folding machine used for sale

Booklet machine Multi-functional machine construction to produce 16 page leaflets with a glued back with a size of 95x78 mm. The machine components are: Component 1 - Folding Machine - Manufacturer: MBO - Type: T530-I-53 - Year of Manufacture: 2011 - Integrated glue system - Year: 2013 - Machine equipped with silencing boxes - CE marked Component 2 - Cut and Punching Unit - Manufacturer: Bograma AG - Type: BS ECO 350/160/15 - Description: 2-phase cut and punching machine - Year of Manufacture: 2006 - CE marked - Technical documentation included Component 3 - Delivery and Compression Unit - Manufacturer: Herzog + Heymann, Bielefeld, Germany - Type: 271 - Year of Manufacture: 2011 - CE marked Find more here - .ucymachines/ Contact us at - sales@ucymachines

Offer 26091 Technical data: - Max. working width 3200 mm - max. material thickness at 40 kp / mm² strength 2.5 mm - Bending angle adjustment electronically pre-selectable 0 - 180 ° - Operation via hand or foot switch - Largest opening width / stroke of the upper beam 200 mm - Height adjustability - bending beam 80 mm - the lower beam 90 mm - Upper bolster drive approx. 400 V / 1.8 kW - Bending beam drive approx. 400 V / 2.6 kW - Space requirement approx. W 4200 x H 1550 x D 2200 mm - Weight approx. 3800 kg

Size: 350 x 500 mm

Key data: 1020 mm, 3 mm

Max. bending length: 1020 mm Max. sheet thickness: 3.5 mm steel Bending rail ground Weight: approx. 1000 kg

Pile feeder - Tremat head 4 buckles Anti-noise hood Batch counter Compressor Belt delivery

Fully automatic Rotary feeder 1st unit : 6 buckles RFH-82 2nd unit : 4 buckles BUH-82 3rd unit : 4 buckles BUH-66 SPH-70 belt delivery

Rotary feeder R530 6 buckles Gate folder MBO A56-DC-24 delivery

sheet width: 1250 mm plate thickness: 1,5 mm distance between columns: 1300 mm daylight opening: 80 mm : 155 ° total power requirement: Handbetrieben weight of the machine ca.: 0,18 t dimensions of the machine ca.: 1,4 x 0,8 x 1,3 m Segment-bending machine Segment widths: 2x50mm,1x70mm,2x75mm, 2x100mm,4x150mm, 1x170m. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pile feeder F530 1st unit 4 buckles 2nd unit 4 buckles 3rd unit 4 buckles Batch counter A56-DC-24 delivery

MBO K 800.2 SKTL/6 AUT year 2007 pallet feeder 6 buckles 2 knives 1 side buckle Navigator control Compressor Palamides Delta 703 year 2006 good condition in production available immediately

Used Pablo cartoner type Pablobox 546. The device forms cartons, glues after manual loading of the product, closes the carton and glues. Year of construction 2020. CE

Used Fully Automatic Glass Jar Packaging System With Carton Forming Machine (Wrap Trays) In addition to packing products of the same type in cartons, it is also possible to automatically mix products sold offline. (Conveyor belt feeding for mixed cartons). The line includes: – Buhmann cartoning machine type C300, weight 1200 kg. – Buhmann packer type PF 800, weight 7500 kg. Performance: Online product launch – max. 280 jars/min Mixing Type A – 140 jars/min Mixing type B – 140 jars/min Total capacity (online,A,B) max.300 jars/min Cartoning machine for forming cartons and applying lids – 23.5 cartons/min Year of construction: 2016 Working hours: 5000h

Gr. working width: 4040 mm for sheet metal with a strength of 40 kg up to: 3 mm Upper bolster adjustment: 400 mm Underbeam adjustment approx.: 80 mm Max. bending angle adjustment electrically up to approx.: 180° Upper bolster variable speed drive: 4 kW Bending beam drive: 2 x 3 kW Back gauge, working range: 10 - 750 mm electr. Connection: 400 V Weight: 9 t Space requirement: 5570 x 2250 x 2000 mm high

Inv. Num. : 9062 Type: OHP 6 Producer: ZAKO Created: GO 2023 Parameters: Control system: FENIX Maximum sheet metal plate width: 6000 mm

Width 66 cm Year of manufacture 2007 Automatic Paper Folding Machine Computer control with touch screen Flat pile feeder FFH Automation Kit Feeder Double Suction Wheel 1st station: 6 fold pockets 66 cm Automation Kit II Automatic folding pocket adjustment Automatic folding roller adjustment Upstream knife shaft Downstream knife shaft 2nd station: 4 fold pockets 66 cm Automation Kit II Automatic folding pocket adjustment Automatic folding roller adjustment Upstream knife shaft Downstream knife shaft Palamides delta 703 Bundling Machine Delivery date: immediately

