folding machine used for sale

Key data: 1000 mm, 5 mm

Dräco segment bending machine Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 1000 mm Sheet thickness steel: 0.5 mm Sheet thickness aluminum: 0.8 mm Sheet thickness front: 0.5 mm Colour: grey Dimensions: 1500 x 600 mm Machine weight: 73 kg Upper bolster stroke: 65 mm without roller scissors without cutting device for cutting to length Opening width: 65 mm Bending angle (max.): 160 degrees Machine number: AGNU0055

METALLKRAFT MSBM 1520/35 PRO ist eine motorische Schwenkbiegemaschine für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsbreite 1520 mm; Biegeleistung: Stahl 4 mm, VA 3 mm, Aluminium 4 mm; Durchlass 200 mm. Antriebe Ober/Unter 1 kW je; Gesamt 4 kW; Gewicht ~2700 kg; Maße L2345×B1100×H1560 mm. Erzielt enge Toleranzen; Einsatz: Automotive, Maschinenbau, Luftfahrt, Medizintechnik, Uhren. Technische Daten ohne Gewähr

FASTI 2095 - 12/3.5 ist eine Schwenkbiegemaschine, konzipiert für Präzision, hohe Genauigkeit und Zuverlässigkeit. Arbeitsbreite 1270 mm; Blechdicke max. 4 mm (bei 40 kg/mm2); Öffnungsweite Oberwange 350 mm; Verstellbarkeit Unterwange 80 mm. Antriebsleistung Ober/Unterwange je 2 kW; Anschluss 50 Hz 3x 400 V; Gewicht ca. 1480 kg; Abmessungen L2310×B810×H1500 mm. Zubehör: Biegeschienen, Fußpedal. Erzielt enge Toleranzen; typische Einsatzbereiche: Automobil, Luftfahrt, Werkzeugmaschinen, Uhrmacherei, Medizintechnik Technische Daten ohne Gewähr

: neu : ca. 10 Wochen ab Auftrags : Türkei : 41000 € : 783.1 € : 3200 mm : 1 mm : 0.6 mm : 15 mm : Motorisch : 155 ° : 110 mm : 4500 mm : 2100 mm : 1650 mm : 2900 kg : 750 mm : 300 mm/s : 0.1 +/- mm : 20 mm : 100 °/sek : 90 mm/s CNC CONTROL WITH TABULAR PROGRAMMING - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page BACK GAUGE 750 MMwith servo drive, pull back sliders to create space for down flanges at the back of the bot ...

: neu : 2025 : 080093 : prompt, Zwischenverkauf v : Türkei : 6130 € : 118.31 € : 1 : 1050 mm : 1.5 mm : 1 mm : 2.2 mm : 150 ° : 500 mm : 200 mm : 1300 mm : 750 mm : 1515 mm : 280 kg : Verstellbereich 35 mm Sectioned upper- lower- and bending tool, material 42CrMo4, hardened to 60HRC Manual back gauge Adjustable angle gauge Shelve and box for tools Machine on rolls with brakes Operating manual in German or English The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 10 Wochen ab Auftrags : Türkei : 61800 € : 1168.02 € : 2550 mm : 2.5 mm : 1.5 mm : 3.5 mm : Motorisch : 3830 mm : 2200 mm : 1900 mm : 4050 kg : 1000 mm CNC control with tabular programming - 15,6", touchscreen controller on swivel arm - tabular programming by entering the axes values - open or drop hemming function - multi radius bending function as by pressing or by bending - programming of material quality, thickness, spring back, bending correction and creating a data base for every type of material, thickness and length - piece counter - autorisiation with password - 128GB HDD allows almost unlimited data storage - remote service connection via WLAN - detailled alarm, tool and paramter page Motorized drive (servo motors) of the upper and bending beam (Z and Y axes) Motorized back stop (X axis) with servo drive, 1000 mm, rectangular configuration, with ball roller ...

