126,737 used machines on RESALE, but how to find them? Machine Search
CNC - controlled electromotor precision sheet cutting machine (swing bending machine) with automatic bending angle monitoring 15" touchscreen with graphics - selector switch for one- or two-person operation, maximum bending length 3,100 mm, maximum sheet thickness ST42 - 3 mm, upper cheek angle 160°/140° - upper cheek stroke range up to 240 mm, Rear stop with 12 foldable stop fingers - stop range 12 to 750 mm (optional 1,000 mm or 1,500 mm) - travel speed adjustable - up to 500 mm/sec, working height approx. 830 mm, drive power 9 kW, dimensions approx. 4.6 x 1.8 m (depending on rear stop) x 1.9 m, weight 3,800 kg
CNC - controlled electro-hydraulic precision long-bending machine (swing bending machine) with automatic bending angle monitoring 15" touchscreen with graphics - selector switch for one- or two-person operation, maximum bending length 6,050 mm, extension 1,250 mm, maximum sheet thickness ST42 - 3 mm, maximum bending angle 135° - upper cheek opening range up to 200 mm, rear stop with foldable stop fingers - stop range 12 to 1,200 mm - inclination up to 40° - travel speed adjustable up to 500 mm/sec, working height approx. 830 mm, drive power 7.5 kW, dimensions approx. 6.4 x 1.8 m x 1.5 m, weight approx. 8,500 kg
Conventional or NC - controlled heavy electrohydraulic sheet metal bending machine (swing bending machine) of excellent quality Largest bending length 2,540 mm, vertical particularly stiff upper cheek - largest bending angle 100° - electric motor bending cheek drive (one motor left + right each) - hydraulic upper cheek movement with synchronisation control - largest opening width 230 mm, Working table height 870 mm, drive power hydraulics 4 kW - drive power bending cheek 2 x 1.5 kW, dimensions without rear stop 3.6 m x 1 m x H 2.15 m, weight without rear stop 4,300 kg
Pallet feeder – separating head Vaculift - Vacubelt 6 buckles Gate fold Compressor Without delivery
Format range: max. 1100 mm Equipment: Longitudinal seam, folding bottom, double edge, 4+6 dot gluing, feeder with suction belt and vibrator, electronic servo overhaul folding with touch screen and job memory, Accufeed (cutting orientation right / left after the feeder), primary crusher right and left with additional central transport top/bottom, disc bottom gluer on the left, electronic upper gluer ERO, 8 channel with 4 application heads, radio remote control, extension module A2 with lower upper central transport, Central transport at the top / bottom in folding, pressing device left/right, digital position indicators, pneumatic kicker, cutting alignment and video monitoring on the press belt, pneumatic, extended press belt.
Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K (refurbished in 2003) Thermoformer with auto-start facility Indramat Servomotor Indexing Top & Lower heaters Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder & Blower
Stock #U2450-1 Used foaming mixer by Kinematica AG (CH) type MEGATRON FM 19-120/2 LR-P. Machine has working output in range from 40-200 l/h, depending on product. Maximal viscosity of product up to 10000 mPas. Foaming head is equipped with heating/cooling jacket and can work at pressure up to 23 bar and temperature up to 90C. Rotor works with adjustable rotation - in range from 375 up to 750 rpm. Main drive power consumption - 11 kW. Contact parts with product designed in stainless steel AISI 316L. Mixer is equipped with integrated lobe pump by Tri-Clover/Tri-Clamp, driven by el. motor with power 0.75 kW. Working pressure up to 23 bar. Maximal rotation of lobes - up to 370 rpm. Gase feeding system - dosing air/N2 - at pressure up to 25 bar, temperature up 20C, flow range - 0.5 to 15 ln/min. Machine is mounted on mobile stainless steel frame with local control panel. Last time used in fo ...
power of 1.1 kW / 2,9A / 380V / 50Hz; the weight of a piece of 500 - 1200 g; productivity up to 1200 pcs / h; weight approx 280kg.
Qty. 1 Second-hand crank hot forging press – dismantled & in storage Mfc.: Hyunjin Industry, Korea Built: 2008 Status: dismantled and in storage Force: 2500 T Total weight of the machinery: approx. 250 T
We offer Noe Top 2000 wall formwork in ready-to-use condition. The elements are galvanized and covered with plastic formwork lining. Price without accessories 59,00€/m² net. 20 panels 2650 x 3310 4 panels 2650 x 2650 52 board 2650 x 1325 14 panels 2650 x 125 4 panels 2650 x 100 1 board 2650 x 75 3 panels 2650 x 49 1 board 2650 x 40 The formwork is compatible with the Doka Framax and so are the accessories. Doka accessories available on request. If you have any questions, please call 0049 176 70044689 Mr. Becker Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.d ...
