fn 25 used for sale

Art. 5082 SW 9 / A/F 9 Article code: 90822212 250 Hanger bolts in accordance with DIN 6923, with EPDM seal Includes hex nut and washer Lot no.: 6222959 Auction-ID: A1-46380-822

Year of manufacture: 1999 Serial number: 1137 Hour meter: 4,468 h Numerical control: Heidenhain TNC 310 (3 axes controlled) Longitudinal stroke (X): 1,000 mm Transverse stroke (Y): 450 mm Vertical stroke (Z): 600 mm Table dimensions: 1,000 x 450 mm Permissible load on table: 500 kg Spindle taper: ISO 40 Rotational speed: up to 4,000 rpm (depending on variation ranges) Spindle motor power: 6.6 / 9.3 kW Overall dimensions (L x W x H): 2,300 x 2,300 x 2,400 mm Total weight: approx. 3,200 to 3,500 kg Disassembly and loading costs: €300 Auction-ID: A1-50714-4202

Soil Shovel 2500 1.60 m³ Manitou Auction-ID: A1-50849-153

Soil Shovel 2500 1.60 m³ Manitou Auction-ID: A1-50849-156

worktop; key set; unused in packaging; 4447; Auction-ID: A1-50865-4067

Including license plate. Hours: 11000. LED headlights Auction-ID: A1-41962-43

Art. 5082 SW 9 / A/F 9 Article code: 90822212 250 Hanger bolts in accordance with DIN 6923, with EPDM seal Includes hex nut and washer Lot no.: 6222959 Auction-ID: A1-46380-820

- Serial number 10474. - Maximum installed power 9 KW. - Maximum workpiece length approx. 2400 mm. - Maximum workpiece width approx. 330 mm. - Table for holding the templates. - 6 pneumatic clamping grippers. - 2 milling groups (right-left) with 5.50 KW motors. - Protective fences are included. - Operating conditions of this machine: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-56

- Operating conditions of this item: unchecked. - This item is delivered loaded by truck. The costs of dismantling and loading are those that are specified as additional costs. Auction-ID: A7-50834-9

Inverter welding machine. Suitable for welding with coated electrodes. Suitable for use in high-risk environments. Auction-ID: A7-50796-271

Inverter welding machine. Suitable for welding with coated electrodes. Suitable for use in high-risk environments. Auction-ID: A7-50796-171

Lithium battery, sold without charger Auction-ID: A1-50911-3

Inverter welding machine. Suitable for welding with coated electrodes. Suitable for use in high-risk environments. Auction-ID: A7-50799-171

Pulling force: 1134 Kg (2500LB) Supply voltage: 12V Motor power: 0.9 kW (1.2 KM) Gears: planetary, differential Reduction: 153:1 Rope length: 12 m Rope diameter: 4.8 mm Drum (diameter/length): 31 mm / 72 mm Winch dimensions (W x H x D): 295 x 105 x 120 mm Mounting hole spacing: 80 mm Auction-ID: A7-50799-303

The voltage converter is the ideal product for travellers, as it converts 12V direct current from batteries and car systems to 230V alternating current. Using it, you can power electronic equipment that requires a 230V power supply. Auction-ID: A7-50796-302

Inverter welding machine. Suitable for welding with coated electrodes. Suitable for use in high-risk environments. Auction-ID: A7-50799-71

Pulling force: 1134 Kg (2500LB) Supply voltage: 12V Motor power: 0.9 kW (1.2 KM) Gears: planetary, differential Reduction: 153:1 Rope length: 12 m Rope diameter: 4.8 mm Drum (diameter/length): 31 mm / 72 mm Winch dimensions (W x H x D): 295 x 105 x 120 mm Mounting hole spacing: 80 mm Auction-ID: A7-50796-303

The voltage converter is the ideal product for travellers, as it converts 12V direct current from batteries and car systems to 230V alternating current. Using it, you can power electronic equipment that requires a 230V power supply. Auction-ID: A7-50796-402

The voltage converter is the ideal product for travellers, as it converts 12V direct current from batteries and car systems to 230V alternating current. Using it, you can power electronic equipment that requires a 230V power supply. Auction-ID: A7-50799-492

Lithium battery, machine out of order Auction-ID: A1-50911-1

Inverter welding machine. Suitable for welding with coated electrodes. Suitable for use in high-risk environments. Auction-ID: A7-50796-71

