flow form used for sale

Waterjet cutting machine Type: Mach 500-4030 DWJ XD Manufacturer: Flow Year: 2019 Operating hours: 1300 3D Cutting Cutting material up to 50 mm thick Machine working area 4 x 3m Materials suitable for cutting: All types of metals Steel – all types Glass Natural and synthetic stones – e.g. granite, marble, ceramics, tiles, paving Building materials – e.g. brick, concrete Wood Rubber, insulating and sealing materials, e.g. Teflon Ceramics, tiles, paving, laminate Lexan, Plexiglas, hard plastics Machine in very good condition, fully functional, under power Find more here - / Contact us at -

Inv. Num. : 9209 Type: Mach 2 2031b Producer: FLOW Created: 2015 Parameters: Operating hours: 7490 h Work table length: 3000 mm Work table width: 2000 mm Pump: Pump Hyplex Prime 30 Equipment: Water pretreatment unit In 2023, a full inspection of the ball screws and linear guides was carried out. Due to this inspection, the Y-axis has been overhauled (the other axles are fine).

General SKU300P640 MakeNiro (manufacturer plate is missing) TypeFlex-XE-060-2/1:0 Year of constructionUnknown LocationBarneveld Main Features MaterialStainless steel Motor0.55 KW Surface1.4 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surface1,4 m² Bed sizes1900x750mm Product inlet600x450mm Product outlet330x200mm Number of sections:3 Air inletdia. 310mm (3x) Air outletdia. 500mm Vibro motor3x Motor0,55 kW 230/400 Volt MaterialStainless steel 1.4306 (304L) With jacketcheck General Floorspace2,8x1,6m Total height3,6m Weight2000 Kg Extra SpecificationsThis is a Conti Fluid Bed Dryer/Agglomerator (Granulator). The powder flows inside in a sort of zig-zag pattern, guided by internal baffle plates and supported by accordingly directed Conidur bottom sieve plates. Therefore the machine is much compacter and not as long and narro ...

A Flow Europe CNC waterjet cutting system is available. Working dimensions X/Y: 3600mm/2000mm, continuous operating pressure: 3800bar, pump type: Flow HyPlex 50, operating hours: 4342, major pump maintenance at: 4102h, control system: Flow Master-PC, module version Path/Cut/FlowNest: 6.0. Including clamping and fixturing device, Flow setup and positioning aids with laser pointer, light barriers, sand silo, Flow mixing unit, water softening system, new pump maintenance kit, various spare parts, and all piping and cables. The collision sensor has a defect. Documentation vorhanden. An on-site inspection is possible.

Dont miss a drop with this impulse digital water meter, designed to accurately track your water discharge. Heres why its a must-have for your drainage installation:, Insight: With this digital water meter you have immediate insight into the amount of water you are pumping. No more guesswork, just accurate information., Easy Installation: No more hassle with complicated installations. Our digital water meter can be easily installed, so you can immediately benefit from the benefits., Dont wait any longer and choose our digital water meter today., Contact us for more information and find out how you can start measuring flow!, , = More information =, , Year of manufacture: 2024, Colour: Grey, Connector size: 4 Cardan, Quick coupler system: Yes, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerent ...

flow meter (portable, in casing) with quick couplings 4 Cardan female (cup/lever) and male (ball) inpeller outside waterflow. With test sticker and certificat, EPA marked, , Field of application: Construction, Applicable material: Water, CE mark: yes, General condition: very good, Technical condition: very good, Visual appearance: very good, , = More information =, , Year of manufacture: 2025, Applicable material: Water, Technical condition: very good, Visual appearance: very good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.nl or call +31(0)55-3125902., , Do you have a question about an advertisement, drill, pump, part, or order? Or would you just ...

BBA Handy 4 mechanical water meter DWI (overhead wheel), equipped with M- and V-part 4 system C (interchangeable with gimbal). Ultra lightweight, stackable, and lockable. Weight 16.1 kg, , Mechanical DWI, The DWI water meter operates using an overhead wheel inside the measuring tube. This allows for a large passage of dirt particles in the liquid, but the measuring tube must be filled for an accurate measurement., , Handy water meters, Water metering is a standard part of daily operations for many pump professionals. In some countries, it is even mandatory to measure how much water is pumped from A to B or how much groundwater is extracted from a specific area., , The Handy water meters from BBA Pumps are specially designed for use on mobile pumping systems. The combination of light weight, carrying handles, and ergonomic design makes these water meters ideal for field use. Each portable ...

