foil used for sale

Heißfolienprägemaschine / Hot Foil Stamping GEBA 1/F-2

Dreimesserautomat / Three Knife Trimmer Wohlenberg FA 38 Baujahr / Year 1989 Format / Size max. 315 x 410mm Thicknes max. 100 mm Speed max. 3000 cycles per hour Automatischer Einlauf / Specification automatic feeding Bandauslage / Belt delivery

Prägepresse / Hot Foil Stamping Press

Converting Line GM 330 FB-D (Hot stamp + Screen print) Year of manufacture: 2018 Manufacturer: Grafisk Maskinfabrik Max. web width: 350 mm Min. web width: 50 mm Unwind diameter: max. 700 mm Rewind diameter: max. 600 mm - Vetaphone Corona - BST web edge control Hot foil stamping unit (flatbed) Speed: 6,000 stamps/h or 10-15 m/min Web width: 110 mm - 330 mm Dual foil unwind and rewind with a diameter of 250 mm Substrates: 50-500 μm Board thickness: 5-10 mm; 7 mm is standard Plate pressure: 30 tons Foil feed in transverse and longitudinal directions (rotating tower) Temperature range 80°-130° C Heat-up time approx. 20 min. Screen printing unit Speed 4000 print runs/h or 5-15 m/min. Web width 110 mm - 330 mm Frame size 660 mm x 500 mm Frame type 30 mm x 30 mm aluminum frame Printing area 330 mm (length) x 330 mm (width), Manufacturer: Grafisk Maskinfabrik, Substrates: 50-500 um

Auto. Film wrapping system Auto. Film wrapping system Pallets – Turntable Pallet Turntable Drive-on ramp Access Ramp Pallet weight max 2 t Weight of pallets max.

GENERAL DESCRIPTION: The Macchi 3-Layers E18 is a high-capacity blown film co-extrusion line intended for production of general-purpose films with high width and output demands. It processes LLDPE, LDPE, mLLDPE, MDPE, HDPE, and in upgrade configuration also PP. The system uses a 700 mm 3-layer die head and reaches an output capacity of up to 900 kg/hour, depending on formulation. EXTRUSION GROUP: • Extruders: 80 mm + 100 mm + 80 mm • Infrared heating • Hydraulic screen changers Detailed upgrade specification: • One extruder Plastex 100/30D (middle layer B) • Two extruders Plastex 80/30D (layers A and C) • Bimetallic barrels • Nitrided screws • Water-cooled grooved feeding sections • 5 heating zones with IR heaters and blowers •Engine: - 150 kW DC motor (100 mm extruder) - 100 kW DC motors (80 mm extruders) • AC motor application with digital control  ...

The Haloila Octopus Junior stretch wrapping machine is a suitable solution for safe and efficient pallet wrapping. Thanks to its compact design, low energy consumption and automatic winding function, it can be easily integrated into production processes. This model from 2012 was used in the beverage industry and was regularly maintained. The current condition and technical details can be assessed during a visit.

M. No.: 46131 Equipment / Additional information: Stamping surface with heating head: HKAC max. 100 x 125 mm // HKBC max. 140 x 230 mm Stamping pressure at 6,5 bar with: 1 Zylinder ca 400 daN (kp) // 2 Zylinder ca 800 daN (kp) Readjustable stroke, dep. on pressure producer: 0-40 mm / 0-100 mm Max. passage height without/with sliding table: 300 mm / 275 mm Readjustable foil advance: 0-230 mm Max. foil width: 140 mm Heating voltage: 220 V / 50 Hz Heating capacity with heating head: HKAC 540 W // HKBC 900 W Temperature measurement by means of: Fe-Ko Max. output, hourly cycles: ca 4000

The machine is ideal for short lengths (30, 50 or 100m) either in full width, or you can also divide into different widths, from a maximum of 1600 mm. Thanks to the 4 take-up shafts, the machinist is able to unload and position a new sleeve while the machine is still winding. This brings an enormous amount of extra power at the end of the day, as there are only short downtimes. The machine is still in daily use and sample materials can be tested daily. We would then disassemble the machine, pack it and put it on a stable pallet. 20ft containers can be loaded via the ramp.

Key data: 65 mm

Qty. 1 Second-hand 3-Layer Co-Extruder Line Brand & Model: MACCHI 3-layer co-extruder Built: 2012 Materials to be processed: LLDPE/LDPE/LLD/HDPE Extruders: 65 mm + 80 mm + 65 mm Infrared heaters 3 pcs plate filters Head: 3 Layer blown film Die head TE5303-IBC-350/500 Dies diameter 350 and 400 mm IBC Die Gap: 1.8 mm Output: Up to 800 kg/hour depending on material formulation Air ring: Dual flow air ring carbon fibre Take off: Take off 2400 mm wide Oscillating nips Motorised side gusseting Rewind: Double winder, fully automatic back-to-back rewinder Winder, fully automatic roll change Reels diameter up to 800 mm Winding width 2350 mm Accessories: Tower Web guide E&L Components blander Shini Gravimetric weight control system Piovan/Doteco Dosing units Doteco Automatic Thickness control Kundig/K-Design Profile gauge control system Calibrating basket Corona-treat ...

