130,254 used machines on RESALE, but how to find them? Machine Search
Transnorm Rising falling Incline with arch and forerun belt conveyor GF 7600-700-600 RA2101 Technical data: Conveyor length (NL): 7600 mm (800 mm forerun + 6000 mm incline + 800 mm arch) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Angle: freely adjustable between 0 and 15° Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor, R27 DT80N4/BMG/TH Electrical data: 50Hz V380-500, kW 0,75 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 7600 Nominal / outside width ...
Transnorm Rising falling Incline with forerun belt conveyor GF 4780+800-700-600 RA2103 Technical data: Conveyor length (NL): 5580 mm (800 mm forerun + 4780 mm incline ) frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): Frequency converter for stepless speed controll Drive: SEW gear motor Electrical data: 50Hz V380-500, kW 0,55 S1 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 5580 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentrala ...
buckles: 2 knives: 0 max. paper size: 33 x 43 cm serial no.: 997 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 1020 mm, 2 mm
Max. bending length: 1020 mm Max. sheet thickness: 2 mm steel Upper beam can be swung out Bending angle adjustable via potentiometer Lifting height can be pre-selected via scale Manual and automatic bending mode possible Weight: approx. 650 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 20 mm -Dimensions: see photo technical drawing -Overall dimensions: 75/80/H50 mm -Total weight: 1.4 kg
Folding machine GUK SAF 35/2 Year of manufacture 1981 2 cassettes Art,No. PS5983 Price 850€ FCA Germany
Four-sided planer Weinig Unimat 23 EL Working width 230mm Working height 160mm Head Arrangement: Bottom 5.5kw 4kw rights Left 5.5kw 4kw rights Mountain 11kw Bottom 5.5kw Mount 7.5kw Bottom 7.5kw Feed speed adjustable on variator 6-36m/min Feed driven by cardan shaft Driven rollers in the table Pneumatic clamps CE Certified Year of Build 2003 Net price
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 18 mm -Dimensions: see photo technical drawing -Overall dimensions: 60/73/H48 mm -Total weight: 1 kg
Sell a GUK folding machine Cartonac 2000-2 on behalf of a customer More information on request.
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 18 mm -Dimensions: see photo technical drawing -Overall dimensions: 60/73/H47 mm -Total weight: 1 kg
Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: 4-piece hard rotary jaw set -Jaw width: 22 mm -Dimensions: see photo technical drawing -Overall dimensions: 90/90/H55 mm -Total weight: 2.1 kg
CATALOG NO. 7221 TECHNICAL DATA - min / max width of the workpiece 45 / 150mm - min / max height of the workpiece 15 / 50mm 3 spindles: 1) horizontal lower 11kW 2) horizontal upper 22kW (7000 rpm) 3) horizontal lower 5.5kW spindle diameter 40mm - spindle 1 and 3 manually adjustable up/down, right/left - 2 spindle, manually adjustable right/left - 2 spindle, electrically adjustable up/down - spindle 2 and 3 are equipped with brakes in advance: - 3 introducing, pulling, metal toothed rollers - 1 double output, pulling, rubber roller from down: - pressure on insertion - grooved top - pulling roller, metal, smooth - electric setting of planing thickness - smooth adjustment of feed speed 6-24m/min - 3kW feed motor - feed on cardan shafts - length of the introductory tabletop 1970mm - automatic tabletop lubrication system - diameter of the exhaust port 1x150mm, 2x ...
CATALOG NO. 7219 TECHNICAL DATA - max width of the processed element 200mm - max height of the processed element 150mm number of spindles 4: 1) horizontal bottom 200mm 5.5kW 2) vertical right 150mm 4kW 3) vertical left 150mm 4kW 4) horizontal top 200mm 5.5kW - all heads adjustable up/down, right left - spindle diameter 40mm - spindle speed 6000 rpm in advance: - 6 pulling, toothed input rollers, including 2 double ones - 1 pulling, rubber, double output roller from down: - toothed, pulling and turning roller in the lower tabletop - side pressure 3 pcs - discharging, pulling roller, metal, smooth - all rollers pressed pneumatically - length of the introductory tabletop 2130mm - top/bottom adjustable top - central lubrication - electric setting of planing thickness - 1.1kW lifting motor - smooth regulation of feed speed - 3kW feed motor - feed on cardan shafts ...
