We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,383 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Temperature controller, temperature control device, temperature control device, modular temperature control device, tool heater -Manufacturer: PSG, temperature control device for tool heating up to 8 control zones -Type: RSD II 8 -P max: 21kW -Transport dimensions: 490/400/H490 mm -Weight: 30 kg
used
Press brake, bending bench, bending machine, folding machine, die bending machine -Manufacturer: Cidan, manual folding machine -Type: unfortunately no longer readable -Max. Working width: 1050 mm -Max. Sheet thickness: mm -Upper tool: segmented, see photos -Clamping via: lever -Bending angle: adjustable via stop -Dimensions: 1400/620/H1190 mm -Weight: 407 kg
used
Press brake, bending bench, bending machine, folding machine, die bending machine -Handover: in current condition as seen -Note: the right side of the upper beam was repaired (welded) -Condition: fully functional -Manufacturer: Fasti, folding machine type 2095-25-2 -Max. Working width: 2540 mm -Max. Sheet thickness: 2 mm -Opening width: 290 mm -Connected load: 3.7 kW -Clamping: via threaded spindle -Bending angle: adjustable via potentiometer -Dimensions: 3615/1790/H1780 mm -Total weight: 2760 kg -Handover in current condition as seen
used
Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 12 pieces -Tool angle: 28° -Dimensions: see the drawing in the photos -Dimension: 23 x 245mm -Length: 4386 mm / each 1 x 748/730/715/700/400/198/180/150/100/65 mm, 2x 200 mm -Weight: 175 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 5 pieces -Tool angle: 28° -Dimensions: see the drawing in the photos -Dimension: 24 x 239 mm -Length: 2010 mm / each 1 x 1030/495/95 mm, 2x 195 mm -Weight: 80 kg
used
Bending tool, die, bottom knife, bottom tool, prism tool -Tool: for press brake, 5 pieces -Dimensions: see the drawing in the photos -Length: 1745 mm / each 1 x 615/570/335/120/105 mm -Width/Height: 80mm -Weight: 65.7 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 3 parts -Tool angle: 90° -Dimension: 39 x 250mm -Dimensions: see the drawing in the photos -Length: 1265 mm / each 1 x 500/400/365 mm -Weight: 65 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 8 pieces -Tool angle: 90° -Dimensions: see the drawing in the photos -Dimension: 39 x 254 mm -Length: 2085 mm / each 1 x 680/445/350/200/180/105/70/55 mm -Weight: 112 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Tool: split, for press brake -Tool angle: 90° -Dimensions: see the drawing in the photos -Dimension: 38 x 256 mm -Length: 148 mm / each 1 x 78/70 mm -Weight: 8 kg
used
Bending tool, die, upper knife, upper tool -Tool: for press brake, 4 pieces -Tool: 90° -Dimensions: 98 x 27 mm -Dimensions: see the drawing in the photos -Total length: 1977mm -Lengths: 2x 1015/ 1x 545 / 1x 417 mm -Transport dimension: 1015/200/H55 mm -Weight: 42.6 kg
used
Bending tool, die, upper knife, upper tool -Tool: for press brake, 11 pieces -Tool: 60° -Dimensions: 95 x 36 mm -Dimensions: see the drawing in the photos -Total length: 7780mm -Lengths: 8x 835 / 2x 600 / 1x 500 mm -Transport dimension: 835/400/324 mm -Weight: 182 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Manufacturer: UKB, 35° punch/upper tool UKB system Amada type 11.104 3-piece -Radius: R 1.5mm -Height: 86mm -Load capacity: 700 kN/m max. -Dimensions: see the drawing in the photos -Total length: 2505 mm / (3 x 835 mm) -Weight: 34kg
used
Bending tool, die, upper knife, upper tool -Tool: for press brake, 9 pieces -Dimensions: 95 x 31 mm -Total length: 5005mm -Dimensions: see the drawing in the photos -Lengths: 5 x 835 mm / 1 x 300/260/170/100 mm each -Transport dimension: 835/210/100 mm -Weight: 86 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Tool: for press brake, 2 parts -Upper tool: dimensions 835 x 60 x 130 mm each -Dimensions: see the drawing in the photos -Total weight: 47.5 kg
used
Bending tool, die, upper knife, upper tool, straight tool, die tool, seam closing tool -Tool: from press brake EHT type EHP 11-40 -Measures: see drawing in the photos -Dimension: 4050/45 / H130 mm -Weight: 147 kg
used
Base for folding tool, bending tool, die, lower knife, lower tool, prism tool, reversible prism, 1-part die block for die bending machine, die tool, hemming tool -Tool: for press brake, pad for press brake tool -Measures: see drawing in the photos -Dimensions: 2500/70 / H22 mm -Weight: 26.1 kg
used
Section steel shears, profile shears, punch, punching machine, hole punch -Pressure force: 29 to -Punching: -Scissors: -to cut: -not: -mechanical release: -div. Punches and dies: -Length stop: -Installation dimensions: 1300/1570/H1900 mm -Transport dimensions: 1300/770/H1900 mm -Weight: 1112 kg
used