Ready-to-use, well-maintained film wrapping machine SOLLAS type 17, with tool for cartons height 65 mm x width 75 mm x length 137 mm. Max. size cartons height 85 mm x width 200 mm x length 300 mm. cycles 40/min, storage belt L 1600 mm, built in 1989, for processing sealable polypropylene film. No tear tape possible. The machine was in production until March 2024. More information on request. Auch + Technik e. Kfm. D-73728 Esslingen Phone +49 1577 5329827

Working width - 1700 mm, material in rolls, Raw material - paper (50-300 g/m²), foil (0.023-0.10 mm) Substances - solvent-based adhesive, water-based adhesive Coating type - Mayer rod, anilox roller, slotted roller Dryer - 18 m long, 7 drying sections, temperature 30°C-170°C, gas drying (blower) Roll diameter - max 1400 mm

Table Welder / Film Sealer RAYPACK C-320, Year 2013, S/N 12445

Working width – 650 mm Material in rolls Raw material – 950-350 g/m² paper, foil Substances – solvent-based adhesive, water-based adhesive Coating type – Mayer rod, slotted roller Working speed – 0-80 m/min Dryer – 8 m, 3 sections, temperature 3°C-120°C, electric drying Dimensions – 14 m x 1.8 m x 1.8 m Roll diameter – max 1000 mm

Several spare parts for Corazza FD220L machines existing out of:, - Cams., - Holders., - Guiding plates., - Bushes., - Axles., - Toothwheels., Type of Machine: Yeast / Butter Packaging Machine, Dimensions: Box 80 x 60 x 60 cm, Weight: 140 kg

Foil wrapping machine (forming-feeding-packing) which can be used for packing products like yeast, butter, lard, margarine, tvorog or cottage cheese into paper-based aluminium foil or pergamyn. Sequence of the machine: foil feed from a reel of foil, imprint position (option, date coder excluded), foil cutting, wrap formation and insertion in the turnplate cavity, product feed by butter / solid yeast (not melted) or any other product, wrap folding, portion pressing and heatsealing, lifting out and ejecting the portions, transferring the portions on the exit conveyor belt, outfeed conveyor belt. The format on the machine is 50 gram, 46 x 32 x 35 mm, bottom folding. The product is feed from a stainless steel hopper with pushing down screw inside (motor 1,5 kW - n2: ± 25 rpm). The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil ...

with original HDM hot foil stamping device

with original HDM hot foil stamping device

L-sealer SMI Pack Year: 2016 Model: FP870A Size: 870x620 mm Electric opening/ closing of the seal frame Up to 3.600 cycles per hour with delivery

Fully reconditioned foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. This machine is general overhauled and in a as good as new condition with new controls with frequency converter (renewed in 2026). The format on the machine is 250 gram, 100 x 75 x ±35 mm, bottom folding. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. If there is no foil in the cell, the machine will stop. The speed can be adjusted by a frequency converter between 40 - 90 packages per minute (depending on filling weight, product, product viscosity and quality packaging). Outfeed conveyor. On request we can do a dry test (without product) with your own foil o ...

Format : 73 x 104 cm (29”x 41”) Spiess feeder with pre-marge Front and side detection cells PC Control panel 3 x advances 2 x honeycombs straightened 2 x new honeycomb frames 2 x new heating units Air-conditioned electronic cabinet

max roll 800 mm max speed 80 m/min film unwinding width 1600 mm pneumatic shaft hydraulic brake possibility of centering the film Auction-ID: A7-45261-2

Compressed air connection 6 bar Auction-ID: A7-45263-30

Compressed air connection 6 bar Auction-ID: A7-45263-29

weight: 25 kg Motor speed: 2850 Rpm Engine power: 1.5 kW Auction-ID: A7-45261-10

Consisting of: 3x Siemens” winders with Boschert” safety chucks, Montalvo” tension controller type SimPlex, 1- air knife, Brush-roller and enclosure, Gardner Denver” ventilator type SAP 300, Siemens” simatec panel, 1x 2-door switching cabinet, with platform and stair, floor space aproxemately 6000x3300mm. Auction-ID: A1-43459-55

Various manufacturers, designs and sizes, in stock on 4 pallets Auction-ID: A1-45495-435