Sale from candelabra/lamp post factory liquidation. LISTA MEGAMAT 2056/254/40 paternoster storage system. 40 trays, 304 kg weight capacity/tray (12160 kg in total) With additional 4 pallets of plastic boxes in various sizes. Condition: Condition as shown in the photographs. The unit is offered in untested condition. Missing or damaged parts may be present. Quality and completeness have not been verified. Documentation: No documentation or user manual is available. Important – dismantling and loading: The equipment is sold ex foundation. Dismantling and loading are entirely the buyer’s responsibility. No dismantling or loading assistance is available on site. Upon request, the seller can provide the contact details of a third-party company that may be able to assist with dismantling and reinstallation. Viewing: Viewing is possible by appointment. Auction-ID: A1-50908-2

Pulling force: 1134 Kg (2500LB) Supply voltage: 12V Motor power: 0.9 kW (1.2 KM) Gears: planetary, differential Reduction: 153:1 Rope length: 12 m Rope diameter: 4.8 mm Drum (diameter/length): 31 mm / 72 mm Winch dimensions (W x H x D): 295 x 105 x 120 mm Mounting hole spacing: 80 mm Auction-ID: A7-50796-403

Pulling force: 1134 Kg (2500LB) Supply voltage: 12V Motor power: 0.9 kW (1.2 KM) Gears: planetary, differential Reduction: 153:1 Rope length: 12 m Rope diameter: 4.8 mm Drum (diameter/length): 31 mm / 72 mm Winch dimensions (W x H x D): 295 x 105 x 120 mm Mounting hole spacing: 80 mm Auction-ID: A7-50796-493

Holland Lift - Combistar M-250HYL25 4WD/P/N, Year 2015 - Internal No. 3725 A superlative scissor lift with a working height of 27.50 m, a load capacity of 1,000 kg and a platform that is over 8 m long when extended and can carry 4 people including heavy equipment. Platform height: 25.50 m Platform length extended: 8.23 m Height of transport position without railing: 2.92 m Ground clearance: 18 cm Hybrid drive All-wheel drive Supports white tires Auction-ID: A1-50910-87

Pulling force: 1134 Kg (2500LB) Supply voltage: 12V Motor power: 0.9 kW (1.2 KM) Gears: planetary, differential Reduction: 153:1 Rope length: 12 m Rope diameter: 4.8 mm Drum (diameter/length): 31 mm / 72 mm Winch dimensions (W x H x D): 295 x 105 x 120 mm Mounting hole spacing: 80 mm Auction-ID: A7-50799-493

Pulling force: 1134 Kg (2500LB) Supply voltage: 12V Motor power: 0.9 kW (1.2 KM) Gears: planetary, differential Reduction: 153:1 Rope length: 12 m Rope diameter: 4.8 mm Drum (diameter/length): 31 mm / 72 mm Winch dimensions (W x H x D): 295 x 105 x 120 mm Mounting hole spacing: 80 mm Auction-ID: A7-50799-403

The voltage converter is the ideal product for travellers, as it converts 12V direct current from batteries and car systems to 230V alternating current. Using it, you can power electronic equipment that requires a 230V power supply. Auction-ID: A7-50799-302

Holland Lift - Combistar M-250HYL25 4WD/P/N, Year 2015 - Internal No. 3726 A superlative scissor lift with a working height of 27.50 m, a load capacity of 1,000 kg and a platform that is over 8 m long when extended and can carry 4 people including heavy equipment. Platform height: 25.50 m Platform length extended: 8.23 m Height of transport position without railing: 2.92 m Ground clearance: 18 cm Hybrid drive All-wheel drive Supports white tires Auction-ID: A1-50910-89

Inverter welding machine. Suitable for welding with coated electrodes. Suitable for use in high-risk environments. Auction-ID: A7-50799-271

The voltage converter is the ideal product for travellers, as it converts 12V direct current from batteries and car systems to 230V alternating current. Using it, you can power electronic equipment that requires a 230V power supply. Auction-ID: A7-50796-492

TEUPEN - LEO 25Tplus, year of construction 2013 - Internal No. 7818 Platform height: 23.20 m Max. swivel range: 450° Rotatable work basket: 180° Max. lateral reach (200 kg): 15.00 m Max. lateral reach (80 kg): 18.00 m Variable support system with narrow support on one or both sides Gradeability: 30 % Chain (L x W): 1.92 x 0.25 m hydraulically height- and width-adjustable track chassis white, non-marking rubber track with tread for good grip hydraulic braking system Electro-hydraulic control Defects: With the combustion engine: starter batteries defective, idle speed temporarily too low = goes off again, after x try or operate the accelerator yourself, the machine stays on, machine does not stop via the emergency stop button, direction of travel on the left of the tensioner for the chain leaks, functions are given when the machine raises the speed of the required require ...