MF-25 Corner Forming Machine

Intelligent transport systems Brand: Formetal Type: diverse Wehrmann offers tailor-made transport systems for a wide variety of requirements. No matter whether it is about the transport of carcasses, single plates or stacks. For every transport task, however unusual, there is the optimal system, with a superordinate control that can recognize parts, send them on the right journey and integrate the connected machines. Roller conveyors, chain transports, webbing systems, link belt conveyors, turning stations, carcass erectors, carcass turners, etc ... All of these transport units, which are tailored to your requirements, are provided with a current touch-panel control computer, via which a complex line can be centrally and simply controlled. With a perfect design and tuning of the mechanical components, with a frequency-controlled speed control, both high feed rates can ...

The machine could also be used as a transport belt conveyor. Transport input length 2.000 mm Transport output length 1.000 mm Transport width 600 mm Working height 500 - 700 mm Transport speed 7 - 35 m/min.

New stack turnover machine Brand: Formetal Type: RT.180 PL Technical data: Usable width of roller conveyor: 1.000/1.200 mm Length of roller conveyor: 3.300 mm Min. stack height: 1.150 mm, max. stack pelhöhe: 1.600 mm Min. stack width: 300 mm Max. stack length: 3.000 mm Max. stack weight: 2.800 kg In- and outfeed roller conveyor - Roller Ø 89 mm - Distance between roller 190 mm - Drive with fix rotation speed motor 10,5 m/min. - Installed electrical power: 5,0 kW - Pneumatical door opening system - Stack turner RT.180PL 1000 Max. stack width: 1.000 mm Working height (for roller conveyor width 1.000 mm): 250 mm - Stack turner RT.180PL 1200 Max. stack width: 1.200 mm Working height (for roller conveyor width 1.200 mm): 400 mm

The BIRO F2000N, F3000N, F4000N & HD3000EHN Food / Patty Forming Machines are designed for production of a wide variety of meat and food products, with maximum production output capability from approximately 2000 to 4000 formed products per hour. A large number of drum mold die shapes are available. They vary from the standard round shapes of different diameters to special shapes such as square, oval, rectangle, fish, cutlet, heart, chicken leg, chicken nuggets, rabbit, bone, tree, pork chop, etc.

Pastry Forming Machines Forming Rollers 5 pieces we have in stock Dimensions 58.5cm x 12.5cm Details see picture

Formax ULTRA26 Former  The ultimate burger machine Suitable for forming a broad range of meat, poultry and non-meat products. It is commonly used by high-volume processors to form popular products such as burger patties, pork sausage, chicken fillets and chicken nuggets. Delivers precise weight and shape control while forming products with a natural texture and excellent appearance.

Met RoboHelix-machines kunnen spiraalvormige schoepen worden gevormd uit standaard ronde of van een patroon voorziene werkstukken. RoboHelix-machines vereisen uiterst nauwkeurige synchrone bewegingsbesturing. Door de gebruiker gegenereerde gegevens worden vanuit cloudgebaseerde software, HelixNinja, naar het apparaat gedownload. Deze informatie wordt vervolgens verder verwerkt om coördinaten in het 3D-vlak te genereren, waarmee het proces van het creëren van een vliegtuig vanuit een blanco basis wordt nagebootst. De motoren volgen synchroon deze coördinaten om het vliegtuig te produceren. Met de elektronische nokkenplaatfunctie in TwinCAT NC Camming (TF5050) is relatieve synchrone beweging overal en altijd mogelijk. Afmetingen en toleranties zijn geen probleem meer zodra de motoren en aandrijvingen zijn gekalibreerd. De tweede generatie RX250 uit de machinelijn van RoboHelix heeft een ...

Deze spiraalvormige bladenvormmachine is een koudwalsmachine voor het continu walsen van spiraalvormige bladen uit stripstaal. Door de parameters aan te passen (walsoffset, invoerhoogte, walsdruk, geleidingswiel, enz.) kunnen bladen van diverse specificaties worden gewalst.

FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Machine number: VM 600 HS-481 Power supply: 380 V, 45.47 A, Ph 3, 50 Hz Power: 22.09 Kw Weight: 1675 Kg Conveyor width: 600 mm Dimensions: 2400 x 1300 x 2100 mm Different formats available

FORMING MACHINE KOPPENS, MODEL: VM 600 Technical description: Serial number: VM-600-55 Power supply: 415 V, 3 Ph, 50 Hz, 23 A Power: 11,31 kW Conveyor width: 600 mm Form size: (7x) 60 mm Weight: 850 Kg Dimensions: 2000 x 900 x 1950 mm

FORMING MACHINE KOPPENS, MODEL: VM 600 HS Technical description: Serial number: VM 600 HS-281 Conveyor width: 600 mm Weight: 1.750 Kg Power supply: 380 V, 3 Ph, 50 Hz, 45 A, 22 kW Dimensions: 2400 x 2100 x 2200 mm

FORMING MACHINE, KOPPENS TYPE: VM 400 Technical description: Serial number: VM 400/30-1517 Power supply: 380 V, 3 Ph, 50 Hz, 4,94 kW, 12.39 A Weight: 550 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2400 x 680 x 2270 mm

FORMING MACHINE, KOPPENS TYPE: VM 400 HD Technical description: Serial number: VM400 HD-1717 Power supply: 380 V, 3 Ph, 50 Hz, 7,67 kW, 16.57 A Weight: 830 kg Mesh belt conveyor Conveyor width: 400 mm Dimensions: 2000 x 950 x 2350 mm

FORMING MACHINE KOPPENS, TYPE: VM 400 HS Technical description: Serial number: VM 400 HS-1481 Power supply: 380 V, 3 Ph, 50 Hz, 23 A, 7,77 kW Weight: 810 kg Dimensions: 1900 x 900 x 2200 mm

FORMING MACHINE, FORMAX TYPE: PFM-19 Technical description: Serial number: 416 Power supply: 380 V, 3 Ph, 50 Hz, 27.6 kVA, 42 A Conveyor width: 550 mm Format diameter: (3x) 120 mm Dimensions: 3000 x 1000 x 2700 mm The Fl9s hydraulic injection forming system offers extremely accurate weight control and the ability to manufacture a wide range of products at different temperatures. It achieves high performance and forms products with a natural texture and excellent appearance.

Belt width: 510 mm, Capacity: 25 - 75 strokes/min., Hopper: 240 kg, Mould: oval, (6x) 91x69 mm, Power: 3 x 400V, 50Hz, 22kW, Dimensions: 3700 x 1350 x 2600 mm, Weight: 2150 kg

bushing cut-off , PKO , IFO , 2 forma packs , PNP Transfer diameter range 8,5-22 mm number of dies 7 number of stations 8 cutting length 4-67 mm shaft length under head 4-75 mm output - pieces/min 175 press power 200(126) to max. outside dia. of round pie 42 mm

Form-on Quick-acting Clamp RU †compatible with Doka Framax/Ringer Master - your strong partner on site 🔧   When it comes to connecting frame panels, you need a solution that is fast, safe, and hassle-free. That’s exactly what the Form-on Quick-acting Clamp RU delivers. Thanks to its smart design, it grips flexibly into the continuous recess of the frame profiles †at any position you need. This saves you valuable time and gives you maximum freedom during assembly. ⭐   The integrated wedge is secured against falling out. For you, this means less risk, more safety, and noticeably easier handling. That way, you can complete your formwork tasks efficiently, reliably, and without unnecessary interruptions. 🚀   And because you deserve not only quality but also great value, we deliver the Form-on Quick-acting Clamp RU in a practical packagin ...

Form-on multi function clamp - compatible with Doka Framax/Ringer Master  †strong, versatile, reliable 🚚   With the Form-on multi function Clamp , you can connect your frame panels in no time. It provides tension-resistant and stiffening connections †whether it’s element, adjustment, or extension connections. This allows you to work safely, stably, and flexibly on the construction site. ⭐   The galvanized surface reliably protects against corrosion, while the practical 40 cm length ensures a perfect fit for your formwork solutions. 🔧   And because we know you value efficiency, we deliver the multi function Clamp in a practical packaging unit: 🚚 100 pcs in 1 MWC   With the Form-on multi function Clamp, you choose quality that lasts †and a tool that makes your job site smarter. 💪 Price: from € 3 ...

mould set 0.5 lt for blow moulding machine SIDEL SBO 16 series 2

42 x SFS smart prop plus 20-350 new â 36,20EUR/St â?¬1520,40 = NET 1 x Doka stacking rack new 130,00EUR Unlimited quantities / construction support also available separately Prices exclusive VAT and transport -Tragkraft min. 20 kN at any extended length (according to German approval Z 8,311 946) Maintaining the value of the supports for many years thanks to high-quality manufacturing and galvanizing -schnelles and safe release of the clamped support through optimized thread pitch European Community product, produced according to DIN 1065 tap-proof works thanks to crushing and resiliency issues like at 0049 176 70044689 Mr. Becker

