flow forming used for sale

Flow sensor, for connection to an evaluation unit IFM ELECTRONIC SF220A SFR14ABB/US/2G rod length: 12 mm medium temperature: -20 - 70 °C compressive strength: 30 bar process connection: G1/4 ( inches, male thread ) connection device plug: M12 x 1, 4-pole Material: stainless steel New, with underlays ! Dimensions (sensor): 52 x 19 x 17 mm Dimensions (packaging): 165 x 90 x 65 mm

Flow sensor, for connection to an evaluation unit IFM ELECTRONIC SF5200 SFD10ADB /US-100 rod length: 45 mm medium temperature: -25 - 80 °C compressive strength: 300 bar Process connection: M18 x 1,5 ( female ) connector device plug: M12 x 1, 4-pole Material: stainless steel New, with backings ! Dimensions (sensor): 82 x 25 x 22 mm Dimensions (packaging): 95 x 65 x 30 mm

Item condition: well-maintained Availability: immediately Power ratings: 400 V, 3N, 50 Hz, Control voltage: 230 V Nominal current: 27 A Condition: in working order Availability: as of now

Power ratings: 400 V, 3N, 50 Hz, Control voltage: 230 V Nominal current: 27 A Condition: in working order Availability: as of now

Horizontal flow-wrapping machine Pearl Servo D6133 for packaging chocolates and chocolate bars Dataflex 6230; 32 mm (LH) incl. - TTO Ultra black - Print head cleaning kit - Rotary encoder kit - Counter pressure roller 750mm long - Shaft for counter pressure roller - Universal frame - Language Kit - Clarisoft Ergonomic design: HMI and start/stop buttons have been ergonomically situated to facilitate accessibility. High speed and versatility: Up-to 160 cycles/min. with 2UP and capable of wrapping endless diffrent products in the food and non-food sectors. No mechanical drives: Drive motors are connected directly to the various assemblies. The electrical panel is housed inside the machine frame and protected from the external environment. Compact design, easy cleaning: Thanks to the cantilevered construction and the use of polymer moulded components with graceful radiuses ...

Delfin s.r.l. mobile flowpacker, model: Sirio 600, type: Gonf. Origl., serial number: A-314-05, year of construction: 2005, 400 V, 3 Ph, 50 Hz, 4.5 kW, weight: 700 kg, plastic infeed belt, belt width: 90 mm, seal length: 360 mm, film width: 225 mm, total dimensions: 5900 mm x 1400 mm x 1800 mm.

Description: '60 adjustable flower box holders 6 packages of 10 pieces Flower box holder adjustable 15 - 21 cm' Approx. Onsite Dimension. (l x w x h): 1,200 x 800 x 1,000 mm, weight approx.: 100 kg

- Capacity ca 4000 l/Std - Filtrationr appx; 20 mu - Filtration surface  - regular maintenance by the manufacturer  - all modules are fully working - immediately available More then 300 machines new and second hand on our seema .de

MF-25 Corner Forming Machine

Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request

Formingmachine for meat rolls (frikandellen afkorter) Belt width: 700mm With outfeedbelt

Thank you for your interest on our machines, we like this may offer you: Manufacturer: Sandeep Singh Model: KSF 800 marzipan & nougat transformer Year of construction: 1977 Working width: 800 mm Capacity: á 20mm - article 8 g - 180 kg /. Electr. Values: 230/400 V, 50 Hz Details: - with 17 different form rollers (!) -Suitable for large production volumes -Plastic rollers with steel core -Stepless speed control -with prior extruder and feed conveyor -For Marzipan and nougat mass We offer this machine "as available" without any warranty/warranty claims or representations for sale. from stock Hess. Lichtenau; bulk

Many thanks for your interest on our Drop Rollers for hard candy, please find follow our offer: Type : Candy roller/ Drop Roller for Hard Candy, hand driven roller size. : approx 58mm x 177 mm Packing dimensions : approx. 630 x 580 x 450 mm (lxwxh) (wooden box suitable for export) Net Weight : approx. 65 kg. Gross weight : approx. 95 kg. Different: with one set brass drop roll round/egg shape without structure, round 300 other types possible. For every roll you decide for size, or you can give us your own form, Also available machine with working table, electrical engine and gear box. We offer this machine in as-is where it is condition delivery time: According to the arrangement ex warehouse Hess. Lichtenau

Horizontal wire saw for profiling of EPS boards Programming of CNC cutting image Application for EPS, XPS, PUR rigid foams Plate length: 1000 mm Board width: 500 mm Thickness: 80-200 mm Interpretation for approximately 17 m ³ production quantity per hour installed cutting image: hacking folding Visits by appointment at any time. Other machines and components for the production and processing of foams are available.

