fo used for sale

General SKULY011 MakeAlfa Laval TypeFoodec 219 No.5132324-2022 Main Features MaterialStainless steel Motor15 KW Specified Features - Decanter Decantercheck 2-Phase decantercheck Liquid outletcheck Solids outletcheck Motor15kW, 400/690V, 2945 rpm and 7,5kW, 400/690V, 2920rpm With variable speed drivewith frequency controller Max. rotor speed4400 rpm MaterialStainless steel General Year of construction2022 Mounted on framecheck With switchgear(as is) CEcheck Extra information This Maxine has logged a maximum of 1000 hours runningtime. Material of product-contact parts: Stainless steel (sanitary grade) Max. solid-phase density: 3.0 kg/dm³ Min/max. product temperature: 0 °C/90 °C Model: Horizontal sanitary decanter centrifuge Estimated G-force: approx. 3000 G Drum diameter: approx. 280 mm Drum length: approx. 1260 mm StarchBiotechnologyPlastic & polymersAgrochemic ...

Tipper with discharge belt and cross conveyor for the food processing industry, This TVB400/4350 is a tipper built by FoodeQ Engineering, a manufacturer based in Steenbergen, the Netherlands, specialised in vibratory technology and belt conveying for the top segment of the food industry. The unit is constructed in stainless steel and fitted with a blue food-safe discharge belt, combined with a cross belt that carries the product away., The frame is enclosed by a mesh safety guard with an emergency stop button and a control box with up and down buttons for height adjustment. The machine stands on its own frame and is connected by a plug coupling., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/foodeq-tvb400-4350/, Type: Tipper with discharge belt and cross conveyor, Belts: Blue food-safe  ...

Key data: 1 kW, 4800 kg, 9 kW

Technical data/equipment: - Cutting area 4,300 x 4,300 mm - Main saw unit 9 kW - Saw blade Ø 320 mm - Max. saw blade protrusion 77 mm - Scoring saw unit 1.1 kW with pneum. Lowering in the return flow - Scoring saw blade Ø 150 mm - Pro-Lock quick-clamping system for main and scoring saw blade - Feed speed infinitely variable 5-100 m/min, return 130 m/min - Material pusher flow 25 m/min, return flow 80 m/min - Autom. Cutting length detection via laser sensor - Autom. Edging device - Stepless electr. Cutting height adjustment - 4-air cushion tables with support rollers, length 2300 mm - 9 package clamps, opening height 75 mm - Control panel/stop side left - Label printers - Weight approx. 4,800 kg - Electrical connection: 400V, 50Hz, 3~, 28A, 9.0 kW, rec. Fuse 32A - Compressed air connection: min. 8 bar permanent, connection 1/2", air consumption 360 NL - Extraction ...

Uchida Durselen UD-04 four-head paper drill - Lidograf printing machines Menu Home About us Offer Gallery We buy Contact en pl Uchida Durselen UD-04 four-head paper drill Search: Search Technical condition: New Used Categories: Bookbinding machinery Bookletmakers Box production Collators Creasers Die Cutting Machines Folding machines Gluing machines Guillotines Joggers and Lifts Laminators Offset printing machinery Others Packaging machines Paper drills Perfect binders Pile turners Spare parts Stitching machines Uchida Durselen UD-04 four-head paper drill Price: 3250 EUR Download PDF Uchida Durselen UD-04 four-head paper drill The unit is in perfect, like-new condition! This is the latest, currently manufactured model. Made in Japan. The machine features a range of functions designed for ease of operation, including: – infinitely variable drill rotation speed, controlled via an inverte ...

Capacity 230 x 120 mm 5 spindles: Bottom 7,5 kW– Fence / Near 11 kW – Top 7,5 kW – Bottom 5,5 kW Spindle speed 6000 rpm Variable feed speed 6 to 24 m/min, motor 4 kW Straightening table 2000 mm Driven table roller Mechanical/digital read-out Centralised lubrication CE sound/safety hood Interior light Hopperfeed EM 11, upt to 60 cycles/min Workpiece length: 350 to 3000 mm Workpiece width: 20 to 230 mm Workpiece thickness: 12 to 70 mm Air requirement: 8 bar, connection DN8 Extraction requirement: 840 - 9600 m3/h, air speed 30 - 34 m/s Tooling not included