Formaco meat former press Model: FLL800/160/1 Serial: 1100 2002, Stainless, Meat former press

Weibert form7-75 Edge sanding machine infinite angle adjustment (0 ° 90 °) vertical and horizontal loop with oscillating abrasive belt (good stock removal) spring loaded clamping device for belt Diameter of the grinding roller rubberized 80 mm Belt: 2260 x 150mm Contact surface (graphite Edition) 170 x 820 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900750

Weibert form 7-85 Edge sanding machine Infinite angle adjustment (0 ° to 90 °) Vertical and horizontal loop with oscillating abrasive belt (good stock removal) Table height adjustment by Handwheel Spring loaded clamping device for belt Grinding roller diameter 80 mm Belt: 2510 x 150mm Contact surface (graphite Edition) 180 x 950 mm Table height adjustment 80 mm Suction nozzle D = 100mm Engine power 2,2 KW 400V 50 Hz G & pieces 5900850

We offer: Doka / Form-on smartPROPplus 20 550 new a 62.60€ / piece net Doka stacking rack 1.55 x 0.85m new 130.00€ ( 30 pcs in frame) Heavy load supports , galvanized DIN 1065 , at each extension length 20kn load -Load capacity min. 20 kN at each extension length (according to general building inspection approval Z-8.311-946) -Preservation of the value of the supports over many years thanks to high-quality production and galvanizing -fast and safe release of the clamped support due to optimized thread pitch -safe working thanks to squeezing and fail-to-back protection - They offer on 1 construction support ! If you have any questions, call Mr. Becker on 0176-700 44689 the sale and sale of scaffolding/formwork systems and construction machinery; Formwork restoration on fair terms. Company SFS Meisterbetrieb Andreas Becker e. Kfm., Tel. [07305-9562350],  ...

Form-on smartPROP 20 sF2 - 2,00 - 3,50m, new a 33,95€ net -low weight -long service life -safe working Your benefits: Effortless and fast work due to the low dead weight Preservation of the value of the support over many years thanks to high-quality production and galvanizing Safe working thanks to crushing and Failover Purchase and sale of scaffolding/formwork systems and construction machinery; Formwork restoration at fair conditions. Company SFS Meisterbetrieb Andreas Becker e. Kfm. Phone 07305/9562350, Fax. 07305/9562352 mobile: 0049 176 70044689 Mr. Becker Office/ warehouse address: Birkenstrasse 15 D-89185 Humlangen-Hüttisheim e-mail: sfsystemst-online.de Register court Ulm: HRA722943 VAT ID NO: DE279047055

Weibert form7 4-way combination machine Be hem length 2250 mm option: 2600 mm Cutting height at 90 ° / 45 ° 100 / 79 mm Cutting width on the parallel fence 820 mm Saw shaft speed 4000 RPM. Blade tilt 90-45 ° Planing width 300 mm 3 blade shaft Tersa Feed speed 7 m / min Max tool diameter 210 mm Max tool diameter retractable 180 mm Spindle speed 3500/ 7000 / 10000 RPM Spindle diameter milling - saw 30 mm Engine power 400 V / 50 Hz / S6 - 40% 3 x 5,0 kW -. Weight 525 kg G & pieces 5500309

Weibert form7 52 digital Dressing thickness Planer Planing width 520 mm Tersa 4 drum Dressing table length 2250 mm Planing stroke 1500 mm 90 °-45 ° Machine cast iron tables 7 KW (9,5 HP) 400V 50 HZ Thicknessing table 850x520mm Passage of 3 / 240mm Electrical height adjustment of the Thicknesser table 4 speeds 5 / 8 / 12 / 18 m / min Dual opening system of the tables to the rear Max depth of cut 5 mm Speed 5000 min/1 1-suction port 120 mm Weight approx. 700 kg G & PIECES 5503511

Formwork/Beam H20 Form-on smartBEAM 20 P new from 6,50 EUR/lm Form-on smartBEAMS 20P new, bridge made of phenolic resin glued hardboard, available in all lengths: Subject to sale Your benefits: - reliably high load-bearing capacity over the entire length of the beam due to the homogeneous web material - Secured component load-bearing capacity through mechanical strength grading and load test for 100% of the belts - consistent product properties thanks to high dimensional stability - multiple savings compared to squared timber due to higher load-bearing capacity with lower weight Carrier produced according to DIN EN and with German technical approval. The images listed are sample images All prices excl. VAT and transport Subject to sale For questions Mr. Becker under 0176700 44689 Purchase and sale of scaffolding/formwork systems and construction ma ...

