fo 3015 used for sale

Multipli with pheumatic bow feeder , compresser, double sheet control , 2 pockets

The machine is complete Light or low refurbishment required

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo techn. drawing -Total dimensions: 65/80/H45 mm -Total weight: 1.2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 22 mm -Dimensions: see photo techn. drawing -Total dimensions: 80/90/H55 mm -Total weight: 1.8 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo techn. drawing -Total dimensions: 70/80/H50 mm -Total weight: 1.5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo techn. drawing -Total dimensions: 70/80/H53 mm -Total weight: 1.6 kg

Tripod ( column foot ) new, galvanized. Tripod new, galvanized 22,90€ Stück / piece Forkhead/fork head 6,80€ Stück / piece all prices excl. VAT and transport Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm., Tel. 07305/9562350, Fax. 07305/9562352 , VAT ID NO.: DE279047055 Office/ warehouse address:Birkenstraße 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Mobile: 0049 176 70044689 Mr. Becker Register court Ulm: HRA722943

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Turning jaw set, 4-piece, hard -Jaw width: 24 mm -Dimensions: see photo techn. drawing -Dimensions: 90/96/H68 mm -Total weight: 2.7 kg

Four-side planer with 4 planing heads •Powerful with 4 motors Hsvwvkytm Voltage 400 V / 3 / 50 Hz Motor power 17,1 kW finished workpiece width 180 mm min. finished workpiece width 25 mm finished workpiece thickness 105 mm min. finished workpiece thickness 10 mm min. length of the workpiece - for single feed 350 mm - at group feed 250 mm Number of working spindles 4 Spindle speed 6000 min-1 Spindle diameter 40 mm Cutterhead diameter 120 mm Length of horizontal spindles 190 mm Length of vertical spindles 120 mm Feed speed 6; 12 m/min Diameter of feed rollers 120 mm Length of feed table 1700 mm Distance of the feed table from the floor 920 mm Quick adjustment of the feed table and ruler 10 mm Weight 1000 kg

Auslaugungsvorrichtung. Sehr guter Zustand. Sprechen Sie mich gerne an.

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1120mm -Cross section: 140 x 60 mm -Recording: see photos -Dimensions each: 1220/140/H620 mm -Total weight: 210 kg

sheet width: 2000 mm plate thickness: 2 mm distance between columns: 2080 mm total power requirement: 2,2 kW weight of the machine ca.: 2,8 t dimensions of the machine ca.: 3,0 x 1,2 x 1,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipping device, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 935mm -Cross section: 140 x 50 mm -Recording: see photos -Dimensions each: 1040/140/H660 mm -Total weight: 156 kg

- Pallet feeder FP 95 incl. VACULIFT III - MC Control - 1. Station 4 Niro fold buckles - Perforating, creasing and cutting deivce parallel fold - KL- und SUPER KTL-Version with 2 knifes - Vertical Stacker SBAP 46-ME, Bj. 2016 - Stream delivery ASP 66-2ME, Bj.2012

Nominal mass of falling parts, taking into account the mass of the upper stamp (500 kg.), Kg. 5000 Actual mass of falling parts without top stamp, kg. 5030 Effective kinetic energy of falling parts at full successive impacts, kgc m 12500 The greatest working stroke of a woman, mm. 1300 The smallest height of dies without shanks, mm. 400 Distance between guides in the light, mm. 800 The length of the woman in the direction perpendicular to the front of the hammer, mm. 1180 Steam (air) pressure before entering the cylinder, atm. 7-9 Nominal mass of the upper die, kg 500 The largest mass of the upper die, kg. 1500 The highest permissible steam temperature, ⁰C 200 weight 145-148ton, weight of anvil block 75+22 ton.

