 mm diameter), - Cross-cutting unit with circular quadruple knife (110 mm diameter), - Rewinder for 3" (76 mm) cardboard cores, up to 1000 mm diameter, Speed: 0–10 m/min

1 BREITENBACH type Benjamin 3, 5-D high-performance continuous dyeing and finishing machine for elastic and rigid narrow fabrics (and bands, ribbons or tapes) made of polyamide, cotton or viscose year 1999 composed of: foulard dyeing padder roller width 300 mm with electrically heated vat, steamer capacity 34 m, 5 washing boxes each with squeezing padder and indirect steam heating, chemical finishing padder, hot air dryer capacity 50 m gas heated, exit for 4 tapes

1 JAKOB MÜLLER direct warper type MW 650, working width up to 650 mm, maximum flange diameter 600 mm, MÜDATA control, warper supplied without creel

10 SSM spindle control boards type PS6 PW1-F

1 JAMES HEAL Martindale abrasion resistance and pilling testing machine, 4 testing positions,

1 DGEN digital textile printing machine type ARTRIX H8 model 740TX/V H8BR, with DGEN standalone dryer type DR-180H3, year 2020, maximal printing width 1820 mm 8 colors, 1280 nozzles on each color, sticky belt fabric feeding system

2 FADIS hank winder / reeling machines type MR, year 1990 and 1988, 10 spindles / positions each machine

1 JAMES HEAL type Wascator FOM 71 MP-Lab Standardised European Washing Machine, approved for IEC and ISO standarts, capacity 7 Kg, power consumption 5,4 KW, voltage 400V, 3N, 50 Hz, material stainless steel, dimensions 740x640x1080 mm, net weight 160 kg, made in Sweden. Machine is in an immaculate condition and looks like new.

Year: 2000 - technically efficient, ready to work – after full service - 4 heads - support arms

1 TUPESA sample rotary garment dyeing and washing machine type TSP-2-CP, high temperature high pressure machine, year 2001, capacity 2 Kg, drum diameter 470 mm, drum depth 250 mm, drum volume 42 L, dye cycle controller TUPESA type RS-1, drum rotation 0-28 rpm, machine equipped with centrifugation process of 450 rpm, 2 addition vats. Machine designed to work with temperatures up to 140 ºC. This type of machinery is suitable for dyeing all types of garments such as polyester, polyamides, synthetic blends, etc.

1 TUPESA rotary garment dyeing and washing machine type TSP-25-CP, high temperature high pressure machine, year 2008, capacity 25 Kg, drum diameter 1100 mm, drum depth 610 mm, drum volume 580 L, dye cycle controller TUPESA type RS-BASIC PLUS touch screen, drum rotation 0-28 rpm, machine equipped with centrifugation process of 700 rpm, 5 addition vats. Machine designed to work with temperatures up to 140 ºC. This type of machinery is suitable for dyeing all types of garments such as polyester, polyamides, synthetic blends, etc.

1 TUPESA rotary garment dyeing and washing machine type TSP-55-CP, high temperature high pressure machine, year 2004, capacity 55 Kg, drum diameter 1250 mm, drum depth 1100 mm, drum volume 900 L, dye cycle controller TUPESA type RS-1, drum rotation 0-28 rpm, machine equipped with centrifugation process of 650 rpm, 5 addition vats. Machine designed to work with temperatures up to 140 ºC. This type of machinery is suitable for dyeing all types of garments such as polyester, polyamides, synthetic blends, etc.

1 MURATA rest cone winder type 7R-2, automatic cone winder for residual yarns, 5 spindles, year 1990, magazine feed with 12 cans, diameter of supply yarn 75 to 110 mm, individual knotters, exit cones traverse 6"=150 mm, conicity 4º20', winder can make cones up to a weight of 4 Kg, winding speed 1000 m/min

Unused plastic tube labeling machine for self-adhesive labels. New: 2022. Equipment for several tube diameters. Polish manufacturer.

Single-station machine up to 8 ltr. Extruder S 90/20D. Single head with viewing strip. With leak tester and conveyor belts. Good condition

Manufacturer: Komptech Model: Multistar Star Screen (including control unit) Find more here - .ucymachines/ Contact us at - sales@ucymachines

table length: Rohmateriallänge 6500 mm table width: Rohrdurchmesser max. 230 mm burner heads: 1 Control: CNC workpiece weight: 300 kg traversing speed: 91 m/min weight: 5750 kg dimensions of the machine ca.: 12900 x 2370 x 2650 mm Tube laser with T-loader Configuration 1. Bodor Power laser source 6 KW 2. Bodor Genius laser cutting head with autofocus 3. Bodor Thinker 3.0 control system 4. Pneumatic chuck 5. Adaptive adjustment of jaw clamping force 6. Follow-up servo blanking clamp 7. Support for composite clamping rollers 8. Active collision avoidance 9. Automatic tube inspection 10. Automatic tube edge detection and positioning 11. Automatic adjustment of cutting gas 12. Laser cutting process database 13. Air-saving continuous jet nozzle 14. Intelligent maintenance reminder 15. WIFI internet connection 16. Water cooler 17. Extraction system 18. Wear parts set 19. Auxiliary feeding dev ...

Printing Width: 330 mm Maximum Unwind Diameter: 1000 mm Maximum Rewind Diameter: 1000 mm All Station UV (GEW) Chiller Rolls Delam-Relam Cold foil Lamination Corona Treatment Web camera - BST Doble rotary die cutting station, 1 Gap Master Sheet cutting possible

Inv. Num. : 8799 Type: FO-10 Producer: TOS Created: 1958 Parameters: Maximum gear diameter: 1000 mm Maximum module: 10 Machine dimensions: 3120 x 1870 x 2525 mm Machine weight: 9000 kg

Printing Width: 330 mm Maximum Unwind Diameter: 1000 mm Maximum Rewind Diameter: 1000 mm All Station UV (GEW) Chiller Rolls Delam-Relam Cold foil Lamination Corona Treatment Web camera - BST Doble rotary die cutting station, 1 Gap Master Sheet cutting possible