: gebraucht : 2020 : 080210 : prompt, Zwischenverkauf v : 1170 € : 1 : 1020 mm : 2 mm : 2 mm : 1 mm : 3 mm : 135 ° : 46 mm : 1350 mm : 960 mm : 1145 mm : 282 kg suctioned upper tool sectioned bending tool clamping by foot pedal operating manual with EC declaration of conformity in German BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:https://www.hesse-maschinen.com/en/lp/used-machines The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 4040 mm

used Schechtl manual bending machine, with manual roller shears, The HA 400 machine is equipped with a 20° sharper rail, R1mm, one insert rail each 68/10 mm and 68/24mm as well as a support grate. Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Working length: 4040 mm Sheet thickness steel: 0.8 mm Sheet thickness aluminium: 1.25 mm Sheet thickness front: 0.50 mm Colour: green Dimensions: 5013 x 750 x 1300 mm Machine weight: 2230 kg manual roller shears Opening width: 120 mm Bending angle (max.:) 180 degrees Underbeam adjustment 20 mm Machine number: 23405

Horizon ED-40 Standing Delivery Unit - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Horizon ED-40 Standing Delivery Unit Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Horizon ED-40 Standing Delivery Unit Price: 5000 EUR Download PDF Horizon ED-40 Standing Delivery Unit Manufactured by Horizon, Japan. Can be connected to any Horizon folding machine, but also works with Heidelberg, Herzog Heymann, MBO, etc. The device also operates independently of the folding machine. Infinitely variable delivery speed adjustment. Height adjustment. Package counter with shif ...

Impressions=0 m, Condition= New , Availability= 2026-08-20, Side-glued boxes (straight-line boxes), crash-lock bottom boxes, and double-wall boxes Suitable for 4- and 6-corner boxes Feeding Section (including Servo Feeder) Pre-Folding Section Bottom Gluing Unit – Left Side Top Gluing Unit Motorized Trombone Section Folding and Closing Section 3 KQ” Brand Cold Glue Guns Pneumatic Press LED Screen Maximum board weight: 800 g/m² Board types: N, E, F & B Maximum speed: 300 m/min Maximum thickness: 12 mm

Impressions=0 m, Condition= New , Availability= 2026-08-20, 4 & 6 Point Gluing Adjustable Feeding Unit Alignment/Correction Unit Pre-folding Unit Bottom Lock Unit Bottom Gluing Unit Final Folding Unit Drop Unit Pressing Unit Pneumatic Pressure Adjustment "KQ" Brand Glue Gun Max. Cardboard Weight: 800 gr/m² Cardboard Type: N, E, F & B Flute Max. Speed: 300 m/min Max. Folded Box Thickness: 15 mm

Key data: 2020 mm, 1 mm

used Teko manual bending machine Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 2020 mm Sheet thickness steel: 1.25 mm Sheet thickness aluminium: 2.00 mm Sheet thickness front: 0.70 mm Colour: green Dimensions: 630 x 660 x 1155 mm Machine weight: 220 kg Upper beam stroke: 140 mm without roller scissors Bending angle (max.): 120 degrees Machine number: 163/141

Key data: 1640 mm, 3 mm

Max. bending length: 1640 mm Max. sheet thickness: 3 mm steel Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via switches Manual backgauge with spring fingers Weight: approx. 1600 kg

Key data: 1020 mm, 2 mm

Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Good condition Weight: 400 kg

Max. bending length: 3240 mm Max. sheet thickness: 4 mm steel Upper beam stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Central lubrication Instruction manual

Width 66 cm Year of manufacture 1989 Flat pile feeder TREMAT Counting device EVZ 30 1st station: 6 fold pockets 66 cm 2nd station: 4 fold pockets 56 cm 3rd station: 2 fold pockets 56 cm Standing sheet delivery SBP 46 Delivery date: immediately

Incl. pallet Auction-ID: A1-49606-290

Incl. pallet Auction-ID: A1-49606-298

Incl. pallet Auction-ID: A1-49606-288

Incl. pallet Auction-ID: A1-49606-292

Incl. pallet Auction-ID: A1-49606-291

Incl. pallet Auction-ID: A1-49606-295

Incl. pallet Auction-ID: A1-49606-296

Incl. pallet Auction-ID: A1-49606-293

Incl. pallet Auction-ID: A1-49606-294

Incl. pallet Auction-ID: A1-49606-289

sheet width: 1020 mm plate thickness: 2,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 0,40 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1640 mm plate thickness: 3,00 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 1,60 t dimensions of the machine ca.: m Manual and automatic bending cycles possible Bending angle adjustable via potentiometer Clamping beam lift and material thickness selectable via switches Manual backgauge with spring fingers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 6200 mm, 3 mm

