We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
120,316 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
Ladies and gentlemen, Below we can offer: Manufacturer: Make: 1 piece used continuous furnace, make: Safed Type: 11Bd40/24 Built: 2005 max. working temperature: 1100C Heating capacity: 60 kW Dimensions Length: 15,000 mm Usable width: 340 mm Useful height: 150 mm Heating chamber length: 2,380 mm Muffle, cooling channel new Prices and pictures on request All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We accept no liability for used material. Warranty e ...
used
Inlet: 380 mm x 480 mm, wheel with upstream slide valve, driven by cylindrical gear drive with 3 kW / 42 RPM, only few funning hours.
used
We offer the following Flat- and satchel paper bag machine for sale: Producer : Windmoeller & Hoelscher Type : Matador NP 38 Year : 1994 Bag width : 60 – 380 mm. Cut-off length : 200 – 600 mm. Roll width : 1060 mm. Roll dia. : 1200 mm. With : W&H Alina 650 - 4 colour in-line printer With: Window unit Still in operation: Yes Available: Now
used
Motor logs gripper with electro-hydraulic drive. Diameter: 1,000 mm Weight: 1,260 kg Drive parts: 1) Electric motor 5.5, kW - 100% ED, protection class IP 54, rotary 1,450 rpm, operating voltage 380 V, 50 Hz 2) Constant pump - axial piston - inclined axis design, type A2FM. Flow capacity 23.2 l/min 3) Hydraulic cylinder (2 pcs.) Type 80/55, MAKE MRS double-acting, piston rods hard chrome-plated 4) Tax block NG 10, make Of Herion Turning ranges, change of direction of rotation changing from right to left and left to right, for all drive parts of Pos. 1) - 4) Fittings: made at Ermeto Electrical control: Installation according to electric circuit diagram No. 26.0.144.4 In very good condition!
used
Type: Pipeline Model 63, magnet separator for removing iron from ceramic chippings etc., input: 380/220/115 V, output: 24 V / 7.5 A (transformer built-in), 2.4 to./h.
used
Pipeline Model 63; Magnet separator for eliminating iron contamination in ceramic and other slurries. Trafo input: 380/220/115 Volts, Output: 24 Volts / 7,5 A
used
Sale used Bedo packaging machine Built: 1985 Control voltage: 380V Pressure: 5 bar Shoots cardboard with wet glue Box size: 400x600 (WxL)
used
Fischer-W.Mueller wind machine type: FMB 4/12-100, 3 layer Coex Blow machine Complete Line control: Moog construction year TMC: In 1998 hose unity snail diameter mm: 50/90/50 mass and weights dimensions LxBxH m: 7.4 x 7.7 x 2.4 machine weights kg: 14,300/5.000/11.000 other Data Sheet: FISCHER FMB used 4/12/100 3 layer Coex Blow machine Complete Line Year: In 1998 Location: Mülheim / storage fire: Model FISHER W.Mueller: FMB 4/12/100 land: For Sale Availability: Immediate Technical details of container with the current configuration: 1 l Number of heads: 12 materials: PE Number of stations: 2 extrusions type: Continuous Number of extruders: 3 2 x 2.0-50mm Unex Unex 1x 6.0-90 mms Screw diameter: 120 mms of engine power: 22 kW 90 kW of L / D: 24 and 28 Technical details Cycle - 12.6 sec = output / day = 70,000 botles The head included. For more information Availability: I ...
used
Creo Lotem 400 Manufacturer: Creo Model: Lotem 400 Year: 2005 4-page format Plate min.: 381 x 318 mm Plate max.: 750 x 622 mm F Speed: 15 plates/hour fiber head 24 diodes, 830nm Resolution :up to 3556 dpi ,Platewinding 37800 Bacher Control 2000 Punch Workflow ,Creo Prinergy Evo
used
Kuka KR125-1 Built 96/97 Payload 125kg Range 2.4m Connection line 7m Control KRC1 Profibus Software V2.2.8 Basic version KS V2.38_4 ..
used
Manufacturer: GORBREX Model: TKV 516 New in: 2015 CNC control: CNC SIEMENS SINUMERIK 828 Location: our workshop, Rudniki - Poland Machine fully modernized and modified of SEDIN 1516. Machine with new electrical unit, new lubrication unit, painted, slideways regrinded, replacement of worn mechanical parts. Machine will be equipped with new CNC control SIEMENS SINUMERIK 828. Delivery time: 3-4 months Tool Changer and Warranty Technical details Numbr of columns: 1 Number of carriages: 1 Type of carriage: Rotary head in 5 position or Ram Axis controlled: X/Z Turning diameter: 1 600 mm Faceplate diameter: 1 400 mm Max workpiece height: 1 000 mm( with possibility of extension to 1400 mm) Max table load: 5 000 kg Range of table speeds: 5-200 rpm Number of speeds range stepless: 3 Vertical travel of Z axis: Rotary head: 700 mm Ram: 1000 mm Horizontal carriage travel in X a ...
used
Gearmotor Bauer D1A41AHZ/253 - used - MANUFACTURER´S DATA Bauer D1A41AHZ/253 motor speed: 1420/114U/min tension: 380/Y protection class: IP54 shaft: 30mm CONDITION+HISTORY • operational standby-motor out of a company breakdown • shaft rotates, no further operation tests • condition see photos INSPECTION Motor can be inspected at any time. TERM´S OF DELIVERY Ex works DE - 83395 Freilassing, free on truck. COLLECTION By agreement Please feel free to contact us for any further questions! Project Organisation Alexander Torlach GmbH Breslauer Str. 41a 83395 Freilassing phone: +49(0)8654-77669-0 fax: +49(0)8654-77669-15 info@torlach.com
used
Manufacturer: Wright Engineers cable diameters from 25 mm to 160 mm can be processed. Cables with PVC, rubber and iron ammization Drive 380 V Weight: 1740 kg Condition: new Diameter of cables to strip from 25 mm - 160 mm can strip cables with pvc, rubber, and also with armouring out of iron drive: 380 V weight: 1740 kg NEW MACHINE Every time we have 8 different cable-strippers on stock. New and second-hand machinery
used
Gearmotor Bauer DK940 AH/241 - used - MANUFACTURER´S DATA Bauer DK940 AH/241 output: 2,0 PS Motor speed: 1400/121U/min tension: 380Δ/Y protection class: IP65 shaft: 25mm CONDITION+HISTORY • operational standby-motor out of a company breakdown • shaft rotates, no further operation tests • condition see photos INSPECTION Motor can be inspected at any time. TERM´S OF DELIVERY Ex works DE - 83395 Freilassing, free on truck. COLLECTION By agreement Please feel free to contact us for any further questions! Project Organisation Alexander Torlach GmbH Breslauer Str. 41a 83395 Freilassing phone: +49(0)8654-77669-0 fax: +49(0)8654-77669-15 info@torlach
used
Manufacturer Demag Type Ergotech 100-310 System NC4 Control NC 4 Built in 1995 Closing unit Closing force t 100 Opening path mm 500 Holm size mm 400 x 400 Installation maximum min/max mm 250/- Plate size 540 x 540 Spraying unit Screw diameter mm 35 Spray volume cm3 168 Spray weight gr 152 Spray pressure bar 168 Mass and weights Dimensions LxWxH m 4.1 x 1.3 x 1.8 Machine weight Kg 3820
used
8m3 silo, type CB8000, capacity 8 m3, payload approx. 14 to, Total height 4,250 mm, outlet height 1,050 mm, stand area 1,800 x 2,380 mm, Outlet flap NW 250
used
POREBA Model: TR 90 x 6000 Manufacturer: POREBA- Poland Model: TR 90 x 6000 Condition: very god, complete, no missing or broken parts Technical details: Distance between centres: 6000 mm Height of centres over bed: 435 mm Height of centres over carriage: 310 mm Swing over bed: 900 mm Swing over carriage: 570 mm Swing in gap: 1150 mm Turning length in gap: 390 mm Spindle bore: 105 mm Spindle taper: Morse’a 6 Spindle speeds number: 18 Spindle speeds: 7.5 - 380 rpm Numer of feeds without replacing wheels: 55 Longitudinal feeds: 0.13 - 4 mm Cross feeds: 0.065 - 2 mm Number of metric threads: 55 Range of metric feed strokes: 0.5 - 15 mm Number of inch threads: 55 Range of inch theads strokes: 2 - 60 /inch Number of main motor rotation: 1460 mm Engine power: 20 kW Lead screw stroke: 2 /inch Tapers linear twist: 10 Length of cutting tapers: 720 mm ...
