fo used for sale

- flat pile feeder - 1. Station 4 buckles - 2. Station 4 buckles - standard delivery

A foam bag system for packaging smaller and individually manufactured parts is available. Packaging capacity: 16 bags/min, film type: perforated, bag dimensions 1 X/Y: 470mm/400mm, bag dimensions 2 X/Y: 470mm/600mm. Machine dimensions X/Y/Z: approx. 500mm/500mm/700mm, weight: approx. 30kg, control: Instapak 901. Includes two component filler, spare parts, and foil bags. Documentation vorhanden. An on-site inspection is possible.

Dimensions (L/W/H): 37,8 mm Weight: 5500 kg Total power requirement: 37, kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 1270 mm plate thickness: 2,0 mm distance between columns: 1295 mm daylight opening: 46 mm : 135 ° total power requirement: Handbetrieben weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,6 x 0,8 x 1,2 m Segment bending machine, new. Segment widths: 25, 30, 35, 40, 45, 50, 75, 100, 150, 200, 250, 270 mm. Including material stop, max 660mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Format range: Box length: 80-535 mm Box width: 50-400 mm Equipment: motorized right turn / back dust margin, laser counter, speed infinitely adjustable via potentiometer. Packing scheme: 1–4 rows / layers, results in 16 possibilities. Overhaul 2025: cleaned, checked, painted, new belts. Machine can be viewed by appointment while running.

A horizontal flowpack pillow bag machine (flowwrapper) Alpha Pack is available. Packaging capacity: approx. 20-30 packages/min, max. roll width: 600mm, max. product height: 140mm, max. product length: 1000mm, min. product length: 600mm, product width range: 50mm-280mm, max. film diameter: 300mm, weight: approx. 300kg. Documentation available. An on-site inspection is possible.

Dimensions (L/W/H): 3760x1730x1750 mm Weight: 4500 kg Total power requirement: 37,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Max. bending length: 2040 mm Max. sheet thickness: 4 mm steel Max. upper bolster stroke: 350 mm Manual and automatic bending process possible Bending angle adjustable via potentiometer Lifting height of the upper beam and material thickness can be preselected via toggle switch Bending rail in top condition Manual backgauge with spring fingers 4000 kg

Dimensions (L/W/H): 4280x1900x1700 mm Weight: 4600 kg Total power requirement: 38,25 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5660x2100x1900 mm Weight: 8300 kg Total power requirement: 71,9 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4550x1850x1730 mm Weight: 5900 kg Total power requirement: 101,25 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4750x1860x1760 mm Weight: 5650 kg Total power requirement: 47,25 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4800x1950x1960 mm Weight: 5300 kg Total power requirement: 97,75 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 6000x2280x2090 mm Weight: 9600 kg Total power requirement: 84 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5250x1930x1860 mm Weight: 6650 kg Total power requirement: 71,68 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5190x1860x1830 mm Weight: 6000 kg Total power requirement: 47,25 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 2950x1180x1510 mm Weight: 1000 kg Total power requirement: 17,1 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3270x1700x1750 mm Weight: 3300 kg Total power requirement: 39,8 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4960x1900x1700 mm Total power requirement: 0 kW Weight: 6000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5830x1860x1830 mm Weight: 6300 kg Total power requirement: 54,75 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3810x1530x1525 mm Weight: 1650 kg Total power requirement: 24 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3500x1780x1750 mm Weight: 3600 kg Total power requirement: 34,25 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4280x1700x1700 mm Weight: 4600 kg Total power requirement: 43,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4191x2144x2000 mm Weight: 6500 kg Total power requirement: 54,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4960x1900x1700 mm Weight: 5600 kg Total power requirement: 47,25 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3040x1600x1680 mm Weight: 2800 kg Total power requirement: 21,25 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5620x2200x2000 mm Weight: 12000 kg Total power requirement: 94,5 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 5380x1860x1760 mm Weight: 6050 kg Total power requirement: 54,75 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4960x1900x1700 mm Total power requirement: 0 kW Weight: 6000 kg Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 4000x1780x1750 mm Weight: 4400 kg Total power requirement: 39,75 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Dimensions (L/W/H): 3630x1790x1760 mm Weight: 4300 kg Total power requirement: 42,6 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

