fold used for sale

Flatpile Feeder, 4 Pockets, Delivery

2 units, 1 pack-Delivery.

STANDARD-EQUIPPED

STANDARD-EQUIPPED

Pallet Feeder with MBO Vaculift Feederhead, 1st Station: 4 Pockets, 2nd Station: 4 Pockets, 3rd Station: 2 Pockets, with MBO pressing Delivery SAP46, M-No. 85058495

Offer consists of: - Stapling and folding SPF-10II Horizon SPF-10II Stitching and folding unit: - Format setting: manual - Stitching heads: 2 to 4 stitching heads expandable - Stitching options: backstitch, block, corner stitching - Eyelet stitching: possible with eyelet stitching heads - Infeed format: 330x305mm; min. 148x148mm - Processing starch: min. 2 sheets; 4mm - Clamp spacing: min. 73 mm - Wireweight: 26 - 28 - Speed: max. 2,800 cycles/h - Electricity: 230V; 50Hz - 0.5kW - Dimensions: 2.130x610x850mm - Weight: 280Kg On request, we can organize the following points for you: Packaging, loading, transport (by ship or plane) including customs clearance Obtaining a leasing offer

Folding carton boarding machine Uhlmann C 100 LB • Format range folding carton B 30-100, H 15-75, L 70-200 mm • Capacity 10-80 folding cartons/min, clocked • For offset plug-in closure on both sides • Product feed for blister via blister stack shaft • Code reading Laetus Argus for 2x brochure code (front + back), 1x folding carton code, 1x brochure absence in folding carton • Brochure folding and inserting machine from the magazine GUK FA 21/4 Cartonac 91 • Colour embossing station for folding flap opposite the insertion side, 2-line, with embossing numbers • Poor ejection with ejection counter-control • Vacuum generators • SPS Eberle PLS 514 • Connection 400V/50Hz Optional: - New hardware/software Mitsubishi with 8" color Tuach Panel - Code reader Cognex - Validation documentation

Ras 3200 x 4 mm CNC Max worklength: 3200 mm Max tickness: 4 mm Distance between clampblock -- ram: 400 mm Max displacement back gauge: 1550 mm Eletric motor (power): 7,5 kW

Format range: max. 1350 mm, min. 45 mm Equipment: Longitudinal seam, folding bottom, double edge, 4 + 6 point gluing, HHS electronic finishing unit, 4 channel with 4 application heads, High pressure, disc gluing unit left, electronic Overhaul folding with servos, extended folding station, module 150, Primary crusher right and left, kicker, counter, vibrator on the jetty, digital position indicator, motorized threading station, motorized Transfer station, additional means transport in folding, vacuum on Overturning, camera surveillance, Jagenberg DBS 01 control, fully automatic format setting Jagset II, pneumatic, clocked Press strip. Overhaul 2023: cleaned, checked, painted and with new feeder and transport belt. Other: The machine can be viewed while running by appointment.

Format range: max. 1000 mm, min. 126 mm Equipment: Longitudinal seam, folding bottom, double edge, electronic top gluing unit HHS X-tend, 4 channel with 2 application heads, Disc gluing unit left, feeder with vibrator, folding floor module A2 Primary crusher right and left, kicker, counter, Bobst CUBE control, additional middle transport at the top/bottom in folding, cutting alignment on the press belt, pneumatic, intermittent press belt. Overhaul 2023: cleaned, tested, painted and fitted with new feeders and Transport belts, as well as equipped with new press belts. Other: The machine can be viewed while running by appointment.

DESCRIPTION: • Format range folding carton B 30-100, H 15-75, L 70-200 mm • Capacity 10-80 folding cartons/min, clocked • For offset plug-in closure on both sides • Centrally adjustable cup chain • Product feed for blister via blister stack shaft • Monitoring of packaged goods height in cup chain • Code reading Laetus Argus 4 for 2x brochure code (front + back), 1x folding carton code, 1x brochure presence in folding carton • Brochure folding and inserting machine from the magazine GUK FA 21/4 Cartonac 91 • Colour embossing station for folding flap opposite the insertion side, 2-line, with embossing numbers • Poor ejection with anti-ejection control • Vacuum generators • SPS Eberle PLS 514 • Connection 400V/50Hz

-Exhibition Machine- State-of-the-art fully hydraulic folding machine. Extensive standard equipment: · hydraulic drive for upper and bending beam · Pointed rail 45 degrees · Rails in upper, lower and bending beam · Oil filling · Control panel with: Digital display of bending angle infinitely variable specification of the bending angle Push button for controlling the upper and bending beam Switch for automatic operation · Control: PLC - Siemens · Foot switch for manual and automatic operation · CE certification · Safety stop at approx. 25 mm upper beam height Hydraulic dynamic crowning Motorized backgauge (1000 mm) Electr./hydr. adjustment of the bending wing, Touch screen: Input for backgauge values and Bending angle of the folding machine Pressure regulation of the upper beam Automatic tool clamping Round bending function with bending Half-shells 180 ...