FOOKE ENDURA 83.1 Portal milling machine The FOOKE ENDURA 83.1 is a 5-axis CNC portal milling machine with three linear axes X, Y, Z and two rotary axes A and C. The clamping surface consists of two machine tables of 3,200 mm x 1,000 mm each. An additional, brand-new spindle unit from the manufacturer SPL is included in the scope of delivery. Year of construction 2003 Control SIEMENS SINUMERIK 840D Travel X - 3,500 mm / Y - 2,500 mm / Z - 1,200 mm / A - ± 120° / C - 365° Rapid traverse X/Y/Z axis up to 20 m/min Rotation speed A/C axis up to 15 rpm Equipment: Spindle HSK 63A make SPL, type/DRF-FO-180M-W-16-34 with 34 kW up to 16,000 rpm. Tool changer for 20 tools / diameter up to 100 mm Internal cooling IKZ up to 30 bar Spindle cooling Paper belt filter system KNOLL Hinged belt chip conveyor KNOLL Automatic doors Full enclosure Electronic handwheel Machin ...

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, interchangeable jaws, wedge bar chucks, interchangeable jaws, power chucks -Top jaws: soft top jaws for wedge bar chucks, helical teeth, 1 set -Jaw width: 20 mm -Attachment: Material steel -Dimensions: see photo technical drawing -Transport dimensions: 200/90/H85 mm -Total weight: 2.6 kg

ECM glovebox oven., Volume: 17 litres, Maximum temperature 530°C, Equipped with 4 perforated tablets., - 350x200 mm, This oven is equipped with, - 1st stage vacuum pumping group, - 1 water circuit, - 1 circuit of neutral gas and hydrogenated neutral gas, - 1 accelerated cooling group, - 1 control cabinet, General characteristics, - Maximum oven height: 1700 mm, - Maximum installation width: 2000 mm, - Maximum installation length: 2500 mm, - Worktop height: 1100 mm, -, Heaters, - 6 ceramic heating elements unit power: 1500 W, - Voltage: 380 V Three-phase, -, Gas circuit, N2H2 (6%H2), - supply pressure : 1.5 bar, - Flow rate: 3 m3 / h, N2, - Supply pressure: 1.5 bar, - Flow rate: 30 m3 / h, Water circuit, - Flow rate: 0.5 m3/h, - Pressure 2 to 3 bar, Electricity, - Power supply: 3x400 VAC, - Maximum current: 20 A, Operating temperature (°C): 530 , Internal usable dimensions (mm): Length: ...

Manufacturer: K form press Year: 2018 Condition: Used Stock number: 9622 Maximum blade width: 220 mm Max. sheet thickness: 0.5-0.8 mm The line consists of the following parts: 1) Unwinder 2) Roll forming section with feeding device, sheet metal lubrication and profile length measurement 3) Flying scissors 4) Discharge belt 5) Hydraulic power unit 6) Control cabinet 7) Electrical control cabinet

Key data: 500 mm, 1500 mm

Universal Cylindrical Grinding Machine Manufacturer: Fortuna Type: AFC 1500 A 45 Year of manufacture: unknown Grinding length: 1,500 mm Grinding wheel diameter: 500 mm Largest workpiece pass: 350 mm Largest grinding diameter: 350 mm Largest workpiece weight between tips: approx. 300 kg

Well-preserved and little-used 2-rail gantry crane from the company Vetter. Portal width 4.00 metres Free-standing on 6 supports, column height approx. 5.00 metres Rail length max. 20.00 meters - each consisting of a rail length of 1 x 12.00 meters and 1 x 8.00 meters Specified load capacity 500 kg Crane is offered including chain hoist with electric cable remote control. The operating hours quoted are a generous estimate

FARO Focus Care NEW Bj. 2025 Range 100 m Flash Technology 1x FARO Core Scanner 1x Status Indicator 1x Power Block Battery 1x Power Dock 1x Power Supply 1x 64 GB high-speed SD card and reader 2 Year Warranty (8.2027) FARO Focus S, Focus M, Focus Premium Focus Core & ScanLocalizer Power Block FARO Scene - Annual License AS-Built Suite - Annual License Single User License BASIC Laser Scanning Starter Package: 2 Reference Ball Set FLEXI (12) 2 Set of 6 Reference Ball Feet with Mahgnet Plate 1 carbon tripod with quick release 20 3D measuring point discs

