141,806 used machines on RESALE, but how to find them? Machine Search
Machine completely in stainless steel Stainless steel frame with plexiglass doors with safety sensors whereby the machine stops automatically when the doors are open. Safety switches on the stars, worms and all moving parts whereby the machine stops Automatic magazine for the capsules Very well maintained All documentation available Capsule type: champagne cap applicator, champagne cap folding capacity / hour ca.: 6000 working direction: left-right Working type: fullautomatic amount of capping heads: 8
For filled products, Diaphragm: 4 pieces, Capacity: up to 100 strokes/min., Product diameter: max. 60 mm, Product temperature: -2 °C to +45 °C, Belt width: 440 mm, Belt length: 1920 mm, Belt speed: 3 - 15 m/min., Power: 3 x 400V, 50Hz, 20kW, Dimensions: 2030 x 1625 x 2281 mm, Weight: 2500 kg
A horizontal flow-pack packaging machine Cavanna is available. An on-site inspection is possible.
Format range: max. 450 mm, min. 55 mm Equipment: Longitudinal seam, quality assurance system HHS X-tend² with code reader CT 30, Glue seam inspection LNT-300, length control P4 with turntable ejector, Pre-crusher right and left, kicker, counter, small box device, Disc undergluing unit on the left, digital position indicators, clocked press belt. Overhaul 2026: cleaned, checked and equipped with new feeder and transport belts. Machine can be viewed by appointment while running.
Dimensions: 3.5 x 7m, Electricity: 9x 230v sockets and one 16A socket, Light: available, shatterproof (food standard), Ventilation: Large, professional ventilation system with filters. Supply air damper also with filter. Additional insulated exhaust duct for connecting a portable air conditioner (not included)., Sink/Water: Mobile sink from Calosy with shower, hot water, tanks for fresh water and waste water., Floor: Currently directly on the hall floor. Custom flooring can be installed if the existing hall floor is unsuitable., Door: 118cm wide, also fits wide pallets., Materials + surfaces: Clean room made of wood (solid carpentry), stainless steel surfaces, easy to clean., Upper floor + stairs: accessible, storage and workstations possible, stairs approved by the employers liability insurance association (steepness, height, steps)., General standard: 100% food-safe; this room was prod ...
For sale a professional spiral dough kneader from the renowned German company Eberhardt Backtechnik – MAXIMAT series. Industrial machine for bakery, confectionery and catering. ✔ very solid German construction ✔ stainless steel bowl ✔ spiral agitator ✔ Electronic control ✔ power supply 400V ✔ heavy duty industrial continuous work machine Visual condition as in the photos. Complete machine. Ideal for: bakery Confectionery dough production pizzas delicacies
Number of spindles: 5 St. Working width: 20 - 230 mm Working height: 8 - 120 mm Length of the planing table: 2500 mm Feed motor: 1,1 kW Feed speed: stufenlos regelbar 2-12 m/min. weight of the machine ca.: 2500 kg 1 WEINIG VARIOMAT Planing and Moulding Machine --------------------------------------- Brief Summary: --------------------------------------- - 5 spindles - Powerful motors - Cycle-controlled jointing - MemoryPlus control system - Option: Stähle-Hess Saturn single-piece sanding machine Technical Manufacturers Description: --------------------------------------- Working width: 20 – 230 mm Working height: 8 – 120 mm 1st Spindle: Horizontal Bottom --------------------------------------- Motor with brake: 7.5 kW Diameter: 40 mm Speed: 6000 rpm Tool cutting circle: 125 – 145 mm Axial adjustment range: 5 mm Rebating device incl. rebating cutters 2nd Spindle: Vertical Right --- ...
Max. sheet format: 2100x1050mm, feed depth: 300-1050mm, feed width: 400-2100mm, connected load: 2.5kW, length: 4500mm, width: 2500mm, weight: 2.5t, 3-point and longitudinal seam gluing can be carried out. An inspection on site is possible.