1 HORST KIND label cut and fold machine type UNI 2000 E year 1988

1 HORST KIND label cut and fold machine type ECO 2015, year 2014

Button machine, knee lever press, crimping machine, eyelet machine, workshop press with foot pedal -Knee lever press: with foot pedal, on solid base frame -Table size: 260 x 180 mm bore Ø 60 mm -Spindle holder: Ø 32 mm -Intermediate dimension: 135 mm -Dimensions: 460/400/H1450mm -Weight: 113 kg

crane fork, loading fork, load fork, pallet fork, pallet crane fork -Crane fork: with manual balancing -Load capacity: kg -Tine length: 730 mm -manual weight compensation -Fork: adjustable up to 1040 mm -Useful height: adjustable 1170 to 1960 mm -Dimensions: 1060/865/H1130 mm -Own weight: 108 kg

Temperature controller, temperature control device, temperature control device, modular temperature control device, tool heater -Manufacturer: PSG, temperature control device for tool heating up to 8 control zones -Type: RSD II 8 -P max: 28 kW -Transport dimensions: 490/430/H460 mm -Weight: 30 kg

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: DETA, charger type WE 24/64 S -Input voltage: 220 V 50 Hz -Power: 24 V/64 A -Dimensions: 455/380/H810 mm -Weight: 51 kg

format 46 x 66 cm Year of construction 2003 Flat stack feeder Vacustar 1st station: 4 folded sheets downstream knife shaft Noise insulation hood Counting device MS-Control without display Delivery date: immediately from stock Price on request. We deliver and install worldwide!

1 MÜLLER label cut and fold machine type LCFR2, year 2017

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: Still, charger type E 24/50 SL -Input voltage: 220 V 50 Hz -Power: 24 V/50 A -Dimensions: 555/430/H750 mm -Weight: 50 kg

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Charger for forklifts: Miditron Type D 400G 48/100 PWF-PMT -Input voltage: 400 V 50 Hz -Power: 48 V/100 A -Dimensions: 555/530/H690 mm -Weight: 112 kg

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: Hagen Battery, Charger Belatron Type E220 G24/50 B-FB -Input voltage: 220 V 50 Hz -Power: 25.2 V/50 A -Dimensions: 540/330/H420 mm -Weight: 40 kg

Blanco food serving with glass structure Blanco food dispenser refrigerated display case 40 mm granite table top Bianco Berrocal Front fairing beech fated Tray/disc chute Power supply: 230 V with lighting Metrics: Width: 254 cm Depth: 80 cm Depth with plate slide: 110 cm Height: 190 cm Information on cooling: Without compressor unit / refrigeration unit Centrally cooled for connection to external refrigeration system Last exam 09.2022 More food editions - new and used - can be found in our shop! International shipping costs on request!

Folding machine Make MBO Model T49-4 Year 1984 Maximum size 490 x 850 mm Configuration Feeder Flatpile feeder 1st station 4 plate buckles 490 mm Delivery belt delivery Details with batch counter, noise hoods, vacuum pump Available direct

Forklift battery charger, industrial charger, Forklift battery charger, industrial charger, Si rectifier -Manufacturer: Jungheinrich, charger type DLW 12/20 SN -Input voltage: 220 V 50 Hz -Power: 12 V/20 A -Dimensions: 410/200/H340 mm -Weight: 12 kg

lifting mast, stacker mast, forklift mast, lifting frame, rear loader -Manufacturer: Clark, forklift mast from forklift type C500-Y80 -Load capacity: approx. 4000 kg -Lifting height: mm -Recording/Dimensions: see photos / technical drawing -Dimensions: 1245/420/H2350 mm -Weight: 1120 kg

fork head new, galvanized 6,80€ piece Forkhead new, galvanized 6,80€/ piece Support leg / tripod / tripod newly galvanized. 24,00€/ piece all prices excl. VAT and transport Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Tel. 07305/9562350, Fax. 07305/9562352 Mobile: 0049 176 70044689 Mr. Becker Office/ warehouse address: Birkenstrasse 15 89185 Humlangen- Hüttisheim E-mail: sfsystemst-online.de Register court Ulm: HRA722943 VAT ID NO.: DE279047055