Make LB. Model K820-4KZ Year 1994/1995 Size Min: 150 x 210 mm / Max: 820 x 1200 mm Feeder MBO F820 Flatpile feeder - with MBO Vaculift sheet seperation head and MBO Vacubelt suction belt Folding configuration 4 platebuckles + 2 knives with exit to left or right + MBO Z knife for 32 pages Delivery Lega 30/55 pressing upright delivery Details Vacuum pump, noise hoods, batch counter

RAFAMET KM 4 mechanical folding machine manufactured in Poland in 1990 is designed for producing bent sections from metal sheets with a maximum thickness of 4 mm, made by consecutive folding along the length of the workpiece strip. The highly reliable machine also allows for shaping sheet metal boxes, winding sheet metal edges and making wrapped and crimped connections after installation of special equipment. The folding machine is equipped with a control panel, back stop, workspace illumination and pedal for foot control. The machine has the same design and appearance as its twin folding machine OZAMECH KM 4. The total weight of the machine is 3750 kg. Technical parameters of the RAFAMET KM 4 folding machine - working width of the bending slats: 2000 mm - maximum workpiece length: 1500 mm - maximum workpiece thickness: 4 mm - smallest length of crimped sheet metal strip betwee ...

Sheet thickness: 5,00 mm Folding length: 2540 mm Depth rear gauge: 0 mm CNC Brand: Fasti CNC Model: Matik CNC MACH-id  3495 MAKE   FastiTYPE   215 - 25 - 05 YEAR   SPECIFICATIONS   Controll Fasti Matik CNC Pressbrake / Folding / Mech. / Hydr.  Folding Machine   Hydraulic / Mechanical   Hydraulic Bending length   2.540 mm Press force  5 mm    

Sheet thickness: 6,00 mm Folding length: 2040 mm Depth rear gauge: 600 mm MACH-id  3471 MAKE   Fasti Germany TYPE   212 - 20 / 6 YEAR  2002 SPECIFICATIONS Pressbrake / Folding / Mech. / Hydr   .Folding machine Bending length  2040 mm Press force   6 mm Ton Stroke  350 mm upper beam mm Backgauge stroke X in mm  0 - 600 mm Power  7.5 kW

Serial No. FH. DMA0-00272, The Twinstacker TSH Vertical Stack Delivery Is The Economical Solution To Broadly Cover The Medium To High Capacity Range. The Delivery Transports The Individually Pressed Sheets Through The Belt Section Without Marking. Subsequently, The Stacks Are Formed From The Top In Catch Baskets And Laid Out Alternately – In Two Stacking Levels Arranged One Above The Other. This Enables Effective Non-Stop Operation. The Simple Handling With Good Accessibility Also Facilitates The Processing Of Multiple-Ups. The Height-Adjustable Feed Table Ensures That The TSH Twinstacker Can Be Positioned Easily And Flexibly At The Various Preliminary Stations. Whether Laying Out Isolated Sheets Or Even In A Shingle Stream – The Twinstacker TSH Convinces In Every Respect With Its Performance. User-Friendly Stack Delivery, Mark-Free Laying Out Up To Two Uses, With User-Friendly Ergon ...

Format range: max. 1850 mm min. 420 mm Equipment: Longitudinal seam, folding bottom, double edge, 4-point gluing, electronic HHS top gluing unit with 4 application heads, disc bottom gluing unit on the left, Primary crusher left, motorized format adjustment, Kicker, counter, friction feeder with clocking, vacuum at the feeder, digital position indicator, motorized transfer station, middle station in folding, cutting alignment according to the feeder, Cutting alignment on the press belt. Overhaul 2023 with new feeder and transport belts, new Press belts top / bottom, cleaned, checked, painted Other: The machine can be viewed while running by appointment.

