fo 3015 used for sale

CNC plasma cutting system working range: 1500 x 3000mm OTC Superplasma 12000 Cutting up to 20mm quality cutting New control ProDNC from Micompan data transfer via USB; ready to use

Used rolls press / dough divider FORTUNA, type: A3-áberholt-- for 30 dough pieces - 3 active plate - completely reconditioned and newly painted with (original) weight range: 32-70 g Dough weight: maximum 960-2,100 g Price: EUR 3.900,- Transport: EUR 150- Inspection and test run are possible by arrangement like.

; ready for use

Foellmer ME 45/EX; good condition; Working width 450mm; short and long investment table; Tool for groove and perforate; Foot switch; Zaehler.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Manufacturer: Lieder (ROBOT FOOD TECHNOLOGIES) Type: TA54V-2 4 Lines Size of tubes: Ø 75 mm Filling volume: Filler 1: 25 - 50 ml Filler 2: 100 - 250 ml (you can make two different products into one cup) Capacity: up to 10.000 cups/h Cup disinfection: by H2O2 Including: - carton erector and packer 4x5 - Clean air filter (Laminar flow) - CIP installation - SIEMENS S5 control

diameter 200mm, little used, dusted, good condition.4 Bolts with bolt spacing approx. 94mm, Hole circle diameter of the bolts approx. 133mm, the largest diameter of the short cone approx. 106mm, Drawbar in the middle. All information to the best of our knowledge but without any information. Special price

Ford cardboard stitching machine; good condition; Long sleeve; suitable for flat wire; 380 volts; Exit via foot switch.; Ready. At this point we allow ourselves to note that all offered machines are in our unrestricted possession or access and are present in our warehouse. Visits and demonstrations are possible on request in our premises. We would also be pleased to inform you about our complete stock, as only part of our portfolio is presented here.

Qty. 1 Second-hand power plant including boiler (BFB – boiler: bubbling fluidized bed) Mfc.: Foster Wheeler, Siemens, Raumaster, YIT Corporation, Honeywell, Built: 2001, 2002, 2006, 2009 Revision: 2009 Insulation removed in 2018 BFB Boiler – 88 MW Steam turbine – 22.5 MW Main Steam Cycle BFB boiler K7 – Some parts removed and storaged indoor at the paper mill area – Boiler is made electrically safe (cables cut) – Dry conservation ongoing since 2014 (tubes filled with nitrogen, dry air circulation) – Steam Turbine VP4 (in storage) Generator (in storage) Power Plant – Function Primary function is to produce steam for the Paper Mill reliable and economically Secondary functions: Burning of the Paper Mills (PM) waste wood Incineration of sludge from the PM: WWTP Production of flue gas to the PCC (precipitated calcium carbonate) plant Electricity product ...

continuous grilling line all stainless steel bottom contact grilling + hot air steam injection belt width 1.000 mm nett length 4.750 mm electrically heated 276 kW underplate max. 260°C air temperature max. 280°C belt washing system adjustable speed dimensions (l x w x h) : ± 6.600 x 1.500 x 2.300 mm

Food Pack machinery / flow pack machine. The machine is designed for wrapping various products for food industry products or other non-food products in film. Manufacturer: Food Pack Machinery SRL Italy Type: Leonardo 700 Year of production: 2010 Control from the color touch screen panel Max film width 700 mm Dimensions: Length 6160 mm, Width 1390 mm, Height 1860 mm Weight: 600 kg Electricity: 380 v., 50 Hz, 6.4 kW Without need: 6 bar Packaging film: Polyethylene The width of the machine's packaging tunnel can be changed according to the width of the wrapper (film) with a handwheel and a digital display. The height adjustment works the same way. The machine is in good condition and clean.

