140,871 used machines on RESALE, but how to find them? Machine Search
Weight: 0,08 tons Length mm: 1900 Width mm: 550 Height mm: 700 Condition machine : Moderate Photos/film available: Photos available
Pallet feeder – separating head 4 buckles 2 knives Navigator Vaculift Vacubelt A76 belt delivery
Lippert Belt Conveyor Folding Belt GF 1360-750-600 RA1829 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 1360 mm Frame width (NB): 750 mm belt width (GuB): 600 mm height (BH): 105 mm Belt height: 550 mm total height: 1070 mm basic dimensions: 1270x1180 mm Tilt height difference: 300 mm Conveying speed (v m/s): 0,05-1,5m/s Drive: SEW gear motor S37 DT71D4/MM03/BW1 Electrical data: conveyor belt motor: 50Hz V380-500, kW 0.075 / 0.37 / S1 Tilting motor: 50Hz V220/400, kW 0.55 / S ...
A Linde electric forklift truck in need of repair is offered. Weight: 2250kg. The battery is in good condition and the forklift truck is operational. The lift control is defective and the sideshift has been fixed in position. An on-site inspection is possible.
Lippert Belt Conveyor Folding Belt Switch track conveyor belt 1090-650-500 RA1399 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. The conveyor belt was used as a folding belt. Folding device was removed during dismantling. On request, we can also supply this conveyor belt as a folding belt version. Technical data: Conveying length (NL): 1090 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency co ...
We offer a refurbished Dokadek - 159,63m² with 70% discount All elements are made with original Doka Xlife formlining. The formwork was only used 1 x, was cleaned and checked and is in top condition New value approx. 102,205.60€ Special net price: 30.661,68€ 10 Dokadek element 0.81 x 2.44m 47 Dokadek element 1.22 x 2.44m 25 Dokadek balance beams 2.44m 21mm 26 Dokadek balancing beams 1.22m 21mm 10 Dokadek balancing beams 0.81m 21mm 63 Dokadek Wall Head 66 Dokadek support head 10 Dokadek Corner Head 5 Dokadek's crosshead 3 Dokadek mounting rod B 1 Dokadek stripping tool 25 Dokadek suspension brackets H20 3 Dokadek wall brackets 5 Dokadek panel pallet 1.22 x 2.44m 1 Dokadek panel pallet 0.81 x 2.44m 2 Dokadek range of compensating beams 3 Doka reusable containers 1.20x0.80m If you have any questions, please call 0049 176 70044689, Mr. Becker. Purc ...
sheet width: 3200 mm plate thickness: 2,5 mm weight of the machine ca.: 3,5 t Tools recentely grounded. Bending angle preselection via potentiometer The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
-Continuous forms Collator Bama -Year 1990 -Six stations -Continuous delivery with speed controls -Crimp lock, Multiflex on both sides -Gears size 8”-11”-12”
Base plate, site fence base, barrier base -Footplates: made of concrete, 19 pieces -Intake: 6x Ø 45 mm -Price/delivery: complete -Dimensions: 620/220/H130 mm respectively -Weight 33kg/pc -Total weight: 627 kg
large working width: 2040 mm for iron sheets up to approx.: 1 mm Dimensions: 2650 x 650 x 1180 mm Weight: approx. 680 kg
Printing technology: inkjet, ink technology: Epson UltraChrome HDR, color system: 11colors, max. printing resolution X/Y: 2880dpi/1440dpi, max. media format: 44inches/B0, media feed: roll paper/cut sheet, media thickness range: 0.08mm-1.5mm, interfaces: USB/Ethernet. Machine dimensions X/Y/Z: approx. 1864mm/667mm/1218mm, weight: approx. 116kg. An on-site inspection is possible.
Load capacity: 1600kg, lift height: 3300mm, engine: Ford, drive: LPG. UVV inspection sticker 2026 available. The hydraulic system was serviced in 2026. Documentation available. Inspection by appointment possible.
