126,702 used machines on RESALE, but how to find them? Machine Search
Travel X/Y/Z: 2500mm/900mm/800mm, speed: 18000rpm, spindle power: 35kW, max. table load: 3000kg, tool places: 30, machine dimensions X/Y/Z: approx. 6500mm/3000mm/3000mm, weight: approx. 20000kg, control: Siemens Sinumerik 840D, operating hours: 55730h, spindle hours: 18696h. Z-axis brake defective, roller shutter in machine room defective, screen cable defective. Including cooling lubrication system Knoll VRF 250/1250, documentation available. On-site inspection is possible.
Travel X/Y/Z: 600mm/500mm/400mm, table dimensions X/Y: 900mm/600mm, spindle mount: SK40, speed: 6000rpm, tool positions: 24, feed: 6m/min, rapid traverse: 15m/min, machine dimensions X/Y/Z: approx. 4000mm/4000mm/2700mm, weight: approx. 5000kg. On-site inspection is possible.
Clamping force: 2500kN, clear tie bar distance: 630mm/630mm, opening stroke: 1150mm, min. mold installation height: 330mm, screw diameter: 60mm, specific injection pressure: 2000bar, max. stroke volume: 670cm³, connected load: 74kW, control: MC4. Machine dimensions: 5700mm/2200mm/2300mm, machine weight: 12.5t, operating hours: 47,572h. Available from February 2025, including special accessories, Krauss Maffei LRX-S 100, 8x hot runner control points, 4x core pull, blow-out unit, pressure accumulator, hydraulic tie-bar pulling device, energy-saving circuit, ALS interface, 20mA interface and color dosing device interface. On-site inspection is possible, documentation available.
A complete 5-layer coextrusion blown film line with 5 extruders and all peripheral equipment is available. Total line dimensions X/Y/Z: 14m/22m/11m, blow head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melting capacity: 500kg/h, total power requirement: approx. 300kW. 1) Double winder Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6inch. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, renewed: 2010. 3) Adhesive extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Center extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion promoting extruder Kiefe ...
Turning diameter over bed/face slide: 420mm/280mm, turning length: 1000mm, spindle bore: 78mm, max. speed: 3550rpm, drive power: 35kW, tool positions: 12 (with driven tools), tool holder: VDI50, rapid traverse: 10m/min. Machine dimensions X/Y/Z: approx. 4100mm/2300mm/2200mm, weight: approx. 10000kg, control: Siemens 840T with C-axis. After a buffer battery replacement, the software of the machine was deleted, whereby some machine parameters were deleted without documentation and automatic operation is currently impossible. Expected to be available from Q1, 2025.
Flywheel size: SAE1/14, Mecc Alte ECO38-1L/4C, DER1 voltage regulator, 300kVA continuous / 330kVA stand-by power; Gross weight [kg]: 771
With two machining modules, X-axis: -50 to 725mm, Y-axis: -200 to 300/ -250 to 250mm, rapid traverse X-, Y-, Z-axis: 18/12/30m/min, turning lengths: 1500/2000/2500/3200/4000/4500/6500mm, swing diameter: 780/ 880mm, turning spindle bore: 92/123mm, main spindle speed range: 0-3000/0-3000/2000/min, max. Turning/milling unit speed: 5000/6000/10000/min, max. tool length: 900/600/1000/300/900mm, quill stroke: 160/170mm, connected load: 102kVA, control system: SINUMERIK ONE / SINUMERIK 840D sl, drive system control: SINAMICS S120, weight: 17t. On-site inspection is possible.
swing diameter:200 mm weight of the machine ca.:15 t Distance between tips:832,5 mm turning length:380 mm with chip conveyor and belt filter press, infeed and outfeed belt 2 x 12-position revolvers
Travel X/Z: 800mm/300mm, max. turning diameter: 320mm, max. turning length: 300mm, speed: 5000rpm, spindle power: 22kW, tool slots: 12, tool holder: VDI 40, main spindle clearance: 79mm. Machine dimensions X/Y/Z: approx. 5000mm/3900mm/2800mm, weight: approx. 6700kg, control: Siemens Sinumerik 840D, operating hours: 42996h. Documentation available. On-site inspection is possible.
cutting width: 150 mm machine weight ab.: 300 kg : 27468 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter:200 mm swing diameter:260 mm turning height:60 mm
Travel X/Y/Z: 820mm/300mm/485mm, table dimensions X/Y: 250mm/1000mm, spindle mount: SK40, speed: 2800rpm, spindle head swivel: +/-45°, quill stroke: 100mm, feed: 630mm/min, connected load: 9.5kW, machine weight: approx. 1600kg. Documentation available. On-site inspection is possible.
: ja vice: 1 quill stroke: ja : : 2.000 mm weight of the machine ca.: 790 kg strong material: Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter:200 mm turning height:120 mm weight of the machine ca.:18 t Available from 01.08.2024
control:siemens 1P 6SL 3054--0CE01-1AA0 Documents:vorhanden
pressure:10 t stroke:400 mm total power requirement:1,6 kW weight of the machine ca.:1,1 t dimensions of the machine ca.:1100 x650 x 2050 mm dayligth:500 mm table-size:400 x 450 mm Documents:vorhanden
Cutting depth:70 mm engine output:12.4 A, 220/380 V , 2 x 6 kW working length:2500 mm dimensions of the machine ca.:3900 x 1100 x 1000 mm weight:1500 kg
An HMS punching machine is available. Pressing force: 250t, stroke height: 40mm, installation height: 450mm, ram adjustment: 20mm, stroke rate: 120 strokes/min, overall system dimensions X/Y/Z: approx. 17000mm/8000mm/3500mm. Including coil and strip processing. Documentation available. On-site inspection is possible. Expected to be available from September 2025.
workpiece diameter: 50 mm threading length: 100 mm thread pitch: mm total power requirement: 1 kW weight of the machine ca.: 1500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting width:2500 mm Numbers of torche:2 Type of gas:Sauerstoff, Propan total power requirement:2 kW length:6000 mm control:KS 20 A Messer Griesheim Documents:vorhanden
table width:2300 mm table length:7000 mm burner heads:1 Plasma -Schneidk. burner heads:2 autogene Schneidköpfe control:NBS 400 Documents:vorhanden
material width:250 mm material thickness:0,2 - 2,0 mm no. of straightening rolls:7 straightening roll diameter:60 mm run-in height:1250 mm power capacity:4,0 kW weight:0,65 t Dimensions (WxDxH):1,05 x 1,25 x 1,5 m
pressure:250 t distance between columns:1110 mm stroke:250 mm Distance table/ram, max. stroke up, adjustment up:500 mm Table surface area:1100 x 900 mm Table height above floor:950 mm Side window:690 mm Ram surface:1100 x 900 mm Oil volume:730 l Power capacity:56,0 kW Dimensions (WxDxH):2,3 x 1,55 x 3,96 m
Load capacity: 25t, center of gravity distance: 700mm, eccentricity: 250mm, speed: 0.66rpm, tilt range: 0°-130°, tilt time: 120s, table height (flat): 1930mm, axis of rotation height: 1600mm, table diameter: 2500mm, motor power tilt/rotate: 7.5kW/4.5kW, total length: 3000mm, total width: 2500mm. Documentation available. On-site inspection is possible.
max. wheel diameter: 2500 mm gear width: 1200 mm max. module: 32 min. module: 3 total power requirement: 25 kW weight of the machine ca.: 60 t dimensions of the machine ca.: m Gear , min. / max. 180 / 2,500 mm Module 3 - 32 Helix angle, max. 10 - 35 ° Gear width for straight gears 1,200 mm Stroke length, approx. 100 - 1,200 mm No. of strokes 80 - 350 /min Stroke position adjustable 300 mm Stroke speed 4 - 40 mm Max. weight of workpiece, approx. 18,000 kg Min. / max. no. of teeth 16 / 576 Table size x bore 1,400 x 500 mm Grinding wheel Ø, approx. 500 mm Grinding wheel peripheral speed 34 m/s Total electrical load, approx. 45 kW - 380 V - 50 Hz Weight of machine, approx. 60,000 kg Accessories / Special Features: Hydrostatic guides in grinding slide, table and in all other guideways. Completely covered working area with sliding doors. Automatic grinding process for various cycles, with ...
material width:250 mm material thickness:0,5 - 4,0 mm no. of straightening rolls:9 straightening roll diameter:60 mm number of draw-in rolls:2 power requirement:3,8 kW Weight:0,8 t Dimensions (WxDxH):1,6 x 0,8 x 1,5 m
Three welding machines are available. (1) Castolin+Eutectic CASTOWIG 150 G, power supply: 5A/10V to 150A/16V, max. short-circuit current: 0.15kA, weight: 50kg. (2) MIG O MAT WIGSTAR 250i, welding current: 10-250A, duty cycle: 100% at 160A, 60% at 200A. (3) Lorch SEW 200N, voltage: 400V, welding current: 230A, cooling: gas-cooled. (4) Heberle stud welding systems cd System 2010, connected load: 0.6kVA. On-site inspection is possible.
max. wheel diameter: 2500 mm gear width: 0 mm max. module: 34 min. module: 1 total power requirement: ca. 15 kW weight of the machine ca.: 15 t dimensions of the machine ca.: 4,20 x 2,00 x 2,90 m Extra große ZR-Prüfmaschine, Gegenhalter The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Injection pressure: 2100bar, injection volume: 595cm³, injection weight: 565g, injection speed: 299cm³/s. Clamping force: 250t, clamping force: 275t, platen dimensions X/Y: 920mm/920mm, opening stroke: 575mm, mold height min./max.: 200mm/685mm, tie bar distance: 585mm, ejector stroke: 175mm, ejector stroke: 180mm, centering: 160mm, operating hours: 62149h. Documentation available. On-site inspection is possible.
workpiece diameter: 250 mm centre distance: 0 mm honing length max.: mm max. module: 5 Gear Ø, min./max. 10 / 250 mm Module range 1 - 5 Length of teeth / max. table stroke 500 mm Height of centres of tailstocks 220 mm Max. weight of workpiece 50 / 100 kg Honing head swivelling +/- 35 ° Speeds of honing tool 20 - 500 rpm Size of honing tool, Ø x width 300 x 40 mm Workpiece speeds 500 - 3,000 rpm Total adjustment of cross slide 270 mm Rapid traverse of cross slide 50 mm Infeed travel of cross slide, mechanical 1 - 8 mm/Ø Roughing / finishing infeed 1 - 29 / 0.2 - 2.8 mm/sec Table speeds, hydraulic 0 - 6 m/min Total electrical load 5.5 kW - 380 V - 50 Hz Weight 3,200 kg Accessories / Special Features Working parameters can be preset using counters and control units. Automatic working process with workpiece counter. All roughing and finishing infeeds can be adjusted by a decade switch ...
Decoiler Coil weight: 2,5 ton Material width: 50 - 500 mm Coil exterior diameter: 1400 mm Expansion range: 420 - 520 mm Leveller / Straightener Material width : 500 mm Number of levelling rolls: 9 pcs. Diameter of the levelling rolls: 50 mm Number of pinch rolls: 2 pcs. Material thickness: 6 mm Cross section: 3000 sq mm Feeding speed: 6 - 24 m / min
honing diameter: 80 mm stroke: 280 mm throat: 300 mm total power requirement: 6 kW weight of the machine ca.: 2,6 t Honing Ø 10 - 100 mm Max. honing depth, approx. 250 mm Max. spindle stroke 260 mm Distance between spindle and column 300 mm Mounting height 1,000 mm Table size 350 x 500 mm Height of table above floor 500 mm Spindle speeds in 2 steps, infinitely variable, approx. 85 - 300 rpm 170 - 600 rpm Stroke speed, infinitely variable, hydraulic 0 - 23 m/min Spindle drive 2 kW Total electrical load 6 kW - 380 V - 50 Hz Weight 2,600 kg Accessories / Special Features Built-on 2-station tilting table which accommodates 2 workpieces. Mechanical workpiece clamping, using a manual lever. Hydraulic infeed of the tool. Switch-off via timer. Air measuring device (probably). Honing oil unit. Various splash shields, etc. Condition : Good. Machine can be in ...
A Trima CNC gantry machining center is available. Workpiece dimensions X/Y/Z: 2500mm/1100mm/80mm, spindle power: 7.5kW, speed: 24000rpm, tool positions: 10, traversing speed X/Y/Z: 55m/35m/15m/min. Machine dimensions X/Y: approx. 4400mm/2500mm, weight: approx. 3200kg, control: Siemens Sinumerik. The machine has a control defect. The reference run is aborted. Documentation available. On-site inspection is possible.
: M01.43870 frequency: 50 Hz voltage: 400 V : 24 V connected load: 48 kW rated current: 63 A control: Siemens 840 D turning diameter: 250 mm turning length: 100 mm weight of the machine ca.: 7,5 t turning length external: / innen 100 mm workpiece length - min.: 29 mm workpiece length - max.: 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
faceplate diameter: 2500 mm swing diameter: 2865 mm turning height: 3000 mm Control: R & D type: MTC 4 Rest: 2 slide adjustment: 1500 mm turning speeds: 140 U/min tool change unit: 12 Pos. total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Machine is modernized The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was cre ...