Folding machine H+H KL 112-45-T10; built in 2002; good condition; cleaned and tested; Inlet width 450mm; 10 folding pockets; Investor Gremser FN-K-TH; Area dial counter HHC-100; Transfer No.220.1-45 built in 2016; 2.Falzwerk KL112.1-mobil-45 Bj.2016; 6 folding pockets; Standing sheet display No.177-mobil 45 built in 2013; Display No.701-1500-52 built in 2016. Folding machine H+H KL 112-45-T10; good condition; cleaned and checked; working width 450mm; ten pockets; feeder Gremser FN-K-TH; count unit HHC-100; hang up conveyor No.220.1-45 year 2016; secound unit KL112.1-mobil 45 year 2016; six pockets; smal format delivery No.177-mobil45 year 2013; stream delivery No.701-1500-52 year 2016.

Pr. No.: 1224418281 // Sr. No.: FR. EAA0-00271

Sheet thickness: 4,5 mm Folding length: 2540 mm Depth rear gauge: 1500 mm CNC Brand: _Unknown / Other Make RAS Multibend Type 74 . 25 Year 1987 ras MULTIBEND 8000 schwenkbiege Sheet thickness (mm)T = 4.5 mm Folding length (mm)L = 2.540 mm Depth rear gauge (mm)Depth = 1.500 mm 2 sets off toolling Adj. upper beam = 400 mm Bend angle = 0 - 180 Gr  

Sheet thickness: 8,00 mm Folding length: 1250 mm Depth rear gauge: 1000 mm CNC Brand: _Unknown / Other CNC Model: POS 900 Make Schroder 8 mm Type MAK 4 / 1500 x 8.0 Year 1998 POS 900 - 1000 mm Sheet thickness (mm) T = 8.0 mm Folding length (mm) L = 1.520 Depth rear gauge (mm)X = 1.000Hydr. upper & lower beam Hydraulic top tool clamping 1 set tooling  

Very nice Heidelberg Stahlfolder TI 52 with 4 pockets. it is still in production, 180 m/min, built in 2001

800 x 600 460 mm

working width: 2520 mm for sheets up to: 2.5 mm Opening width upper cheek: approx. 250 mm Adjustability bending cheek: 30 mm Upper cheek drive: 1.5 kW Lower cheek drive: 2.3 kW electr. Connection: 380 V kW Weight: 2300 kg Space requirement: 3300 x 1400 x 1430 mm

4 Buckles FIRST UNIT 4 Buckles SECOND UNIT Flat pile feeder Digital counter Digital program Air compressor Belt delivery

Pallet feeder – separating head MCT2000 touch control monitor 1st folding unit - 4 motorized buckles and rollers BCUH KTLL unit with 3 motorized knives + side buckle (after the 1st knife) Noise hood Compressor SBP 46+VE delivery

Used Jorns hydraulic bending machine - year of production 2001 - full CNC numerical control - bends sheet metal with a maximum length of 6.1 m - sheet thickness: steel up to 1.25 mm stainless steel up to 0.8 mm aluminum up to 2 mm

- Thickness of 1.5-Al bent steel sheet. 2.5 mm, - Bending length 8m - Hydraulic drive - Roller shears for cutting off the sheet metal - CNC-700 Windows touch control - Bending max 140 ° - Bumper pulls away 1050 mm - Drive 3x400V, 4kw (16A) - Weight 7500 kg

JeppTech cartoning machine Manufacturer: JeppTech Oy ( Finland ) Type: PR 199 Year: 2006 Power: 400 v, 50 Hz, 16 A Air: 6 bar Speed: 28 pcs / min. Leaflet inserter feed

bending length; 2600mm Thickness of the bent sheet; black sheet max 2.5mm stainless steel sheet max 1.5mm

Format range: 450 mm, min. 55 mm Equipment: Longitudinal seam, disc glue on the left, Pre-breaker right and left, kicker, counter, vibrator on the jetty, digital position display, small nesting setup, clocked press belt. Overhaul 2022: cleaned, tested, painted and equipped with new feeder and transport belts.

