fo used for sale

Incl. ISCAR turning tools partially equipped, weight 30kg Auction-ID: A7-51245-46

By Atorn, Walter, Emuge, Gühring, HSS/E, all packaging filled, weight 4kg Auction-ID: A7-51245-100

Type MB7023 Maximum working width 230 mm Minimum working width 20 mm Maximum working thickness 180 mm Minimum working thickness 8 mm Shaft diameter 40 mm Feed speed 5–30 m/min. Spindle speed 6000 rpm. 7 spindles B-4kw, R-5,5kw, L-5.5kw, T -7.5kw, T-5.5kw R-5,5kw, B-5,5kw Side motors of grinding brushes 2.2/2.2 kW Top motor of grinding brushes 2.2 kW Total power 52.2 kW Air pressure 0.2–0.3 mpa Width of side sanding brushes 200mm Width of top sanding brushes 300mm Transport dimensions 3750x1600x1500mm Weight 4200 kg Price 36880 Eur (EXW Jonava, Lithania)

Description Item # 9406 - QUADRO SEAL BAGGING MACHINE (vertical form fill seal) Manufactured by PENTAVAC Machine Type – Bagging Machine Model X-Motion 4S Year 2017 400Volts, 50Hz, 13Kw, 3Phase Set up for Quadro seal, stand up packs Photocell for printed films Was running at about 40 packs per minute Can run at up to 180 bags per minute (depending on product and materials) Bag sizes 60 up to 250mm long x 32 up to 250mm wide Including MARKEM SmartDate 3 Coder - Year 2008 with Outfeed Product Conveyor

Valleylab Force 2 Electric Scalpel Manufacturer: Valleylab Model: Force 2 Monopolar / Bipolar Cutting & Coagulation REM Neutral Electrode Monitoring System Configuration/Included Accessories: Dual Pedal, Bipolar Pedal, Cart, Handpiece, Neutral Electrode & Cable Status: Good working condition, fully tested Auction-ID: A1-51275-114

Karl Storz Dual Two-Level Foot Control 20012630 Manufacturer: Karl Storz Model: 20012630 Reference: 20012630 Condition: Very good condition, fully functional Auction-ID: A1-51275-130

Medic Micro 205.00.010 – Foot Control for Surgical Motor Manufacturer: Medic Micro Model: 205.00.010 Condition: Good, Functional Tested Auction-ID: A1-51275-70

BK Medical Flex Focus 1202 Ultrasound System Ultrasound Scanner for Urology, Surgery, Vascular, Gynecology and General Imaging. Manufacturer: BK Medical Model: Flex Focus 1202 Items Not Included / Missing: No Display Condition: Incomplete – Untested, Sold As Is Auction-ID: A1-51275-140

Valleylab Force 2 Electric Scalpel with Trolley Manufacturer: Valleylab Model: Force 2 Included: Force 2 Generator, Mobile Trolley, 2 Foot Pedals, Power Cable Modes: Monopolar and Bipolar Electrosurgery Condition: Medium Aesthetic Condition – Lights Up, Not Tested, Sold As Is Auction-ID: A1-51275-182

Olympus MAJ-1243 – SonoSurg Generator Footswitch Manufacturer: Olympus Model: MAJ-1243 Compatibility: Olympus SonoSurg Generator Condition: Good, Functional Tested Auction-ID: A1-51275-34

Swingtec Fontan Portastar S ULV Cold Fogger Disinfection and pest control, indoors or outdoors. Manufacturer: Swingtec Model: Fontan Portastar 2-stroke petrol engine 37 cc, 1.5 kW Fuel tank 1 L, spray tank 3 L Flow rate 1–6 L/h, droplets < 30 μm Back carrying Weight: 12.5 kg (empty) Condition: Like new, used only a few times Auction-ID: A1-51275-128

Aesculap GA415 – Trolley / stand with pedal GA188 Manufacturer: Aesculap Model: GA415 Configuration: Trolley / stand with foot pedal GA 188 Features: Stainless steel, adjustable tray, 4 castors, cable management, max. load 10 kg Power supply: 100–240 V – 50/60 Hz Condition: Very good, functional Auction-ID: A1-51275-169

With integrated storage bin on wheels. Stainless steel structure, control panel on the front and metal frame on adjustable feet. Second-hand equipment, sold with its mobile bin Auction-ID: A1-51273-6

Four-way chain 8 tonnes and 14 tonnes with shortening hooks Auction-ID: A1-50864-134

Covidien Valleylab FT900 – Valleylab Force Triad Electrosurgical Unit Cart Manufacturer: Covidien (Tyco Healthcare Group LP for Valleylab) Model: Valleylab FT900 Part Number: FT900 Lot No.: 102807-01 Condition: Used (see photos) Auction-ID: A1-51275-53