Key data: 6400 mm, 2 mm

Double bending machine, type TwinPro, with roller shears, Attachment rail, brush table, autom. Sheet thickness adjustment, pneum. Clamping finger Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 6400 mm Sheet thickness max. steel:2.0 mm Sheet thickness max. aluminium: 3.0 mm Sheet thickness max. VA: 1.25 mm Back gauge (min.): 15 mm Back gauge (max.):1125 mm Projection: 1300 mm Colour: anthracite/light grey/silver Total power requirement: 20 A Weight: 9250 kg Upper beam lift opening width: 200 mm with sheet thickness adjustment Bending Angle (Max):140 degrees Crowning on the bending beam Roller shears: SL3/3.0 mm Number of stands: 6 pieces Insertion depth: 1300 mm Machine number K14023

Key data: 6020 mm, 1 mm

with hand lever control, manual roller shears, robust and easy to operate Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is being carried out Working length: 6020 mm Sheet thickness steel: 1.2 mm Sheet thickness aluminium: 1.5 mm Colour: green Total power requirement: 1.5 kW Dimensions: 6600 x 1700 mm Machine weight: 1800 kg with roller scissors Bending angle (max.): 135 degrees Insertion depth: 960 mm Upper beam stroke: 140 mm Maschinennummer/machine number 6961

Key data: 2500 mm, 1 mm

with segmented tools on the upper beam, Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 2500 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminum: 2.0 mm Sheet thickness front: 1.0 mm without backgauge (max.) Colour: green Total power requirement: 400 V Machine weight: 2200 kg Dimensions: 3500 x 1800 x 1600 mm Machine Number: 1808

Offer 26114 Technical data: - Bending process is carried out by hand, supported by counterweight - Clamping of the upper beam via eccentric lever + foot pedal - Max. working width 2040 mm - Max. material thickness St 40 1.00 mm - Bending angle adjustment via end stop 10 - 180 ° - max. stroke upper beam approx. 70 mm - Max. adjustability bending beam 10 mm - Space requirement approx. W 2800 x H 1200 x D 900 mm - Weight approx. 520 kg - various bending rails as shown

sheet width: 1020 mm plate thickness: 2.5 mm : 45.0 mm bending angle max.: 0 - 135 ° weight of the machine ca.: 285 kg range L-W-H: 1175 x 850 x 1175 mm Description: Swivel bending machine with patented hydraulic auxiliary cylinder and Remote control. The machine is both manual (for thinner sheets) and motorized (for thick sheets) operated. The motorized function is over a remote control operated with an emergency stop. Version S - with segmented upper beam for boxes and special profiles - Max. Bending angle 135 ° - Max. Opening upper beam 45 mm - The HS Ergo is a further developed machine that uses a patient hydraulic auxiliary cylinder is supported - The machine is both manual (for thinner sheets) and motorized (for thick sheets) operated. - the motorized function is operated via a remote control with emergency stop The data for this ad was created with ModulMWS - the software so ...

Offer 26084 Technical data: - Max. working width 2040 mm - max. material thickness at 40 kg / mm² strength 4 mm - Bending angle adjustment electronically pre-selectable 0 - 135 ° - Automatic follow-up control for a complete workflow - Largest opening width / stroke of the upper beam 350 mm - Height adjustability - bending beam 100 mm - The lower beam 100 mm - Upper bolster drive 400 V / 4 kW - Bending beam drive 400 V / 4 kW - Bending beam adjustment - Backgauge adjustable with handwheel - E-foot button - Space requirement with back gauge - approx. W 3200 x H 1650 x D 2100 mm - Weight approx. 4500 kg

Max. size= 120 x 52 cm, Availability= 042026, flat pile feeder creasing station knife perforation 2 parallel folds hotmelt glue unit Delivery with pressing device Feed rollers recoated in 2022 Various accessories for perforation, gluing, and creasing Max size 52 x 120 cm Min size 15 x 20 cm paper stock range Creasing 80 - 500 gr/m2 paper stock range Folding 150 - 500 gr/m2 Speed A4 1 creasing 12.500 cp/h LOT Loaded in truck or container

Key data: 3000 mm, 4 mm

Used folding machine of the brand Hera type 3000x4 Year of construction 2000

Key data: 3000 mm, 4 mm

Hydraulic Swivel Bending Machine -Heavy welded construction -centrally driven bending beam -Hydraulic drives -Standard stroke 400 mm -Cybelec control screen retrofitted Machine is fully functional Year of construction 2000 With honeysuckle foot splints 100 mm and various accessories Viewing possible by appointment LxWxH approx. 5000 mm 2500 mm 2700 mm Weight approx. 8500 Kg

Panel bender Brand : FinnPower Mod. EB4 - 2150 max length = 2150 mm. Minimum length between folds = 350 mm Max width between folds = 160 mm. Maximum length = 2150 mm. A few new boards are also supplied with the machine

2 pocket folding machine for A4 and A3 on compressed air and vacumme. New delivery tracks. Available immediately.