Size: 520 mm Equipments: Exchangeable casettes format change system Perforation unit for Business forms Remaliner finishing options: Roll to Fold, Roll 3 Offset units 3 x 22 Inch printing unit inserts
Size: 520 mm Equipments: Exchangeable casettes format change system Web offset cassette: 2 x 24 Inch, 2 x 17 Inch Fountain water system Technotrans 4 Offset units Roll to Roll
Size: 560 x 900 mm Equipments: Flat pile feeder 6 bags Cross-fracture aggregate Integrated cutterblocks Electrics & Meters Maximum format: 560 x 900 mm Minimum format: 100 x 150 mm
ILLIG SZS73 Counter Stacker, age 2007 Effective Working Area: 740 x 340 mm Max. Part Height: 150 mm Formed Part Stacking Length: 800 mm Siemens S7 PLC Controls Siemens SINAMICS Motor Drives Rittal Control Cabinet Cooling Unit with Temperature Display. This ILLIG SZS73 was working Inline with a Generation 3 ILLIG RDM70K Line. With Snap -Stacking Brush Stacking Cascade Stacking The Counter/ Stacker is in v. good production Condition, it is clean and in a very good Optical condition as well
Load capacity: 3.5t, permissible gross weight: 10500kg, operating hours: approx. 4538h. An on-site inspection is possible.
POLYTYPE BDM 611/ 916, 8-Color Cup Printing Line, age 1999 Consisting of: Elevator Tray Feeder Cross Conveyor feeder Universal screw Denester ARCOTEC CG30 Corona Pretreatment System with Arcotec Leak Tester 8-mandrel Indexing Turret, with Mandrel Holders for Cups UVITERNO Model Mono-Jumbo 8015, 9 kW, UV Curing-On-Mandrel Positive Blow-off, final dual Timing Belt take-off Conveyor to counter Stacker station with Ejector Tray. Max. Cup dia.130 mm Min. Cup dia. 60 mm Max. Height of Cups 150 mm Min. height of cups 35 mm Max. Printing Length : 362 mm Taper 2 - 10 degs Max. speed depending on size & shape of Cups: 36,000/ hr Siemens S5 PLC Controls Siemens CORTOS OP25 display with Touch-pad Controls.
Used POLYTYPE BDM 501, 6-Color Round Cup Printer, age 1994 Consisting of :- Automatic Elevator Tray-feeder Cross Conveyor to main Print unit Universal screw Denester CUBITRON Corona Pretreatment System 8-mandrel Indexing Turret, with Mandrel Holders for Cups 6 x individually hinged dry-offset Print Heads Each Print Head consisting of Print cylinder, radial and axial Print adjustment with micro-register during operation of the Printer 2 x Form Rubber Rollers dia. 71 and 100 mm 2 x Oscillating rollers 2 x Idler Rollers 1 x Ink Transfer roller (Ductor Roller) 1 x Ink Fountain Ductor Rollers water cooled Ink Washing System on Print Heads UVITERNO Dual Lamp UV Curing-On-Mandrel Dual Belt Take-off with Air Assist Short conveyor to counter Stacker station Return Elevator Tray Feeder Max. Cup dia. 135 mm Max. Height of Cups 130 mm, Min. height of cups 35 mm Max. Printing ...
Specifications: - Max. working width 2520 mm - max. material thickness at 40 kp / mm², strength 3.5 mm - Bending angle adjustment can be preselected - Upper beam drive 400 V / 1.1 kW - Bending beam drive 400 V / 4.0 kW - Space requirement approx. W 3900 x H 1550 x D 1200 mm - Weight approx. 4500 kg
Aluminium Z-conveyor belt incl. substructure Horizontal range 1,200mm (customizable) Rising range 3,000mm (customizable) 2nd horizontal range: 1,200mm (customizable) Angle in the bend 45 degrees each Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable (can be moved) Conveyor belt width 700mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m-0.5m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 8x adjustable machine feet for alignment Scalloped edge: 80x50mm T-65Studs - 150mm 2-layer particularly transversely stable We always have various systems of this type in stock. The delivery time of an individual system is currently ap ...
Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium flat conveyor belt incl. substructure Horizontal range 5,000mm (customizable) Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable, machine feet Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m-0.5m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Scalloped edge: 80x50mm flush with both sides 2-layer particularly transversely stable We always have various systems of this type in stock. The delivery time of an individual system is curr ...
Mains connection: 3P + PE, operating voltage: 400V, frequency: 50/60Hz, control voltage: 24V DC, connected load: 3.5kVA, rated current: 4.8A, total current: 4.8A, upstream fuse: 3×16A. The machine is in perfect condition. An on-site inspection is possible.
Folding machine MB multipli-cas 524 Folding machine MB multipli-cas 524 Serial-No. 78261
Hot Foil Stamping KIS MIC Junior Heißfolienprägemaschine / Hot Foil Stamping KIS MIC Junior Year 1982 - Serial-No. MJ1282520 Prgefläche / Hot Foil Stamping area max. 75 x 180mm Druckleistung / Pressure max. 600Kg
Falzmaschine / Folding machine Heidelberg TD66/6-4-4 Year 1998 Round Pile Feeder Folding Type 6 - 4 - 2 buckles Press Delivery
Eccentric shaft for hot forging press K8548 6300T Weight, kg 27 800
Drive gear for hot forging press K8548 6300T Weight, kg 15 700
Driven gear for hot forging press 6300T Weight, kg 1300
Clutch hub for hot forging press K8548 6300T Weight, kg 7100
Magnetfundamentplatten / Flint Magnetic Foundation Plate Heidelberg OHT / GT Flint Magnetic Foundation Plate Heidelberg OHT / GT
Ladegerät für Elektrostapler - Charger for eletric Forklift Still D 48/125 eco Baujahr / Year 2005 - Serial-No. 0552547/00005/02/2 Eingangsspannung / Input AC3/PE - 400V 50Hz 10,4 kVA 15,0A Ausgang / Output DC 48V/125A
Key data: 6400 mm, 1 mm
with the following equipment: Brand new JC100 controller Stop system type 20 conical 5 stop fingers standard Roller Shears SL 1.5 mm Material thickness adjustment type HM per stand dynamic positioning type DP Super High Speed Hydraulics (shs) LED lighting with signal function Safety according to BG Colour RAL 7016 anthracite grey/RAL 2004 light orange Total power requirement 16 A Insertion depth: 1250 mm Roller Shears SL 1.5 mm Number of stands: 6 pieces Opening width: 200 mm Bending angle 145 degrees Dimensions: 7800 x 1700 mm Weight: 5300 kg
Eletric Forklift Linde L 12 Elektrischer Hochhubwagen / Eletric Forklift Linde L 12 Baujahr / Year 2001 - Serial-No. W4 X379 M 03408 Tragkraft / forklift lifting capacity max. 1200kg Hubhöhe / Lifting high max. 3324mm Mit Ladegerät / with Charger
Key data: 8020 mm, 1 mm
with electric cutting device with 10 stand units with motor scissors New CNC control single program MAS with touch screen with rotary wheel Projection: approx. 100 mm Colour: green Total power requirement: 400 V Motor power: 5.5kW Upper beam stroke: 190 mm with electric roller shears Power: 8020 x 1.5 mm steel, 2.0 mm aluminum Dimensions: 9200 x 1400 mm Weight: approx. 3650 kg Machine has been repaired, checked, cleaned by a professional and is fully functional. Test run was carried out.