CATALOG NO. 7220 TECHNICAL DATA - min – max width of the processed element 20 – 230mm - min – max height of the processed element 8 – 160mm 7 spindles: 1) horizontal bottom 230mm 5.5kW 2) vertical right 160mm 5.5kW 3) vertical left 160mm 5.5kW 4) vertical right 160mm 5.5kW 5) vertical left 160mm 5.5kW 6) horizontal top 230mm 7.5kW 7) horizontal bottom 230mm 7.5kW - all spindles adjustable up/down, right/left - spindle diameter 40mm - spindle speed 6000 rpm in advance: - 10 pulling, toothed and metal input rollers, including 2 double rollers - 3 side pressures from down: - pressure from the side at the insertion - input shaft, toothed, pulling, turning in the lower tabletop - 2 pressure points from the side - grooved top - drawing roller, metal, grooved - drawing roller, metal, smooth - pneumatically adjustable rollers - length of the introductory tab ...
Gas bottle not included Auction-ID: A1-41957-8
CATALOG NO. 7134 TECHNICAL DATA - max planing width 500mm - max planing height 190mm in advance: - pawls - sequential pulling shaft - 2 rows of clamps - pulling, sequential input shaft - 500mm planing shaft, 4-knife, 7.5kW engine - clamps - pulling, smooth, output shaft - pressure on the lead from down: - adjustable insertion table + pressure - slip shaft, smooth - 500mm planing shaft, 4-knife, 5.5kW engine - 2 slip shafts, smooth - side pressure in the back: - side spindles 1) vertical right 140mm 4kW 2) vertical left 140mm 4kW - spindle diameter 40mm - spindles adjustable up/down, right/left - smooth adjustment of feed speed 8-30m/min - electric tabletop lifting - diameters of the exhaust pipe: 2x145mm, 2x160mm - dimensions length/width/height 2050x1700x1700mm - weight 2100 kg ADVANTAGES – ideal for flooring processing – electric tabletop lifting ...
CATALOG NO. 7186 TECHNICAL DATA - max planing width 510mm - max planing height on both sides 170mm - maximum planing height on four sides 100mm in advance: - pulling, toothed input shaft - pawls - pulling shaft, toothed - pressure - planing shaft 510mm, 4-knife (2 knives installed) 4kW - pulling, smooth, output shaft from down: - guide strip - sliding roller – adjustable top with an up/down roller - planing shaft 510mm, 2-knife 4kW - 2 smooth, sliding, adjustable shafts in the back: - 2 side spindles + pressure - 1) vertical right 100mm 2.35kW - 2) vertical left 100mm 2.35kW - spindle diameter 35mm - spindles adjustable up/down, right/left - manual setting of planing thickness - 4 types of feed speeds - feed motor 1.5kW - dimensions length/width/height 1940x1320x1140mm - weight 1330kg ADVANTAGES – ideal for processing logs, floor tiles, etc. – pro ...
Extendable forks 1185mm. Charger included Auction-ID: A1-41957-29
diameter: 315 mm weight: 36 kg : ID 105 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
K240/12 nabertherm . Foundry machines furnace, ovens Nabertherm Kippofen 600kg Aluminium Nabertherm Kippofen 600kg Aluminium Balzer Kippofen 600kg Aluminium Balzer Schöpfofen 300kg Aluminium Fulmina Wannenkippofen 20 to Zamak/Zink Reißaus Durchlaufmischer 4-8 to Furansand AXA Fräsmaschine 2300x1190x600 Silo Ø 2500x5000 Sand
Technical data for the footplate: Shelving system: Nedcon Type: NS Year of construction: 2024 -New- IMMEDIATELY AVAILABLE The scope of delivery includes: 01x Foot flap, new Material colour: RAL 5019 Capri blue Material thickness: approx. 3.50 mm suitable for frame profile width: 100 mm Total width: approx. 200 mm Total depth: approx. 93 mm Total height: approx. 43 mm Drill hole spacing: approx. 145 mm Drill hole Ø : approx. 15 mm Weight/piece: approx. 0.663 kg General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.