The voltage converter is the ideal product for travellers, as it converts 12V direct current from batteries and car systems to 230V alternating current. Using it, you can power electronic equipment that requires a 230V power supply. Auction-ID: A7-50799-402

Total weight: 750kg Net weight: 375 kg Loading area: 2500x1250x1500 mm Single-axle version Tyres: 155/70 R13 Lashing eyes on the loading area Round hole lashing rail left and right Double hinged door Door stop mint condition, unused, exhibit COC papers and entry in the Austrian registration register Auction-ID: A1-50676-10

Machine is equipped with: - chip conveyor - through spindle coolant - Heidenhain handwheel - coolant filtration system - 30 position ATC Auction-ID: A1-50690-20

250 running metres, 8/6/8 mm thickness, height 2.03 m Double bar mat fence complete set including posts and Clamp plate fastening material Fence elements: 2030 mm height and 2,500 mm length Post for concreting: 2600 mm Number of fence elements: 100 pieces Number of posts: 101 pieces Total weight: 4800 kg Double rod mats material: Galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to 10245-4 Fence tips: 30mm Mesh size: 50mm x 200mm Mat width: 2510mm Fence post material: Hot-dip galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to EN10245-4 Post cap material: plastic Material accessories: stainless steel Post profile: 60 x 40 x 1.5mm Pre-assembled fastening attachments made of plastic incl. rivet nuts, clamping plates made of stainless steel, fence screws M8 x 40 stainless steel, Post caps without protrusion Location: Indu ...

USED KITAMURA KNC 250YS CNC Lathe Main Spindle Bar Diameter: 42 mm Spindle Nose Type: A2-5 Spindle Power: 7.5 kW Spindle Speed: 100 - 5000 RPM C-Axis Indexing: 0.001° Counter Spindle Spindle Power: 3.7 kW Spindle Speed: 100 - 5000 RPM C-Axis Indexing: 0.001° Turret 1 Turret / 12 Stations with Rotating ToolsAxis strokes: X = 160 - Y = 70 - Z = 260 mm Equipped with 1 FANUC 18i-T CNC 1 Parts recuperator 1 Chip conveyor 1 Set of fixed and rotating tool holders 1 IEMCA BOSS 542 bar feeder Machine dimensions and weight : 3800x2000xH1800mm - weight 4000kg + 1 pallet 200kg Auction-ID: A1-50950-34

Main Spindle: - spindle rpm: 4000rpm - spindle motor power: 18,5kW - C-axis: 0,001° Sub spindle: - spindle speed: 6000rpm - spindle motor power: 10kW - C-axis: 0,001° Turret: - 12 positions - live tooling (4500rpm, 5,5kW) - tooling in turret not included! Machine us equipped with: - chip conveyor - bar feeder - live tooling - sub spindle - Y-axis (-51mm ~ +51mm) - part catcher - tool setter Auction-ID: A1-50690-24

Total weight: 750 kg Net weight: approx. 368 kg Internal dimensions: 2530 x 1520 x 400 mm Tyres: 165/70R13 2 unbraked axles welded, hot-dip galvanized Aluminium side walls H 300mm all side walls removable Steel floor Hand Pump mint condition, unused, exhibit COC papers and entry in the Austrian registration register Auction-ID: A1-50676-20

250 running metres, 8/6/8 mm thickness, height 1.83 m Double bar mat fence complete set including posts and Clamp plate fastening material Fence elements: 1830 mm high and 2,500 mm long Posts for concreting: 2400 mm Number of fence elements: 100 pieces Number of posts: 101 pieces Total weight: 2200 kg Double rod mats material: Galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to 10245-4 Fence tips: 30mm Mesh size: 50mm x 200mm Mat width: 2510mm Fence post material: Hot-dip galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to EN10245-4 Post cap material: plastic Material accessories: stainless steel Post profile: 60 x 40 x 1.5mm Pre-assembled fastening attachments made of plastic incl. rivet nuts, clamping plates made of stainless steel, fence screws M8 x 40 stainless steel, Post caps without protrusion Location: Indust ...