Type Connie 1400, consisting of, 1x IJssel technology” cutting knife, linear vacuum transport system equipped with 8 vacuüm suction cups travelling length 10.000mm, 1x Sander” winder AWB-1-1400-1200-12 with Siemens” touchpanel, 4x IJssel technology” mobile table dimensions 10.000x1500x930mm (can be divided in 2), safety fence, 1x 1-door switch cabinet IJssel technology” with Siemens” touchpanel, 1x 2-door switch cabinet, used floor space approximately 16.600x5000mm, total weight approximately 5000kg Auction-ID: A1-43459-15

1 pallet, 8 rolls, length per roll 3470 metres, width 1320 millimetres, weight per roll approximately 150 kilograms. Auction-ID: A1-43459-144

Consisting of: 4-zones with 8 connected process modules : feeding, brush, blow-off, ultrasonic cleaning, blow-off/tensioning/blow-off, 4-step cascade rinsing, blow-off and drying module, 4x Becker” vacuüm pump type SV5.1050/1-01 enclosed in soundproof stainless steel cabinet (2009), 2x winder / unwinder unit equipped with Boschert” safety-chucks and enclosure, one side has built-in cooling fans, with 2-door electrical switch cabinet, stainless steel walking platforms with plastic grid floor and stair, 3-door electrical switch cabinet, used floor space approximately 18.500x6000 Auction-ID: A1-43459-19

- Variable feed speed. - It consists of 6 heads, tiltable, adjustable in height and depth. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-702

Consisting of: 8 connected process modules : feeding, pre-rinse, blow-off, caustic bath, blow-off, flush bath with 4-step cascade rinser, acid, flush with 4-step cascade rinser, isolation and drying module, 2x Kampf” winder / unwinder unit with Boschert” safety chucks, 2-door electrical switch cabinet, 4x Becker” vacuüm pump type SV5.1050/1-01 enclosed in soundproof stainless steel cabinet (2008), powder dosing / mixing unit, 6-door electrical switch cabinet, stainless steel walking platforms with plastic grid floor and stair, used floor space approximately 17.500x6000mm Auction-ID: A1-43459-18

- Variable feed speed. - It consists of 7 heads, tiltable, adjustable in height and depth. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-44536-731

Automatic foil wrapping machine which can be used for packing products like margarine or butter into aluminium foil. The machine is in a good as condition with main control panel with Siemens S7-200 PLC and frequency converter and operation panel with Siemens TD200 Operator Interface. Previously used in a margarine factory. The machine is equiped with a rotating forming drum with 4x rectangular molding chambers. The format on the machine is 250 gram, 98 x 65 x ± 41 mm. SIG folding principle (folding flap on the side, for less foil usage). The margarine is feed with a direct connection with compensator and return line. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. The speed can be adjusted by a frequency converter between 30 - 120 packages per minute (depending on product, packaging material and surrounding conditions ...

IMA P10K Automatic Butter Roll – Round – Log – portion wrapping machine in aluminium foil / parchment paper., The machine is included with the following pack format sets:, - Logs (or) Rolls (or) Round (or) Cylinder – ± 43 mm x 110 mm = 125 gram (complete), - Logs (or) Rolls (or) Round (or) Cylinder – ± 48 mm x 160 mm = 250 gram (complete including extra mouldset of ± 45 mm to reach ± 230 gram)., - Rectangular Blocks (or) Portions – 100 mm x 75 mm x 35 mm = 250 gram (filling nozzle and 1x guide for the bricks when they are upside down are missing)., - Rectangular Blocks (or) Portions – 160 mm x 105 mm x 65 mm = 1.000 gram (Guiding plate upside down, side guides and support level missing)., Product is fed through the hopper which includes a butter screw feeder., Maximum Speed: up to 60 packs per minute (Varies depending on the portion size), Products that can be packed: B ...

new foil wrapping machine brand: ERREGI type: Compact 250 line consisting of 2 parts: wrapping machine and shrinking tunnel, with infeed and outfeed elements With automatic selection of 3 or more foil widths. wrapping machine: length of welding bar: 2.500 mm number of reel pairs top: 3 max. width of top reels: 2.450 mm number of reel pairs bottom: 3 max. with of bottom reels: 1.450 mm width of conveyor belts: 1.300 mm length of exit belt: 2.400 mm length of infeed belt: 3.500 to 2.200 mm (telescopic) working height (conveyor): 800 mm opening height (max. workpiece height): 700 mm min. workpiece weight: 5 kg shrinking tunnel: installed power: 54 kW average hourly consumption: 35 kWh length of shrinking area: 2.700 mm total length of tunnel: 3.700 mm width of conveyor: 1.500 mm working height (conveyor): 800 mm opening height (max. wor ...