Size: 660 x 1040 mm Equipments: Feeder: Feeder Mode: Palet feeder Type: PFH-66 Control Unit: MCT control panel Air Stream Table Folding Units: 1st unit Type: BCUH-66 Year: 2009 Pockets: 4x Pocket Type: Combi folding plates Pocket Configuration: manual setting Rollers Configuration: manual setting Roller condition: used condition Cross fold unit with 2x knives Second Knife aligned to: Left & right Noise Protection Hood Monitor Screen Delivery: Delivery mode: Horizontal stack press delivery Type: SBP-M 46.D Technical Details: Sheet size max: 660 x 1,040 mm Pallet feeder max capacity: 800 mm height Sheet size min: 140 x 180 mm Max. mechanical speed: 200 / 230 m/min
Width 82 cm Year of construction 2015 Round Stack Feeder RFH-82 1st station: Knife shaft station SSP 82 2nd station: 6 fold pockets 82 cm Folding rollers Extra-Grip Automatic folding pocket adjustment Automatic folding roller adjustment Dual current device Standing sheet delivery SBP 86 Fully overhauled and workshop tested Machine condition: cleaned Delivery date: immediately
Width 52 cm Year of construction: 2011 Round stack feeder Extended infeed table 1st station: 10 fold pockets Roller diameter 46 mm Double downstream knife shaft 2nd station: 4 fold pockets 52 cm Roller diameter 40 mm Double downstream knife shaft Downstream knife shaft Counting device MC-Control Shed Extension ASP 66-2 ME new suction wheel, new infeed belt, new folding rollers, workshop tested Machine condition: cleaned and checked Delivery date: immediately from stock
Stock number: SD070, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 1 pc., Item: Decanter, Standing: On a frame, Dimensions: L 3216 x W 780 x H 930 mm, Total dimensions: L 3300 x W 1650 x H 1950 mm, Motor: 18.5 kW - 400 Volt - 2940 rpm, Speed: Max 4400 rpm, G-Force: Max 3030 G, Other: With control cabinet
A Thalmann long folding machine with a touchscreen control system renewed in 2025 is available. Working width: 8200mm, usable width: 8000mm, max. sheet thickness: 3mm, max. upper beam opening: 150mm, bending beam width: 12mm, feed rail: 12mm. Documentation available. An on-site inspection is possible.
Four-sided planer copper mill Model: VUIN 605 Planing width 605 mm Planing height 200 mm between upper and lower planing shaft Planing height of vertical planing heads 100 mm With additional horizontal unit Predressing table Length 1750 mm x width 400 mm, adjustable up to 12 mm Predressing shaft with 4 knives width 340 mm and Jointing cutter 20 mm, motor power 4 kW With pull-in device from above, swivelling Planing shaft bottom 5.5 kW Planing shaft top 10 kW Planing shaft right 4 kW Planing shaft left 4 kW All planing shafts as 4-knife shaft right and left spindle 4 knife shaft, equipped with 2 knives each Thickness table adjustment motorized adjustable Feed rates 7-9-11,5-14-18-23 m/min. Feed motor motor power 4 kW 3 fluted feed rollers 3 smooth table rollers 1 smooth pull-out roller Planing height minimum 3 mm Shortest piece length 350 mm The pictures s ...
Flow divider: 2 lane, Belt width: 270 mm, Power: 3 x 400V, 50Hz, 16A, Dimensions: 1750 x 1350 x 1900 mm
General SKU241P262 LocationBarneveld MakeLEWA TypeLCA Pressure Working pressure30 Bar Main Features MaterialStainless steel Volume3.33 Ltr. Motor0.18 KW Specified Features - Dosing pump Pump:ecosmart diaphragm metering pump: Capacity3,33 Ltr/h With motor0.18 KW, 230/400 Volt (EX II2G c IIC T1-T4) With variable speed drivecheck Inletdia.8mm Outletdia.8mm General Mach.No.533537-010.002 Year of construction2011 Floorspace0,4 x 0,3 M Total height0,5 M Weight30 KG Extra SpecificationsPistondia.6mmFood additivesDosing pumpsLewaIndustries > Food & Feed > Food additivesPumps > Dosing pumpsBrand > Lewa What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more ma ...
Key data: 10 , 240 mm, 160 mm
Four-sided planer Weinig Type: Unimat 23 / U 23 Year of manufacture 1994 CE Planing width 240 mm Planing height 160 mm (240 mm universal shaft) With 2 universal shafts 360° clamping length 240 mm Length of dressing table 2350 mm 10 planing shafts Arrangement of planing shafts and table rollers 1.Shaft bottom 7.5kw smooth driven roller in the table 2nd shaft right 7.5 kW 3rd shaft left 7.5 kW 4th shaft right 7.5 kW smooth driven roller in the table 5.Shaft top 7.5 kW 6.Shaft bottom 7.5kw smooth driven roller in the table 7.Shaft top 7.5 kW 8.Shaft bottom 7.5kw smooth driven roller in the table 9.Shaft Universal u, right, li, o 360° 7.5 kW smooth driven roller in the table 10.Shaft Universal u, right, li, o 360° 7.5 kW Smooth driven pull-out roller in the table Spindle diameter 40 mm Cardan feed, feed motor 8.6 kW Feed speed 6 – 36 m/min. Electric he ...
