136,420 used machines on RESALE, but how to find them? Machine Search
Max. size= 65 x 52 cm, Availability= 062025, 4 fold pockets automatic folding pocket adjustment Flexible knife folding unit Gremser flat pile feedersheet movement monitoring double sheet control Up to 30 folding jobs can be saved shingle delivery Format: max: 520x650mm min: 100 x 120 mm, smallest fold length 35 mm LOT Loaded in truck or container
Width 66 cm Year of construction 2000 Vertical Stack Delivery VSA 66 digital version Mobile substructure Delivery date: immediately Price on request. We supply and install worldwide.
max. format 76 x 120 cm Year of manufacture 2005 Pallet feeder with suction head MC Control 4 fold pockets in the parallel fold section Downstream knife shaft 2 folding swords in the crossfold section 1 more fold pocket after the 1st cross break Standing arch delivery Desta Price on request. We supply and install worldwide.
GUK Folding Machine Stand Alone FA 21/4 S2 SVA 730 Outdated Nominal voltage 380 V / Mp 50 Hz Nominal consumption 1.54 KW Rated current 4.6 A
Pharmaceutical Folder Stahl T 36/4 F.2 -Year 1994, High pile feeder -Max Sheet Size: 14.17" x 25.5" - 360x650 mms. - Min Sheet Size: 3.15" x 3.94" - 80x100 mms. - Min folding length: 3/4" - 20 mms. -Max speed : 160 m/min -Four buckles -Available in September -Air pump, manuals, all accessories, All rollers in nice conditions
M.Bäuerle CAS 52 overpass; cleaned and tested; suitable for folding machine CAS 52; Working width 520mm. M.Bäuerle CAS 52 bridge; cleaned and checked; used for folding machine CAS 52; working width 520mm.
Availability: as of now Current format: 170 x 92 x 25 mm Performance: 40 cycles Step offshoot: yes Gluing machine: on request Machine is in good and functional condition according to its age
Antike Falzmaschine - Antique Folding Machine Guk
Folding machine MB multipli-cas 524 Serial-No. 78261
Falzmaschine - Folding Machine Stahl T 36/4-F Baujahr / Year 1990 - Serial-No. 40562/90-163585 Flachstapelanleger / Flat Pile Feeder Falztyp / Folding Type 4 Taschen Format / Size: min. 80 x 100mm - max. 360 x 650mm Papiergrammatur / Paper weight: 40 – 250g/m² Stapelhöhe / Pile height max. 580mm Geschwindigkeit / Speed min. 10 m/min. - max. 160m/min. Durchmesser Falzwalzen / Diameter of folding rollers 32mm Auslage Schuppenauslage / Delivery Stream Delivery Kompressor / Compressor include - Manuals Included
Falzmaschine - Folding Machine Stahl K56/4-KTL Baujahr / Year approx 1980 - Serial-No. 16760 Flachstapelanleger / Flat Pile Feeder Falztyp: 4 Taschen - Schwert - Seitentasche - Schwert Folding Type: 4 buckles - 1 knife - 1 side buckle - 1 knife Format / Size: min. 140 x 180mm - max. 560 x 9000mm Papiergrammatur / Paper weight: 40 – 250(g/m²) Stapelhöhe Anleger / Pile height: max. 80cm Auslage Schuppenauslage / Delivery Stream Delivery Kompressor / Compressor include - Manuals Included
1 Farben Offsetdruckmaschine - 1 Color Sheet-Fed Offset Press Heidelberg GTO52+ Year 1992 - Serial-No. 706166 Size max. 320 x 460mm Impressions 37 Mio. Paperweight: 0.04 - 0.4 mms Speed: 3.000 - 8.000 sh/hr Dampening System VARN Compac Plus Version
Kombi-Falzmaschine / Combination Folding Machine Heidelberg Stahlfolder KH 66/6-KTL Baujahr / Year 2012 - Serial-No. FH.FNH0-00921 Flachstapelanleger / Flat Pile Feeder >>Automatische Falzwalzeneinstellung / automatic Folding rollers adjust<< Format min. 140 x 180mm - max. 660 x 1040mm Falztyp / Folding Type: 6 buckles - 1 knife - 1 side buckle - 1 knife Geschwindigkeit / Speed 50.000 Cycles/hour Auslage / Delivery SPH-70 - Year 2012 Compressor include - Manuals Included