Grinding machine for curved parts Molded part grinding machine Make Calmbach & Söhne Double-sided grinding of shaped parts Oscillating rubberized grinding rollers Workpiece thickness maximum 120 mm Workpiece width maximum 130 mm Engine strength 2 motors 1.5 kW each Oscillation electromotor 4 speeds Suction connection diameter 120 mm Includes 20 grinding belts grit 60 + 120 Dimensions 1200 mm x 1500 mm x H 1550 mm
We offer a refurbished Peri Trio 270 formwork 198.28m² complete with accessories as follows. Frame cleaned, corrosion sealed with zinc phosphate coating. New original Peri Finply formlining. Accessories new, or Peri rental storage quality. New value approx. 145766,50€ Special net price 64706,00€ approx. 56% discount Pcs. Description 16 Element TR 270 x 240 new frames, new formlining 8 Element TR 270 x 120 new formlining 8 Element TR 270 x 90 new formlining 4 Element TR 270 x 72 top used formlining 4 multi-purpose elements TRM 270 x 72 new formlining 10 Element TR 270 x 60 new formlining 8 Element TR 270 x 30 new formlining 2 stripping elements TR 270x 24 new formwork lining 6 Corner TE 270-2 new formlining Accessories TRIO 130 Richtschloss BFD, verz. 30 TAR 85 compensating bolts 16 Scaffolding bracket TRG 80 2 Moving hooks MAXIMO 1.5 t new 1 new MX trans ...
complete stainless steel Track width 600 mm Adjustable height of the finished product from 2 to 35 mm stepless speed (lower and top belt can be adjusted separately) with executable belt Mobile 0.5 kW Dimensions (L x W x H) : ± 2,250 x 1,000 x 2,100 mm
Key data: 2040 , 2
Motorized swivel bending machine Manufacturer Fasti Type 2095-20-2 Sheet power 2040 x 2 mm at 400 N/mm2 Digital display of the bending angle Foot pedal Notaus Power connection 400V
Furnace 650 inner 1x1x2m t max 650C PLC could be various size Ölbrenneranlagen Retortenöfen Teil-Vakuum Rollenherd - Durchlauföfen Rohrglühöfen Salzbadöfen Schmiedeöfen Schachtöfen Stoßöfen Schüttelherd - Härteöfen Schutzgas Topfglühöfen Tiegelschmelzöfen Truhenöfen Transporttiegel für Flüssigmetall Transport - Warmhalteöfen für Flüssigbeschickung Umschmelzöfen für Aluminium Verzinkungsöfen Vergüteöfen Warmhalteöfen
complete set: DEMAG 50T ERGOTECH COMPACT 50-200 1999 (-) ENGEL 75T ES330/75 VICTORY 2001 (working hours 81694) working good tech. condition T557211 for both machines 10 000 EUR
furnace 1200 1x1x2m t max 1200 Celsius plc auto door various size possible Industrieöfen- Fertigung und Reparatur jeglicher Art Wartung und Einregulierung von Industriebrennern Industrieöfen für Öl, Gas oder elektrisch beheizt Umfangreichen Sortiments an Feuerfeststeinen, Feuerfestmassen, Isoliermaterialen und Gießereihilfsstoffe namhafter Hersteller. Renovierungen und Instandsetzungen von Ofenanlagen Brenner einstellungen von Ofenanlagen Modernisierungen von Ofensteuerungen Umrüstu ng von elektrischen Öfen auf gasbeheizte Öfen Umrüstung alter Heizsysteme auf Rekuperation Öfen Verzinkungsofen Ve rgüteofen Anlassofen Industrieöfen Glühofen Ovens laboratory ovens industrial furnaces industrial furnace plants Industrial Furnaces high-temperature chamber furnaces hardening furnace anlageHärteöfen Annealing furnaces Conveyor belt Abg aswäscher Abkühlungs ...