Tailings pile conveyor = conveyor belt AA 40 m x GB 750 mm Conveyor belt center distance 40 m x belt width 750 mm smooth belt E-motor (22 kW ?!) + gearbox Drive drum rubberized single-sided catwalk V-supports (1x with wheels) divisible = transport length approx. 12 m operational condition Sale against bid from location D - Bavaria Code Q20

containermobile shredder/ wood crusher Forus type HB 370 mobile shredder for wood Year of manufacture 1998 + 5,660 operating hours Weight 15.5 t Mercedes diesel engine (270 kW) Roll-off container chassis + transport axle (wheel axle)  Length grinder 1,700 mm + roller Ø 740 mm  Folding hopper Discharge belt Overbelt Magnetic Separator Anti-stress control sensor defective, otherwise good, operational condition Net price ex location 49.900,-- € + VAT Sale from location D - BL Saxony Code No. Q02

TECHNICAL SPECIFICATIONS Manufacturer: Bräuer GmbH Description: Vibratory conveyor trough Type: ZT1500/2700 Year of Make: 1998 Number of unbalance motors: 2 pcs. Drive power: 2 x 1.70 kW (Fabr. Friedrich) Speed: 980 rpm Channel width: 1,500 mm Channel length: 2,700 mm

The machine is in good technical condition; it can be tested by prior arrangement.

approx. 20x lift table for pallets, E shape, Hymo – used - : Price per piece ex location: only 950.-€ (net) incl. loading Manufacturer: Hymo Type: unknown Year of manufacture: unknown Load capacity: max. 1,000kg Useful stroke: should be 80cm 3/ 400 V/ 24 V/ 50 Hz Condition: good, hydraulic oil has been drained Available: immediately Location: Frankenberg camp / Saxony

Offer 26279 Technical data: - Length 3000 mm - Width 1500 mm - Table height 835 mm - max. point load (with adjustable feet) 1500 Kg - Raster engraving 100 x 100 mm - Center distance per 100 mm - Weight approx. 600 kg

Offer 26282 Clamping, straightening, welding table with T-grooves grey cast iron rails Technical data: - Length 3000 mm - Width 1500 mm - Table height 835 mm - max. point load (with adjustable feet) 1500 Kg - Raster engraving 100 x 100 mm - Center distance per 100 mm - Weight approx. 600 kg

Tractor unit Make: FORD, Type: F-MAX 500 LL, Year of manufacture: 2023, Serial number: NMOKCXTP6KPK95753, Registration number: 04/2023, Vehicle identification number: NMOKCXTP6KPK95753, Power 368 KW, Displacement 12,740 cc, 16-speed automatic transmission, Drive type 4x2 with retarder, Diesel engine, Emission standard EURO 6, permissible Gross vehicle weight 18,000 kg, Type LOWLINER, Cab MEGA CAB, Approved Mileage 290,872 KM

pulling force - max.:2,5 t max. ram stroke:1000 mm max. workpiece diameter:40 mm Broaching speed:60 m/min. return speed:20 m/min. total power requirement:24 kW weight of the machine ca.:6 t dimensions of the machine ca.:1,7 x 2,4 x 4,77 m clamping plate:320 mm It is a hydraulic machine.

LPG forklift, gas forklift STILL type RX 70-16TSeries No. 517314G00021 Year of construction 2016Nominal load capacity 1600 kgLifting height 4920 mmFork length 1000 mmCarriage width 980 mmOverall height 2160 mmTotal width 1100 mmTotal length without forks 2200 mmNet weight 3040 kg- Triplex mast with full free lift 1550 mm- Hydraulic sideshift- LPG electric drive- 4-cylinder Volkswagen LPG engine with 30 kW- Hydraulic auxiliary steering- Front working lights- Reversing Warning light (blue)

Electric forklift JUNGHEINRICH type EFG 216Serial No. FN413671 year of construction 2011Load capacity 1600 kgLifting height 4800 mmFork length 1220 mmFork carriage width 980 mmOverall height 2120 mmOperating voltage 48 volt- Triplex mast with full free lift 1550 mm- Hydraulic sideshifter- 2 travel speeds- Battery from year of construction 2015, Type 06 EPZS C750 SC (48 Volt, 750 Ah)- Automatic charger, 48 Volt- 3-wheel solid rubber - Front tires 18 x 7-8, rear 140/55-9- according to the operating hour meter 14725 operating hours read-

