126,769 used machines on RESALE, but how to find them? Machine Search
Pressure:1600 t distance between columns:4100 mm slide stroke:1450 mm Distance table/ram, stroke up:2750 mm distance table/blank holder, stroke up:2200 Table surface area:4000 x 2200 mm ram pressure:1000 t Pressure of blank holder:600 t stroke of blankholder:1000 mm blank holder surface:4050 x 2200 mm Ram surface:3200 x 1650 mm pressure of drawing cushion in table:360 t Die cushion stroke in table:300 mm die cushion area:3500 x 1600 mm Side window:1100 mm Oil volume:9000 l Power capacity:390,0 kW Weight:250,0 t Dimensions (WxDxH):5,95 x 4,3 x 10,5 m Height above floor:8,6 m die cushion in table:hydraulic, controllable die cushion in ram:hydraulic, controllable
pressure:160 t throat:400 mm stroke:30 - 200 mm no. of strokes:50 /min distance table/ram, max. stroke up, adjustment up:600 mm table surface area:1000 x 770 mm table height over floor:810 mm hole in the table:360 mm Passage to the back:450 mm ram surface:710 x 450 mm ram adjustment:110 mm power requirement:15,0 kW weight:10,5 t Dimensions (WxDxH):1,7 x 2,0 x 3,2 m German Safety: permitted for manual loading:UVV 11.062 - VBG 7n5.1 clutch:hydraulic overload protection in ram:mechanical ram counterbalance:pneumatic
pressure:160 t distance between columns:1360 mm stroke:300 mm Distance table/ram, max. stroke up, adjustment up:620 mm table surface area:1300 x 900 mm table height over floor:950 mm side window:640 mm ram surface:1300 x 900 mm power requirement:45,0 kW weight:16,0 t Dimensions (WxDxH):2,5 x 2,1 x 4,1 m cutting impact cushioning:hydraulic
pressure:160 t throat:450 mm stroke:300 mm distance table/ram, max. stroke up, adjustment up:580 mm table surface area:1000 x 1000 mm die cushion capacity:20 t die cushion stroke:300 mm ram surface:700 x 750 mm feed down:400 mm/s feed up:400 mm/s table height over floor:1350 mm die cushion area:Ø 350 mm power capacity:55 + 11 kW weight:19,5 t Dimensions (WxDxH):1,5 x 3,5 x 4,6 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 drawing cushion in table:hydraulisch depth stop:mechanisch
Flott polisher; Solid design for professional use Auction-ID: A1-45170-95
With wooden work table 242x80x100cm LxWxH, to be disassembled
Intermediate flange for hydraulic pumps size 1 ORSTA TGL37069 hole spacing hydraulic pump: 72 x 60 mm bolt circle electric motor: Ø 165 mm New ! Dimensions: 170 x 170 x 90 mm
Pneumatic cylinder FESTO DSNU-20-160-PPV-A 19241 stroke: 160 mm rod diameter Ø 8 mm New ! Dimensions: 295 x 35 x 32 mm
Pneumatic cylinders, round cylinders FESTO DSNU-40-160-PPV-A 196036 stroke: 160 mm rod diameter: Ø 16 mm pmax: 10 bar New ! Dimensions: 420 x 50 x 75 mm
Condition: Good Model : HFW-160 T5 STD Brand: Himoinsa Power : 127,4 KW /159 KVA Engine: Iveco FPT 6 cylinder turbo diesel. Year of Make: 2014 RPM : 1500 U/Min. Frequency : 50 Hz Voltage : 230/400 volts Auction-ID: A1-46031-9
28 Fields pallets shelving (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -29 Stand / 112 traverses -Traverse length 2.70 m - load per level 2.4 tons -Shelf height: 4.50 m depth 1, 05 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory be 450 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. Commercial customers f ...
28 Fields pallets shelving (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -29 Stand / 112 traverses -Traverse length 2.70 m - load per level 2.4 tons -Shelf height: 5.00 m depth 1, 05 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory amounted to approximately 550 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email. ...
28 Fields pallets shelving (used) -Various manufacturers such as Fa.Polypal-Dexion Metalux Jungheinrich -29 Stand / 112 traverses -Traverse length 2.70 m - load per level 2.4 tons -Shelf height: 5.50 m depth 1, 05 m -removed / reverse loading done Artkelstandort: Bavaria (room Rosenheim) / Germany / Hessen, Germany (room Fulda) / Germany / Tirol / Austria Intermediate sale is reserved ______________________________________________________ Freight / delivery Current obligation estimated about freight costs for the German Federal territory amounted to approximately 550 euros. For our customers we offer a low-cost, reliable carrier who delivers the goods at a most affordable price. For the 1:1-we vouch for us passing the dispatch or shipping costs. Self pick-up possible - by appointment. Delivery time approx. 2 weeks Shipping throughout Europe after consultation and confirmation email ...