Profile steel shears, profile shears, punch, punching machine, hole punch, hydraulic flat/profile and bar steel shears -Manufacturer: Mubea, hydraulic profile steel shears type HPSN 350 -Drive: hydraulic -Pressure force: 35 tons -Equipment: large support table with stops for punching -Punching -scissors -Cut -Notch -various punches and dies -Dimensions: 1460/1700/H1690 mm -Weight: 1080kg
used
Hand guillotine shears, guillotine shears, sheet metal shears, sheet metal shears, folding machine, edging bench -Hand guillotine shears combined with: folding machine -Cutting width: 610 mm -Max. Section thickness: 1.0 mm -Swivel bending machine -Max. Working width: 610 mm -Max. Sheet thickness: 1.0 mm -Transport dimensions: 845/910/H1230 mm -Weight: 240 kg
used
Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -hydraulic cylinder for: Harbs K2V recirculating machine -Piston diameter: approx. 40 mm -Piston rod: Ø 16 mm -Stroke: 132 mm -Recording piston rod: M12 x 1.5 mm -Dimensions: 80/80/H380 mm -Weight: 6.5 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool for: wire mesh, mesh wire -Wire division: 50 mm -Thickness: 25 mm -Drawing with the pictures -Total length: 550 mm -Total height: 194 mm -Weight: 20 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool for: closing folds -Thickness: 25/18 mm -Total length: 138 mm -Total height: 70 mm -Weight: 4 kg
used
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool for: closing folds -Thickness: 25 mm -Total length: 470 mm -Total height: 195 mm -Weight: 18 kg
used
large working width: 2520 mm for sheets up to: 1.5 mm Upper beam opening width: 180 mm Adjustability bending beam: 40 mm Bending angle adjustment: 135° Weight: 1970 kg Dimensions: 1970 x 750 x 1250 mm
used
Reference ID PP-36978 Category Folder Gluer Manufacturer Jagenberg Model Diana 105-2 Year Built 1991 Max. Size 1050 mm Condition Good Location Europe Availability Immediately Machine Description straight-line, lock-bottom and 4-corner folder gluer. HHS glue system with 3 guns.
used
Petratto SE78 gluing press brake - Type 2.5 Maximum format: 780 x 780 mm Minimum format: 60 x 60mm Nordson ProBlue4 Hot Glue System
used
Inv. Num. : 7070 Type: 6000/2 Producer: ZAKO Created: 2007 Parameters: Maximum bending length: 6000 mm Maximum sheet thickness when cutting: 2 mm Max. depth: 1000 mm Equipment: CNC control including touch panel Automatic Stops
used
Format Range: max. 480 mm min. 56 mm Equipment: Longitudinal seam, disc glue on the left with glue, Bobst CUBE control, vibrator, primary crusher right and left, Kicker, Counter, Minimal Folding Device, Pneumatic, Cycled Press tape. Overhaul 2023: cleaned, checked, painted, new feeder and transport belts. Other: The machine can be viewed while it is running by arrangement.
used
MBO K76/4 S-KTL - 32 pages year 93 Round Pile Feeder cassettes knives good condition
used
MBO T72/4/4/4 – 32 pages year 97 Round Pile Feeder cassettes good condition in production
used
Folding machine MB multipli-CAS 524 Machine Type: FN
used
buckles: 4 knives: 0 max. paper size: 49 x 66 cm serial no.: 25941/84 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Automatic Feed Aliening Unit Crash Lock Bottom 4 & 6 point glueing Straight Line Nordson Cold Glue System 2023 (Brand New) "ERO" cold gluer system (optional) 2023 (Brand New) KQ” gluer system (optional) Delivery Unit Can be seen in working condition It is very good condition Available immediately
new
DOUBLE LANES CARTON ERECTING MACHINE Can mount the same box on two strips at the same time German servo motor system German Siemens and Schneider electrical system PLC touch screen Glueing system with motor control Capability to work in different ways with plate Gathering system at delivery unit can be adjusted and connected according to job Voltage: 380V/50Hz Covering area: 4.0 1.4M The total power: 8Kw Maximum production speed: 400pcs/min Air pressure: 0.6Mpa (Dry and clean compressed air) Materials: Paper board 200-600gsm; corrugated board paper with thickness not exceed 1.5mm Blank length(L): 100mm – 450mm Blank length(B): 100mm – 450mm Height of side flaps(H): 15mm – 260mm Height of side flaps+lid(HI): 50mm – 260mm Conicity: 5°-40°
used
Full revised in 2023 100 cm 3 point glueing NORDSON” Cold Glueing System "ERO" Glueing System 2023 (optional) KQ” Glueing System 2023 (optional) With standart equipments Regularly maintained by Bobst It is completely overhauled in 2020 It is completely cleaned and painted It is in perfect condition Available immediately
used
Side Glueing (Optional 3 Point Glue) "ERO" Glueing System 2023 ( optional) KQ” Glueing System 2023 (optiona) Very Good Condition Immediately Available Note: If 3-point glueing is required, the apparatus must be added along with the spraying system.