sheet width: 2040 mm plate thickness: 4,00 mm distance between columns: mm upper beam stroke: 350 mm total power requirement: kW weight of the machine ca.: ca.4,00 t dimensions of the machine ca.: m Manual and automatic bending sequence possible Bending angle adjustable via potentiometer Upper jaw stroke height and material thickness selectable via DIP switches Bending rail in excellent condition Manual backgauge with spring fingers The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mould grinding machine OTT - KG Up to 150 mm wide with Stepless Transport Carpet Profile strip and semi-round mouldings

Weinig Hydromat 23 four-sided planer 60m/min Working width 230mm Working height 160mm Number of spindles 5 Spindle layout: 1.Lower 15kw 2.11kw rights 3.Left 11kw 4.Upper 15kw 5.Lower 7.5kw Spindle speed 6000r.p.m Spindle Diameter 50mm 3 pulling rollers in the working table Inverter-adjustable feed speed up to 60m/min Cardan shaft driven feed Pneumatic Clamps Technical documentation Machine dimensions 300x180x170cmH Weight 3500kg Net price 130.000PLN

General SKU316S1060 MakeFlexLink LocationBarneveld CEcheck Main Features MaterialStainless steel Specified Features - Cartoning &: Case Packing Machine MaterialStainless steel General No.031004-001 / 001 / 32560B.X1 Year of construction2003 Mounted in framecheck With switchgearas is Floorspace0,95x3m Total height2,2 m Weight2050 kg Extra information - cabling missing - vacuum head missing Robot Info: Number of axis: 4Maximum Load of Robot: 160 kgMaximum Reach: 2905 mmRepeatability: 0,4 mm Robot Motion Speed: Axis 1: 125°/sAxis 2: 125°/sAxis 3: 125°/sAxis 4: 270°/s Robot Applications: Palletising2D cuttingPowdered foodsGeneric medicinesTea, herbs & coffeeStarchAgrochemicalsSpicesPlastic & polymersCatalysts & fillersDetergent & surf.SugarCartoning & Case Packing MachinesOther feedSolid pharmaceuticsDyes & pigmentsMinerals & inorganicABBIndustries > Food & Feed > Powd ...

Transnorm Rising falling Incline with forerun belt conveyor GF 6000+800-600-500 RA2449 Technical data: Conveyor length (NL): 6800 mm (800 mm forerun + 6000 mm incline) frame width (NB): 600 mm, 700 mm with motor belt width (GuB): 500 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor, R27 DT80N4/BMG/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: condition: good (used) Conveying length in mm: 6800 ( 6000 + 800 ) Nominal / outside width in mm: 600 Belt width in mm: 500 Driven: YES Engine type: SEW Eu ...

Width 72 cm Year of construction 2014 Pallet feeder FP 120 Pallet feeder with Vaculift and Vacubelt MC Control 1st station: 8 fold pockets 72 cm Downstream knife shaft 2nd station: 4 fold pockets 52 cm Downstream knife shaft Shed display partially overhauled - workshop tested - new folding rollers station 1 Machine condition: cleaned and checked Delivery date: immediately from stock

Uhlmann C 130 horizontal cartoning machine ampoules / blister machine - Fully automatic blister strip packaging and simultaneous feeding of package inserts - Max. output 120 FS/min / depending on product Format: L= 70 x 150mm W= 30 x 100mm H= 15 x 85mm New hardware and software PLC Mitsubishi control and 8 inch color touch panel 10-year spare parts procurement guarantee mechanically overhauled Accessories optional: - GUK brochure folder 4-fold folding - Barcode reading of the folding box / package insert - Luminizens control, presence control for package inserts in folding cartons - Embossing station - Brochure insertion - Vacuum pump / Venturi

weight max. in kg: 2000 kg stroke: 3,3 mm fork length: 1200 mm battery: 48V / 575Ah weight of the machine ca.: 4,5 t dimensions of the machine ca.: 1,2 x 3,5 x 2,19 m Electric forklift with charger. Only 2500 operating hours New battery in 2017 3.3-meter duplex mast 2000 kg lifting capacity 2.19-meter clearance height With side shift and fork adjustment Very good condition The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 5 , 450 mm, 120 mm