continuous grilling line all stainless steel bottom contact grilling + hot air steam injection belt width 1.000 mm nett length 4.750 mm electrically heated 276 kW underplate max. 260°C air temperature max. 280°C belt washing system adjustable speed dimensions (l x w x h) : ± 6.600 x 1.500 x 2.300 mm

Dough rounder Dough rounders are devices that are used to shape the dough They are used in the bakery and confectionery industry They can be banded and spiral The spiral rounder uses a spiral to shape the dough The machine shapes the dough thanks to the aluminum cone and aluminum sleeves around which it spirals The dough that comes from the dough compartment falls into the aluminum inlet groove All surfaces over which the dough moves are coated with Teflon Thanks to the system with flour and optional blowing of hot or cold air on the grooves, the dough does not stick to the drum Working range: 100 - 800 gr Dimensions: 950 x 950 x 1520 mm Weight: 175kg Electrical power: 1.1kW

General features: Bread dough machine between 65 and 90 liters of water per 100 kg of flour The speed variator allows you to adjust the relative speed between the ranges to get the desired degree of rounding Suitable for pieces from 70g to 2200g Angle between two adjustable bars to adjust the size of the parts to be rounded Flour bowl Height-adjustable Rotating wheels for easy movement It can work with pieces of dough up to 1400g Adjustable rounding time controls the speed of one of the ranges Height-adjustable legs The angle between the two strips can be adjusted by a point A flour sprayer can be installed as an option Technical characteristics: Tape length: standard 1.7m Power: 1.1 kW Voltage: 380V 3N PE Weight: 250 kg

General features: Bread dough machine between 65 and 90 liters of water per 100 kg of flour The speed variator allows you to adjust the relative speed between the ranges to get the desired degree of rounding Suitable for pieces from 70g to 2200g Angle between two adjustable bars to adjust the size of the parts to be rounded Flour bowl Height-adjustable Rotating wheels for easy movement It can work with pieces of dough up to 1400g Adjustable rounding time controls the speed of one of the ranges Height-adjustable legs The angle between the two strips can be adjusted by a point A flour sprayer can be installed as an option Technical characteristics: Tape length: standard 1.5m Power: 1.1 kW Voltage: 380V 3N PE Weight: 250 kg

-Air conditioning from BS-40 -Exhaust fan to the correction of the fermenting Cabinet climate -Turret cutting head with pneumatic connection and Capacity for maximum 4 tools -Kaiserstüpfler with pneumatically driven, adjustable flour Shaker -Hanger drying -Ablegevorrichtung for Gärgutträter of the 3 euro sizes 400 Ã? 600 mm, 580 Ã? 780 mm, 580 Ã? 980 mm, maximum stripping length 1,000 mm -Insertion opportunity for proofing trays (standard links) -Fermentation freight carrier recording as a slot loading -Bypass belt pneumatic single - and extendible -Disinfection station -Screen control via touch screen -Operating side in direction of travel links

Technical data: -Drilling capacity in steel ST 60 28 mm -Drilling capacity in steel ST 60 32 mm -Spindle mount MT 3 -Right - left rotation -Drilling spindle stroke 150 mm -Spindle speed continuously variable 80-1170 U/min -2 feed 0,1 / 0,2 mm / Rev -Throat depth 290 mm -max distance table - spindle 780 mm -Table with 2 T-slots 480 x 400 mm -Height-adjustable via rack and pinion with hand crank -Drive: 400 V / 0.9 / 1,3 kW -Space requirement approx. B 600 x H 2100 X 900 mm -Weight approx. 420 kg -with:-coolant system -Keyless drill Chuck 1-13 - lighting

P119 - used approx. 28.8 m³ / 28,800 litres GF-UP tank / plastic tank, double-walled, flat bottom tank, in good condition. technical details: capacity: approx. 28.8 m³ / 28,800 litres material: double-walled GF-UP tank manufacturer: Formoplast dimensions: Ø approx. 3.0 m x total height approx. 4.5 m certification mark: PA-VI 312.002 (DIBT examination report not available) specific weight: 1.4 kg / L Used storage tank in good condition. The hull will be newly painted in dark green. Double-walled flat bottom tank, aboveground storage tank with various connections such as ventilation, feed, etc., lid on the roof. According to the age, traces of use are present. For media with a specific weight of up to 1.4 kg/L, the tank formerly contained iron(II) chloride. This container can be used as a storage tank for liquid feed, water, whey and many different media. Pric ...