Hydr. Long bending machine 6.2 m x 3 mm with controlled backgauge and 8-angle control

- Pallet Feeder - Digital control - 1. Station 4 buckles - 2. Station 4 buckles - mobile Knife VFZ-52 - SBP-66+MKE-VE delivery

- Flat pile feeder - Tremat - 1. Station with 4 buckles - 2. Station with 4 buckles - KB Station with 1 knife - Mobile stream delivery SKP-66+MKE

sheet width: 2500 mm plate thickness: 3 mm weight of the machine ca.: 1,7 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Folding carton cartoner Manufacturer: Uhlmann Type: C2155 Year of Make: 2008 Intermittent folding carton cartoner Uhlmann C2155 The machine has the following standard and optional equipment: Basic machine in balcony design with increasing package transport for cartoning blisters. Stacking capacity max. 400 blisters / min. Format quick-change system Servo-controlled, format-neutral blister counting system Continuous transport of packaged goods, container carrier 87mm high Packet stack monitoring, detection of over- and undernumbering Horizontal folding carton magazine, automatically raises, length 1,500mm Rotary folding carton feeder, incl. FS presence control Servo-controlled folding carton transport incl. digital adjustment to FS length and overload protection Swivelling and position-monitored FS cover rail, incl. digital adjustment at FS height Servo-co ...

Auction-ID: A1-49382-11

: neu : ca. 12 - 14 Wochen ab Auf : Deutschland : 1 : 4010 mm : 1.25 mm : 2 mm : 1.25 mm : 4 : 4 : 1130 mm : 180 mm : 915 mm : 2.2 kW : 5200 mm : 1435 mm : 1980 mm : 2600 kg : 145 ° hydraulic drive standard control additional rail on the bending beam 2x foot pedal removeable material support safety equipment accoring to the control rules BG Germany OPTIONS AS ROTARY SHEAR, CNC CONTROL, BACKGAUGES … ON REQUEST Prices ex works Germany. Transport and commissioningat customers place on request. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Folding Box Cartoning Machine Manufacturer: Uhlmann Type: C2504 Year of Make: 2008 For packaging blisters in FS cartons Output max. 500 folding cartons/min, the max. speed depends on the format/product Format range folding box max. W 80, H 90, L 155 mm For plug-in tabs offset on both sides or equilateral Blister stacking device, 2-fold max. 10 blisters per stack / max. height 85 mm Blister refill chute, manual 3 suction arms for folding carton transfer and counter-suction cup for pre-crushing Brochure folding and inserting machine MB-Bäuerle CAS 21/4 net from the magazine Colour embossing printing unit on both sides Incorrect packaging ejection with counter-control New in 2020: HMI B+R Automation PC, control IPC Beckhoff Elau MC-4 servo controller with Elau C600 controller Drive 400V/50Hz, rated current 6A / fuse 25A Various accessories such as format parts / ...

Equipped with: HHS gluing system with 3 heads, Hoson automatic folding-gluing machine type ZH-880PFTJ (2017), suitable for folding and gluing cardboard packaging with a working width up to approx. 880 mm, production speed up to approximately 250 m/min, capacity up to approximately 25,000 pieces per hour, dimensions 9.0 × 1.4 × 1.3 m, weight 2,300 kg and equipped with a 380V 3-phase connection with a power of 6 kW. Auction-ID: A1-47361-2

sheet width: 2100 mm plate thickness: 3,0 mm distance between columns: 2450 mm daylight opening: 160 mm : max. 150 ° back stop - adjustable: 6,0 - 1000 mm Control: CNC total power requirement: 5,37 kW dimensions: 3250 x 2450 x 2100 mm weight of the machine ca.: 3850 kg ORIGINAL PRICE: ~ 60,000 EURO Features: - ERBEND 15.6 CNC control panel operating unit - Electric backgauge from 6.0 to 1,000 mm Material support table with ball rollers Drive with servo motors - LED machine lighting - 1x 30° upper tool - radius 1.0 mm - 1x bending rail 15 mm / 1x bending rail 25 mm - Electric safety device at the front (light barriers) - Freely movable foot control - Operating instructions - CE declaration Special accessories included: - Split gooseneck upper tool, height = 90 mm - CNC electric motorized lower beam adjustment - Manual crowning of the bending beam The data for this ad was created wi ...