CNC plasma cutting system Work area: 1500 x 3000 mm OTC Super plasma 12000 Cut quality cutting up to 20 mm New control ProDNC from Micompan Data transfer via USB

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: Rose Forgrove (APV) Type: RF 555 Flowpak YOM: 1988 output: up to 200 pieces/min. electrical: 380 V; 3 ph; 50 Hz dimensions: 4000 x 1250 x 1700 (lxwxh) Format range: length 50 - 275mm width max. 175 mm high max. 50mm discharge length: 315 mm Roll width: 450 mm Max. Rollen - ?: 330 mm (Außen), 76 mm (Innen) different: Infeed ca. 2000mm We offer this machine in as-is where-is condition excluded Vat, ex Warehouse Hess. Lichtenau, unpacked

Technical data: -Drilling capacity in steel ST 60 28 mm -Drilling capacity in steel ST 60 32 mm -Spindle mount MT 3 -Right - left rotation -Drilling spindle stroke 150 mm -Spindle speed continuously variable 80-1170 U/min -2 feed 0,1 / 0,2 mm / Rev -Throat depth 290 mm -max distance table - spindle 780 mm -Table with 2 T-slots 480 x 400 mm -Height-adjustable via rack and pinion with hand crank -Drive: 400 V / 0.9 / 1,3 kW -Space requirement approx. B 600 x H 2100 X 900 mm -Weight approx. 420 kg -with:-coolant system -Keyless drill Chuck 1-13 - lighting

Stainless horizontal fish slicer with adjustable thickness, adjustable stroke and speed.

We offer: Doka / Form-on smartPROPplus 20 550 new a 62.60€ / piece net Doka stacking rack 1.55 x 0.85m new 130.00€ ( 30 pcs in frame) Heavy load supports , galvanized DIN 1065 , at each extension length 20kn load -Load capacity min. 20 kN at each extension length (according to general building inspection approval Z-8.311-946) -Preservation of the value of the supports over many years thanks to high-quality production and galvanizing -fast and safe release of the clamped support due to optimized thread pitch -safe working thanks to squeezing and fail-to-back protection - They offer on 1 construction support ! If you have any questions, call Mr. Becker on 0176-700 44689 the sale and sale of scaffolding/formwork systems and construction machinery; Formwork restoration on fair terms. Company SFS Meisterbetrieb Andreas Becker e. Kfm., Tel. [07305-9562350],  ...

Forte cold circular sawing machine with roll feed. Outfeed table and bundle magazine doesn't exist.

Description Brand LOGIUDICE FORNI Model Vortex - LFRNPE 6080 ID R185 Year of manufacture 2009 Location Oradea (RO) Electric rack oven Logiudice Forni Vortex - LFRNPE 6080 manufactured in 2009. Number of trays: 18, tray size: 60 x 90 cm, tray spacing: 94 mm, total baking surface: 9,7 m2, external size: (L x W x H): 204+30 x 135 x 230+38 cm, weight: 1620 kg, thermic capacity: 60 000 Kcal, 240 000 Btu/h, 70 Kw. Electric absoption: 52 Kw (resistor) + 2,5 Kw (motor). ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 ) Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prio ...

P119 - used approx. 28.8 m³ / 28,800 litres GF-UP tank / plastic tank, double-walled, flat bottom tank, in good condition. technical details: capacity: approx. 28.8 m³ / 28,800 litres material: double-walled GF-UP tank manufacturer: Formoplast dimensions: Ø approx. 3.0 m x total height approx. 4.5 m certification mark: PA-VI 312.002 (DIBT examination report not available) specific weight: 1.4 kg / L Used storage tank in good condition. The hull will be newly painted in dark green. Double-walled flat bottom tank, aboveground storage tank with various connections such as ventilation, feed, etc., lid on the roof. According to the age, traces of use are present. For media with a specific weight of up to 1.4 kg/L, the tank formerly contained iron(II) chloride. This container can be used as a storage tank for liquid feed, water, whey and many different media. Pric ...