Coupling Box for Folding Machines Heidelberg Coupling box I. Koppelbox für Falzmaschinen - Coupling Box for Folding Machines Heidelberg Coupling box I. Year 2003 - Serial-No. 848-300
Hydraulic folding machine - ordering machine (delivery time approx. 10-14 weeks), incl. hydraulic dynamic crowning, touch screen, Pressure regulation of the upper beam, back gauge (1000mm), goat's feet with automatic tool clamping, electr./hydr. Adjustment of the bending beam -Similar to illustrations- hydraulic CNC bending machine - order machine (delivery time approx. 10-14 weeks), incl. hydraulically dynamic camber, touch screen, pressure regulation of the upper beam, backgauge (1000mm), goat feet with automatic tool clamping, electric/hydraulic adjustment of the bending beam -images similar-
Width 78 cm Year of construction 2006 Round Stack Feeder RFH-82 Upstream knife shaft 6 fold pockets in the parallel fold section Automatic folding pocket adjustment Automatic folding roller adjustment Downstream knife shaft 2 folding swords in the crossfold section 1 more fold pocket after the 1st cross break Noise Insulation Hood without display partially overhauled (new folding rollers) Machine condition: cleaned and checked Price on request. We deliver and install worldwide!
Counter: 1,200,000 units Cycle counter: 8,297,167 cycles Hour counter: 5,281 hours Equipment / Additional information: Machine consists of: 1 x Main feeder 1 x Opener 4 x Insert stations 1 x Wrapping system (10,000 cycles per hour) with side sealing 1 x CROSS STACKER RIMA 1 x Friction feeder 1 x Mosca inline coating unit 1 x 90° curve Options: 1 x Videojet BX 6500 ( 2019 ) TECHNICAL DATA Product infeed: manual as standalone/automatic in line Film: centre-folded and flat film, e.g. PE, PO, PP, bio films, recycled content films Output: max. 10,000 cycles/h Passage width: 10–450 mm Passage height: max. 200 mm Product length: min. 80 mm Film width: max. 1,000 mm (flat film) Film roll diameter: max. 350 mm Control system: Siemens Sinamics D Display: Siemens 9" TP 900 touchscreen Electrical design: in accordance with VDE guidelines Working height: adjustab ...
Key data: 6 , 200 mm
Front side planer / automatic planer
We offer used slab edge formwork brackets Available: 52 pieces 15,00€/piece net Box 30,00€ net Application: Suitable for ceiling thicknesses of up to 50 cm. You can concrete ceiling edges flush with the wall or overhangs (overhangs) up to approx. 45 cm. Operation: Formwork is installed and removed safely from the ceiling that has already been laid. Safety: Many consoles have a bracket for guardrails or posts to mount fall protection. Flexibility: The stop can usually be moved continuously without a fixed grid. If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Phone 07305/9562350 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Ulmer Straße 1 89 ...
Nominal force, tf 1000 The slider does not reach BDC, mm 12.5 Slider stroke, mm 600 Frequency of continuous strokes, min-1 12...18 Highest frequency of single strokes, min-1 9...13 Closed height, mm 1500 Adjustment of closed height, mm 400 Slider dimensions, mm from left to right 4500 front to back 2500 Dimensions of the die plate, mm from left to right 4500 front to back 2500 Main drive electric motor power, kW 200 Overall dimensions, mm from left to right 6745 front to back 5400 height above floor level 9360 Weight kg 320000
GFM SX-45 Radial Forging Machine Year: 70’ Number of forging hammers: 4 Forging force (per ram): 800 ton Number of forging strokes (per ram): 265 /min Hammer length: 490 mm Max workpiece: Ø450/□ 340 Hollow spindle I.D.: 295 mm Chuck head max clamping: 450 mm Stroke of chuck head A: 7.500 mm Stroke of chuck head B: 8.500 mm Chuck head max feed speed: 300 mm/sec Adjustable chuck head feed speed: 0-140 mm/sec Adjustment of rams (on diameter): 200 mm Cooling water inlet pressure: 3-8 atm Cooling water max inlet temperature: 30°C Circuit flow: free Cooling water flow: 140.000 l/h Compressed air pressure: 6-8 atm Compressed air connecting point: ca. 2.5-3 m3/min Connected power: 400V (), 650KW, 6000V, 500KW () Total weight: 540 Ton