Auction-ID: A1-50718-10

Control SIEMENS Simatic OP7, incl. roller conveyor 2500 mm and various saw blades Auction-ID: A1-50626-20

USED FAMAR ERGO 250 CNC lathe Serial No.: 20.68 Year: 2001 Machinable part Diameter: 200mm Max. length on turret: 125 mm Max. tool block length: 200 mm Axles Axis strokes: X: 340 - Z: 215 mm Fast feeds: X: 60 - Z: 30 m/min Ball screw diameter: 40 mm Spindle Spindle nose: 6\" Spindle power S6: 30 kW Speed: 6000 rpm Max centering diameter: 350 mm Equipped with 1 CN SIEMENS SINUMERIK 1 Chip conveyor Dimensions and weight Machine: 2460x1950xH2680mm - conveyor: 4000x1400mm - Total weight: 7000 kg + 7 pallets Auction-ID: A1-50950-13

TEACH-IN LATHE Inv. No. 13.051C1 Make CMT URSUS Model URSUS PLUS 250 Year 1996 Serial number 12628 Centre Distance 1.000 mm Max. Swing over Bed Ø 480 mm Max. Swing over Cross slide Ø 400 mm Spindle bore Ø 105 mm 2 ranges stepless 0 – 2.000 kW 8/11 Volt 380 Cycles 50 Including Toolholder Multifix 3-jaw chuck Ø 315 Auction-ID: A1-50718-47

Tool holder type SK 40, travel X-axis 100 mm, travel Z-axis 400 mm, voltage connection 220 V, weight 80 kg, transport dimensions 1200x800x500 mm Auction-ID: A1-50626-1

Completely in stainless steel. ___ inside width 1700_ height 1850 Auction-ID: A3-46136-2863

Should still work, without diesel cases. Auction-ID: A3-46137-17557

250 running metres, 8/6/8 mm thickness, height 1.83 m Double bar mat fence complete set including posts and Clamp plate fastening material Fence elements: 1830 mm high and 2,500 mm long Posts for concreting: 2400 mm Number of fence elements: 100 pieces Number of posts: 101 pieces Total weight: 2200 kg Double rod mats material: Galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to 10245-4 Fence tips: 30mm Mesh size: 50mm x 200mm Mat width: 2510mm Fence post material: Hot-dip galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to EN10245-4 Post cap material: plastic Material accessories: stainless steel Post profile: 60 x 40 x 1.5mm Pre-assembled fastening attachments made of plastic incl. rivet nuts, clamping plates made of stainless steel, fence screws M8 x 40 stainless steel, Post caps without protrusion Location: Indust ...

250 running metres, 8/6/8 mm thickness, height 2.03 m Double bar mat fence complete set including posts and Clamp plate fastening material Fence elements: 2030 mm height and 2,500 mm length Post for concreting: 2600 mm Number of fence elements: 100 pieces Number of posts: 101 pieces Total weight: 4800 kg Double rod mats material: Galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to 10245-4 Fence tips: 30mm Mesh size: 50mm x 200mm Mat width: 2510mm Fence post material: Hot-dip galvanized according to DIN EN 10244-2 and RAL 7016 powder-coated according to EN10245-4 Post cap material: plastic Material accessories: stainless steel Post profile: 60 x 40 x 1.5mm Pre-assembled fastening attachments made of plastic incl. rivet nuts, clamping plates made of stainless steel, fence screws M8 x 40 stainless steel, Post caps without protrusion Location: Ind ...

- VW Crafter panel van / double cab with high roof - Registration date: 10/2016 - Chassis number: WV1ZZZ2EZG6057049 - 2.0-litre diesel engine, 140 hp / 103 kW - 6-speed manual transmission - Wheelbase: 3,665 mm - Mileage: 251,229 km - Semi-automatic air conditioning - Electric windows - Electrically adjustable and heated exterior mirrors - Electric air auxiliary heater - Electric closing aid on the sliding door on the right - Radio RSD 2000 with Bluetooth interface - Passenger double bench seat with armrest - 3-seater bench seat in the 2nd row of seats - Partition wall to the cargo area behind the 2nd row of seats - Front and rear parking sensors - Step at the rear - Reinforced rear shock absorbers - Lightning bars on the roof - Spare wheel available - Complete steel winter wheels on the vehicle - Cargo area with interior lining, lashing rails and side installations -  ...