continuous grilling line all stainless steel adjustable product height with lower and upper belt : bottom and top grilling independent temperature control below and above net length 1.800 mm belt width 600 mm electrically heated ± 90 kW belt washing system above and below adjustable temperature range per heating plate (6 pieces) capacity up to 250 kg/h depending on the product adjustable speed dimensions (l x b x h): ± 3.000 x 1.650 x 2.400 mm

continuous grilling line grilling surface (w x l) : 600 x 7.500 mm bottom contact grilling + hot air (with flip-over) grilling time : 1 minute to 60 minutes belt width ± 600 mm electrically heated power : 2x200 A, 2x140kW, 3 x 400V, 50 Hz belt washing system adjustable speed overall dimensions (l x w x h) : ± 10.315 x 1.230 x 2.338 mm weight : ± 4.500kg

The FORNI INDUSTRIALI FIBEX COMBI 6GX-10.130-7110.2E.270 brazing furnace was built by the Italian company Forni Industriali Heat Treating Plants in 2007. The furnace is used for soldering steel elements with solder paste at temperatures up to 1120 degrees Celsius. At the entrance and exit of the furnace, two pairs of gas burners (so-called safety pilots) are installed to prevent the escape of the protective atmosphere outside the furnace. Electric heaters powered by thyristor temperature regulators are responsible for the proper temperature in the furnace. The belt furnace has a conveyor speed adjustment in the range from 0 to 500 mm / min, and the working length of the soldering zone is 7100 mm. The furnace for brazing steel elements was modernized in 2021 - the thermal insulation and the cooling module for sections 1 and 2 were replaced. The cost of the modernization was 70,000 Euro.  ...

Corner round thruster Foellmer HE/F 31; good condition; cleaned and tested; Table equipment; Knife with radius 7mm. Corner rounding machine Foellmer HE/F31; good condition; cleaned and checked; table top machine; knife 7mm.

used 2 row Fortuna head machine mobile maximum hourly output 2400 pieces per srtück.Compact machine robust construction easy cleaning.Payment and delivery on request. Weight range 35-80 grams round buns 2-row Painted on rolls checked and cleaned Dimensions: Height: 170 cm Width: 100 cm Depth: 70 cm

Capacity round maximum diameter: 0 mm Angle degrees maximum: 0 Capacity square: 0 mm Workpiece height: 0 mm Workpiece width: 0 mm Capacity rectangle: 0 mm Technical data Cut range: round up to: 250 mm Square: 250 mm Execution: Horizontal hydraulic Automatic Cut length: min.: 3 mm max: 2 X 400 mm Cutting speed: stepless from: 14 m/min up to: 116 m/min Roll diameter: 460 mm Band length: 4100 mm Voltage 50 Hz 3x: 380 Volt Power: 4.00 kW Machine´s weight about: 1500 kg Overall dimensions machine: Length: 1700 mm Width: 1500 mm Height: 1350 mm Various accessories: Coolant system

1 x 'Forward Machinery Industrial Corp'. (Taiwan) 4 roll inverted L calender line, Year of manufacture: 2007, Roll dimensions: 34in (860mm) dia x 157in (4000mm) wide, Peripherally drilled (oil heating), Roller bearings, Motorised nip gap adjustment, Roll bending rolls 2 and 4, Cross axis roll 3, Independent drive to each roll:- Roll 1: 110kW, Roll 2: 150kW, Roll 3: 150kW, Roll 4: 110kW. Finished product width 3600mm. Pick off rollers, Matt finish embossing station, Edge trimming, 19 x cooling drums 355mm dia x 4000mm wide, Dual station surface winder. The line is already dismantled and ready for immediate shipment. There is also upstream equipment available by separate negotiation (high speed mixers, 2 x 100L Banbury, strainer, two roll mills etc).