Transport carriage IVG, built in 2020, craneable, load capacity 3to, unused. Transport carriage IVG, YOC 2020, unused, load capacity 3to, for the transport of turbine shafts or other objects, craneable, with reinforced attachment points for slipping or for safe transport with a forklift. Multiple presents. Dimensions approx. 2,400x750x500mm Dimensions approx. 2,400x750x500mm Dimensions approx. 2,000x750x500mm
Key data: 6 , 230 mm, 150 mm
I am selling the new four-way planer LEADERMAC COMPACT 623C (2M), New machine built in 2024. Exhibition machine ! Configuration 6 Spindle: Bottom 5.5 kW / 7.5 HP Right 5.5 kW / 7.5 HP Left 5.5 kW / 7.5 HP Top 7.5 kW / 10.0 HP Right milling machine 11 kW / 15.0 HP / adjustable speed Left tiller 11 kW / 15.0 HP / adjustable speed Feed speed adjustable 6-36 m/min. Feed motor 3.0 kW / 5.5 HP + inverter Element max. width 25-230mm Element max. height 10-150mm All 6 spindles 6000 rpm. / the right and left milling machine with adjustable speed Electronic programming for working height Material proofs for short elements. 3-zone pneumatic material pressure system for feed Total weight 4500kg. Combined power 51.18 kW / 68.25 HP Fully operational. Available soon. Exhibition machine, completely NEW ! Tools, planer heads, milling heads and all accessories included.
Key data: 4 , 300 mm, 200 mm
I am selling the new four-way planer LEADERMAC COMPACT 430, New machine built in 2024. Exhibition machine ! Konfigurazion 4 Spindle: Bottom 7.5 kW / 10.0 HP Right 7.5 kW / 10.0 HP Left 7.5 kW / 10.0 HP Top 7.5 kW / 10.0 HP Feed rate adjustable 6-24 m/min. Feed motor 7.5 kW / 10.0 HP + inverter Element max. width 15-300mm Element max. height 10-200mm All 6 spindles 6000 rpm. Schneider Touch-Screen EASYSET Electronic programming for working width, working height and contact height Material proofs for short elements. 3-zone pneumatic material pressure system for feed Total weight 4000kg. Combined power 39 kW / 52 HP Fully operational. Available soon. Exhibition machine, completely NEW ! Incl. CE and complete documentation !
Technical data for the footplate: Shelving system: Nedcon Type: NS Year of construction: 2024 -New- IMMEDIATELY AVAILABLE The scope of delivery includes: 01x Foot flap, new Material colour: RAL 5019 Capri blue Material thickness: approx. 5.00 mm suitable for frame profile width: 120 mm Total width: approx. 220 mm Total depth: approx. 94 mm Total height: approx. 43 mm Drill hole spacing: approx. 180 mm Borehole Ø : approx. 20 mm Weight/piece: approx. 1,020 kg General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.
Universal formwork Paschal Raster Universal formwork for foundations, walls, columns, beams, shafts, curves (polygons), landscaping construction, prefabricated elements. Versatile and flexible for use as manual and large-area formwork. Thanks to the modular principle, systemic formwork is very possible, even with complicated floor plans. The flat steel frames guarantee the robustness and durability of the formwork. Compatible with all PASCHAL systems. Connecting bolts as a universal fastener for all elements and accessories.
Folding system steel TH 82-6-4-4; is cleaned and inspected before delivery; consisting of pallet feeder PFH 82; 1.Station BUH 82 6 bags; 2.Station BUH 66 4 bags; 3.Station TD 56 4 bags; Standing bow delivery SB 66 MP. D YOC 2001; Shed display SAK 94 FH; Rollers as good as new. Folding machine steel TH 82-6-4-4; will be cleaned and checked before delivery; flat pile pallet feeder PFH 82; first station BUH 82 with six pockets; secound station BUH 66 with four pockets; third station TD 56 with four pockets; vertical stacker SB 66 MP. D year 2001; stream delivery SAK 94 FH; rollers like new.
maximum number of results exceeded
please refine your search
20 € 