Folding machine MBO T49/4, machine number 83067246, 4 pockets + delivery, flat stack feeder, counter, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

No. 5120: 1 gebr. Swivel bending machine Fabr. FASTI, type 212, Arb.-Ber.: 2500 x 3 mm,

- Pallet feeder PFH 82 - ACC Control - 1. Station BUH 82 with 6 buckles - 2. Station BUH 82 with 4 buckles - 3. Station BUH 56 with 4 buckles - VSA-86 delivery

year of issue: 2009 Bending stick length: 3100 mm press force: 100 to

Schechtl brand manual bending machine, in perfect condition, used only to produce copper, steel and stainless steel sheet metal converse, used very little over the years. With accessories for the production of bends visible in the photo

Format range: 1150 mm, min. 86 mm Equipment: Longitudinal seam, folding floor, double edge, electronic upper glue unit with 2 application heads, Disc upper glue unit, disc glue unit on the left, Pre-crusher right and left, kicker, counter, medium transport in folding, clocked press belt. Overhaul 2022: cleaned, tested, painted and equipped with new Feeder and transport belts equipped.

Force 170 T Bending length 3000 mm Distance between posts 2700 mm CNC AMNC Throat 420 mm Vertical stroke 350 mm Engine power 16.5 kW Length x width x height 4533.0 × 2650.0 × 3140.0 Weight 12750 kg

: neu : 2017 : 8063 : China : 1710 € : 1 : 1020 mm : 2.5 mm : 135 ° : 1348 mm : 850 mm : 1175 mm : 285 kg upper beam with sectioned rail booster cylinder user manual in GERMAN and ENGLISH The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Main drive = drive unit with motor and gearbox: SEW-Eurodrive K76 DT100LS-4TF/VS with motor fan A2E200-AA01-65

Model: Maxi Line 150 SM OP/9-6 Year of production: 1993 Bending length: 6000mm Machine in very good condition. In 2016, the bending machine underwent a general overhaul made in Germany.

Sheet metal bending machine 6 m x 2 mm Muller. Bends sheet metal with a thickness of 2 mm The bending machine has a numerically controlled CNC.

working width 2040 mm sheet thickness at 40 kp/mm² 4 mm Manual backgauge up to 600 mm Connected load 7.6 kW Machine weight approx. 3 t Dimensions L/W/H approx. 3.3 m / 1.4 m / 1.8 m Accessories: Bending tool with radii 3 mm, 6 mm, 7.5 mm, 10 mm

Universal folder former make RAS type 22.10Masch. -No: 353/4 built in 1982for sheet thickness up to: 1.5 mmProfiling speed: 6.0 and 12 m / min.Number of reel stations: 7Drive power: 2.2 / 3.4 kWWeight approx: 490 kgOutside dimensions approx : 2160 x 710 x 1010 mmWith- 2 set of profiling rolls- Footswitch- larger table with stopsused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Universal folder former make RAS type 22.15Mash. -No: 163/2Profile height max.:20 mmSheet thickness max .: 1.5 mmDrive power: 2.2 kWExternal dimensions: 1140 x 790 x 1210 mmWeight approx. 300 kgWith- Set of rollers for Eckfalz with Falzöffnerused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Equipment: Longitudinal seam, folding bottom, double edge, 4+6 point gluing, electronic gluing unit HHS X-tend² 8 channel with 6 application heads, Quality Assurance System HHS X-tend², BJ. 2014 with code reader, Bottom Glue Control, Nozzle Glue Control & Linear Ejectors, Belt crusher on the right, disc gluing unit on the left, electronic overhaul with servos, feeders with vacuum, Primary crusher left, kickers, counters, digital position indicators, Pressing device after folding, motorized threading station, Jagenberg DBS 01 Control, Video Surveillance Storage, pneumatic, clocked press belt. Overhaul 2024: cleaned, tested, new conveyor belts, new press belts at the top / bottom Other: The machine can be viewed while it is running by arrangement.

4 buckles

MAAD HSSM 1550/1.5 folding machine which was built in Poland in 2017, is designed for folding thin steel sheets with a maximum thickness of 1.5 mm along a straight line at a specific angle. This functional machine, based on an innovative design, guarantees comfortable operation and a wide range of applications, which makes it ideal for many different industries. The MAAD segment folding machine has a clamping bar and a bending bar equipped with interchangeable segment knives of different lengths. Mounted on inbus screws, the segments are made of the highest quality steel, which ensures long-lasting operation of the machine while maintaining excellent bending parameters. After pressing a button on the control panel, the HSSM 1500/1.5 electric segment bending machine operates in automatic mode. The bending bar moves to the set angle and then returns to its initial position. The total we ...

Multitex Folding Machine