used
Module formwork system EBAWE / Eilenburg we offer a used module formwork system (year 1996) The plants come from the assets of an insolvent paver of different concrete elements (ceiling, walls, garages and modules). Plant for the production of space modules in the basic sizes 6000 x 2400 mm, the height can be varied from 2,850 3.100 mm. Thus, the maximum floor height is 3,250 mm. Technical description: Taktfertigung manufactured space cells made of reinforced concrete with at least one open long side without soil in different sizes. Window and door openings, as well as large-scale breakthroughs can be provided. The system consists of the following components: 1.1 Module formwork for the production of space modules) -is the form of Chamber for the production of concrete item (space cell) -The two sides are at the stationary side walls arranged swivel -Vibrators are attached to all w ...
used
Manufacturer Demag Type Ergotech 100-310 System NC4 Control NC 4 Built in 1997 Closing unit Closing force t 100 Opening path mm 500 Holm size mm 400 x 400 Installation maximum min/max mm 250/- Plate size 540 x 540 Spraying unit Screw diameter mm 35 Spray volume cm3 168 Spray weight gr 152 Spray pressure bar 168 Mass and weights Dimensions LxWxH m 4.1 x 1.3 x 1.8 Machine weight Kg 3820
used
8m3 silo, type CB8000, capacity 8 m3, payload approx. 14 to, Total height 4,250 mm, outlet height 1,050 mm, stand area 1,800 x 2,380 mm, Outlet flap NW 250
used
Vibration table / table We offer: used vibration table / table Condition: good, ready for use Manufacturer: unknown Year of constr.: 1995 estimated Dimensions: Width: 3500 mm Length: 8000 mm Height: 550 mm Steel quantity: approx. 8 mm Weight: estimated 3500 kg Vibration / vibration motors: 6 pieces Manufacturer: Bosch Type: Connection data: 250 V, 3 A; 1.0 KW; 200 Hz Speed: 5700 RPM The supply of vibration / vibration motors via a central frequency converter Bosch (for 2 toggle vibration tables and 6 vibration tables. This when purchasing multiple systems can be purchased: Technical data frequency: Produced for Bosch from the Flender sky / Tübingen Type: 2 GR132/135 (poorly readable) Motor: 11 KW, 380 V, 50 Hz; 22.5 A, 2880 rpm, cos.phi 0,89 Converter sec.: 11 / 12,5 KW; 250 V, 200 Hz, 2 26, 4 / 28; 9 A Control: Bosch Accessories: 2 or 4 forms for dominoes (see photos) More ...
used
Small container CB8000, capacity 8 m3, payload 14 to, net weight 1,300 kg, stand area 1,800 x 2,380 mm, height 4,250 mm, outlet height 1,050 mm, outlet outlet NW 250
used
Technical data: Turning diameter over bed: 1260 mm Turning diameter at opening: 2700 mm Turning diameter at the pit: 3800 mm Turning diameter via slide: 900 mm Turning length: 4000/5000 mm
used
Operating voltage: 380/400 volts with digital positioning display x,y, without feed in y direction, with angular table, work surface with 4 T-slots Mistakes reserved!
used
Thread cutting power M 2 - M8 Speed: 700 rpm, luf requirement: 750 l/min, pressure 6 - 7 bar, working range extension: 300 - 1900 mm, Afbau parallel arm: stable arm structure made of hard aluminium profile (38x29) Weight: 23 kg, adapter holder: TCS 1 B - incl. 6 safety slip couplings according to your choice year: 2009
used
132 kW, max. 11 bar, 20,3 m3/min. Air end new in 2001 and has 38000 working hours.
Manufacturer PWH Flow capacity 400 m3 hour of bulk material Grit 0 to 30 mm Bulk weight 0.84 to 0.90 to / m3 Water content 18% Heap height 12 meters Operating voltage 380 V Control voltage 220 V Bucket capacity: 100 litres • Number of shovels: 8 pieces • Bulk per minute: 60 • Theoretical power: 360 m3/h • Effective power: 280 m3/h • Bucket wheel diameter: 3.45 m • Circumferential force (wheel): 15,000 N • Cutting speed on the knife: 1.35 m/sec • Removal height (heap height): 12 m • Discharge of the lowered wheel: 11 m • Lifting height on the paddle wheel: 6 m • Lifting speed on the paddle wheel: approx. 3 m/min • Senovice speed on the paddle wheel: approx. 3m/min • Swivel speed: approx. 12 m/min • Angle of rotation of the trolley (suspension): 360 • Angle of rotation of the trolley
used
Manufacturer Heckler & Koch Model AM 444 A Power consumption: 5.5 KW Voltage: 380/400 Volts Spindle holders for vertical and horizontal spindles: 40 Slide movement x = 410nn y = 350mm z = 400mm Vertical clamping table 850 x 255 mm Feed range 0-1500 mm/min Sliding gearbox 12-stage Speed: 63-2800 rpm Step jump 1.4 CNC control CNC 783/m Dimensions (HxWxD) 1.800x2.400x1.700mm Weight 1,500 kg Ref.Nr PLW18 Mistakes reserved!
used
Cat.-No. 13-0290 in very good condition Operating pressure test at 2.0 bar Test medium: water at 22 ° C at 1 bar pressure Capacity: 2400 l / h Engine power: 2.20 kW, 50 Hz Connections: inlet and discharge pressure DN 65, thread according to DIN 32676 -can be converted against extra charge With frequency inverter infinitely variable (surcharge) on request Dimensions and weight: Length: 850 mm width: 380 mm height: 770 mm weight: 125 kg Note: 100% pump all prices apply ex works plus gesetzl.MwSt tested with warranty. Delivery: from 97753 Karlstadt Karlsburg freight expenses: reserved to standard equipment sale
used
Manufacturer Arburg Type Allrounder 420C 1000-350 Control Dialogica Built in 1997 Closing unit Closing force t 100 Opening path mm 500 Holm size mm 420 x 420 Installation height min/max mm 250 Plate size 545 x 545 Spraying unit Screw diameter mm 35 Spray volume cm3 139 Spray weight gr 117 Spray pressure bar 2500 Dimensions and weights Dimensions LxWxH m 4.3 x 1.6 x 1.9 Machine weight Kg 3850 Other 2 pieces core pull control with "core holding pressure" pressure and pressure flow programmable interface for handling connection coloring device
Grote & Hartmann, 380V,50 Hz, 0, 45Kw, Fabrikatnr. 5618/84
used
Manufacturer Demag Type Ergotech 100-310 System NC4 Control NC 4 Built in 1995 Closing unit Closing force t 100 Opening path mm 500 Holm size mm 400 x 400 Installation height min/max mm 250/- Plate size 540 x 540 Spraying unit Screw diameter mm 35 Spray volume cm3 168 Spray weight gr 152 Spray pressure bar 168 Dimensions and weights Dimensions LxWxH m 4.1 x 1.3 x 1.8 Machine weight Kg 3820 Other
used
Kiener Skinetta Pac-Systeme ASK-300 bundler and stretch wrapper, output up to 32 packs per minute. Maximum reel width 300mm. Maximum final pack dimensions 380mm (W) x 360mm (L) x 290mm (H). Includes stacking unit.
used
Manufacturer Engel Type ES7000/1100 CC100 Control CC 100 Built in 1994 Closing unit Closing force t 1100 Opening path mm 1400 Holm size mm 1420 x 1170 Installation height min/max mm 600/1200 Plate size 1990 x 1740 Spraying unit Screw diameter mm 105 Spray volume cm3 3850 Spray weight gr 3740 Spray pressure bar 1650 Dimensions and weights Dimensions LxWxH m 12.6 x 3.7 x 2.6 Machine weight Kg 89000 Other robot ENGEL ERC 73/1-ST Core pulling: 2 pcs Euromap 12
used
Manufacturer: GORBREX Model: TKV 512 New in: 2015 CNC Control: SIEMENS SINUMERIK 828 Location: our warehouse Rudniki - Poland Machine fully modernized and modified of SEDIN 1512. Machine with new electrical unit, new lubrication unit, painted, slideways regrinded, replacement of worn mechanical parts. Machine will be equipped with new CNC control SIEMENS SINUMERIK 828. Delivery time about: 2 months Technical details Number of columns: 1 Number of carriages: 1 Type of carriages: Rotary head in 5 position or ram Number of axis controlled: X/Z Turning diameter: 1 250 mm Table diameter: 1 120 mm Max. Turning Height: 1 000 mm Max.weight of workpiece: 3 200 kg Table speeds: 5-250 rpm Number of table speeds ranges stepless: 3 Vertical travel in Z axis: Rotary head: 700 mm Ram: 1000 mm Horizontal travel in Z axis: 775 mm Range of working feeds: 2-2000 mm/min Rapid fee ...
used
Main drive - spindle motor at 2450 RPM power - 4,5 kW spindle speed within four gears - infinitely variable speed range 20-4000, tool holder horizontal and vertical ISO 40 tool CLAMPING hydromechanisch 1200 daN, Quill stroke vertical fur 80 mm feed drive - single DC motors 1-2000 mm / min feed force in all axes each axis 5400 N, rapid traverse in all axes 5 m / mon workspace - along x axis 500 mm, cross y axis 360 mm, vertical z-axis 400 mm measurement - measurement of X, Y, Z - direct, resolution 0.001 mm, input gauge 0.001 mm, display step 0.005 mm, resolution 0.001 mm table AUFSPANNFLaeCHEN of rigid 4.Achse angle table 800 x 390 mm number and distance of T-grooves, wide T-slots 6/63/14 h7 NC rotary table 30 swivel 4.Achse - diameter. 380 mm control train control HEIDENHAIN TNC 115 / TNC 355 - screen screen - control SIEMENS 3 M4 810 M Kuhl installation - lubrication coolant - rinsing ...
used
Manufacturer Demag Type Ergotech 100-310 System NC4 Control NC 4 Built in 1995 Closing unit Closing force t 100 Opening path mm 500 Holm size mm 400 x 400 Installation height min/max mm 250/- Plate size 540 x 540 Spraying unit Screw diameter mm 35 Spray volume cm3 168 Spray weight gr 152 Spray pressure bar 168 Dimensions and weights Dimensions LxWxH m 4.1 x 1.3 x 1.8 Machine weight Kg 3820 Other
used
200.0 kW, max. 7.50 bar, 35.71 m3 rpm, built 1991, New screw in 1997 at 53000 operating hours. Engine: 380V/50Hz, 460V/60Hz
used
Built: 2003 Location: Germany Brand: TetraTop Model: TetraTop 170V Availability: instantly Technical details: Volume (ml): 1,000 ml, 750 ml, 500 ml Tray Type: TetraTop Flat Top Capacity: 9,000 cartons / h Filling machine TetraTop 170V, commissioning 2004, purchase contract 2003. The rated power of the machine is 9,000 EH /h. Formats: 1,000ml cartons, 750ml cartons and 500ml cartons mileage as of 31.08.2011: 13,772 operating hours. • 1x GSU for granulate transport • 1x granulate hopper • 1x HCCU for foam cleaning • 1x Volume adjustment type 190V converted to stainless steel cylinder • 1x 20 replacement cartridges • 2x tetraPak type Capper 20 screw-on machines for screwing on 38mm screw caps • 1x manual roller transporter for inserting the rollers into the ASU • 1x roller truck for roller transport • 1x retrofit air conditioner Rittal for ...
used
: Plant used separation / separation system Manufacturer: Schauenburg Type: MAB 200 Year of construction: 1991 1: mixture task box DN 150 Usage: for the slurry task on the average grading railway of the Schwingentwässeres Execution mixture task box: welded and bolted steel sheet construction with a 10 mm strong LINATEX lining and a removable, with 20 mm LINATEX baffle wall. Inlet port: DN 150 flange, born after DN 10 2: Schwingentwässerer type 1240 Machine number: 1127 Dimensions: Width 1200, length 4000 mm Execution: The sieve bin and the actuator yoke, welded and bolted steel construction with one-piece side, rear window, dropping snout rubberized. Drive unit: 1 double unbalance Exciter type S3, 1 drive motor 7,5 kW, 1000 rpm, design B3 3: screen surfaces Classification: single-track plan screening surface width 385 mm, stoma lengthwise in the direction of request, gap width ...