sheet width:5040 mm plate thickness:2 mm total power requirement:12 kW weight of the machine ca.:9,4 t dimensions of the machine ca.:6200× 1300 ×1900 mm working width:5000 mm control:Fasti Matik stroke of upper beam:500 mm adjustment of lower beam:u.Biegewange 80 mm control cabinet:1000 x 850 x1450 mm Documents:vorhanden

Specifications / Technical Data S-1000 CNC-Fraese and Engraving Machine The almost largest CNC machine in the High-Z series. With an external dimension of approx. 1350 x 800mm still handy enough and extremely powerful. With the High-Z CNC unit, they acquire an all-round talent in TUeV-certified quality (EMC). Whether you want to clamp complex parts on a groove table or, or to clamp factory tins into a high vice (the machine is on a frame construction, is driven in X via 2 motors and thus allows to be placed completely over a part to be machined). or simply want to do engraving or drilling then they simply work on a flat base, on which they then attach e.g. an MDF plate, which they once overfrave plan and are then able to work up to approx. +-0.02mm exactly in depth. All CNC portal fraes machines are supplied with coloured energy chains on all axes due to the improved cable guid ...

Carrier bag machine / SOS block bottom bag machine with flat inside handle unit Bag width: 14-32cm Tube length: 35-70cm Bottom width: 6-20cm Reel width: 107cm max Hot Melt unit for handles Web guide system for handles Foto cell unit for preprinted paper Aprox 7 former plates Option: 4 colour tail end printer (ref. S294)

Motor power: 1,5 kW. Max. mortise width: 180 mm. Max. mortise depth: 180 mm. Chain width: 2x10 mm. Machine dimensions: 600x950x1900 mm. Weight: ~200 kg.

A good sample preparation in metallography (materialography) starts at the correct separation with a wett cutting machine. Good and proper separation prevents the burning and destruction of the material change in its structure and is the best way to save time and consumables. The separation is performed incorrectly is this very elaborate grinding and polishing extremely high overhead "punished"! Wet cutting machine cutting. Wet abrasive cutting | Separating SCHNEIDER METACUT 251 The head of the cutting grinding machine with built-in blade is lowered by a hand lever on the sample. METACUT 251 separating cutters are available exclusively in manual versions. This is usually not a disadvantage: the specimen geometry changes / separation task all the time, so can hinder the establishment of an automatic cut-off grinder. The workpiece is clamped at METACUT 251 - cut-off machines and the de ...

FORCIPOL - the quality grinding machine / polishing machine for metalography that is cheap on the market - from the simple grinding machine for manual preparation to the semi-automatic machine - The FORCIPOL series is modular and can be assembled as required FORCIPOL 102: Basic grinding machine / polishing machine with a grinding wheel 250 mm and basic control FORCIPOL 202: as before, but 2 grinding wheels 250 mm For rationalization and reproducible cuts (can be combined with FORCIPOL 102 or 202): FORCIMAT 52: Sample wineer head with simple control FORCIMAT 102: Sample winer head with programmable control For the supply of lubricants and suspensions (only IN the case of FORCIMAT 52 / 102) DOSIMAT 12 - Lubricant Dosing Device DOSIMAT 52 - Lubricant and suspension dispenser (adjust integrated internal control on the device) DOSIMAT 102 - Lubricant and suspension dispenser  ...

Copying fraes machine Kuhlmann Type GM 1-2 Machine in very good condition. Optional: very extensive access at an additional cost Zubehoer s/he/sheers, milling spindles, sub-machines for circular copying, written fonts, fraesstichel with quick-change device, copy spin, Radient template for radii in 0.5mm rising, clamping devices, Stencils and much more! Special price Tool cabinets milling spindle spindle grasses engraving fonts brass copper table