3500 SSI Schaefer EURO-Dimension 643-66 Features • Material: High quality polypropylene (PP) • Color: Blue / Gray • Volume: 60 litres • External dimensions: 600 × 400 × 320 mm • Internal dimensions: 570 × 370 × 305 mm •Ultimate load: o Static: 40 kg o Load (stacked): 180 kg • Temperature resistance: -30 °C to +60 °C • Weight: 2.8 kg • Foldable: Yes (reduces volume by 81%) • Floor & Walls: Closed • Handle: Handle-through handle for easy transport Price € 14,- net excl. VAT • Quantity discount: € 11 per piece when buying a pallet (100 pcs.) • Shipping costs: Europe-wide on request • Delivery time: Immediately available • Viewing and pick-up: possible at any time by appointment The box in EURO size 643-66 without lid (60 l) from Schäfer Shop is a robust, stackable plastic container, ideal for storage and transport in indust ...
large working width: 2040 mm for sheets up to: 4.5 mm Opening width upper cheek: 320 mm Adjustable bending cheek: 120 mm Upper cheek drive: 2.2 kW Under-wall drive: 2.2 kW electr. Connection: 5 kW Weight: 3700 kg Space requirement: 3250 x 1000 x 1900 mm
We offer formwork Peri Trio 270 x 120, 14 pieces with a 65% discount on a new value of €1,786.00/pc = special net price €625.10/pc. Frame top used condition, cleaned, primed and painted with zinc phosphate coating. The formwork is completely overhauled, with top used original Peri Finply formlining, checked and sorted. Sold individually, subject to sale! Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ Storage Address: Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Ulm Registration Court: HRA722943 VAT ID NUMBER: DE279047055
M. No.: 3284 Equipment / Additional information: (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe ...
gebr. Fork kneader AO 170, for 80 kg flour, stainless steel fork, stainless steel boiler, overhauled
Hot foil stamper, available now, fully workshop refurbished, ready to test • ELEVATED MACHINE Machine elevated 415 mm, included elevation of the steps • Step • Centerline for job quick change • Electronic device for sheet travel control • Air conditioning for the electrical cabinet • Gripper bars • Bobst-electronic for managing the machine • Motore principale con variatore di frequenza • Pianale porta-pila con leva per la correzione laterale manuale della pila durante la produzione • NON-STOP FEEDER MANUAL DEVICE • Adjustable lateral blowers with Centerline references • Suction unit with multiple adjusting • Safety system for lowering the pile try • Introduction table covered by antistatic steel stainless plate • Sheet synchronization adjustable during the machine is running for adapting feeder cycle to platin cycle • Feed belt slow-down device Ensures ...
used
Folding machine MBO T 800.1 6-6-4, year of construction 2005, pallet feeder, navigator control, 1. Folding unit 78/6 VN, 6 pockets, upstream and downstream knife shaft, 1 window rebate pocket for 1st or 2nd plant, gluing device HHS prepared, 2. Folding unit 78/6 VN, 6 pockets, upstream and downstream knife shaft, 3. 56/4 RFE folding unit, 4 pockets, sheet recirculation, noise insulation device, compressor, Blobreukrrks Sb Nwkeh 4. MBO SBAP 72 ME, mobile standing arch delivery, year of construction 2005, press rollers at call If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.
Tool Revolver 8-speed Mazak Quick Turn 10N Machine used, good condition from assembly of a MAZAK Quick Turn 10N CNC lathe My. 1985 satted with 8 tool-places Turret 290 mm Space requirement LxWxH: 580 x 460 x 380 mm Price is understood plus VAT freely loaded warehouse Casting - shipping possible after arrangement and assumption of costs Changes / errors in the technical data as well as intermediate sale reserved Seller Offer No. resale 8904
Max. size= 65 x 36 cm, Availability= 062025, 4 bags flat pile feeder with noise insulation devices tape delivery LOT Loaded in truck or container
- Folding stations: 1st folding unit with 6 pockets (parallel folding) - Folding stations: 2nd folding unit with 4 pockets (parallel fold) - Folding stations: 3rd folding unit with 2 pockets (parallel folding) - Max. sheet format: 520 x 840 mm - Min. sheet format: 105 x 148 mm - Max. speed: up to 30,000 sheets/hour (depending on folding pattern and material) - Paper weight: 40 – 250 g/m² - Fold types: single fold, wrap fold, zigzag fold, double parallel fold and much more - Feeder: Flat pile feeder (PBA) - Control: Electronic control with folding program memory - Delivery: Shed delivery (STA) - Optional: Perforating, creasing or cutting units (depending on equipment) - Format adjustment: Manual - Machine dimensions (L x W x H): approx. 2,800 x 1,200 x 1,400 mm - Weight: approx. 1,000 – 1,200 kg Particularities: - Solid construction with high precision - Suitable for ...
Four-sided planing machine Harbs 250 x 150 mm 7 spindles 350 hours of uptime 3 m1 dressing table 8 newly rubberized feed rollers Grooved bed The machine is practically as good as new, ready for operation Changes, errors, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Phone 0041 62 966 18 32 fax 0041 62 966 21 12
Format range: max. 1650 mm, min. 275 mm Equipment: Longitudinal seam, folding bottom, double edge, 4-point gluing, Baumer HHS electronic glue mill with 4 application heads, Disc underglue unit on the left, electronic overhaul folding, Feeder with vacuum, cycle feeder, primary crusher left, motor-driven upper transport stations, kickers, counters, digital position indicators, extended folding station, motorized Threading station, Jagenberg DBS 01 control, fully automatic Format setting Jagset II, 3 x alignment on the press belt, pneumatic, intermittent press belt. Overhaul 2023: cleaned, checked, painted and equipped with new feeder and transport belts
Line for forming cevapcici and cevapi (grinder with mixer, portioning device and belt transporter)
Reference Num.: 3384 Brand: Herzog Heymann Type: M3 + S18 Construction year: 1969 Available: directly Status: In production Location: Deutschland Equipment: - 4 Falztaschen - Flachstapelanleger - Schuppenauslage - Falzwerk Typ S18 mit 4 Taschen
2,500 liter storage tank made of V2A Properties: Volume 2500 L Material V2A (AISI 304) 1.4301 Total height 3000 mm Cylinder height 2000 mm Diameter 1350 mm Number of feet 3 Surface outside 2B=IIIC ground Surface inside 2B=IIIC ground Description Topsoil: Cone base 2 crane eyes CIP ball in the middle Threaded Sockets Sensor for level measurement Tank cylinder: Manhole 440 x 340 Sensor for level measurement CIP ball over manhole 2 x Threaded Socket DN 50 Filler neck DN 80 Subsoil: Cone base Sensor for level measurement forward-drawn residual drain pipe with disc valve DN 100 3 trumpet feet with domes, height adjustable with washers
ILLIG STAL80 Trim Press, age 1988:- Technical data ILLIG STAL 80 : Punching table area max. 1000 x 510 mm Material width max. 800 mm Infeed length 20 - 400 mm Stroke height 200 mm Mold height 272 mm Part height (positive and negative) max. 100 mm Number of strokes (infinitely variable) 25 - 130 /min Trimmed Parts are stacked through the Punch Tool The Skeletal Waste is fed directly into the Grinder ILLIG RS75 Under the Trim Press Grinder, Motor 8.3 kW, age 1995
We offer a Doka Framax 270 and 135 formwork 485.87m² complete with accessories on request. The formwork is completely cleaned, checked and ready for immediate use. Can be used for fair-faced concrete class 2/3 without any problems. Partly recovered with phenolic resin plates 220- 240g film coating, Finnish birch through and through, BFU 100 glued. New value approx. 352.817,00€ - Special net price: 124.853,00€ Pcs. Description 3 Framax Xlife-Element 2.40x2.70m new panel - Doka rental warehouse 5 Framax Xlife-Element 2.40x2.70m Doka rental warehouse 9 Framax Xlife-Element 1.35x2.70m new panel - Doka Rental Warehouse 32 Framax Xlife-Element 1.35x2.70m Doka rental warehouse 9 Framax Xlife-Element 1.35x2.70m Doka rental warehouse 8 Framax Xlife-Uni-Element 0.90x2.70m Doka rental warehouse 8 Framax Xlife-Element 0.90x2.70m Doka rental warehouse 8 Framax Xlife- ...
Hydraulic swivel bending machine - ordering machine (delivery time approx. 10-14 weeks), incl. hydraulic dynamic crowning, touch screen, Pressure regulation of the upper cheek, backgauge (1000mm), goat feet with automatic tool clamping, electr./hydr. Adjustment of the bending cheek -Illustrations similar-
Reference Num.: 3527 Brand: MBO Type: T 500 Construction year: 1995 Available: directly Status: In production Location: Deutschland Equipment: - Format 50 x 70 cm
Max Size 520 x 850 mm Min size 100 x 120 mm 4 Buckles Noise hoods High speed feeder head Digital counter with program 1 Electronic knife Hook on shingle belt delivery Implant machine Very good conditions
Key data: 8 , 600 , 230
High-performance industrial planing machine In good condition, lots of accessories '
weight max. in kg: 2500 kg stroke: 3200 mm fork length: 1000 mm Drive: Gas Side shift: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: 4,25 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
diameter: 255 mm numer of jaw: 3 Stück bore: 82 mm Total height: 130 mm weight: 25 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
SENTE MAKINA HDTF-SI tube forming machine was built in 2022 in Turkey by SENTE MAKINA İNŞ. SAN. VE TIC. LTD. ŞTI. The machine is used in the HVAC industry for the production of precision ventilation ducts, compliant with Eurovent and Smacna standards. Spiro ducts are created from thin sheets of metal with a maximum thickness of 1 mm. The innovative cutting system eliminates the noise and hot sparks typical of traditional saws, guaranteeing smooth edges without the need for additional deburring. The HDTF-SI duct forming machine weighs 2480 kg. The SENTE MAKINA spiral duct machine is fully complete and consists of the following components: – main frame – sheet metal decoiler – forming heads (2 pcs.) – cutting system – stitching roller system for different sheet thicknesses – unloading table (2 pcs.) Technical data of the SENTE MAKINA HDTF-SI spiral tube machine ...