Fork carrier, forklift blade, pallet fork, forklift fork, for wheel loader, forklift, telehandler, stacker, tractor -Fork carriage: without forks -Load capacity: 1500 kg -Beam width: 2500 mm -Forks: available in a wide selection -Total dimensions: 2500/130/H400 mm -Weight: 370 kg

Capacity :10 tons, Weight of falling part,nominal mass of drop parts without upper instr.:9 tons, Effective working kinetic energy after blow :25000 kg mtr., Max. working ram stroke :1400 mm, Max no of blows : 30/min , Distance between slides : 1000 mm, Shut height : 775 mm , Ram size front to back :1200 mm, Bolster size front to back :1200 mm, Air pressure : 7-9 MPA , Height of instruments : 450 min., Die-holder front to back dimensions: 1400 mm, Height above floor level: 7270 mm, Hammer dimensions : 4400x10420x2700 mm, Weight (less anvil block): 73.5 ton, Weight of anvil block : 203.8 tons.

Horizon Cross Folder Model AFC-504AKT Machine is in stock and is immediately available

Intermediate plate for pillar jib crane, crane foundation plate, indoor crane, workstation crane, crane foundation plate -Pillar jib crane: intermediate plate/base plate, outside: Ø 1050 mm -Thickness: 40 mm -Bolt circle inside: Ø 530 mm / M thread -Outer bolt circle: Ø 1410 -Own weight: 576 kg

four-jaw chuck, 4-jaw chuck -Four-jaw chuck: chuck size Ø 310 mm -Passage: Ø 98 mm -Bolt circle: Ø 290 mm -Jaw width: 26 mm / interchangeable jaws not included -Dimensions: Ø 310 x 90 mm -Weight: 24 kg

MAPPACK Conpax Servo Wrap Packaging Machine Foil Packaging

four-jaw chuck, 4-jaw chuck -Four-jaw chuck: chuck size Ø 190 mm -Passage: Ø 57 mm -Bolt circle: Ø 170 mm / M10 -Jaw width: 20 mm / interchangeable jaws not included -Dimensions: Ø 190 x 70 mm -Weight: 8.5 kg

-Exhibition Machine- State-of-the-art fully hydraulic folding machine. Extensive standard equipment: · hydraulic drive for upper and bending beam · Pointed rail 45 degrees · Rails in upper, lower and bending beam · Oil filling · Control panel with: Digital display of bending angle infinitely variable specification of the bending angle Push button for controlling the upper and bending beam Switch for automatic operation · Control: PLC - Siemens · Foot switch for manual and automatic operation · CE certification · Safety stop at approx. 25 mm upper beam height Hydraulic dynamic crowning Motorized backgauge (1000 mm) Electr./hydr. adjustment of the bending wing, Touch screen: Input for backgauge values and Bending angle of the folding machine Pressure regulation of the upper beam Automatic tool clamping Round bending function with bending Half-shells 180 ...

FORMING, GLUING AND BREADING LINE, KOPPENS + MULTIFORCE CONTRACT LIMITED Technical description: Forming machine Koppens, type: VM 400-HS Dimensions: 2100 x 800 x 2080 mm Gluing machine Koppens, type: ER 400 Dimensions: 1435 x 815 x 1620 mm Breading machine Koppens, type: PR 400 Dimensions: 2470 x 670 x 2050 mm Gluing machine Mutliforce Contract Limited Dimensions: 1100 x 600 x 1670 mm

Used aseptic filler made by FBR ELPO, new 1997. Machine comes with steriliser made by CFT Rossi Catelli, new 2000.