4 Buckles Digital program with counter Air compressor Belt delivery Rollers in good condition Rings for perforating and creasing Very well maintained (small printer) In full working condition

Reference Num.: 3684 Brand: MB Bäuerle Type: Multimaster CAS 52/4 Construction year: 1996 Available: directly Status: In production Location: Deutschland Equipment: - 4 Falztaschen - Papierformat max. 52 x 72 cm

Key data: 6020 mm, 1 mm

used hydraulic Jorns long bending machine, with 5 wide stand units, with SN 1.25 motor scissors, bending beam width 16mm, with emergency/stop rail, foot switch, Control on the swivel bracket OP, with resettable sheet metal supports in the lower beam Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length 6020 mm Sheet thickness max. steel 1.25 mm Sheet thickness max. aluminium 2.00 mm Sheet thickness max. VA 0.80 mm Projection 1000 mm Total power requirement 16 A Dimensions approx. 6800 x 1650 mm Weight 3200 kg Upper beam stroke (opening width) 200 mm Bending angle (max) 140 degrees Roller scissors yes Number of stands 5 pieces Insertion depth 1000 mm Color: Blue Machine number 9453-07

Size: 520 x 850 mm Equipments: 4 Plates 1st Unit Automatic Fold Plate Setting Automatic Paper Thickness Measurement Control Panel 7 Pre-programmed Standard Folds Electrical double-sheet- control Flat pile feeder MB CAS 52 Multimaster Computer Controlled Folder Memory for 60 Repetitive Jobs Mobile delivery Semi Automatic Fold Roller Setting

max. format 68 x 104 cm Year of construction 2003 Navigator Control Rapidset - motorized format adjustment of the folded pockets Pallet feeder FP 700 Vaculift Vivas (Vacubelt + Vacutable) 1st station: 6 fold pockets 68 cm Downstream knife shaft 2nd station: 4 fold pockets 68 cm Downstream knife shaft Gluing device HHS for cold glue Shed Extension ASP 66-2 ME Delivery date: immediately from stock

Width 82 cm Year of construction 2015 Round Stack Feeder RFH-82 1st station: Knife shaft station SSP 82 2nd station: 6 fold pockets 82 cm Folding rollers Extra-Grip Automatic folding pocket adjustment Automatic folding roller adjustment Dual current device Standing sheet delivery SBP 86 Fully overhauled and workshop tested Machine condition: cleaned Delivery date: immediately

Width 52 cm Year of construction: 2011 Round stack feeder Extended infeed table 1st station: 10 fold pockets Roller diameter 46 mm Double downstream knife shaft 2nd station: 4 fold pockets 52 cm Roller diameter 40 mm Double downstream knife shaft Downstream knife shaft Counting device MC-Control Shed Extension ASP 66-2 ME new suction wheel, new infeed belt, new folding rollers, workshop tested Machine condition: cleaned and checked Delivery date: immediately from stock

Gr. working width: 1020 mm for sheet metal (at 40 kg strength) up to: 2 mm kl. Tail width: 10 x s kl. Inner radius: 1.5 - 2 x s Upper beam opening width: 190 mm Highest working point of the upper beam: 120 mm Lower beam positionability: 60 mm kl. Box profile (WxH): 165 x 125 mm Space requirement (WxD): 1700 x 550 mm Height with raised counterweight: 1650 mm Weight: 560 kg

Size: 660 x 1040 mm Equipments: Feeder: Feeder Mode: Palet feeder Type: PFH-66 Control Unit: MCT control panel Air Stream Table Folding Units: 1st unit Type: BCUH-66 Year: 2009 Pockets: 4x Pocket Type: Combi folding plates Pocket Configuration: manual setting Rollers Configuration: manual setting Roller condition: used condition Cross fold unit with 2x knives Second Knife aligned to: Left & right Noise Protection Hood Monitor Screen Delivery: Delivery mode: Horizontal stack press delivery Type: SBP-M 46.D Technical Details: Sheet size max: 660 x 1,040 mm Pallet feeder max capacity: 800 mm height Sheet size min: 140 x 180 mm Max. mechanical speed: 200 / 230 m/min

A Thalmann long folding machine with a touchscreen control system renewed in 2025 is available. Working width: 8200mm, usable width: 8000mm, max. sheet thickness: 3mm, max. upper beam opening: 150mm, bending beam width: 12mm, feed rail: 12mm. Documentation available. An on-site inspection is possible.