Falzmaschine / Folding Machine Stahl KC 78/6-KL 16 Seiten Falzmaschine / 16 pages Cross Fold Year 1992 - Serial-No. 4642/92-19602 Arbeitsbreite max. 780mm / Working width max. 780mm Palettenanleger / Pallet Feeder 1. Station 6 Taschen / 1. Folding Unit 6 Buckles 2. Station 2 Schwerter / 2. Folding Unit 2 knives Schuppenauslage / Stream delivery Stahl SAK Inklusive Kompressor und Handbücher / Included Compressor and Manuals Soft PU Falzen, guter Zustand / Soft PU Rolelr, good condition Vorgelagerte und nachgelagerte Messerwellen / Front mounted and rear mounted slitter shafts
Falzmaschine - Folding Machine Heidelberg Stahlfolder KH 66/4-KL Baujahr / Year 2006 - Serial-No. FH.FNF-00513 Flachstapelanleger / Flat Pile Feeder >>Automatische Falztascheneinstellung / automatic Folding buckles adjust<< Format min. 140 x 180mm - max. 660 x 1040mm Falztyp / Folding Type: 6 buckles - 2 knives Geschwindigkeit / Speed 50.000 Cycles/hour Auslage / Delivery Stacker SBP Manuals Included
Falzmaschine / Folding Machine Stahl TF 78/6-4-4 16 Seiten Falzmaschine / 16 pages folding machine Baujahr / Year 1991 Rundstapelanleger / Round Pile Feeder Format min. 140 x 180mm - max. 780 x 1200mm Paper weight 40-250 g/m2 Falztyp / Folding Type: 6 buckles - 4 buckles - 4 buckles Auslage / Delivery SAL 66
Falzmaschine / Folding machine Stahl TD 66/6-4 Serial-No. 66748/95-225117 Year 1996
Koppelbox für Falzmaschinen - Coupling Box for Folding Machines Heidelberg Coupling box I. Year 2003 - Serial-No. 848-300
MG Tech Leanbox Case former Serial: HO2859 2018, Leanbox case former, 1250mm loading height, 600mm capacity cardboard, currently set for 385mm x 385mm form punch, up to 20 boxes per min, touch screen controls, max blanks 750mm x 750mm, 3Ph
Size: 440 x 310 mm Equipments: Feeder Feeder Mode: Flat pile feeder Max. pile height: 740 mm Folding Units 1st unit Type: AFC-566 FKT Pockets: 6 Pocket Type: Combi folding plates Pocket Configuration: manual Rollers Configuration: manual Roller condition: used condition Working width max: 558 mm Fold length max: 850 mm Cross fold unit with 1x knife Noise Protection Hood Touch Screen Control Delivery Delivery mode: PST-40 Type: Press delivery Year: 2010 Serial number: 360003 Working width max: 440 mm Technical Details Sheet size max: 440 x 310 mm Sheet size min: 60 x 64 mm Infeed height min: 280 mm Mechanical speed max: 240 m/min Pressing force: 20,000 N Built-in controller Technical details: Sheet size max: 558 x 850 mm Sheet size min: 128 x 148 mm Max. mechanical speed: 240 m/min Max. mechanical speed (cycles): 30,000 cycles/h
Folding machine FASTI type 2095-25-2,5Fabr. No. 94 295 004 Year of construction 1994Useful length 2540 mmmax. Sheet thickness 2.5 mmStroke of the upper beam 380 mmMotor power bending beam 2.2 kWWetz connection 400 Volt, 50 Hz- NC control FASTImatic FM100- one-piece pointed rail 135- controlled back gauge- continuous stop rail- controlled bending angle via control- electric foot switchesWeight 3000 kggood condition; used
Pallet feeder 4 buckles Batch counter Anti-noise hood MBO Z2 knife Palamides Alpha 500 delivery (year 2005)
Pile feeder – separating head 4 buckles Belt delivery Touchscreen panel Automatic setting
Material thickness range: 0.6mm-10mm, sheet width min./max.: 2x700mm/2x1000mm, sheet length min./max.: 500mm/700mm, max. production speed: 1000 boxes/h, registration accuracy: +/-1mm, machine dimensions X/Y: approx. 6200mm/2950mm, weight: approx. 1000kg. Includes a pressure belt. Documentation available. An on-site inspection is possible.