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Charger: for forklifts, type D 24/200 MULTI WF200 -Input voltage: 400 V 50 Hz -Power: 24 V/200 A -Dimensions: 555/520/H890 mm -Weight: 119 kg

Folding machine Make MBO Model T45-4X Year 1990 ? Maximum size 460 x 650 mm Feeder Flatpile feeder 1st station 4 plate buckles 450 mm 2nd station 1 knife Delivery belt delivery Details with MCC2 batch counter, noise hoods, vacuum pump Available direct

MARTIN T90 Year of construction 1996 Nominal current: 64 A max. planing width: 260 mm max. planing height: 160 mm 5 spindles: 4x Tersa planer head + 1x universal spindle Spindle arrangement: Bottom – Right – Left – Top – Universal Spindle 1 – 4: 4 knife shaft – Tersa Use of profile knives for chamfers and radii possible (spindle R + L + O) Spindle 5: Universal 40 mm spindle (max. tool diameter: 220 mm) swivel (- 45° / + 90°) Bottom: 5.5 kW Left+Right: 5.5 kW Top: 5.5 kW Universal: 7.5 kW Feed speed: 4 – 25 m/min. (infinitely variable) electronic positioning control (storage of up to 100 pairs of dimensions possible) Engine brake Central lubrication Extras: Universal spindle Table extension at the spout Hold-down device for joining shaft right incl. 8 new rubber pull-out rollers Suction connection: 250 + 160 mm Dimensions: L: 524.5 cm W: ...

MBO T 460 folding machine; good condition; cleaned and tested; new folding rollers; new warehouses; new straps; 4 folding pockets; shed display; .max. Format 46x66cm;, min.15x17cm; MS control; knife shafts; Flat stack feeder. Folding machine MBO T 460; good condition; cleaned and checked; new rollers; new bearings; new belts; four pockets; stream delivery; max.size 46x66cm, min.15x17cm; MS counter; slitter shaft rollers; Folding Pile Feeder.

Four jaw chuck, four jaw lathe chuck, 4 jaw chuck -Manufacturer: AROWA, four-jaw chuck No. 4 chuck size Ø 138 mm -Passage: Ø 37 mm -Bolt circle: Ø 120 mm -Dimensions: Ø197 x 110 mm -Weight: 11 kg

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1400 mm -Cross-section: 125 x 45 mm -Recording: see photos -Transport dimensions: 1520/560/H125 mm -Total weight: 148 kg

BÖHL JUNIOR S-450 VA fully automatic wrapping machine for all types of long goods Product Dimensions • Width 80 – 220 mm • Height 50 – 100 mm • Length approx. 2,000 mm to 6,000 mm • Weight approx. 30 KG • Maximum cross-sectional diagonal 311 mm Packaging materials • PE stretch film thickness approx. 7 – 50 my (recommended 23 my) • Roll diameter 220 mm • Roll width 250 mm • Sleeve diameter 76 mm Specifications • Winding ring D = 450 mm inner diameter • Speed max. 20 m/min. (frequency controlled) • PLC control Siemens S7-200 with touch panel • Control voltage 24 V DC • Connection voltage 3 x 400 V – 50 Hz • Power consumption approx. 2 KW • Back-up fuse 25 A • Noise level 79 db • Operating pressure 6 bar • Air consumption approx. 20 standard litres per cycle Technology • Automatic smooth-cut cut-off unit for th ...

Forklift bucket, hydraulic forklift bucket, light material bucket, tipping bucket, container tipper, forklift tines, forklift forks, fork tines -Forklift tines: 2 pieces/1 pair -Length: 1800 mm -Cross-section: 200 x 60 mm -Recording: see photos -Transport dimensions: 2060/1080/H200 mm -Total weight: 487 kg

Four-sided planer Leadermac 823 Working width 230mm Working height 160mm Head system Bottom 11kw Right 7.5kw Left 7.5kw Top 11kw Top 11kw Bottom 11kw Rights 15kw Left 15kw Upper heads with supports Feed regulated on the wave Feed motor 7.5kw Rollers pulling in the table material Pneumatic upper pulling rollers Adjustment of heads by controller