Description Precise forming with quick tool changes. Our axial t form forming machines of type REB are specially suited with forming forces up to 1,300 kN and effortlessly master complex geometries. With up to six forming stages in combination with an intermediate clamping unit, they meet almost all requirements. The operation is simple and intuitive via touch panel. A sequence control makes every single movement of the respective forming stage user-friendly and individually freely programmable. Optionally, we equip our systems with electrical or hydraulic-numerical drives. For very short cycle times, these forming processes can be carried out step by step in transfer plants. The systems enable intuitive flow-based programming. Simultaneous axis movements ensure fast production processes and enable efficient and highly dynamic production. Technical data REB 660 6-60 mm . . .

automatic meat ball and fishball forming machine, beef balls, pork balls, fish balls, squid balls, 400-600kgs hour, 18-35mm diameter, stainless mobile frame, 3Ph

Gabler D600 Thermoformer, age 2000:- Unwind Stand Indramat Servomotor Indexing. Top & Bottom Heaters, total Capacity 73.9 kW Indramat Servomotor Forming Station Forming area: 600 x 320 mm Depth of draw neg./pos.: 40/15 mm Stacking and counting Station Counted/ Stacked Products transferred automatically to Delivery Conveyor Waste Material Winder Main Machine PLC Controller: Siemens SIMATIC S5 P3 3A Heater PLC Controller: Siemens SIMATIC S5 95U Operator Touch Pad Control Panel (OPC) : Siemens SIMATIC OP27 Machine has been refurbished in 2014, New set of Cams added during Refurbishment. Excellent Production Condition

Dough forming machine for small pastries MANOTRAD - manually operated - without electrics - mobile - optional with tin cart

Used ILLIG RDK 54 Thermoforming Line, Age 1995 Unwind Stand Indramat Servomotor Indexing Max. Film width 610 mm max. Thickness range 0.18 to 2.5 mm. Hardened Transport Rails, Double Heating, Heating Load 41.0 kW. Heaters move forwards automatically with pneumatic control Sheet Sag Control Form Area 550 x 400 mm Forming & Punching in Mold with integrated Steel Rule Die. Positive Draw 20 mm, Negative Draw 20 to 40 mm Trimming Force 50kN. Top and Lower Platens Moved by separate Indramat Servomotors Heavy duty Toggles on both upper & Lower Platen Stacking/ Counting Station Waste Material Winder Inline ILLIG RS75b Grinder with Sound Proof Housing & Controls. Suitable for PS, OPS, PP, PE, PVC etc.

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K, age 1989 Thermoformer with auto-start facility SEW Eurodrive Servomotor Indexing Max. material width 730 mm Max. Indexing length 300 mm Top & Lower heaters, total connected load top & bottom heaters 74.2 kW Drive Motor 6.93 kW Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Hydraulic Plug Assist, Max. Part height 125 mm Hydraulic Power Pack Control Cabinet with Optimised Schleicher (PLC) Controls Encoder on Main Shaft Auto Lubrication Pump. Inline ILLIG UG70b Counter/ Stacker Delivery Conveyor for Counted/ Stacked Cups with Ejector Table

Product number: 1588 Type: VM400HS Serial number: 1447 Capacity: 50 strokes/min. Pneumatics: 6 - 8 Bar Power: 3 x 380V, 50Hz, 7.8kW Dimensions: 2450 x 1000 x 2150 mm Weight: 810 kg With BVP bridge breaker in hopper

Product number: 1590 Type: VM400HS Serial number: 1698 Capacity: 50 strokes/min. Pneumatics: 6 - 8 Bar Power: 3 x 380V, 50Hz, 7.7kW Dimensions: 2150 x 1000 x 2150 mm Weight: 940 kg With bridge breaker in hopper

Kalmeijer pastry moulding machine KGM Table Model Pastry moulding machine Kalmeijer KGM with 10 plates and 2 moulding rollers. Pastry moulding machine is suitable for the production of mürbeteigen. With different moulding rollers, the pastry can be moulded into the desired (depending on the mould ingeu) roll. The dough feed and the moulding roller are neatly removable to clean them. The moulding roller can be heated by means of heating. Sheet metal feeder is automatic, the machine stops when there is no sheet metal on the trensport plate. Machine is compact and easy to use. Kalmeijer pastry moulding machine with 1 moulding rollers with 10 black baking sheets Table equipment with heating automatic sheet metal feeder thick of the dough figures is adjustable Dough hopper, moulding roller, dough feed roller is easily removable for cleaning Easy to use The trasnport beams for ...