Long bending machine, with the following equipment: - 1 sharper rail 20°, offset, radius 1 mm for the upper beam - 1 insert rail 10/100 mm and 14/100 mm each for the bending beam - 2 foot switches for 2-man operation - S-Touch control with graphical profile display - 21.5" LCD touch color monitor with high-resolution graphics - Motorized depth stop 8-1000 mm - F-Geometry - within the EU with 32 amp plug with 5 m cable Machine has been repaired, checked, cleaned by a professional and is fully functional. Test run was carried out. Working length: 4040 mm Sheet thickness max. steel: 1.5 mm Sheet thickness max. aluminium: 2.0 mm Sheet thickness max. VA: 1.0 mm Back gauge (min.): 8 mm Back gauge (max.): 1000 mm Colour: blue/grey Total power requirement: 400 V Dimensions: 5325 x 2232 x 1924 mm Weight: 5000 kg Upper beam stroke (opening width): 140 mm Plate thickness ...
max. format 78 x 120 cm Year of construction 2012 Fully Automatic Paper Folding Machine Computer control with touch screen Navigator Control Pallet feeder with Vaculift and Vacubelt 4 fold pockets in the parallel fold section Automatic folding pocket adjustment Automatic folding roller adjustment Knife shaft cassette 2 folding swords in the crossfold section Automatic folding blade adjustment 1 more fold pocket after the 1st cross break Palamides alpha 500 Stacking Delivery Delivery date: immediately from stock Price on request. We supply and install worldwide.
on behalf of a customer GUK Folding Machine FA 21/4 Cartonac 2000-2 further information on request
Size: 820 mm Equipments: Rotary feeder RFH-82 1.station: 6 folding pockets 82 cm Automatic pocket setting 2.station: 4 folding pockets 66 cm automatic pocket setting 3.station: 2 folding pockets 56 cm Automatic pocket setting Stacking delivery SBP-46+ MKE+VE Touchscreen-Monitor, MCT-control-system
Width 78 cm Year of manufacture 2001 MC Control Round stack feeder Vacubelt 6 fold pockets in the parallel fold section Motorized fold pocket adjustment Downstream knife shaft Noise Insulation Hood Shed display Delivery date: immediately from stock Price on request. We supply and install worldwide.
Offer 25290 Specifications: - Max. working width 3040 mm - max. material thickness at 40 kg / mm² strength 2 mm - Bending angle adjustment selectable 6 - 135 ° - Largest opening width / stroke of the upper beam 250 mm - Height adjustability - bending beam 50 mm - the lower beam 50 mm - Upper bolster drive 400 V / 0.37 kW - Bending beam drive 400 V / 0.75 kW - Manual backgauge - Split goat's foot bending splint - Space requirement approx. W 4000 x H 1400 x D 1200 mm - Weight approx. 3500 kg
Key data: 4020 mm, 1 mm
with material thickness adjustment, hydraulics on the left side of the machine, without roller shears, bending beam with removable attachment rail approx. 8mm, 3 stop fingers, control on the swivel arm, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length: 4020 mm Sheet thickness max. steel: 1.5 mm Sheet thickness max. aluminium: 2.5 mm Sheet thickness max. VA: 0.8 mm Back gauge (max.): 1000 mm Projection: 1000 mm Colour: blue Total power requirement: 16 A Approx. space required: 6000 x 2000 x 1900 mm Weight approx.: 5000 kg Upper beam stroke (opening width): 200 mm without roller scissors Number of stands: 5 pieces Bending angle (max.): 145 degrees Machine Number: 0040-01
Width 66 cm Year of manufacture 2004 Pallet feeder PFH 66 Tremat Sheet Separation System Double Suction Wheel 4 fold pockets in the parallel fold section Automation Kit II Automatic folding pocket adjustment Automatic folding roller adjustment Downstream knife shaft 2 folding swords in the crossfold section 1 more fold pocket after the 1st cross break Shed display SAK without compressor New folding rollers and bearings in parallel fold Machine condition: cleaned and checked Price on request. We supply and install worldwide.
Width 56 cm Built in 1993 Round stack feeder Counting device PCS 100 1st station: 4 fold pockets 56 cm Downstream knife shaft 2nd station: 4 fold pockets 56 cm Downstream knife shaft Noise Insulation Hoods Shed Display SAK 56 without compressors / air supply Delivery date: immediately from stock Price on request. We supply and install worldwide.