diameter: 250 mm numer of jaw: 4 Stück bore: 70 mm Total height: 160 mm weight: 45 kg - Chuck centrically clamping - jaws individually adjustable The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Used flow pack packaging machine. Manufacturer Chemosvit Strojchem, model BH-07W. New 2017. Capacity 15-250 pcs/min. Available 3 pcs. (2 used and 1 almost unused)
Format range: Max. sheet size opened: 2300 x 1000 mm Min. sheet size opened: 380 x 160 mm Min. sheet size folded: 185 x 130 mm Equipment: Longitudinal seam, folding bottom, double margin, 4 + 6 point gluing, electronic glue mill HHS XTS-E16 cold glue system, BJ. 2023 with 8 application heads, counters, fully automatic format setting, boxflow control with Touchscreen display, extended pressing station, ACE feeder with vacuum, material: Corrugated board with corrugated A, B, C, E, F, FE, EE, BE, BC, solid board: 800–1500 g/m², Maximum mechanical speed: 250 m/min, Bahmüller Retrofits 2025, including fully automatic SMB COR-Flex bundling machine. The machine is in very good condition and can be used by arrangement in production.
We offer Peri Maximo 270 and 330 elements 455.67m² as follows: All elements are cleaned, checked and partly covered with new, original Peri Finply formlining. All elements sealed with zinc phosphate coating corrosion. New value PL 2025 approx. 255105,00€ Special net price 97327,00€ 16 Element MX 15 FPly 330x240 6 Element MX 15 FPly 330x120 New Plate 3 Element MX 15 FPly 330x90 New Plate 2 Element MX 15 FPly 330x90 3 Element MX 15 FPly 330x60 3 MZ-Elem. MXM 15 FPly 330x60 new plate 3 MZ-Elem. MXM 15 FPly 330x60 1 Element MX 15 FPly 330x45 New Plate 3 Element MX 15 FPly 330x30 New Plate 7 Element MX 15 FPly 330x30 3 I-corner MXI 15 FPly 330x50/20 new plate 1 I-corner MXI 15 FPly 330x60 11 Element MX 15 Fply 270x240 New Plate 16 Element MX 15 Fply 270x240 3 Element MX 15 Fply 270x120 New Plate 8 Element MX 15 Fply 270x120 3 Element MX-2 15 FPly 270x60 ...
Key data: 6100 kg, 970 mm
Refurbished Beche KGH 8.0 forge hammer (built in 1980) The hammer was completely overhauled in Germany. The RAM (Schabotte) is from 2013. Control System: 2025 Description of the modernisation works: Hydraulic drive - Completely disassembled in 2024, cleaned, control valves replaced New control system - Siemens S7-1500F PLC control system with touch panel RAM (U-frame) - Contact surface ground - Insert adjusted - New wedge manufactured and hammered in Test run - Hammer was assembled in 2024 and tested in 2025 Technical description: Working capacity: 80 kJ The height max. 600 mm (without swallows) The height min. 200 mm (without dovetails) Bear depth: 810 mm Bear weight: 6100 kg Scabot weight: 105000 kg Total weight: 130700 kg Total height: 7.3 m above floor level Scope of delivery: •Hammer •Documentation The Modernisationword were well ...
- Hand & foot control - integrated ambos - solid substructure Specifications: - Hammer weight: 40 kg - Lifting height: 230 mm - Projection: 240 mm - Cylinder Ø: 140 mm - Motor power: 4 kW - Voltage: 400 V - Dimensions WxHxD: 700 x 1900 x 1200 mm - Weight: approx. 900 kg
maximum number of results exceeded
please refine your search