Reconditioned machine fitted with Elgo CNC control for bending angle Also equipped with 2 digital readouts for positioning of lower table Emergency cord at the front Foot pedal for semi-automatic use Bending radius (R) = 1.5 E - 10 mm on 3 meter length - 12 mm on 2 meter length - 15 mm on 1 meter length Bending radius (R) = 2 E - 12 mm on 3 meter length - 15 mm on 2 meter length Pre-bending - 15 mm on 3 meter length - 20 mm on 2 meter length Type: hydraulic Max worklength: 3050 mm Max tickness: 12 mm Distance between clampblock -- ram: 700 x 500 mm Eletric motor (power): 25 HP Length: 4300 mm Depth: 2300 mm Hight : 2300 mm Weight: 15 ton

The planing grinding moulding machine is a machine designed for professional use and will be used in the Foam industry for levelling, grinding and/or sawing of grooves in plates. The sawing unit behind the Wide band grinding unit is used for sawing grooves in the sanded plates. Broadband looping is defined as follows: • Planing: The surface of a workpiece is measured with the help of planer blades made flat, especially if more than 1 mm must be removed from the material; • Calibration: to the same thickness, so that a regular Workpiece surface is created; • Grooves: A rotating axis with saw blades for incorporating Grooves in the plates after they have been sanded. The machine can be inspected or put into operation under "power".

IWK SC 4 HS High Speed Horizontal Cartoner Cartoning Machine used The machine essentially consists of the following components: • Control cabinet with electrical control • Operation via screen, remote control via touch button • Product feed as pouch feeder • Product feed through XTS product chain (Beckhoff) • Folding carton feeder (folding carton belt with folding box cycloids for folding carton erection) • Product insertion • Folding carton transport by means of folding carton chain • Folding carton closure (sizing from the front, plug-in closure at the back from bottom to top) • Folding carton discharge for good packs and ejection for bad packs • Marking system Laser make Domino • Gluing device make Robatech including granulate container • Vacuum pump make Busch type Mink • Current format in mm 56 x 24 x 90, at 340 cycles / minute

Number of spindles: 4 St. Working width: 230 mm Working height: 150 - 200 mm Length of the planing table: 2000 mm Feed motor: 4 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Object: COMPLETE FOUNDRY TOOLING FOR CAST-IRON BOILERS – ROKOR & ROGAS Two production-ready tooling sets for sale – €40,000 each, negotiable 2 sets of foundry tooling and core boxes, manufactured in 2019 and 2020, are available for the production of cast-iron heat exchangers for high-efficiency heating boilers. • ROKOR: Tooling for oil-fired boilers • ROGAS: Tooling for gas-fired boilers Key features • Almost-new condition, designed for industrial production • Proven Saint-Roch boiler technology • Robust grey cast-iron heat exchanger design • Boiler ranges covering 15–58 kW, with technical documentation specifying models up to 80 kW • Comprehensive technical documentation available, including drawings, specifications, BOMs, manuals and performance test results A turnkey industrial opportunity: Enables a foundry or heating equipment manufactur ...

Manufacturer: VITAL Model No.: FPx3200 Year: 2005 Condition: Used Stock number: 9626 Maximum sawing speed: 4500 1/min Wheel diameter: 315 mm

Nominal power: 38 kW Net weight: 4620 kg Nominal load capacity: 3000 kg Front Tyre Size: 28X9-15/7.00 SE Back Tilt: 5 degrees Load capacity & load center of gravity: Up to 3000 kg at 500 mm load centre and 3105 mm load height (with 1070 mm fork carriage + 1200 mm forks)Up to 2800 kg at 600 mm load centre and 3105 mm load height Auction-ID: A1-51285-411

Recently received maintenance and knives have been sharpened. Ready to use without papers. Auction-ID: A3-46111-17006

Builder radio system + signalling system Pütting, Vehicle does not have ZUB I + ZUB II, vehicle is in a non-running condition, 2 keys available, engine DURATORO DI, trunk and side door hi. Left cannot be opened Auction-ID: A1-51285-342

4x Primagaz forklift gas cylinder; 2x Biral multistage centrifugal pump HPC-E 10-40-2 Auction-ID: A1-50707-335

Nominal power: 38 kW Net weight: 4620 kg Nominal load capacity: 3000 kg Front Tyre Size: 28X9-15/7.00 SE Back Tilt: 5 degrees Load capacity & load center of gravity: Up to 3000 kg at 500 mm load centre and 3105 mm load height (with 1070 mm fork carriage + 1200 mm forks)Up to 2800 kg at 600 mm load centre and 3105 mm load height Auction-ID: A1-51285-413

Antique Fordson Super Major tractor sold for repair. The engine currently mounted in the tractor has a damaged connecting rod and requires repair. A second complete engine is supplied with the tractor. This is intended to serve as a parts bank and will allow the buyer to retrieve the necessary elements in order to repair the engine currently mounted on the tractor. The seller does not have the tractor's papers Sold without battery Features: Brand: Fordson Model: Super Major Diesel engine Manual gearbox Rear linkage Rear PTO 3-point hitch Complete tractor Second motor supplied with sale Additional engine for tractor engine parts/repair Status: Damaged engine connecting rod Tractor currently non-functional Engine repair to be planned Bodywork in its original condition with patina and corrosion related to age Overall condition visible in photos Nice restoratio ...