SPECIFICATIONS: Installed power: 2.5 HP Machining on both sides at the same time RPM: 12,000 rpm
Width 76 cm Year of construction 2000 Flat pile feeder with Vaculift and Vacubelt Counting device MPC 6 fold pockets in the parallel fold section Downstream knife shaft 2 folding swords in the crossfold section Noise Insulation Hood Standing sheet delivery SAP 46 L Delivery date: immediately from stock Price on request. We supply and install worldwide.
Size: 500 mm Equipments: 2 parallel fold 1 cross fold Sheet width: max: 500mm,min: 105mm, Cross folding: max: 500mm, min: 182mm, Perforation: max: 500mm, min: 105mm, sheet length: max. 648mm, min.174mm. Speed max. 180 m/min., suction head w ith a rotary feeder
Size: 540 x 760 mm Equipments: 4-buckles cross folder Parallel fold Crossfold Technology: touch & work Memory folding types: 17 standard-typs of fold preprogrammed - Saveable jobs: 200 memories for repeat orders 1.folding unit: 4 buckles + knife 2.folding unit: 2 buckles Knife: full automatic Sheet size:max. 540x760mm; min. 120x172mm - Fold length:1. buckle: min. 58mm all other buckles: min. 35mm Paper weight: 40-250g/sqm Pile height: 650mm Speed: max. 40.000 cycles/h Power: 400V/50Hz - 2,5kW Dimensions: 2.700x1.050x1.650mm Weight: 1.050kg (without conveyor)
Specifications: - Machine for the production of longitudinal folds on the edges - square or rectangular longer channels and - Number of roller shafts with folding rollers 15 pcs - Material thicknesses from 0.5 - 0.63 mm - Duct dimensions from 80 x 80 mm - up to 100 x 100 mm - from duct dimensions 100 x 100 mm - Material thicknesses 0.5 to 1.0 mm - Throughput speed 15 m/min - Pneumatic connection - Drive 400 V / 3 kW -with: - E. - Footswitch - Duct baffles - Separate lubrication device - Space requirement approx. W 5400 x H 1200 x D 800 mm - Weight approx. 950 kg
Heidelberg Stahlfolder Ti 52/6/4 K with gluing year 2008 Feeder 1 unit 6 buckles 2 unit 4 buckles 1 knife Gluing Device good condition
sheet width: 2065 mm plate thickness: 1,20 mm daylight opening: mit WZ 35,0 mm daylight opening: ohne WZ 60,0 mm bending angle max.: 0 - 135 ° total power requirement: manuell weight of the machine ca.: 520 kg. dimensions of the machine ca.: 2400 x 1115 x 1150 mm - Segmented upper beam for a large number of bending options - Universally applicable bending machine for plumbing and repair shops - High upper beam for the production of high-edged profiles - Quick and easy bending process using a bow handle - Easy adjustment of the upper beam for efficient work - The bending angle is set using a scale - Individually removable segments for bending boxes - Robust construction in a modern design Furnishing : - segmented upper beam + bending beam - Foot clamp - Fixed stop for angle adjustment - back gauge - bending segments 38 | 38 | 38 | 50 | 50 | 50 | 50 | 76 | 76 | 101 | 127 | 152 | 203 | 25 ...
sheet width: 2020 mm plate thickness: 2,0 mm daylight opening: 124 mm bending angle max.: 0 - 135 ° work height max.: 930 mm total power requirement: von Hand kW weight of the machine ca.: 1.010 kg dimensions of the machine ca.: 2,75 x 0,56 x 1,26 m characteristics - Easy to use swivel bending machine - Flat guide for exact movement of the upper beam - Manually adjustable bending angle using a scale - Robust welded steel construction, designed for heavy use - Large opening width for processing tall workpieces - Optionally with back gauge for series work - Quick and easy bending process using a bow handle - Workpiece clamping by means of a large lever The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
sheet width: 2020 mm plate thickness: 2,0 mm daylight opening: 122 mit Segmente mm bending angle max.: 0 - 135 ° work height max.: 930 mm total power requirement: von Hand kW weight of the machine ca.: 1020 kg dimensions of the machine ca.: 2,75 x 0,56 x 1,26 m characteristics - Segmented upper beam for a large number of bending options - Universally applicable bending machine for plumbing and repair shops - High upper beam for producing high-edged profiles - Quick and easy bending process using a bow handle - Easy adjustment of the upper beam for efficient work - The bending angle is set using a scale - Individually removable segments for bending boxes - Large opening width for processing large workpieces - Robust construction in a modern design scope of delivery - Segmented upper cheek - Biegesegm. 25 | 30 | 35 | 40 | 50 | 75 | 100 | 150 | 200 | 300 | 500 | 510 mm The data for this ...