Thank you for your interest in our new machines, which we can offer you as follows: Model: Roller embossing machine for hard candies with motor and starter Roller dimensions: approx. 58mm x 177mm Dimensions: approx. 500mm x 500mm x 350mm (lxbxh) Weight: about 100 kg. Details: with a set of brass preemine balls round shape (ball) without structure (pattern). You can choose one from our approximately 300 shapes and determine the size or you give us your own shape and size. The machines are handmade, smaller tolerances / deviations in the design or design, painting etc. are unavoidable and are irrevocably recognized when placing the order. Material certificates are not provided from hess warehouse. Lichtenau

Punching nibbling machine

Product number: 1832 Type: VM400/30 Serial number: 001 Belt width: 400 mm Capacity: max. 30 strokes/min Air consumption: 6 bar Power: 3 x 400V, 50Hz, 5.5kW Dimensions: 2000 x 800 x 1800 mm Weight: 550 kg

Product number: 1854J Type: NM-500 Serial number: 10062 Year of construction: 2013 Capacity: max 3000 kg/hr. Speed: 25 - 100 strokes/min. Belt width: 510 mm Hopper: 454 kg Forming width: 483 mm Stroke length: 228 mm Stack height: max 152 mm Forming pressure: 2.5 - 17.2 Bar Infeed height: 2000 mm Outfeed height: 850 mm Air pressure: 6 Bar, 28.3 L/min. Water: 2 Bar, 3.8L/min. Power: 420V, 50Hz, 32A Dimensions: 4600 x 1400 x 2850 mm Weight: 3650 kg With Tender-Form® and Paper interleaver Including lifter for 200L meat bins, 2 pc. tool trolley and several forming plates

Quark balls or spray pastries of the ball portioners are Serving small amounts of homogeneous masses for filling patisserie products in small-volume production,all in manual operation. Robust design, easy to clean. Dosing quantity infinitely adjustable. All parts in contact with the filling compound are made of stainless steel or food-grade plastic. with stainless steel stand Visit our Milbrandt Outlet with many machines and equipment!

Fronius magicwave 2600, with wire feeder can be used for the robot welding. Machine is in great working condition, equipped with longines controls, wire feeder and welding gun connections for the robots.

Product number: 1916J Type: NM-500 Serial number: 10032 Year of construction: 2012 Capacity: max 3000 kg/hr. Speed: 25 - 100 strokes/min. Belt width: 510 mm Hopper: 454 kg Forming width: 483 mm Stroke length: 228 mm Stack height: max 152 mm Forming pressure: 2.5 - 17.2 Bar Infeed height: 2000 mm Outfeed height: 850 mm Air pressure: 6 Bar, 28.3 L/min. Water: 2 Bar, 3.8L/min. Power: 460V, 60Hz, 26A Dimensions: 3300 x 1150 x 2500 mm Weight: 3650 kg

Unwind Stand Preheater ILLIG VHW 72/ 2 ILLIG RDM 70K (refurbished in 2003) Thermoformer with auto-start facility Indramat Servomotor Indexing Top & Lower heaters Auto Transport Rail Spreading for PP Sheet Sag Control Max. Forming Area 680 x 280 mm Pneumatic Plug Assist, Max. Part height 125 mm Control Cabinet with Optimised Schleicher (PLC) Controls Auto Lubrication Pump. Inline ILLIG ÜG70B Counter/ Stacker, with delivery conveyor Inline Grinder & Blower

power of 1.1 kW / 2,9A / 380V / 50Hz; the weight of a piece of 500 - 1200 g; productivity up to 1200 pcs / h; weight approx 280kg.

complete stainless steel Track width 600 mm Adjustable height of the finished product from 2 to 35 mm stepless speed (lower and top belt can be adjusted separately) with executable belt Mobile 0.5 kW Dimensions (L x W x H) : ± 2,250 x 1,000 x 2,100 mm

Can make meatballs and burgers up to 130mm in diameter. and height up to 30 mm; – The height can be adjusted; – Equipped with a speed controller; – Limit switch for more tape security; – Motor: 0.3 kW – Single-phase motor – Hopper capacity 24 l. Standard shapes: Round burgers with diameter: 22 mm. 32 mm. 40 mm. 65 mm. 100 mm. 115 mm. 130 mm. Round meatballs with diameter: 22 mm. 32 mm. 40 mm. 65 mm. Depending on the chosen thickness, a different weight of the final product can be achieved with one mold. Accessories: As standard, the machine comes with one mold. As an option, you can also order: Round burgers with a diameter of: 22 mm. 32 mm. 40 mm. 65 mm. 100 mm. 115 mm. 130 mm. Round meatballs with diameter: 22 mm. 32 mm. 40 mm. 65 mm.

Forming capacities Steel 2 mm Light metal 2.5 mm Stainless steel 1.5 Extension 340 mm Installation height 192 mm Working stroke 25 mm Working cycles 400 p/min. Tiltable 0 - 15o accessories: - 1 pc. tool Engine power 1.5 kW Country of origin Switzerland Machine Weight 330 kg Dimensions LxWxH 120 x 60 x 170 cm

complete set: DEMAG 50T ERGOTECH COMPACT 50-200 1999 (-) ENGEL 75T ES330/75 VICTORY 2001 (working hours 81694) working good tech. condition T557211 for both machines 10 000 EUR

M. No.: 3284 Equipment / Additional information: (min.) material thickness: 0.65 mm (max.) material thickness: 2 mm Technical Data: Width of film, max./min. 450/350 mm Forming area max. 430 x 160 mm Drawing depth max. negative/positive 6/20 mm (on request 22 mm negative) Top heater max. 10,15 kW Driving motors 3,0 kW Total connected load at 100 % duty cycle 12,7 kW Working air pressure 6 bar Air consumption (dependent on product) max. 1250 I/min Rate of water flow max. 1,0 m3/h COMPACT AND ROBUST - giving continuous high output. Easy and ergonomical operation (e.g. take- off height 1300 mm). QUICKLY CHANGEOVER - from 30° to 90° foil feed giving maximum material utilisation for both square and round lids. Heater changeover problem-free. PRECISION - The accuracy of the form table movement is guaranteed by linear guide bearings and hardened rods. The safe ...

Sheet metal profiling line was built in 2017. Equipment: – profiling machine – guillotine – control system – hydraulic press with an aggregate

Sind Hamburger forming machine

Line for forming cevapcici and cevapi (grinder with mixer, portioning device and belt transporter)

ILLIG STAL80 Trim Press, age 1988:- Technical data ILLIG STAL 80 :  Punching table area max. 1000 x 510 mm  Material width max. 800 mm  Infeed length 20 - 400 mm  Stroke height 200 mm  Mold height 272 mm Part height (positive and negative) max. 100 mm  Number of strokes (infinitely variable) 25 - 130 /min Trimmed Parts are stacked through the Punch Tool The Skeletal Waste is fed directly into the Grinder ILLIG RS75 Under the Trim Press Grinder, Motor 8.3 kW, age 1995

sheet width: 480 mm plate thickness: 3 mm stations: 13 total power requirement: kW weight of the machine ca.: 11 t dimensions of the machine ca.: 15,x2 m Number of stations 13 Number of straightening stations 1 Waves 60 mm Center distance, horizontal 310 mm Center distance, vertical 110 - 250 mm Speed approx. 11 m / min. Connected load approx. 20 kW Uncoiler (without drive) - Coil- , inside 508/610 mm - Coil weight 3 t Flying hydraulic scissors Roller set for hat profile The techn. Data is manufacturer or operator information and therefore for us not binding. We reserve the right to make an interim sale, it applies exclusively our business and conditions of sale. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Combination machine Manufacturer Mubea Type KBL100 5-fold combined Flat steel shears 150x19mm Profile steel shears e.B angle iron 160x7mm or 100x12mm Bar steel shear 70mm round Hole punching Jack 16mm All information to the best of our knowledge, but without guarantee!

Janssen Moulding Roller for K12 K600 pastry forming machines Diameter: 58.5 cm

Janssen Moulding Roller for K12 K600 pastry forming machines Diameter: 58.5 cm

Janssen Moulding Roller for FM128 K4 pastry forming machines Diameter: 23,9cm

Kalmeijer Forming Roller for Kalmeijer KGM machines Overall Length: 47cm Roller: 25cm

Kalmeijer Forming Roller for Kalmeijer KGM machines Overall Length: 47cm Roller: 25cm