Clamp, 1925mm maximum width, 750mm minimum width, 1600mm forks. 4 hydraulic functions Auction-ID: A1-41952-3

Brand Name: CESAB Equipment Type: Boom Crane Center of gravity: 500 mm Equipment mass: 106 kg Indicated lifting height: 5,000 mm Residual load capacity with centre of gravity H = 3,000 mm: 1,100 to 350 kg depending on boom position Residual load capacity with centre of gravity Hmax = 5,000 mm: 890 to 300 kg depending on boom position Arm adjustable to 8 positions Lifting hook Auction-ID: A7-51362-65

hydraulic connections; fork length 980 mm; Auction-ID: A1-50707-256

Program selection (overview) K1: PTI Standard K2: Wood pulp with fresh water K3: Pulp, APTMP, etc with fresh or circulating water K4: Wood pulp with circulating water K5 to 25: freely programmable Auction-ID: A1-51285-312

Nominal power: 38 kW Net weight: 4620 kg Nominal load capacity: 3000 kg Front Tyre Size: 28X9-15/7.00 SE Back Tilt: 5 degrees Load capacity & load center of gravity: Up to 3000 kg at 500 mm load centre and 3105 mm load height (with 1070 mm fork carriage + 1200 mm forks)Up to 2800 kg at 600 mm load centre and 3105 mm load height Auction-ID: A1-51285-412

fork length 100 mm; side shift; hydraulic connections; maximum width over the forks 980 mm; Auction-ID: A1-50707-254

All important information (see nameplate) The ant is DEFECTIVE! Cannot be charged. Auction-ID: A1-51321-25

Universal processing machine manufactured by Marcos Inox, suitable for the preparation and processing of a wide range of products, including processed cheese, convenience foods, vegan spreads and confectionery. The machine is equipped with an electrically driven agitator for efficient product mixing, featuring a 3.3 kW motor operating at 380–420 V and 7.8 A. The lid incorporates injection ports for the direct injection of culinary steam into the product, as well as an integrated temperature sensor for monitoring the product temperature during processing. The double-jacketed processing bowl is designed for temperature-controlled processing. The bowl can be hydraulically tilted to facilitate product discharge. The lid is hydraulically operated and can be raised to a vertical position, providing convenient access to the bowl for loading, inspection and cleaning. The machine is fitted with ...

Technical details Manufacturer: Sabalpack Model: Lion Plus 10T Type: Vertical form-fill-seal (VFFS) packaging machine Year: 2008 Serial number: 08120 Power: 5.5 kW Power supply: 400 V, 50/60 Hz Air pressure: 6–7 bar Configuration: - 10-head combination weigher - Product infeed system - Film unwinding and forming unit - Vertical sealing system - Touchscreen HMI - Electrical control cabinet - Pneumatic system - Discharge conveyor Application: - Automatic weighing and packaging of cookies, biscuits and similar free-flowing food products Construction: - Stainless steel construction - Integrated weighing and packaging system Dimensions: - Length: Approx. 5000 mm - Width: Approx. 2500 mm - Height: Approx. 2800 mm Weight: 3000 kg Condition: Used Observed condition: - Complete packaging system with multihead weigher - HMI and electrical cabinet present - Weighi ...

Number of spindles: 6 St. Working width: 230 mm Working height: 120 mm Length of the planing table: 2500 mm Feed motor: 3 kW Feed speed: 5-30 m/min. control: Powercom Weinig Powermat 500 (Window Version for window producers) 5 x PowerLock -------------------------------------------------------- The machine will be a partial renovated at our warehouse prior to delivery. The interior view photos of a similar machine from our archive serve to illustrate how the machine will be renovated. Technical Summary: -------------------------------------------------------- - 6 spindles, 5 of which are PowerLock - 8,000 rpm - Large PowerCom control system - Spindles 2, 3, and 4: CNC-controlled axial adjustment - Spindles 2, 3, 4, and 5: CNC-controlled radial adjustment - Window package for glazing bead separation: pneumatic cycling for right and top spindles for bead separation Detailed Description: -- ...