TECHNICAL DATA: Working width: 450 mm Working height: 120 mm Milling spindle: Ø 40 mm Planing spindle: Ø 50 mm Lower planing spindle with counter bearing Number of spindles: 5 Installed capacity: 56 kW SPINDLE CONFIGURATION: 1: bottom (11 kW) 2-3: right-left (11 kW) 4: upper (11 kW) 5: bottom (11 kW)

Biscuit forming machine Janssen FM128 K580S used Janssen FM 128K580S pastry forming machine with 600mm working width including 2 forming rollers. The machine is mobile on rollers, completely covered with stainless steel sheets. The machine is in good visual and technical condition and can be viewed and tested in the warehouse in Bielefeld. We will be happy to send you further pictures and information on request. - 60cm sheet size - With 2 forming rollers (optionally extra forming rollers) - With additional heating - Stainless steel cladding - Automatic sheet metal feeding - For trays: 60x40cm, 60x80cm or 60x100cm - Heating: 2 x 2000W - Connected load: 380 volts

Air steam die forging hammer : Capacity : 16 tons, Nominal mass of drop parts : 16000 kg, Impact energy : 400 KJ, Ram stroke : 1500 mm, Ram stroke per minute : 20, Distance clear between guides : 1180 mm, Ram dimensions front to back : 1500 mm, Die holder dimensions front to back : 1600 mm, Bottom die impression to floor distance : 500 mm, Steam/air pressure : 0.7-0.9 MPa, Overal dimensions : - Floor space : 4500 x 2450 mm, - Height above floor level : 7920 mm, Mass of anvil block : 325 tons, Total weight of hammer : 425 tons.

General SKU430U1380 MakeHOF Sonderanlagenbau GmbH LocationBarneveld CEcheck Main Features MaterialStainless steel Surface0.74 m2 Specified Features - Freeze dryer Freeze dryervacuum dryer Cooling surface0,74 m² Number of plates6 Plate sizes620x320 mm Between the plates120 mm With cooling compressorcheck Cooling mediumR404a MaterialStainless steel 1.4571 (316Ti) General No.GT-26049 Year of construction2007 With switchgearcheck Floorspace2,7x1 m Total height2 m Weight2400 Extra information Volume of the drying chamber: 340 L Pressure range of the drying chamber: -1 / +0.01 bar The freeze dryer is equipped with a vacuum pump: Brand: Pfeiffer Type: DUO 20M Volume: max 24m³/h Powdered foodsGeneric medicinesFine chemicalsBiotechnologyFeed additivesFreeze dryersCosmeticsFood additivesSolid pharmaceuticsBiopharmaceuticalAPIHof Vakuum- und KaltetechnikIndustries > Food ...

The Haloila Octopus Junior stretch wrapping machine is a suitable solution for safe and efficient pallet wrapping. Thanks to its compact design, low energy consumption and automatic winding function, it can be easily integrated into production processes. This model from 2012 was used in the beverage industry and was regularly maintained. The current condition and technical details can be assessed during a visit.

M. No.: 46131 Equipment / Additional information: Stamping surface with heating head: HKAC max. 100 x 125 mm // HKBC max. 140 x 230 mm Stamping pressure at 6,5 bar with: 1 Zylinder ca 400 daN (kp) // 2 Zylinder ca 800 daN (kp) Readjustable stroke, dep. on pressure producer: 0-40 mm / 0-100 mm Max. passage height without/with sliding table: 300 mm / 275 mm Readjustable foil advance: 0-230 mm Max. foil width: 140 mm Heating voltage: 220 V / 50 Hz Heating capacity with heating head: HKAC 540 W // HKBC 900 W Temperature measurement by means of: Fe-Ko Max. output, hourly cycles: ca 4000

- Thermal oil boiler - HTT WTÖ 200 - HTT WTÖ 160D - Daub KO 160 - all with oil burner

Key data: 8020 mm, 3 mm

with hydraulic scissors, emergency stop rail, attachment rail, control on the swivel bracket, radius adjustment. The connection Hydraulic power unit is behind the machine. Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is carried out. Working length: 8020 mm Sheet thickness steel: 3.0 mm Sheet thickness aluminum: 4.0 mm Sheet thickness front: 1.5 mm Back gauge (max.): 1000 Radius: 1020 Colour: grey/blue Total power requirement: 46 A Space requirement: 10,000 x 2,300 mm Insertion depth: 1000 Machine weight: 8000 kg Oberwangenhub: 200 Roller shears: 3.0mm Number of stands: 10 with cutting device for cutting to length/ Öffnungsweite_ h 200 Max. bending angle: 143 crowning without underbeam adjustment Back gauge (min,) 15 Machine number: 09488-01/K19149

General SKU418W1320 MakeDe Dietrich LocationBarneveld TypeSR-250 Pressure Working pressure6 Bar Vacuum possiblecheck Working pressure jacket10 Bar Vacuum possible jacketcheck Main Features MaterialGlass Type of tumble dryerdrum-dryer Volume285 Ltr. Motor0.75 KW Specified Features - Tumbler dryer Double cone tumbler dryercheck Capacity285 Ltr Diameter772mm Cylindrical length344mm Conical length293/168mm Inlet/man hole dia. 400mm Outletdia. 200mm With jacket(90 Ltr) Max. temperature-30/+200°C Motor0,75 KW, 400 Volt (Ex) MaterialGlass - Enamel (3009U) With jacketcheck General No.25394 Year of construction1997 Floorspace2,5x1,2 m Total height2,8 m Weight1700 kg Extra information the vacuum arm inside is made of material 2.4951 Powdered foodsGeneric medicinesStarchBiotechnologyAgrochemicalsTumbler dryersCatalysts & fillersFeed additivesOther pharmaceuticsC ...

General SKU281W438 LocationBarneveld MakeLeistritz Sizes Screw diameter30 mm Main Features Motor16 KW Inlet diameter65 mm L/D30 Specified Features - Double screw extruder Double screw extrudercheck Number of hours3457 Screw diameter34 L/D30 Counter rotatingcheck Ventedcheck With vacuum pumpcheck Number of heating zones:6 Electric heatingcheck DC-motor3 kW (380 V) Screw speed110 rpm Feeding with hoppercheck Exchangeable segmentscheck MaterialStainless steel General TypeLSM-30 34 GG Mach.No.330182401 Year of construction1990 With switchgearcheck Sizes switchgear700 x 500 x 450 mm Floorspace2,75 x 0,91 m Total height2 m Weight1000 kg Extra SpecificationsScrew Dia. 34 mm, center distance 30 mm, screw thread depth 4 mm, 6 heating zones, 7 cool zones,gear speed 2200 rpm / I=20 rpm,Resotec control, extrusion packPowdered foodsAgrochemicalsPlastic & polymersCos ...

For sale is an A100 Vertical Form Fill Seal (VFFS) Packaging Machine, complete with: Inclined Infeed Conveyor (for product loading) Outfeed Conveyor (for efficient bag discharge and handling) This is a turnkey automated packing line suitable for a wide range of food and non-food applications. Features: A100 VFFS machine – fully automatic, forms, fills, and seals bags. Inclined infeed conveyor – ensures consistent and efficient product feeding. Outfeed conveyor – transports finished bags away from the sealing area. Stainless steel construction – hygienic and easy to clean, ideal for food production. Compact footprint – space-saving design. Control panel with emergency stop – user-friendly operation. Condition: Machine is in excellent condition and has been used only sparingly. Well maintained, clean, and ready for immedi ...