used
200,0 kW, max. 7,50 bar, 35,71 m3/min, Year 1991,new air end in 1997 with 53000 hours. Motor: 380V/50Hz, 460V/60Hz
used
75 kW, max. 7.5 bar, 12.2 m3 rpm, motor 380-420V/50Hz, 440-460V/60Hz
used
75 kW, max. 7,5 bar, 12,2 m3/min, Motor 380-420V/50Hz, 440-460V/60Hz
used
automatic CUTTING BORING and MOULDING machine BACCI TTF1 2TM . second hand machine working conditions : Excellent hydraulic drive of all the movements volt. 380/50 CE mark : YES Machine suitable for assembling part of chairs, tables, frames, furniture, wheelchair frames, etc. The BACCI TTF1 2TM performs the operations of cutting , milling and drilling at the end of the piece, either singularly or differently combined . the milling unit is composed of n.02 spindle moulders ( anti-splinter system ) machine composed by 3 working units : 1- Cutting unit : circular saw max.diam. mm.400 motor power Hp 3 2- Boring unit : boring head with 5 mandrins motor power Hp 3 3- Moulding unit . with automatic movement of the carriage on recirculating ball bearings n.02 spindle moulders (anti-splinter) motor power Hp 7,5 spindle diam. mm.35 hydraulic unit motor power Hp 2
used
Hot counter/ hot display case with 5 bays 650x700 (GN2/1) and 2 glass doors front and rear for handling and removal. The display case is in a very good, cleaned and functional condition. Undertable also available on request, can also be used as Bain-Marie. Technical data: -External size: 980x870x1020mm. -Indoor size: 5x650x700mm. -elek. Voltage: 230V -Frequency: 50 Hz -elek. Power: 3.5kW. -Serial Number: 100010826
used
OPERATING POSITION... HORIZONTAL PUMP SET SIZE . 90.1 CONSERVATION SILICONE OIL ROTOR . . . . . . . . . . . . . 1.2436 U80 STATOR . . . . . . . . . . . . . NBR-LM 778/60-ST MOUNT RINGS... 1.4571 TENSION ROD MATERIAL... 1.4301 JOINT MATERIAL... . V4A JOINT DESIGN... . CARDAN (PW) ABGEDIC. CUFF... NBR TISSUE JOINT OIL... White oil EXTRA SHAFT SEAL... SPECIAL VERSION SUCTION CASING... V4A SUCTION... DN100/PN16-V2A SUCTION LOCATION TOP GASKET... NBR OUTLET... . DN100/PN16-V2A DRIVE flange [mm]... 250 Drive shaft [mm] 40 SHAFT MATERIAL... V2A LINEUP SPECIAL VERSION PUMP PROTECTION... WITHOUT ROTATION LINKS PUMP IDENTIFICATION... CHEEKS NAMEPLATE... STANDARD SURFACE PROTECTION... STANDARD C1 FARBE . . . . . . . . . . . . . RAL 9006 WEIßALU DRIVE... STIRNRADGETR.MOTOR DRIVE GEARBOX TYPE SEW RF77 ENGINE TYPE... DRE100LC4 PERFORMANCE... 3.0 KW SPEED at 50 Hz [ ...
used
Function: The Bosch TFA 241 is a thermoforming machine fills liquid products in previously defined Cup sizes. First, the railway film with H2O2 is sterilized and then heated to a predetermined temperature. This temperature is reached, the slide in the next step will be deep. After the cups got their form, these are filled with product. Then, the upper rail slide with H2O2 is sterilized. Then, the filled Cup with the top track slide are welded and punched out before they are passed on a conveyor belt of the drain. Performance: 13,500 - 31,500 cups per hour Number of runs: 5-track and longitudinal runners current format: Ø 44 mm, height 15 mm maximum Cup size: Ø 44 mm height 29 mm Prefiller: Cleaning: CIP capable Mainfiller: -for liquid products -Manufacturer: Orlita -Dosing type: cold HD -Filling volume: 8-15 cm3 Disinfection: H2O2 Date of printing: Inkjet Dimens ...
used
THREE ROLL BLECHBIEGEMASCH. m. conical bending and in turn, used three rollers bending m/c with conical and prebending, used Typ / type: UBBDA 32 x 2000 Manufacturer / make: heavy machinery Wildau Baujahr/ new: 1984 Workspace, sheet width max. / maximum working length: 2000-.2100 mm maximum sheet thickness maximum sheet width rounding (cold) / Max sheet thickness at max.working length at bending(cold): 32 mm (270 MPa) On bending (cold) /. at prebending(cold): 23 mm Smallest sheet metal thickness maximum sheet width /. min. sheet thickness at maximum working length: 4 mm Bending rolls / bending rollers: top: 1 piece, bottom: 2 PCs Driven / driven: 2 bottom rollers / bottom rollers upper roll diameter / diameter of top roller: 382 mm Under Roll diameter / diame ...
used
Water-cooled grinding spindle motor for JUNKER Quickpiont 13.5 kW ,380/660 V ,25/14.5 A ,2940 rpm ,50 HZ
used
1 of used TRANSVER 180-degree Powered Belt Bend - oversized, type KR1-SP, new 1993. Operates counter-clockwise. Outside radius of frame 2.154 mm, end rollers diameter 14 + 50 mm. Conveyance height 1.250 mm (± 50 mm), inside radius of belt 1.104 mm. Belt width 800 mm. Belt speed at radius 1.504 mm 30 m/min. With SEW Variomot drive, 380V/50Hz. Color RAL 1015 bright ivory.