Diesel - Forklift, Compact Forklift MORA Type M80CSFabr. No. 20087 Year of construction 2006Nominal load capacity 8 ton. Lifting height 3800 mmFork length 1800 mmFork carriage width 1460 mmOverall height 3030 mmTotal width 1460 mmTotal length without forks 3350 mmWeight 12740 kg- Duplex mast with 1950 mm free lift- 4 cylinders PERKINS diesel engine- Fully enclosed cab with heating- Electro-hydraulic tilting device for the cab- Hydraulic auxiliary steering- 2 front work lights, 1 piece

Delivery without gas bottle. No documents available. Auction-ID: A1-51437-8

Battery empty. Auction-ID: A1-51437-10

Battery from former Still Service 830x730x630mm Voltage at rest measured at 49.8 V Loading onto trucks with forklift trucks. Delivery by freight forwarder possible on request. Auction-ID: A1-51819-1048

- Toyota Forklift / Forklift - Propulsion: Gas / LPG - Engine: Toyota 4P gas engine - Engine number: 4P0004697 - Serial number: 11045 - Operating weight: approx. 2.6 t - Equipped with Kaup lifting device - Lift mast with hydraulic lifting function - Fork carriage with two forks - Pneumatic tyres - Overhead guard - Driver's seat with seat belt - Lighting and exterior mirrors available - Manual control levers for travel and hydraulic functions - Rear-mounted gas cylinder - Classic Toyota instrumentation - Paintwork: Red - Visible signs of wear due to age and service life - Paint chips, scratches and corrosion build-up, especially on the lift mast, forks and bodywork - Forks with clear superficial traces of rust and wear - Engine compartment and aggregates with age-appropriate soiling - Tires optically used - Seat and controls with signs of wear - Year of construction and ...

properties: Used roller conveyor folding element Condition: fully functional with traces of usage Expertly dismantled and packaged Price per pc. Technical data: Dimensions of the flap Total length: 1.180mm Total width incl. feet approx.: 670mm Conveyor width: 460mm Min. height top edge roll: 570mm Axle spacing: 75mm Roll diameter: 50mm In stock: 3 pieces Price per piece Tailor-made solutions for your intralogistics We are your competent contact for roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods! We will be happy to prepare your individual offer or advise you on the conception or assembly questions. Just let us know your needs and local conditions. Take advantage of our many years of experience and our excellent network of professionals. We have already successfully implemented projects for compani ...

Auction-ID: A1-47397-2068

Pneumatic folding bending machine FASTI Type 606 - 11 - 1.0Folding machine for sheet metal folding pre-bendingFor making a fold bendFolding bending machine for thin sheet metal instead of press brakeFabr. No. 9166002 year of construction 1991Working length: 1100 mmMaterial thickness at 45 kg/mm² 1 mmCompressed air requirement 6 bar- pneum. Foot switch roller infeed via threaded toggle screwsSpace requirement L x W x H 1600 x 300 x 1050 mmWeight approx. 250 kggood conditionThe fold is the doubling of the sheet metal in the edge area, i.e. 1x folded around the

Weld edge former, edge former, edge beveling machine TRUMPFFasing of steel plates for weld seam preparationType TKF 103Sheet thickness: 4 - 25 mmBevel length max: 10mmBevel angle: 30Power: 2000 wattsMains connection: 220 volts, 50 Hz- Equipped with guide bracket for 30 bevel angles - Regrindable butt steel for high tool utilization- Equipped for 20 mm sheet metalFor beveling straight and curved edges with a radius of at least 40 mm.For beveling edges on flat and curved workpieces as well as

VAN DEN BERGH FOIL-WIZARD (Hot foil stamping) INCL. ROLL UNWINDER HUNKELER S. No.: 02048020376 Equipment / Additional information: Incl. ROLL UNWINDER HUNKELER RW4-HS 7121 (M. No.: 1509697 // Age: 2004) With transfer station LCM 7084 (M. No.: 659595/2 // Age: 2001)

Kistler 9041A Piezoelectric Force Sensor, Fz 90 kN Force Load Ring Item Condition: Used R12A5K2-5-PD (BOR) You can find more sensors - new and used - in our shop! International shipping costs on request!