Qty. 1 Second-hand Refining system using Argon Mfc.: FOSECO GmbH Model: FDU Type: Roto-Stativ Built: 2005 Max. pressure: 5 bar Capacity: 28 000 T/annum Degassing and purifying of non-ferrous metals and alloys by argon or nitrogen. Max. revolution: 400 RPM Power: 2.2 kW, 440 V, 3 ph., 50 Hz Rotor shaft length: 2000 mm Rinsing time: controlled in the range of 1-20 min. Degassing head lift: Mfc.: W. Flender Lifting speed: 3 m/min. Motor power: 0.75 kW Total weight: 1050 kg

Three flywheels Diameter mm: 900

Drying oven, curring oven chanel, chamber with fans Working temperature: 130 C° Max temperature: 200 C° 2 chamber Chamber 30 m3 Open size : 90x120 cm Heating capacity 110 kW 72 heating elements

Bread machine Fortuna Premium K with Magnus head machine -6 in a row -Stainless steel -with Siemens Touch control -Cutting rolls and Kaiser rolls -Built in 2010

P181 - used approx. 40 m³ / 40,000 litres PE-HD-tank, plastic tank, flat bottom tank, double-walled with an outer hull. specifications: capacity: approx. 40 m³ / 40,000 litres material: PE-HD tank, plastic tank manufacturer: Formoplast Kunststofftechnik GmbH measurements: Ø approx. 3,49 m outside / Ø approx. 3,00 inside x height tank approx. 5,70 m / total height approx. 6,50 m mark of conformity: PA-VI 321.103 specific weight: 1,13 kg/L media: former chemical tank for formalin DIBT and media list available, suitable for AHL and ASL PE-HD tank, professionally cleaned and in good condition. Double-walled, i.e. with an outer hull, non-translucid, various connections such as ventilation, inlet, suction pipe, etc., lid on top of the roof. According to the media list suitable for many different chemicals e.g. iron chloride, hydrochloric acid, acetic acid, caustic soda, sul ...

Painting drying plant Giardina Forno Statico MOS 3D Masch. No. 050354 Built in 2006 User manual available This plant is in good condition, ready for operation. Changes, mistakes, intermediate sale reserved ! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Technical data: - Drilling capacity in steel ST 60 40 mm - Drilling capacity in steel ST 60 45 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 200 mm - Extension 385 mm - Table with 2 T-slots with hand crank adjustable height - Table size 550 x 480 mm - min. / max distance table / drill spindle 120 / 650 mm - Column diameter 200 mm - Feed electromagnetic 0.1 - 0.2 - 0.3 - 0.4 mm/U. with overload protection - Drilling spindle speeds infinitely variable in 3 stages 60 - 1900 rpm. - Drive 400 V / 3 kW - Space requirement approx. W 700 x H 2120 x D 1100 mm - Weight approx. 700 kg - with: - Thread cutting device - Coolant device - digital speed display

Hydraulic

- Sturdy aluminum profile housing - Front loading via sliding door Further options for the machine frame: pneumatic lifting door or turntable individual customer wishes possible, e.B. Special dimensions of the marking chamber or lateral loading - Fiber laser 20 Watt with IPG fiber module (also available with 30 watt or 50 watt fiber laser) - Automatic Z-axis with 300 mm travel Another option: Turning unit for segmental labeling of the surface of cylindrical workpieces - Control via labeling software - Lens 160 mm (further lenses possible) - Perforated grid base plate (stainless steel) for workpiece mounting -LED interior lighting - Interior prepared for suction -Stable articulated arm with 23" monitor, mouse and keyboard, - Windows 10 operating system - Marking software Weldmark by Raylase On request also: Commissioning, instruction and trainin ...