Part Number: 7995 SPECIFICATIONS - max planing width 240mm - max planing height 140mm 4 spindles: 1) horizontal bottom 240mm 5.6kW 2) vertical right 140mm 5.6kW 3) Vertical left 140mm 7.5kW 4) horizontal top 240mm, electrically adjustable up/down 0.37kW - 7.5kW - diameter of all spindles 40mm - All spindles adjustable up/down and right/left - 5 pulling, toothed, torsion shafts from above, including 1 double - 2 output rollers from above, rubber, pulling - metal roller at the bottom at the exit, pulling, split - pneumatically pressed rollers - 3 clamps on the side - electric setting of planing thickness 0.37kW - length of the introductory table top 2080mm - infinitely variable feed speed control on the inverter - feed on cardan shafts - 3.7kW feed motor - central lubrication - Extraction port diameters 4x125mm - Dimensions L/W/H 3600x1650x1700mm - weight about ...
Part number 7994 SPECIFICATIONS - max width of the workpiece 230mm - max workpiece height 130mm 7 spindle: 1) horizontal bottom 230mm 4kW 2) Vertical right 130mm 3) Vertical left 130mm (2 and 3 spindle) 11kW 4) Horizontal top 230mm 5.5kW 5) horizontal top 230mm 5.5kW 4 & 5 Spindle Electrically Adjustable Up/Down 6) horizontal bottom 230mm 4kw 7) universal 230mm, 360° adjustable 5.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - 4 pulling input rollers from above - 4 leading, pulling, rubber, smooth shafts from above, including 3 double - metal pulling roller at the bottom - feed on cardan shafts - pneumatically pressed rollers - infinitely variable feed speed control on the inverter - 3kW feed motor - working pressure 6-10bar - Electric planing thickness setting - central lubrication of the table top - length of the introductory tab ...
Rubber extrusion NBR&PVC Insulation sheet production line / available immediately The machine line can be delivered immediately, with few operating hours and in new condition. Bdeboy Exrpsmrc Ut Iec The units of the production line: 1. ￠150mm20D cold feed vacuum extruder(Standard) 2. Rubber sheet head(Pneumatic) 3. 6m infrared curing oven (width 1000mm) 4. 6m hot air curing oven(width 1140mm) 5. 6m hot air curing oven(width 1440mm) 6. 6m hot air curing oven(width 1600mm) 7. 6m hot air curing oven(width 1800mm) 8. 6m hot air curing oven(width 2000mm) 9. 6m hot air curing oven(width 2300mm) 10. 6m hot air curing oven(width 2500mm) 11. 6m hot air curing oven(width 2800mm) 12. 36m (in 3 layers12m) transmission & cooling system 13. Automatic sheet cutter & trimming machine (one) 2000 mm 14. One large Chiller with water tank 15. Gas heating 16. PLC If you are intere ...
Belt width: 250 mm, Belt speed: 1.2 - 12 m/min., Power: 3 x 400V, 50Hz, 0.5kW, Dimensions: 2150 x 650 x 1350 mm, Weight: 320 kg
Platform Base for Fortuna Roll Presses Mobile Stationary Suitable for Fortuna automatic roll presses and other manufacturers (Fortuna semi-automatic, fully automatic machine, size 3/4) With deep heavy-duty castors or stationary as required With screw-on thread Made of solid stainless steel plate
Adjustable height between belts, Belt width: 300 mm, Power: 3 x 400V, 50Hz, 16A, Dimensions: 1650 x 700 x 1600 mm
Rolling machine for ragout balls (bitterballen), Belt width: 400 mm, Power: 3 x 380V, 50Hz, 1.01kW, Dimensions: 2050 x 1200 x 1950 mm, Weight: 240 kg
In combination with Multiformer400, Only been used as a demo model, Belt width: 400 mm, Belt length: 1200 mm, Paper dimensions: 140 x 140 mm
A Friedrich Krupp flanging and grooving machine is available. Usable length: 390mm, min. container body diameter: 85mm, max. sheet thickness: 0.4mm, flywheel speed: 75rpm, weight: approx. 1000kg. An on-site inspection is possible.
General SKU327W690 LocationBarneveld MakeDrais Mannheim TypeTR400 E PS EMS 180 Pressure Working pressure40 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Extra information Max. temperature165 °C Main Features MaterialStainless steel Volume540 Ltr. Specified Features - Paddle dryer Paddle dryercheck Capacity550 l (netto 400 l ) Trough sizes± 700x800 mm Manholedia. 700 mm OutletDN125 With jacket29 l Max. temperature165°C With mechanical sealcheck Motorcheck Speed mixing shaft45-135 rpm With lump breaker1500 rpm Motorcheck MaterialStainless steel With jacketcheck General No.5700 Year of construction1998 Floorspace3,1 x1,9 m Total height3,2 m Weight5800 kg Extra information Shaft seal: double-acting mechanical seals Heating/cooling double jacket (max. 6 bar) and head condenser (vapor dome) Food additivesPaddle dryers ...
Key data: 2040 mm, 6 mm
Max. bending length: 2040 mm Max. sheet thickness: 6 mm steel Upper beam stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via dip switch Motorized adjustment of the bending beam with digital display (adjustment of the sheet thickness) Manual backgauge with spring fingers up to 1500 mm 5700 kg
Automatic foil wrapping machine which can be used for packing products like margarine or butter into aluminium foil. The machine is in a good as condition with main control panel with Siemens S7-200 PLC and frequency converter and operation panel with Siemens TD200 Operator Interface. Previously used in a margarine factory. The machine is equiped with a rotating forming drum with 4x rectangular molding chambers. The format on the machine is 250 gram, 98 x 65 x ± 41 mm. SIG folding principle (folding flap on the side, for less foil usage). The margarine is feed with a direct connection with compensator and return line. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. The speed can be adjusted by a frequency converter between 30 - 120 packages per minute (depending on product, packaging material and surrounding conditions ...
Mobile hygiene station / high-pressure cleaner Nilfisk ALTO Food ECOLAB HYBRID TYPHOON KOMPLET REAL Typhoon is a complete mobile hygiene station for professional foam cleaning for the food industry. Year of construction 2019 400 V connection, flow rate 50 l/min, max. 25 bar, max. 70 °C. Fully functional and tested Foam cleaning system for food industry/butchery/dairy Hoses and spray gun included neat condition Stock machine, immediately available! Condition see original pictures.
STERITECH Industrial Autoclave / Food Sterilizer (Diameter 1,300 mm) for canned goods, jars and packaged food products., With heat exchanger, with cooling water - System., For sale is a used horizontal high-performance autoclave from the French manufacturer STERITECH S.A., specifically designed for thermal sterilization and pasteurization of foods in cans, jars, and other pressure-resistant packaging., The system is ideally suited for:, - Canning industry, - Fine food and convenience production, - Pet food, - Soups, sauces and ready meals, - Vegetable and meat canned goods, - Glass, bowls and can packaging, The autoclave has a usable volume of approx. 5.520 liters and is equipped with a PLC/touch control. The machine operates in steam mode or steam/water spray mode and ensures uniform heat distribution for safe and reproducible sterilization processes., The present TÜV inspection certif ...
Complete overhoul with new electrics in 2016 Lift load: 1000 kg Load moment: 2400 mkg Max Rds: 400 mm Min Rds: 100 mm Speed: 0-90 m / min Driving power: 22 kW / 380V / 50Hz Total weight: 10,5 t Mode of operation: oil-hydraulic
Electric forklift, electric stacker, e-stacker, 3-wheel forklift -Manufacturer: Toyota, Electric forklift 3-wheel forklift type FBESF 15 -Load capacity: 1350 kg -Lifting height: 3300 mm -Voltage: 24 volts -Tine length: 1090 mm, cross section 80 x 40 mm -Equipment and accessories: Sideshift, clear-view mast, charger, lighting system -Operating hours: 20293 h -Battery: ibv type 8 PzS 920 K 24 V built in 05/2009 -Forklift dimensions: 1780/1050/H1980 mm / with mast height 2120 mm -Weight: 2800 kg
Motor power: 5.4kW, max. sheet thickness: 3.5mm, max. clearance: 200mm, max. bending capacity stainless steel/aluminum: 2.6mm/4.2mm, machine dimensions X/Y/Z: approx. 3650mm/1100mm/1600mm, weight: approx. 4500kg. An on-site inspection is possible.
Upsetter STANKO RYAZAN B1141 Nominal effort 1250t Max. workpiece diameter 140 mm Max. upset flange diameter 180 mm Stroke of moving slider 220 mm Stoke of upsetting slider: total/working - 460/310 mm Strokes per min 30 Matrix dimensions 700x260x820 mm (LxWxH) Distance upsetting slider and matrixes 180 mm Electric motor power 75 kW Machine overall dimensions 6400x4365x3340 mm Weight 135t Excellent condition. Very little use- it shows from the gears. Can be inspected in operation
Diameter drum: 300 mm, Length drum: 830 mm, Weight: 200 kg per piece, Shape 1: 4222891, 5 pc, 120 x 110 x 9 mm, Shape 2: 4138563, 7 pc, 102 x 92 x 6 mm, Shape 3: 4194470, 5 pc, 120 x 110 x 9 mm, Shape 4: 4207502, 5 pc, 120 x 110 x 9 mm, Shape 5: 4736478, 7 pc, 102 x 92 x 6 mm, Shape 6: 4736477, 7 pc, 102 x 92 x 6 mm, Shape 7: 4145298, 7 pc, 102 x 92 x 6 mm, Shape 8: 4728143, 6 pc, 100 x 90 x 6 mm, Shape 9: 4727037, 6 pc, 100 x 90 x 6 mm, Shape 10: 4798385, 7 pc, 100 x 90 x 6 mm
sheet width: 2540 mm plate thickness: 2,50 mm distance between columns: mm total power requirement: kW weight of the machine ca.: 2,00 t dimensions of the machine ca.: m Motorized backgauge with flip-up stops, up to 1500 mm Multiple program sequences with varying bending angles and stroke heights possible Multibend 2000 control system Ground bending beam The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
With extra long infeed conveyor of 1600 mm, Belt width: 400 mm, Product thickness: 3 - 51 mm, Belt speed: 0.36 - 24 m/min, Compressed air: 0.7 l/min, Power: 3 x 400V, 50Hz, 3kW, Dimensions: 3300 x 1100 x 1500 mm, Weight: 650 kg
diameter range 64 mm max. width across flats 56 mm max. outside dia. of round pieces 64 mm bar dia. 18-40 mm cutting length 20-72 mm output - pieces/min 140 number of forming stations 3 press power 230 t
Optical resolution: 600dpi/600dpi, interpolated resolution: 9600dpi/9600dpi, max. scan width: 42inch, scanning speed color/black-and-white: 80mm/250mm/s, max. copy area zoom: 10000%, max. number of copies: 1000/job. Machine dimensions X/Y/Z: approx. 1800mm/850mm/1400mm, weight: approx. 100kg. Including calibration sheet and glass plate. Documentation available. An on-site inspection is possible.
Reference ID PP-59295 Category Manufacturer - Model Diana 90-2 Year Built 1992 Machine Description The machine performs side gluing and bottom folding. It is equipped with an HHS system featuring three cold-glue guns. It produces boxes with a width of 90 cm and can handle small boxes with a folded section (the tuck-in flap) as narrow as 60 mm.
Format range: Boxes, folded flat: max. 400 mm, min. 50 mm Length of the boxes: max. 500 mm, min. 100 mm Equipment: Standard, left-hand delivery, own drive in the rotary module, vibrator, own drive in the delivery, infinitely adjustable via potentiometer, standalone solution via speedometer, processable materials: solid board, E-flute, carton types: Ordinary folding boxes 4+6 dot boxes, with or without lids. Overhaul 2026: cleaned, checked, painted, new belts and belts. Machine can be viewed by appointment while running.
A horizontal flow wrapping machine with side sealing Hugo Beck is available. Film feed: roll, max. film width: 500mm, film web width: 550mm, max. film roll diameter: 350mm, min. product length: 100mm, product width range: 10mm-450mm, max. product height: 250mm, cycle output: 100/min, max. mechanical speed: 28m/min. Machine dimensions X/Y/Z: approx. 2250mm/1500mm/1300mm, weight: approx. 750kg. Documentation available. An on-site inspection is possible.
diameter range 6 mm number of dies 4 number of stations (incl. cut off) 5 max.width across flats 6 mm output - pieces/min 350 cutting length 4 mm thread diamter M2-M3
A horizontal flow pack packaging machine RGD Mape is available. Packaging speed: 30m/min, max. packaging capacity: 100packages/min, product length range: 30mm-450mm, product width range: 10mm-240mm, product height range: 10mm-120mm, max. film width: 600mm, max. film outer diameter: 350mm, film core diameter range: 60mm-110mm, max. film roll weight: 35kg, machine weight: approx. 450kg. Documentation available. An on-site inspection is possible.
maximum number of results exceeded
please refine your search