Key data: 6400 mm, 1 mm

used RAS double folding machine, the RAS XXL-Center 75.06 is a Automatic swivel bending centre for the efficient production of long roof, wall and façade profiles, which independently pull in sheet metal, position it and move it upwards bends at the bottom. Thanks to automated processes, simple programming via Bendex and optional cutting module, it enables an economical One-man operation with reduced personnel costs and high productivity. Machine has been repaired, checked, cleaned by a professional and is fully functional. Test run was carried out. Working length 6400 mm Sheet thickness max. steel 1.5 mm Sheet thickness max. aluminium 2.0 mm Sheet thickness max. VA 1.0 mm Back gauge (max.) 750 mm Back gauge (min.) 6.5 mm Colour grey/yellow Total power requirement 3 kW Dimensions 9,400 x 3,000 mm Weight 12500 kg Roller scissors none Bending angle (max) 300 deg ...

Belt feeder with folding grate Belt feeder on skid frame Feed height 3 m + feed width 3.3 m Stable coarse grate, hydraulically foldable, clear distance 120 mm Take-off or feed belt AA 7 m x GB 800 mm, galvanised, Discharge height = lower edge of the discharge funnel to the ground 0.9 m Hydraulic power unit Transport dimensions approx. length 8.4 m x width 2.5 m x height 3.4 m Good, operational condition Control box must be reassembled Net price ex location 18,900,-- € + VAT Sale from location D - Bavaria Code Q27

Bain-Marie Wagen Hupfer, perfect for transporting and dispensing ready meals Auction-ID: A1-40333-108

Tool trolley, 4 trays incl 238 pcs tools, combination locks Auction-ID: A1-40333-124

Battery with automatic filling, suspension seat, led work lights, blue spot front and rear, flash light, Cascade side shift fork positioner, roof rack Auction-ID: A3-46110-600

Professional tool trolley, 7 drawers filled with 258 pcs tools 2 swivel wheels and 4 keys AND a Trolley incl. 725 pieces of tools and 2 keys Auction-ID: A1-40333-142

Tool trolley 12 drawers, 293 pcs AND an industrial vacuum cleaner 80 liters. Professional tool trolley, 12 drawers of which 11 filled with 293 pcs tools, Heavy equipment. 600 kg load capacity. Softclose mechanism. 2 swivel wheels and 4 keys. AND an industrial vacuum cleaner wet/dry, 80 liters, 3 motors a 1000w / per motor to be turned on, for wet and dry use. This vacuum cleaner is designed for maximum flexibility. Whether it's fine dust, coarse dirt or liquids: it sucks it all up Auction-ID: A1-40333-71

Professional tool trolley, 13 drawers, 11 of which are filled with 298 pcs tools. 4 keys, 2 casters Auction-ID: A1-40333-152

Power 2500w Blade Dia 185 mm Voltage AC220v Max Cutting size 63mm Constant rpm 1900rpm Auction-ID: A1-40333-137

Electric tapping machines for M3 - M16 threads. Incl. connection for cutting oil feed Angle adjustable. Quick-change chuck with slipper clutch. Adjustable via display: variable speed, adjustable depth, material selection, choice of main direction of rotation, thread selection. Documentation in English! Optional: Clamping table with grooves Type: FL-WB Thread diameter M3 - M16 metric Speed infinitely variable 300 rpm.Working range max. 1100 mm Motor power 0.6 kW Weight 30 kg Dimensions L x W x H 700 x 600 x 200 mm Condition: never used / new (5) Auction-ID: A7-51438-595

Tool trolley with 7 drawers, 5 of which are filled with tools Auction-ID: A1-40333-85

Solid Mitsubishi FD25 diesel forklift with 2,500 kg lifting capacity, automatic transmission and container mast. Machine has been used and shows normal signs of wear, but has been technically maintained (recently serviced; free-lift; tyres with good tread! STARTS, DRIVES, FULLY FUNCTIONAL Auction-ID: A3-46110-10279

Kubota KTH4815-2 Compact Telehandler Model: KTH4815-2 Type: Compact Telescopic Loader Fuel: Diesel Transmission: hydrostatic 4WD Enclosed cabin Work light + rotating beacon Quick Coupler Machine-mounted pallet forks Meter: 146.7 hours Digital Signage All-terrain tires Bucket provided Type: STD Bucket 160 cm Width: 1,600 mm Capacity: 581 liters Weight: 244 kg Year: 2021 Reference: W20CS02019 Cabin Application: T48 (Tendo) ID: GV501000002 Indicated machine base mass: 3,200 kg Protective structure in accordance with EN ISO 3449:2005 (FOPS) and EN ISO 3471:2008 (ROPS) Kubota KTH4815-2 compact telehandler with only 146.7 hours on the clock. Equipped with an enclosed cab, pallet forks and a standard 160 cm bucket with a capacity of 581 litres. Compact and versatile machine, suitable for material handling, construction site, agriculture or confined ...