Laser system 50 Watt, FOBA DP50 for marking and engraving Ideal for beginners or as an extension Deflection unit Scanlab, 254 mm Rodenstock lens with MB RAM and 17" monitor arm, Diode pumping chamber only about 2500 hours in use ready for use, built in 2003 Options: - Suction - other lenses - Machine table (various versions) - Double head/beam splitter Laser system completely cleaned and tested 6 months warranty excl. pumping chamber, place of warranty Lüdenscheid VAT will be shown Delivery EXW, collection possible On request also: Commissioning, instruction and training, maintenance concept, sampling of your workpieces

Form-on smartPROP 20 sF2 - 2,00 - 3,50m, new a 33,95€ net -low weight -long service life -safe working Your benefits: Effortless and fast work due to the low dead weight Preservation of the value of the support over many years thanks to high-quality production and galvanizing Safe working thanks to crushing and Failover Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Phone 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ warehouse address: Birkenstrasse 15 D-89185 Humlangen-Hüttisheim e-mail: sfsystemst-online.de Register court Ulm: HRA722943 VAT ID NO: DE279047055

Product number: 1829 Type: FGM48SC Serial number: 7829 Year of construction: 1999 Belt width: 400 mm Product height: max 150 mm Needles: 96 pcs of 4 mm Air pressure: 6 Bar Power: 3 x 400V, 50Hz, 32A Dimensions: 2300 x 1500 x 2300 mm Including self-cleaning protein filter FM80 and PFS5/225CS brine tank For boneless and bone-in products

continuous grilling line all stainless steel bottom contact grilling + hot air suitable for steam injection belt width 1,100 mm net length 11,000 mm underplate max. 260°C air temperature max. 280°C dimensions (l x w x h) : x 13,500 x 1,700 x 2,400 mm independent platen - air temperature and steam control adjustable speed PLC control Siemens frequency (new hard- and software, frequency inverters) With new Teflon belt suitable for thermic oil heating (600 kW) with belt wash system

"Packaging plant "Kombipacker 3 in 1" for the production of sales and transport packaging. Different packaging can be produced for me. It combines the functions of erecting and closing cardboard as well as the Top Loading function. In addition, both containers and loose bottles can be packed in cardboard. Packaging options - Lots 0.33 l bottles in 24 carton (12 carton optional) - Lots 0.5 l bottles in 20-caran (10-karton optional) - 4 baskets (2 x 3 ) each with 0.33 l bottle in a carton - Baskets 2 x 3 individually - 4 six-packs (2 x 3) with 0.33 l bottle to be packed in a carton Performance of the packaging machine Cartons: max. 10 cartons per min. Bottle types: 0.33 l LN or Vichy, 0.5 l NRW or 0, 5 l LN, 0.33 l Euro Baskets : 16 baskets per min. either in cardboard or individually Other types of bottles or containers may be possible. Must be examined in detail."

- Machine weight: 7 kg - Space requirement (W x D x H): 0.3 x 0.3 x 0.2 m Details Separate control unit for chuck clamping

Cutting area round: 250 mm Cutting area rectangular: 250 mm Saw band dimensions: 3660 x 25 x 0.9 mm Band speed: 20 - 70 m/min Saw drive: 1 kW Space requirement: 1900 x 1450 x 1250 mm Weight: approx. 850 kg

Pasta and automatic machine Fortuna head machine KM 4 used Fortuna head machine KM4, 4-row with flour. Easy cleaning of the parts because easily accessible. Capacity up to max. 4800 pieces/hr weight range of the head machine between 35-80 grams. Divide and act of dough as if by hand. Payment and shipping on request. 4-row Weight range 35-80 grams Hourly capacity max. 4800 pcs. Flour spreader mobile on wheels

Circular automatic saw make FORTE type FKA 45Built in 1970Saw blade dimensions: 225 x 32 x 2 mmCutting performance in non-ferrous metal: 60 mmCutting performance in steel: 45 mmSection length automatically up to: 200 mmCutting speeds: 35 - 900 m / minFeed rate hydraulic: 300/600 mm / sDrive power: 4/5 kWDimensions L x W x H: 2700 x 700 x 1250 mmWeight approx: 1033 kgWith- Bar magazine for steel and non-ferrous metalsExclusively non-ferrous metal has been produced on the machine!used, from an operating resolution, despite the year of constructionin very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools