fm 38 used for sale

Datos técnicos: (1) Formato mínimo: 400 x 400 mm Formato máximo: 1260 x 1250 mm Pliego superior: Cartoncillo de180 – 450 g/m2 Pliego inferior: Entre 0,5 y 8 mm Velocidad máxima: (2) Hasta 6000 hojas/hora Precisión: ± 1,5 mm Potencia instalada: 17 kW Dimensiones: 13,9 x 2,22 x 2,68 m Peso: 7.000 kg (1) Los datos técnicos pueden ser modificados por el fabricante sin previo aviso. (2) La velocidad puede variar en función del material y su calidad, formatos y otros requisitos de producción.

pressure: 30 t throat: 200 mm stroke: 0 - 60 mm table:: 400 x 600 mm table:: 150 mm - Bohrung no. of strokes: 140 Hub/min bore: 40,0 mm - Werkzeug compressed air: max. 6,0 bar dayligth: 300 mm total power requirement: 3,0 kW weight: 1.670 kg range L-W-H: 1150 x 1350 x 2050 mm Furnishing: - Welded steel structure body frame - AISI 4140 (42CrMo4) alloy steel crankshaft - CNC ground for maximum precision SnBz-12 quality - Bronze bearings, ground for minimal surface resistance - 4 sides pneumatic clutch-brake combination - PLC control for safety (PILZ Germany) - Photo cell light barriers around the work table (PILZ Germany) - Two-hand and foot pedal control - Adjustable stroke - Central lubrication system - CE safety approval by TÜV - electrical equipment SIEMENS, SCHNEIDER, PHOENIX, OMRON The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 10 t throat: 160 mm stroke: 0 - 40 mm table:: 270 x 370 mm table:: 100 mm - Bohrung no. of strokes: 200 Hub/min bore: 25,0 mm - Werkzeug compressed air: max. 6,0 bar dayligth: 180 mm total power requirement: 0,75 kW weight: 590 kg range L-W-H: 1.168 x 1.010 x 1.670 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FMB Turbo 5-42 ist ein Stangenlademagazin hoher Präzision, ausgelegt für hohe Genauigkeit und Zuverlässigkeit. Kapazität: Rundstangendurchmesser 5–42 mm; Stangenlänge max. 3200 mm; Reststücklänge min. 530 mm; Vorschub 0–400 mm/s. Hauptdaten: max. Vorschubkraft 550 N; Anschluss 50 Hz 3x 400 V; Leistung 2 kW; Druckluft 6 bar; Abmessungen L 4700 × B 915 × H 1200 mm. Eignet sich für enge Toleranzen; typische Branchen: Automotive, Uhrmacherei, Werkzeugmaschinen, Luft- und Raumfahrt, Medizin. Technische Daten ohne Gewähr

MCM Clock FMC ist ein 5-Achsen Bearbeitungszentrum, ausgelegt für Präzision, hohe Genauigkeit und Zuverlässigkeit. Verfahrwege X 750 mm, Y 860 mm, Z 850 mm; Tischteilung B 0,001°; 12 Paletten 630x630 mm. Werkzeugmagazin 334 Plätze, Aufnahme HSK-A100. Spindel stufenlos bis 11.000 min-¹, Spindelmaschine 25 kW; Vorschübe X/Y/Z 32 m/min. FMS-System verfügbar, Kühlmitteleinrichtung und Späneförderer vorhanden. Erreicht enge Toleranzen; geeignet für Automotive, Luftfahrt, Medizintechnik, Uhrenindustrie und Werkzeugbau. Technische Daten ohne Gewähr

FMB Turbo Turbo 3-26 ist ein Stangenlademagazin hoher Präzision, ausgelegt für hohe Genauigkeit und Zuverlässigkeit. Kapazität: Rundstab Ø 3–26 mm, Stangenlänge max. 3200 mm, Reststück min. 450 mm, Vorschub 0–400 mm/s. Technische Daten: max. Vorschubkraft 550 N, Anschluss 3x400 V 50 Hz, Leistung 2 kW, Druckluft 6 bar, Gewicht ca. 750 kg, Maße L4700×B700×H1500 mm. Ermöglicht enge Toleranzen; geeignet für Automotive, Uhrenindustrie, Werkzeugmaschinen, Luftfahrt und Medizintechnik. Technische Daten ohne Gewähr

: neu : ca. 6 Monate ab Auftragse : Taiwan : 171210 € : 3235.87 € : 610 mm : 590 mm : 600 x 300 mm : 600 x 300 mm : 0 - 25 m/min : 0 - 4000 mm/min : 0,001 mm : 350 mm : 450 mm : 0 - 3800 mm/min : 0.001 mm : 600 - 3600 1/min : 11 kW : 3103 mm : 3933 mm : 2480 mm : 5800 kg : 810 mm : 314 kg : 420 kg : 405 x 50 x 127 mm : 2,4 / 3,9 kW : 3.9 kW : 0,005 mm : 0,003 mm Rigid machine construction with a movable column for effective stability to ensure high grinding performance and machining accuracy Smart iControlIV control with 15", touchscreen with electronic wired handwheel PC-based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multi-groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (4 front and 2 rear) All 3 axes wit ...

Introducing the CNC Machining Center with FANUC Control System, designed for precision and efficiency in industrial applications. This machine features an extensive axis travel of 1700 mm (X-axis), 750 mm (Y-axis), and 700 mm (Z-axis), accommodating a wide variety of machining tasks. The robust spindle operates at 12,000 rpm, ensuring high-speed performance with a BT50 tool holder and a 24-slot tool magazine for versatility and reduced downtime. The large worktable supports complex operations, and the included 4th axis enhances multi-dimensional machining capabilities. This equipment is maintained in excellent condition, ready to meet the demands of modern manufacturing environments. Available now for immediate shipping to enhance your production facility.

Used GEA Aseptic filling line 48000 BPH - year 2020 (data of use)Technical Specifications & Performance DataThis used bottling line is a 2020 PET aseptic production line configured for 230 ml PET bottled water at a rated output of 48,000 bph. It combines PET bottle blowing, aseptic processing, filling, capping, labeling, inspection and secondary packaging for high-output beverage production. Production capacity: 48,000 bph Available bottle format: 230 ml PET only Main line year: 2018, 2020 (data of use) Blowing equipment: SIPA SFR24 EVO, 48,000 bph Filling equipment: GEA FILLSTAR FX AS 84 PET filler, 48,000 bph Compressor: AF L5S, 35 bar, 220 kWAdvanced Automation & Control SystemsThe line includes electrical control cabinets with HMI displays, ventilated electrical enclosures and high-voltage warning protection. Process equipment includes a Tetra Pak FLEX1 PET UHT sterilizer rated at 17 ...

Trumpf TruMatic 6000 FMC -1300 Sheetmaster + Gripmaster Hersteller: Trumpf Typ: TruMatic 6000 FMC -1300 Baujahr: 2006 Zustand: gebraucht, sehr gut. regelmässig von Trumpf gewartet. Maschine ist unter Strom und im Einsatz. Betriebsstunden NC-Stunden: 70.305h Strahl-Ein Stunden: 17.217h Steurung: Siemens Sinumerik 840 D Stanzkraft: 220KN Laserleistung: 2700W Arbeitsbereich Laserbetrieb ca.: 2585 x 1280 mm Arbeitsbereich Stanzbetrieb ca.: 2585 x 1370 mm Max. Blechdicke ca.: 8 mm Auflagetische Bürstentische CE-Kennzeichnung Standardausstattung: Stabiler, gut zugänglicher C-Rahmen Koordinatenfürhung mit integriertem Linearmagazin, 21 Plätze für Werkzeuge und Spannpratzen 1 Spannpratzen Wartungsfreie Drehstrom Servomotoren Teilerutsche 500 x 500 mm (sensorüberwacht) HI-LAS Hochdruckschneiden TRUMPF Laser: CO2-Laser TLF 2700 Hochfrequenzanregung Lasersteuerung T ...

Inclined bucket mixer Manufacturer FMW Type 115200/21H475.1 Capacity 50 litres Material: Stainless steel heated, double jacket

Steel plate and chain belt conveyor belt Manufacturer: FMW Förderanlagen GmbH Year of construction: approx. 2019 Total length approx. 45,000 mm Width: approx. 2000 mm For sale here is a steel plate and chain belt conveyor belt with a total length of approx. 45 m and a width of approx. 2 m. For exact data, please refer to the drawing. The conveyor belt is currently still set up and can be visited on request. Disassembly is not included in the price.

: neu : ca. 6 Monate ab Auftragse : Taiwan : 197510 € : 3732.94 € : 1010 mm : 590 mm : 1000 x 400 mm : 1000 x 400 mm : 0 -25 m/min : 0 - 4000 mm/min : 0,001 mm : 450 mm : 450 mm : 0 - 3800 mm/min : 0.001 mm : 600 - 3600 1/min : 11 kW : 3675 mm : 4055 mm : 2480 mm : 6500 kg : 423 kg : 670 kg : 405 x 50 x 127 mm : 2,4 / 3,9 kW : 5.9 kW : 0,005 mm : 0,003 mm Rigid machine construction with a movable column for effective stability to ensure high grinding performance and machining accuracy Smart iControlIV control with 15", touchscreen with electronic wired handwheel PC-based control with graphical dialog programming or G-code programming Infinitely variable speed Surface grinding cycle, cross grinding cycle, plunge grinding cycle, multi-groove grinding cycle, contour grinding cycle, dressing cycle Spindle with 6 angular contact ball bearings (4 front and 2 rear) All 3 axes with preci ...

Ex-proofed solvent preparation station made of stainless steel. The station consists of: -> 3 pcs. compressed air driven diaphragm pumps -> stainless steel solvent tank -> drip pan made by Denios -> ex-proofed agitator and stainless steel reactor -> stainless steel piping

Shearing Joining & Fine Blanking Machine FM18-3100 cuts wood-based materials, veneers, chipboard, fibre and plastic panels, Hard paper, foils, thin metal sheets and acrylic glass - Angular, joint-tight and splinter-free The machine has been certified by the BG "Holz" in accordance with the principles for the Testing of the occupational safety of technical work equipment examined. It bears the "GS" mark for tested safety. -Operating instructions available

Alimenta Newpack Division Thermoform FM100/E-20 HC form fill seal machine (FFS) for mini-portions of jam with fruit parts / marmelade / honey / choco paste., Mini-portions are the ideal, hygienic way to package portions for use in hotels, aboard airplanes, for catering and for single-person households without compromising on quality and freshness. Less packaging material needed thanks to the use of forming material of minimal thickness, even heating up of the material and accelerated forming process for an optimally controlled and optimally distributed wall thickness, minimal punch waste from the low-waste punch unit, volume-saving, overlapping packing configuration when final packaging into boxes or tray., Working principle: cup material supply from the reel, pre-heating the cup material, forming the cup, date coding inside the bottom of the cup, filling the cup (fruit parts possible, C ...

Nu-Way Enertech FMP40-MOD-NG350P+ Gas Burner 2025, unused, compact industrial packaged gas burner, covers outputs up to 150 therms, NAT GAS, 1.1Kw motor, 3Ph

Standard configuration ⦁ Stable C-frame ⦁ Coordinate guide with linear magazine with 19 tool stations ⦁ 2 clamps ⦁ Drives with maintenance free 3-phase servo motors ⦁ Programmable presser foot for repositioning ⦁ Repositioning device with programmable strippers ⦁ Sensor monitored part chutes 500 x 500 mm for Punching and Laser station ⦁ 2 good parts containers ⦁ Laser unit: TruFlow 2700 CO2 Laser radio-frequency excited, isolated against vibrations, integrated in machine frame, including cooling unit and Laser control TASC 3 ⦁ NitroLine: High-pressure cutting ⦁ SprintLine ⦁ ContourLine ⦁ Programmable cutting gas pressure ⦁ Laser cutting head with 5 lens ⦁ Laser cutting head with 7,5 lens ⦁ Laser cutting head - quick changing device ⦁ ControlLine ⦁ LensLine ⦁ Punching head: Mono tool adapter, 360° rotation of all tools, automatic tool lenght compe ...

Standard configuration Machine ⦁ Stable C-frame for easy access ⦁ Coordinate guide for high-precision machining ⦁ Linear magazine with 19 tool stations, 2 clamps ⦁ Maintenance free drives ⦁ Repositioning device with programmable presser foot ⦁ Parts chute 500 x 500 mm ⦁ Good parts container ⦁ Chip conveyor ⦁ Automatic shutdown mechanism Cutting head ⦁ Electro-hydraulic punching head ⦁ Rotatable single tool adapter ⦁ 360° rotation of all tools ⦁ Programmable presser foot ⦁ Tool length compensation ⦁ Spray lubrication for punches ⦁ Vacuum slug removal ⦁ Forming Control ⦁ Open control system based on BOSCH PNC-B ⦁ Control panel with TFT colour screen 12.0” ⦁ Program management ⦁ Production plan ⦁ On-line help ⦁ Integrated technology data ⦁ Diagnostic functions Programming ⦁ Machine-oriented shopfloor programming Data transmission � ...

Standard configuration Machine ⦁ C-frame ⦁ Coordinate guide ⦁ Linear magazine with 21 spots for clamps and tools ⦁ Hydraulic clamps (3 pieces) ⦁ Drives with maintenance-free 3-phase servo motors ⦁ Repositioning unit with programmable stripper ⦁ Ball-fitted tables ⦁ Foot switch for closing clamps ⦁ Part chute ⦁ Part removal flap 500 x 500 mm ⦁ Finished part container ⦁ Chip container ⦁ Ability for retrofitting ToolMaster Linear ⦁ 1st index pin position right hand inner side Punching station ⦁ Electro-hydraulic punching head ⦁ Rotatable single station tool adapter ⦁ Manually adjustable presser foot force ⦁ Programmable position of the presser foot ⦁ Tool length compensation ⦁ Spray lubrication for punches ⦁ Vacuum slug removal with condition monitoring ⦁ Forming ⦁ Stroke rate punch ⦁ Level monitoring of tool lubrication ⦁ On-Demand-Dri ...

Riveting machine, radial riveting unit, riveting unit, orbital riveting machine, radial spot riveting machine, orbital riveting head, riveting head -Manufacturer: FMW, orbital riveting machine type HN1 -Shaft diameter: 12 mm -Motor: 0.37 kW 1390 rpm -Protrusion: 170 mm -Table dimensions: 300 x 250 mm -Stroke: 35 mm -Dimensions: 580/385/H670 mm -Weight: 119 kg

Standard configuration Machine ⦁ Stable C-frame for easy access ⦁ Linear magazine inclusive four clamps ⦁ Parts flap 500 x 500 mm ⦁ Good parts container ⦁ Ability to retrofit ToolMaster Linear Punching station ⦁ Electro-hydraulic punching head ⦁ Rotatable single tool adapter ⦁ Programmable presser foot ⦁ Stripper position sensor ⦁ Tool length compensation ⦁ On-Demand-Drive ⦁ Punch stroke rate and thread stroke rate counters ⦁ Spray lubrication for punches ⦁ Vacuum slug removal with condition monitoring ⦁ Monitoring of fill level of tapping and tool lubrication Control ⦁ Open controller based on Sinumerik 840D Solutionline ⦁ Control panel with 17 TFT touch screen Data transmission ⦁ USB interface and network connection RJ45 Safety ⦁ CE marking ⦁ Multi-beam light barriers ⦁ Rapid hydraulic shutdown ⦁ Sheet collision detection Addition ...

Riveting machine, radial riveting unit, riveting unit, orbital riveting machine, radial spot riveting machine, orbital riveting head, riveting head -Manufacturer: FMW, Orbital riveting machine type HN1B-2 -Shaft diameter: 10 mm -Motor: 0.37 kW 1400 rpm -Protrusion: 170 mm -Table dimensions: 300 x 250 mm -Stroke: 35 mm -Dimensions: 580/385/H670 mm -Weight: 119 kg

General SKU331Y745 LocationBarneveld MakeEurofiltec TypeFM 1000 No.LLF 1728 Pressure Working pressure1 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface0.8 m2 Specified Features - Nutsche filter Nutsche filtercheck Filter surface0.8 m2 Capacity500 l Vessel sizesø 1000 x 650 mm Plate sizesø 650 mm Top connectionscheck Liquid outletcheck MaterialStainless steel 1.4435 (316L) General Year of constructionunknown Mounted on framecheck Floorspace1,20 x 1,10 m Total height1,65 m Weight400 kgFine chemicalsOther chemicalBiotechnologyPlastic & polymersAgrochemicalsCatalysts & fillersFeed additivesCosmeticsFood additivesAnimal feedNutsche filtersSolid pharmaceuticsBeveragesDyes & pigmentsBiopharmaceuticalMinerals & inorganicEurofiltecIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chemical > BiotechnologyIndu ...

WORKING RANGE CYLINDRICAL GRINDING   swing diameter (max): 515 mm   workpiece weight between centers (max): 500 kg   workpiece weight flying (max): 120 kg WORKING RANGE EXTERNAL GRINDING   grinding diameter (max): 515 mm   grinding length: 1500 mm TABLE -CYLINDRICAL GRINDING-   tilting range (B-direction) min: 8.3 °   rotating range B-axis up to: -4 °   longitudinal travel: 1680 mm WORKPIECE SPINDLESTOCK   spindle revolutions (min): 14 /min   spindle revolutions (max): 114 /min   number of gears: 2   drive power: 1.5 kW   tool fixture: MK 6 TAILSTOCK   sleeve stroke: 40 mm   taper: MK 5 SPINDLESTOCK GRINDING SPINDLE   tilting range (B-direction) min: -10 °   rotating range B-axis up to: 10 °   drive power: 15 kW GRINDING TOOL   type of grinding tool: wheel   diameter (max): 630 mm   borehole: diameter: 203.2 mm   width: 125 mm DIMENSIONS  ...

bar material dia.: 65 mm bar length: 3000 mm voltage: 400 V weight of the machine ca.: 1,2 t dimensions of the machine ca.: 5,32 x 0,95 x 1,52 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Standard configuration Machine ⦁ Closed machine frame ⦁ Hybrid axis system ⦁ Linear magazine with 20 spots for clamps and tools ⦁ Hydraulic clamps (3 pieces) ⦁ Drives with maintenance-free 3-phase servo motors ⦁ Repositioning unit with programmable stripper ⦁ Foot switch for closing clamps ⦁ Beam guard ⦁ Part chute right side ⦁ Part removal flap left side ⦁ Sensor for part removal flap ⦁ Work area illumination ⦁ FocusLine ⦁ SortMaster Compact retrofit capability TRUMPF Laser ⦁ Solid state laser TruDisk 3001 with 1 laser output ⦁ Fiber optic cable according standard layout (10m) ⦁ Laser power control ⦁ Logbook function laser ⦁ Closed beam guidance via laser light cable (LLK) ⦁ Separate energy supply of TruDisk Compact cutting unit ⦁ Solid-state compact cutting unit ⦁ Protective glas ⦁ Collision protection ⦁ ControlLine Punching head � ...

horizontal machining center, year 2003, CNC 18i-M. Used machine. More info & price on IndustrialBuyer.

Dairy Machinery UK Farm Milk Cooling Tanks, Space saving, ergonomic design-chassis with solid leg construction and adjustable feet., Constructed completely from AISI 304 Stainless Steel, welded and polished to global food grade standards.Insulated with CFC free polyurethane, thickness varying from 38mm at the top to 100mm at the bottom, adding extra strength to the structure., Laser Welded S.S 304 Evaporator (0.9/1.5/2mm). Milk Cooling Tank consists of milk vessel made from 1.5mm S.S 304 and insulation vessel made from 1mm S.S 304., Detachable Butterfly valve-DN 50, SMS thread One piece top Lid made from S.S 304 with thickness of 1.5mm mounted with pneumatic springs to allow easy and safe opening and closing of the tank. Gear motor with micro switch for gentle agitation of RPM 30-36,1Φ-50Hz from Dairy Machinery UK, Make: Dairy Machinery UK, Model: FMCT-1000 L , Capacity: 1054 Litres , C ...

Dairy Machinery UK Farm Milk Cooling Tanks, Space saving, ergonomic design-chassis with solid leg construction and adjustable feet., Constructed completely from AISI 304 Stainless Steel, welded and polished to global food grade standards.Insulated with CFC free polyurethane, thickness varying from 38mm at the top to 100mm at the bottom, adding extra strength to the structure., Laser Welded S.S 304 Evaporator (0.9/1.5/2mm). Milk Cooling Tank consists of milk vessel made from 1.5mm S.S 304 and insulation vessel made from 1mm S.S 304., Detachable Butterfly valve-DN 50, SMS thread One piece top Lid made from S.S 304 with thickness of 1.5mm mounted with pneumatic springs to allow easy and safe opening and closing of the tank. Gear motor with micro switch for gentle agitation of RPM 30-36,1Φ-50Hz from Dairy Machinery UK, Make: Dairy Machinery UK, Model: FMCT-1800 L , Capacity: 1930 Litres , C ...

Metal band saw blade, band saw blade, metal saw band -Metal saw band: 34 x 2 mm, unused -Length: 3800 mm -Weight: 1.2 kg

Ersatzteile - Spare Part MB Multipli 382 2 folding buckles for MB 382 Band delivery for MB 382 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Transformer - Voltage Transformer 3P 500V --> 3P 380V Manufacturer presumably Flasshoff & Klosterberg Type 45500 Power 45kVA Primaer 3x500 Secondary 3x380V + neutral Hz 50-60 Insulated IP44 Outer dimensions approx.: Transformer 100cm wide 80cm high 60cm deep Weight approx. 400kg Special price

Type: SNZP 380.1 HX1P11 Year of construction: 1998 No. 7610158 Q = 30/167 l / min N = 60/220 l / min Drive North in EEx II Capacity: 3.3 kW, 400V Drive North N1-n2 = 33-258 min-1 Type: SK 33-R1960-112 M / 4 ED Dimensions: LWH = 2300x420x500mm Weight: 250 kg

Accessories

E - engine of Exhaustor 3 x 380 volts.

High pressure cleaner PTC Easypower XL E similar but no Dynajet, Oertzen, Falch, Hammelmann, Woma, Uraca, Kamat, Denjet - Operating pressure: 400-1500 bar - Foerder quantity: 13-38 l/min. - Motor: IE3 Electric 63A, 3Ph-400V-50Hz 50HP/37kW, 1450 w-min or IE3 Electric 63A, 3Ph-440V-60Hz 50HP/37kW, 1750 1-min - Dimensions: 1,450 x 900 x 1,050 mm - Empty weight: approx. 450 and 550 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage supply (24V) and control unit with star-triangle starter and 10 m. power cable - Safety switch with thermomagnetic relay for motor protection - Main switch, start/stop buttons, emergency stop - Operat ...

High pressure cleaner PTC Easypower L E similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet - Operating pressure: 400 or 500 bar - Foerder quantity: 38 or 30 l/min. - Motor: Electric 63A, 3Ph-400V-50Hz 40HP/30kW, 1450 rpm or electric 63A, 3Ph-440V-60Hz 40hp/30kW, 1750 rpm - Dimensions: 1,370 x 850 x 1,030 mm - Empty weight: approx. 280 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage supply (24V) and control unit with star-triangle starter and 10 m. power cable - Safety switch with thermomagnetic relay for motor protection - 4 industrial wheels - Direct water suction by self-priming pump - Stainless steel relief v ...

AEG Power straightener MINISEMI 380/160

Charging for forklift trucks with traction battery 80 volts Type Tebetron-E 50/80 Power connection 380Volt Power 80 Volt 50 Ampere Connection to the battery Rema 160A (see picture), other plugs available. Digitally monitored charging for saeure batteries e.g. 5PZS750 Mass approx. Height 110cm Width 55cm Depth 40cm Weight 80kg Ready to use Special price

380 V, 50 Hz, 0.37 kW, interference test 18 W

Cold water high-pressure cleaner with 15 kW output 380 bar pressure and 21 l/min. Connection: 3 x 400 V; 50 Hz or 3 x 460 V; 60 Hz.; 32 A Equipment: - Epoxy coated steel frame - Stainless steel cover - Compact, narrow chassis with stop function - Crane lifting device - Triplex high-pressure pump - Water inlet temperature max. 60°, thermal valve - Main switch with emergency stop function - Soft automatic start-up - Grid monitoring (phase control and undervoltage) - Connection cable 5.0 m with 32 A plug (50 Hz/60 Hz) - Water inlet filter Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - High pressure gun with isotube - Double jet tube and high pressure nozzle 030 Special equipment (included in the price): - Automatic start-stop with flow switch and switch-off delay 30 seconds - Water inlet filter 10" with sand filter insert and ...

Type V-380 Number of wheels(pcs)-3 Wheels diameter-120 mm Wheels width-60 mm Feeding rate-3.5/5/7/10/12.5/16/25/32 m/min Motor power-750w/550w Machine frame - Cast aluminum Feeding direction:Forward/Reverse Video abcs://youtu.be/xZFPl9-vHtg

Te Koop: Samson for Type: 3804 Druk: 0.016 - 0.4 bar maximum druk 0.76 bar. Prijs is incl. BTW

Cold water high-pressure cleaner with 15 kW output 380 bar pressure and 21 l/min. Connection: 3 x 400 V; 50 Hz or 3 x 460 V; 60 Hz.; 32 A Equipment: - Epoxy coated steel frame - Stainless steel cover - Compact, narrow chassis with stop function - Crane lifting device - Triplex high-pressure pump - Water inlet temperature max. 60°, thermal valve - Main switch with emergency stop function - Soft automatic start-up - Grid monitoring (phase control and undervoltage) - Connection cable 5.0 m with 32 A plug (50 Hz/60 Hz) - Water inlet filter Standard accessories: - 10m high pressure hose DN10, kink protection on both sides - High pressure gun with isotube - Double jet tube and high pressure nozzle 030 Special equipment (included in the price): - Automatic start-stop with flow switch and switch-off delay 30 seconds - Water inlet filter 10" with sand filter insert and ...

24 months warranty TOP value for money Solid, movable baguette long roller, mounted on a mobile frame with caps lock wheels Capacity: 50 g - 1200 g, 1200 pieces per hour Roll width: up to 75 cm on retractable felt rolling belt Mechanical adjustment of Ausroll properties Dimensions in cm: 105 x 69 x 153 (WxDxH) Height of the machine without frame: approx. 70 cm, Engine power: 0.55 kW 380V - 3Ph - 50 Hz - 16A-CEE connector Weight: 258 kg Price incl. mobile base --- Alternative as stainless steel model: SM-380S (machine completely in stainless steel): Price: 5.220,-- incl. mobile frame