sheet width: 1020 mm plate thickness: 2,0 mm daylight opening: 48 mm bending angle max.: 0 - 135 ° work height max.: 900 mm total power requirement: von Hand kW weight of the machine ca.: 285 kg dimensions of the machine ca.: 1350 x 820 x 1140 mm Furnishing: - Segmented upper and bending beam for a wide variety of bending options - Clamping by means of a foot pedal - Hands remain free for optimal positioning of the sheet - Universally applicable bending machine for plumbing and repair shops - Robust construction in a modern design - Manual bending machine for standard bending tasks - Segmented upper beam for a large number of bending options - Optimal price-performance ratio - Quick and easy bending process using a bow handle - Non-slip rubber coating on the foot pedal for safe working - Easy adjustment of the lower beam to the respective sheet thickness - High upper beam for producing ...
sheet width: 2540 mm plate thickness: 4,5 mm ST thickness at Niro-steel: 3,0 mm VA bending angle max.: 0 - 135 ° daylight opening: 100 mm back stop - adjustable: 70 - 600 mm total power requirement: 5,5 kW weight of the machine ca.: 6275 kg dimensions of the machine ca.: 3900 x 1700 x 1900 mm Description . - Full hardened structure - BEIJER 7 ”touch screen control Software with 40 programs and up to 50 steps 7-inch touchscreen built into the side stand - with manual backgauge, adjustable from behind - Electronic components are quality components from SCHNEIDER - electrical cabinet is integrated in the side stand - Adjustment of the hydraulic pressure to the material thickness - Adjustment of the material thickness on the bending beam is easy with a mm scale - Handle for adjusting the material thickness on the upper beam is hidden in the side stand - Segmented upper cheek The dat ...
sheet width: 1050 mm plate thickness: 1.50 mm daylight opening: 100 mm bending angle max.: 135 ° height: OW 100 mm total power requirement: manuell weight of the machine ca.: 330 kg. dimensions of the machine ca.: 1600 x 900 x 1450 mm Equipment: - robust, manual swivel bending machine - divided upper tool - lower and rear tool Height of upper tool = 100 mm Division 100/100/100/100/100/100/100/70/60/50/40/30/100 left + right with horn tool - upper tool with quick-change system - quick foot clamp - angle stop - lockable - manual rear stop 500 mm - machine can be moved (rollers) - accessories box - rear Pictures show identical machine (UFA 1212) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
GUK FA 21/4 S2 SVA/730 stand-alone leaflet folding machine, 4 folding pockets, sheet format unfolded: min. 60 x 90 mm, max. 215 x 320 mm, smallest folding 15 mm, recommended paper weight 50-70 g/m², automatic drum suction feeder SVA/730, PCE barcode reader, double sheet control, output up to 460 folds/min., infinitely variable drive, electrical connection 400V/3Ph/50Hz, rated power consumption 1.76 kW, machine footprint approx. 1650 x 1075 mm (LxW), machine height approx. 1470 mm, machine net weight approx. 300 kg, machine in mobile version on wheels
Width 72 cm Year of construction 1992 Pallet feeder with suction head 4 fold pockets in the parallel fold section 2 folding swords in the crossfold section 1 more fold pocket after the 1st cross break Noise Insulation Hood Downstream knife shaft Shed display Delivery date: immediately from stock Price on request. We supply and install worldwide.
Key data: 8000 mm, 3 mm
Machine is in stabillier welded construction with 9 columns, 9 clamping cylinders and 36 coupling joints K38 mounted on a base frame The machine has the following equipment: CNC 8000 Control with Touch Screen TFT Color Display 17 Inch Attachment rail, brush table, upper beam with water seam groove Oil filling, fastening and levelling material, emergency stop rail via the Full length of the machine, integrated emergency stop operation in the foot pedal for upper and lower Bending beam, 2nd foot pedal for 2-man operation, upper bolster protection 2 short-part clamping fingers Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Working length: 8000 mm Sheet thickness max. steel: 3.0 mm Sheet thickness max. aluminium: 4.0 mm Sheet thickness max. VA: 2.0 mm Back gauge (max:.) 1150 mm Back gauge (min.): 150 mm Colo ...
maximum number of results exceeded
please refine your search