NISSAN FD02A250 Diesel Forklift Year of manufacture 2005 Operating hours 1,534 /h Full cabin Lifting height 3300mm Load capacity: 2500 kg 3rd + 4th valves ( sides and zinc adjustment ) Drive type: Diesel Fork length 1200mm Nominal load capacity for LSP 2.5 t Load center 500 mm Tyres SE 4 Gearbox type W Weight 3.87 t Overall width 1157 mm Overall height 2145 mm Turning radius: 2.25 m Travel speed with/without load 18.5/18.5 km/h Lifting with/without load 0.64/0.69 m/s Lowering with/without load 0.5/0.5 m/s max. climbing ability 25 % D02 Series Engine manufactur. Nissan Engine type TD 27 II Engine power 42 kW
Working width: 2800 mm Roller width: 3000 mm Number of rollers: 2 Stück Supporting roller - dia: 340 mm Roller covering - soft rubber: 75 Grad shore Swimming roll - dia: 270 mm Roller covering - ebonit: 100 Grad shore Pressure line: 15 N / mm Pressure total: 16 to Cloth guiding system for woven fabrics: geb. Breitstreckwalze Liquor trough with guide roll: + Verdrängerkörper Drive side: rechts Operting side: links Drive shaft: dia 80 mm Hydraulic unit for separately pressure: Links-Mitte-Rechts total power requirement: 12 kW weight: 4000 kg range L-W-H: 3,6 x 2,2 x 2,8 mm • new control system from Küsters - delivered in 2008, • with quick cleaning, • without being overhauled, The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 3400 mm Roller width: 3600 mm Number of rollers: 2 Stück Supporting roller - dia: 340 mm Roller covering - soft rubber: 75 Grad shore Swimming roll - dia: 270 mm Roller covering - soft rubber: 75 Grad shore Pressure line: 50 N / mm Pressure total: 18 to Clouth guiding system for knitted fabrics: geb. Breitstreckwalze Liquor trough with guide roll: + Verdrängerkörper Drive side: rechts Operting side: links Drive shaft: dia 80 mm Hydraulic unit for separately pressure: aus Edelstahl main drive motor: 15 kW total power requirement: 20 kW weight of the machine ca.: 6 t range L-W-H: 4,0 x 2,2 x 1,9 mm • 2-Bowl-Finishing-Padder with Supporting roll and S-Roll • driven expander in front of the squeezing nip, with adjustable guide roll for adaption of the enlacement at the expander roll. • Liquor trough pneumatically lift- and lowerable, with 1 guide roll at trough ent ...
# Description text for the press If the press does not exactly meet your requirements, please request an individual offer exactly according to your wishes with one click: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your wishes at surprisingly low prices! Mold opener-closer with 40 tons pressing force Table and ram size: 1500 x 1000 mm for heated tools Specifications: - Pressing force: 40 tons - Maximum open height: 1800 mm - Tappet travel: 1500 mm - Oil Temperature Monitoring: Electric Air Cooling - Lubrication: Manual via grease fitting - Extending table travel: 1200 mm - Extending table speed: 30 mm/sec - Electrically infinitely variable ram: 180 degrees - T-slots: According to customer requirements - Pressure setting: From 10 tons to 40 tons - Monitor: 10" on the control cabinet for pressure adjustment and warning ...
Forklift battery charger, industrial charger, forklift battery charger, industrial charger, silicon rectifier, charger for scrubber-dryer -Manufacturer: FDK, charger type E230 G24/10 B-FDK -Input voltage: 230 V 50 Hz -Power: 24 V/10 A -Dimensions: 430/255/H215 mm -Weight: 12.4 kg
maximum number of results exceeded
please refine your search