used
German mechanical sheet metal bending machine The bending machine allows you to bend sheets with a width of 3000mm and a thickness of 6mm. It is controlled by a foot pedal and a touch panel, electronic settings of the bending angle, the ability to enter programs for the movement of the bumper and the bending angle, the ability to work in automatic cycles. Equipped with an electro-mechanical backgauge device with digital position value setting. Technical data: - Bending length: 3000 mm - Maximum thickness of the bent sheet: 6 mm - External dimensions of the folding machine (L x W x H): 4550 x 950 x 1850 mm - Machine weight: 8900 kg . Equipment : - Touch control panel. - Control pedal. - Electro-mechanical rear stop device with digital position value setting. - Additional new bending bars. - DTR manual.
used
Year of production 1993. Bought in 2007 as efficient and operational, it was never launched in Poland. Stored in a dry room and secured with a tavern. Salvagnini S4 + P4 cutting and bending center P4_0387 model 2220 with configuration: TC24155F.CT.CRPD + DU2515.SF + S4.25.DF.H2.SSA.CC.P2R36.BU31.BU32.BU33.BU34.BU35.EI05.EI09.EI13.UL1 + SC115C + IMS2715.RIU + TC27155D + ASPA2420.SFE + P4-2220.RC.GPS.SFE.LSA.LIA.PB.T.DL.CLA.U29 + SPR24.POS + AIP24 + HISRS + PSMVMS + H and S4_0385 about configuration: TC24155F.CT.CRPD + DU2515.SF + S4.25.DF.H2.SSA.CC.P2R36.BU31.BU32.BU33.BU34.BU35.EI05.EI09.EI13.UL1 + SC115C + IMS2715.RIU + TC27155D + ASPA2420.SFE + P4-2220.RC.GPS.SFE.LSA.LIA.PB.T.DL.CLA.U29 + SPR24.POS + AIP24 + HISRS + PSMVMS + H P4: 2200 mm bending length, bending depth 200 mm, bending angle 125 degrees. Bending thickness 1.5 mm.
used
2015 6 Buckles 2 Knives Palamides Alpha 700, 2015 In production Available: 02/2024 Located: Germany
new
2000 Folding machine width 76 cm 4 buckles 2 knives 1 side buckle 1 glue station stream delivery ASP66-2ME In production Available: 02/2024 Located: Germany
used
Continuous motion horizontal cartoning machine suitable for packing blisters in folding boxes. Machine incl. 90° blister feeder, booklet feeder from magazine, GUK-leaflet folder, type FA21/4 SVA/21, code reader LAETUS type Argus 6012, coding device, PLC SIEMENS type Simatic S7-300. Speed: Up to 260 cartons/min.
used
Tool trolleys, workshop trolleys, mobile workshop trolleys, transport trolleys, table trolleys, assembly trolleys -Workshop trolley: transport trolley, assembly trolley, foldable -Length: 1600mm -Width: 1100mm -Height: 1020mm -Swivel castors: 4 pieces with brakes -Weight: 103 kg
used
Reference Num.: 3684 Brand: MB B?uerle Type: Multimaster CAS 52/4 Construction year: 1996 Available: directly Status: In production Location: Deutschland Equipment: - 4 Falztaschen - Papierformat max. 52 x 72 cm
used
Size: 530 mm Equipments: 4 buckle plates sheet counter delivery
used
Size: Sheet size max: 960 x 1450 mm Equipments: Pockets: 4x second unit Control unit: MBO Navigator-Control Feeder Mode: Flat pile feeder Sheet size min: 170 x 200 mm Noise Protection Hood Pockets: 4x in first unit without delivery Sheet size max: 960 x 1450 mm Max. mechanical speed: 200 we sell the machine as a spare part donation
used
Size: 960 x 1450 mm Equipments: Max. mechanical speed: 230 Noise Protection Hood Control unit: MBO Navigator-Control the machine has water damage possible inspection Sheet size min: 170 x 200 mm without delivery The machine has water damage as it is possible to inspect we sell the machine as a spare part donation Pockets: 4x Feeder Mode: Pallets pile feeder Sheet size max: 960 x 1450 mm
used
Flat Pile Feeder, 1st Plant 4 Bags, 2nd Unit CAS 38/2# 96952157 (2 Bags), Shed Delivery, Compressor
used
Swivel bending machine RAS 67.30 HR Steel Plant Construction Location of the machine: 76661 Philippsburg The machine can be viewed on site. It works perfectly. You can arrange a viewing appointment at any time. We'd love to hear from you.
used
Working lenght 2040 mm Max material thickness 5 mm
used
-Year 2000 -Max paper size 66x106 cms. -Anti noise hoods -Six electronic motorized buckles + 2 electronic knives -High pile feeder, Vaculift, Vacubelt, DV Pump -MBO MPC Control , Panel with all remote controls of the sizes and knives -Z 6 MBO mobile knife -HHS C 1100 glue system with 12 sections to connect -One spray glue gun, perforators and tools -Petratto DP 46 press station and stacker -All rollers in perfect conditions -Lot of parts and accessories