Key data: 2040 mm, 6 mm

Max. bending length: 2040 mm Max. sheet thickness: 6 mm steel Upper beam stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Motorized adjustment of the bending beam with digital display (adjustment of the sheet thickness) Manual backgauge with spring fingers up to 1500 mm 5700 kg

sheet width: 2540 mm plate thickness: 2,50 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 2,00 t dimensions of the machine ca.: m Motorized backgauge with flip-up stops, up to 1500 mm Multiple program sequences with varying bending angles and stroke heights possible Multibend 2000 control system Ground bending beam The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A Friedrich Krupp flanging and grooving machine is available. Usable length: 390mm, min. container body diameter: 85mm, max. sheet thickness: 0.4mm, flywheel speed: 75rpm, weight: approx. 1000kg. An on-site inspection is possible.

Motor power: 5.4kW, max. sheet thickness: 3.5mm, max. clearance: 200mm, max. bending capacity stainless steel/aluminum: 2.6mm/4.2mm, machine dimensions X/Y/Z: approx. 3650mm/1100mm/1600mm, weight: approx. 4500kg. An on-site inspection is possible.

sheet width: 1020 mm plate thickness: 2 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

- PFH 82 pallet feeder - Digitale Control - 1. Station with 6 buckles - Crossfold-Station with 2 knifes - VSA 66 mobile delivery

Inv. Num. : 9199 Type: BM 6.1.5 Producer: BIEGEMASTER Created: 2016 Parameters: Maximum sheet thickness (ordinary steel): 1 mm Maximum sheet thickness when bending (aluminium): 2 mm Maximum bending angle: 135 st Power: 4 kW Machine weight: 3800 kg Length: 7430 mm Width: 1840 mm Height: 1950 mm Equipment: Technical documentation Foot control

Labellers for folding cartons Manufacturer: Neri Model SL 200 Type 1 TA

Labellers for folding cartons Manufacturer: Neri Model DL 200 Type 2 TA

Offer 26016 Technical data: - Max. working width 2040 mm - max. material thickness at 40 kg / mm² strength 4 mm - Bending angle adjustment electronically pre-selectable 0 - 135 ° - Automatic follow-up control for a complete workflow - Largest opening width / stroke of the upper beam 350 mm - Height adjustability - bending beam 100 mm - The lower beam 100 mm - Upper bolster drive 400 V / 4 kW - Bending beam drive 400 V / 4 kW - Accessories - motorized bending beam adjustment - Backgauge adjustable with handwheel - E-foot button - Space requirement with back gauge - approx. W 3200 x H 1650 x D 2100 mm - Weight approx. 4500 kg

horizontal cartoning machine CAM Type AV Format: A 20 - 115 x B 15 - 75 x C 50 - 195mm, Output 15 - 70 boxes/min, year 2026, unused, new Immediately available

Width 82 cm Year of construction 2010 Pallet feeder PFH 82 Double Suction Wheel 1st station: 6 fold pockets 82 cm Automatic folding roller adjustment Combination seam pockets Double downstream knife shaft with lift function 2nd station: 4 fold pockets 66 cm Automatic folding roller adjustment Automatic folding pocket adjustment Downstream knife shaft with lift function 3rd station: 2 fold pockets 52 cm Automatic folding roller adjustment Automatic folding pocket adjustment Downstream knife shaft with lift function Palamides alpha 700 Stacking Delivery Delivery date: immediately

Heidelberg Stahlfolder KH66-6KTL +SKPD 66 + gluer - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Heidelberg Stahlfolder KH66-6KTL +SKPD 66 + gluer Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Heidelberg Stahlfolder KH66-6KTL +SKPD 66 + gluer Price: 14000 EUR Download PDF Heidelberg Stahlfolder KH66-6KTL +SKPD 66 + gluer Machine in perfect condition, ready to work. RFH-66 continuous feed BCUH-66 folding module Year of production 2005 6 cassettes 2 electronic knives side cassette with 1 knife SKP.D 66 press auxiliary roller for perforation First rollers divided for gluing Gluing machine ...

Horizon MKU-54 Mobile Knife - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Horizon MKU-54 Mobile Knife Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers Laminators Offset printing machinery Others Paper drills Perfect binders Pile turners Spare parts Stitching machines Horizon MKU-54 Mobile Knife Price: 6750 EUR Download PDF Horizon MKU-54 Mobile Knife Fully functional device, ready for production. Machine from the first owner. Very good condition. Horizon production, Japan Can be connected to any Horizon folding machine. Height adjustment, knife rotation by 180°, speed adjustment, reaction time, counter. Wiring included. Technical parameters: Max sheet size 540x330mm Min sheet size: 160x100mm Paper wei ...