VARIOUS TABLES DIFFERENT MODELS OF WHICH CATERING OFFICE FOLDING FOLDING HIGH TABLE Auction-ID: A1-51213-50

Boxes with adhesive foam and stp foam And various ducts sealing materials Auction-ID: A1-50663-1664

Professional ultrasonic water low-fog smoke machine – DMX – RF remote control – smoke hose Specifications: Professional low-fog fog machine for stage, event, theater and show applications Ultrasonic water low-fog system Works with water and smoke fluid Produces dense low-hanging smoke/fog No dry ice or CO₂ required Estimated power: approx. 3,000 W Digital LCD control panel Adjustable smoke output Adjustable ventilation/air distribution DMX512 control 3-pin DMX IN/OUT connection Built-in fans Separate filling points for water and smoke fluid Liquid level indication Large smoke outlet with quick coupling Mobile robust housing Transport handle CE marking Features: Flexible smoke hose Wide discharge nozzle Wireless RF Remote Control Power cable Particularities: Used condition, with signs of wear Machine switched on and checked Machine heats up; L ...

2 pairs of heavy-duty forklift forks Manufacturer: Cascade GmbH Visible Cascade labels include: Part No. 7905456 – 210 × 50 × 1050 Part No. 7901675 – 150 × 50 × 1400 Type: Heavy-duty hook/mounting-type forklift forks Construction: Solid steel Auction-ID: A1-51282-142

Heavy-duty JCB forklift lifting hook attachment, designed to provide a central crane-style lifting point when mounted on suitable forklift forks. Manufacturer: JCB / Bamford Excavators Ltd., Staffordshire, England Type: Forklift lifting hook / lifting attachment Year: 2018 Rated capacity: 4 tonnes Series: J.C.B 500 Series Fork opening / indicated dimension: 88 mm Attachment weight: 27 kg Identification No.: 545/70200 Part No.: 817/16616 Hook: Heavy-duty swivelling lifting hook Mounting: Twin fork pockets with retaining/locking pins Auction-ID: A1-51282-148

Heavy-duty Hyster hydraulic forklift attachment/assembly, apparently comprising a multi-stage hydraulic frame with integrated cylinders, hydraulic hoses and chain mechanisms. The assembly appears consistent with a forklift mast/carriage or specialised hydraulic load-handling attachment, but the exact model and intended Hyster truck application cannot be confirmed from the available photographs. Auction-ID: A1-51282-58

new and unused charger in orig. for batteries with 500-700Ah possible with 400V 16A and Rema 160A plug Built in 2025 and 2026, always unused Delivery by freight forwarder possible on request. Auction-ID: A1-51819-8010

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk - ISO class 2A 2400x150x50 mm - FEM2: Fits any forklift with a load capacity of 1,000-2,500kg Auction-ID: A1-51819-1035

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/EGcwKX9c1gc - Former Linde full-service device - Next service due in 615 operating hours - UVV valid until 06/2027 - Facelift model with tilt angle display (practical for sensitive goods) - Duplex mast with full free lift - 3rd valve, sideshift - 4. Additional valve free for fork adjuster - Integrated scale - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - Safety light at the rear - Safety light at the front - Safety light on the side - Rear camera - Comfort seat with lumbar support and seat heating - LPG gas tank, convertible to gas exchange bottle on request Auction-ID: A1-51874-58

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/lAf4TRhtPno - Former Linde full-service device - UVV valid until 10/2027 - EVO facelift model with colour display and tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd valve, sideshift - Full cabin with heater and windshield wipers - LED front work light - LED work light at the rear - Safety light at the rear - Comfort seat with lumbar support and seat heating Auction-ID: A1-51874-47

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/sIUEFnxb-x4 - Former Linde full-service device - Service valid until 10/2027 - UVV valid until 10/2027 - Battery: 48V 6PzS 750Ah, built 03.02.2021 - EVO facelift model with colour display and tilt angle display (practical for sensitive goods) - Clear-view mast without central hydraulic cylinder - 3rd valve, sideshift - white non-marking tires - LED front work light - LED work light at the rear - Safety light at the rear - Comfort seat with lumbar support and seat heating - with charger Auction-ID: A1-51819-160

REMA 160A Battery Plug 16A plug Delivery by freight forwarder possible on request. Auction-ID: A1-51819-3382

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk - ISO class 2A 2400x150x50 mm - FEM2: Fits any forklift with a load capacity of 1,000-2,500kg Auction-ID: A1-51819-1083