Capacity: 250 ton V ? Ring nominal force: 30 - 125 ton Counter ram nominal force: 30 - 125 ton Ram stroke: 67 mm Table surface area : 560 x 600 mm Slide area: 560 x 560 Number of strokes: 80 s.p.m. Weight of machine approx.: 14.000 kg
turning diameter: 250 mm turning length: 100 mm control: SIEMENS 840 D total power requirement: 35 kW weight of the machine ca.: 7500 kg dimensions of the machine ca.: m E M A G (Germany) Vertical CNC Controlled Hard Turning and Grinding machine with tool turret and workpiece handling System Model VSC 250 DS Year 2004 # M7 28.69324 _______________________________________________________ Turning Ø, max. 250 mm Turning length internal / external 100 mm Workpiece length min./max. 29 – 100 mm 6-positon tool turret Ø / swing-Ø 480/790 mm Workpiece spindle Slide travel, X / Z / stroke 680 / 400 / 200 mm Feed rate / Quick feed X/Z 45/30 m/min. Feed force X/Z 5,5/11 kN Spindle speed 4.300 / 6.000 rpm Spindle drive 28 kW Total electrical load, ...
cutting diameter: 255 mm saw band length: 2765x 0,9 x 27 mm cutting width: 300 x 180 mm turning speeds: 35 + 70 U/min total power requirement: 1,8 kW weight of the machine ca.: 450 t dimensions of the machine ca.: 1,7 x 1,23 x 1,75 m SPECIAL PRICE! Double miter metal band saw, frequency converter hydraulic semi-automatic GBS 250 Super HA-I Easy • miter left 60° + right 45° • Material height sensor (automatic cut start detection) • Frame and gear made from one piece, very quiet cut and very low vibration • Hydraulic vice can be moved sideways a. • Guided, high quality industrial bearings • Solid vice + machine casting • Large machine bed • Machine base with tool compartment and chip drawer • Cut monitoring by ammeter • Cutting pressure feed regulator • Support roller (infeed side) • Ball bearing turntable Semi-automatic function: 1. Clamp material 2. Saw starts 3 ...
; Power [PS]: 170; Gross weight [kg]: 2750; Engine: Battery System: LIFePO4
Perkins 1100 Series 1104D-44TA, 83.0 kW / 111.3 hp @ 2200 rpm; Power [PS]: 113; Transport weight [kg]: 567
core drilling diameter max.: 25 mm bore depth: 1000 mm swing diameter: mm total power requirement: 25 kW weight of the machine ca.: 12,5 t dimensions of the machine ca.: m T B T (Germany) CNC-Controlled Horizontal Deep Hole Drilling Centre Model BWP 250 Year 1996, but reconditioned mechanically and electrically in 2006 ______________________________________________________________________ _____________ Working range: X Axis, machine column cross 2,000 mm Z Axis, drilling slide horizontal 1,200 mm Drilling depth 1.000 mm Y Axis, drilling slide vertical 1,100 mm Table clamping area 1,200 x 2,000 mm Drilling capacity in solid material, approx. 4 - 25 mm Tool holder taper HSK 50 Spindle speeds 1.260 - 15,000 rpm Feed rates / quickfeed, XYZ, infinitely variable 100 - 10,000/15.000 mm/min. Force rate of feed ...
pressure: 2,5 kN stroke: 45 mm throat: 90 mm Working height from to: 80 - 220 mm table surface area: 120 x 60 mm weight of the machine ca.: 22 Kg dimensions: 160 x 230 x 390 mm Hand presses with rack HZ 250 The power is transmitted via a rack and pinion construction. she finds their use where during the working process a constant pressure is needed. Precisely manufactured, spindle hardened and ground, unlimited service life Long spindle guide, optimal pressure performance, T-slot according to DIN 650 milled in the middle, sliding blocks fit exactly. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Saw blade diameter: 255 mm Sawblade tiltable: 45 ° Cutting height: 75 mm Table dimensions: 640 x 920 (ausgezogen) mm Saw blade: 30 mm Motor output: 1,6 kW connected load frequency: 230 V machine weight ab.: 32 kg Dimensions (L/W/H): 720 x 1080 x 920 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
maximum number of results exceeded
please refine your search