continuous grilling line all stainless steel adjustable product height with lower and upper belt : bottom and top grilling independent temperature control below and above net length 1.800 mm belt width 600 mm electrically heated ± 90 kW belt washing system above and below adjustable temperature range per heating plate (6 pieces) capacity up to 250 kg/h depending on the product adjustable speed dimensions (l x b x h): ± 3.000 x 1.650 x 2.400 mm

General features: Bread dough machine between 65 and 90 liters of water per 100 kg of flour The speed variator allows you to adjust the relative speed between the ranges to get the desired degree of rounding Suitable for pieces from 70g to 2200g Angle between two adjustable bars to adjust the size of the parts to be rounded Flour bowl Height-adjustable Rotating wheels for easy movement It can work with pieces of dough up to 1400g Adjustable rounding time controls the speed of one of the ranges Height-adjustable legs The angle between the two strips can be adjusted by a point A flour sprayer can be installed as an option Technical characteristics: Tape length: long 2m Power: 1.1 kW Voltage: 380V 3N PE Weight: 320 kg

continuous grilling line grilling surface (w x l) : 600 x 7.500 mm bottom contact grilling + hot air (with flip-over) grilling time : 1 minute to 60 minutes belt width ± 600 mm electrically heated power : 2x200 A, 2x140kW, 3 x 400V, 50 Hz belt washing system adjustable speed overall dimensions (l x w x h) : ± 10.315 x 1.230 x 2.338 mm weight : ± 4.500kg

It shapes the dough, which is sheeted with the help of two polyamide rollers, at any length and thickness by the means of 2 or 4 cushions The roller can be adjusted between 0-30 mm without restriction There is a spring scraping mechanism made of stainless steel on the roller The dough can be shaped at 420 mm length thanks to the polyester woven and resistance increased long-life conveyor belt and adjustable roller group The folding chain and its component are made of stainless steel It has 2500 pieces of dough shaping capacity per hour and the feature of processing 100-1200 gr dough Capacity: 2500 pcs/h Dough molding weight: 100 - 1200 gr Number of the pressing board: 1 Number of rollers: 2 Width of conveyor belt: 400 mm Width: 650 mm Length 1: 2350 mm Length 2: 1850 mm Length of pressing board(s): 1100 mm Height: 1200 mm Height of dough entry: 1180 mm H ...

P181 - used approx. 40 m³ / 40,000 litres PE-HD-tank, plastic tank, flat bottom tank, double-walled with an outer hull. specifications: capacity: approx. 40 m³ / 40,000 litres material: PE-HD tank, plastic tank manufacturer: Formoplast Kunststofftechnik GmbH measurements: Ø approx. 3,49 m outside / Ø approx. 3,00 inside x height tank approx. 5,70 m / total height approx. 6,50 m mark of conformity: PA-VI 321.103 specific weight: 1,13 kg/L media: former chemical tank for formalin DIBT and media list available, suitable for AHL and ASL PE-HD tank, professionally cleaned and in good condition. Double-walled, i.e. with an outer hull, non-translucid, various connections such as ventilation, inlet, suction pipe, etc., lid on top of the roof. According to the media list suitable for many different chemicals e.g. iron chloride, hydrochloric acid, acetic acid, caustic soda, sul ...

It shapes the dough, which is sheeted with the help of two polyamide rollers, at any length and thickness by the means of 2 or 4 cushions The roller can be adjusted between 0-30 mm without restriction There is a spring scraping mechanism made of stainless steel on the roller The dough can be shaped at 420 mm length thanks to the polyester woven and resistance increased long-life conveyor belt and adjustable roller group The folding chain and its component are made of stainless steel It has 2500 pieces of dough shaping capacity per hour and the feature of processing 100-1200 gr dough Capacity: 2500 pcs/h Dough molding weight: 100 - 1200 gr Number of the pressing board: 2 Number of rollers: 4 Width of conveyor belt: 400 mm Width: 650 mm Length 1: 2350 mm Length 2: 1850 mm Length of pressing board(s): 630 + 450 mm Height: 1200 mm Height of dough entry: 1180 m ...