Kragarmregal, double-sided, 4,16m height, 1.20m arms, 500kg per arm - NEW - : Price from location incl. loading! 1 shelf unit with 4 pcs 1.850.-EUR (net)! A Kragarm shelving system, hot-dip galvanized, consisting of: 4 shelves double-sided approx. 4.16m high, hot-dip galvanized IPE 160 / 80 with 2x3 each. Arms 1.20 m, 500kg load capacity per arm with verbatim approx. 1.30 m shelf divider approx. 4160mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoes-adjustable shelf arms carrying ability at load centre 600 mm 500 kg per arm / 2250kg per stem with laengs and diagonal connectors e = 1300 mm for a shelf row with 4 stems approx. 4000 mm long with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us! photos of an old shelf!; New
Kragarmregal, one-sided, 4,16m height, 1.20m arms, 750kg per arm - New goods - : Price from location incl. loading! 1 shelving unit with 4 pcs 1.450.-EUR (net)! A Kragarm shelving system, hot-dip galvanised, consisting of: shelf divider on one side approx. 4160 mm high, hot-dip galvanized foot and arm depth 1200 mm with 3 hoe-adjustable helving arms carrying ability at load centre 600 mm 750 kg per arm / 2250 kg per stem at 4 staenders per arm level 4 x 720 kg = 3,000 kg with lashings and diagonal connectors e = 1300 mm for a row of shelves with 4 stems approx. 4000 mm with all screws and nuts, without bottom anchors. Other configurations (frame height, armrails, arm types, etc.) can be used! Please contact us!; New
silo, bulk material silo, gravel silo, sand silo, storage silo, aggregate silo used Manufacturer: unknown Volume approx. 1500 - 1600 m3 27 individual chambers each approx. 2.2 x 2.2 m (one of them staircase) Silo Material: Steel Square Total dimensions: approx. 20 x 9 x 15 m We have various silos in different sizes made of a large mortar and plaster mixing plant. Of course, also various other components, such as filters, elevators, weighing containers, screws... Changes and errors in the technical data, information and prices as well as prior sale reserved.
Motion06 angled-belt conveyor 30° 1615-1150-1050 RA1338 Exhibit Make: Motion06 Year of manufacture: 2017 Inlet angle: 30 Length: 1830 mm angle inlet and 700 mm full width, total length 2530 mm Belt width (RB): 1050 mm ( 20x 40 mm ) Frame height: 150 mm Nominal/external width (NB): 1150 mm Adjusted height: 560 mm Conveying speed: V230/400 kW 0,75 Overall height side wall: 300 mm Scope of delivery: with motor, supports and side guides (if required, please ask) Features: Construction year: 2017 scope of delivery: including supports and side guides angle: 30° KW: 0,75/S1 Electric data: 220-240, 380-400 condition: Ausstellungsstück Antrieb: SEW Getriebemotor Optional erhältlich: Frequenzumrichter Conveying length in mm (NL): 1615 Frame width in mm (NB): 1150 Belt width in mm (GuB): 1050 Bauhöhe in mm (BH): 150 For individual, expert advice, simply get in touch with us. Simply contact u ...
Motion06 angled-belt conveyor 30° 1615-1150-1050 RA1337 Exhibit Make: Motion06 Year of manufacture: 2017 Inlet angle: 30 Length: 1830 mm angle inlet and 700 mm full width, total length 2530 mm Belt width (RB): 1050 mm ( 20x 40 mm ) Frame height: 150 mm Nominal/external width (NB): 1150 mm Adjusted height: 560 mm Conveying speed: V230/400 kW 0,75 Overall height side wall: 300 mm Scope of delivery: with motor, supports and side guides (if required, please ask) Features: Construction year: 2017 scope of delivery: including supports and side guides angle: 30° KW: 0,75/S1 Electric data: 220-240, 380-400 condition: Ausstellungsstück Antrieb: SEW Getriebemotor Optional erhältlich: Frequenzumrichter Conveying length in mm (NL): 1615 Frame width in mm (NB): 1150 Belt width in mm (GuB): 1050 Bauhöhe in mm (BH): 150 For individual, expert advice, simply get in touch with us. Simply contact u ...
Transnorm belt curve conveyor GKF 3900-750-550 IR850 RA1382 The Transnorm belt curve is in good condition (used) and fully functional. It has a gear motor of the brand SEW. Supports and are not included in the scope of delivery. They are optionally available on request. Belt curves are often used in intralogistics for the internal transport of unit loads and are indispensable in modern distribution centers. Transnorm belt curves convince with performance and reliability. Thanks to a low-tension drive over the entire belt width, long operating times are no problem. Conical drums and a specially developed belt guide system ensure the highest possible running smoothness. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Type designation: Belt curve conveyor TS 1600-105 Conveying length middle radius (NL): 3900 mm Frame wi ...
Beam claw, sheet metal clamp, sheet metal claw, beam clamp, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span width: 160-254 mm -Load capacity: 4000 kg -Number: 1x terminals available -Price: per piece -Weight: 11 kg
Frequency converter, frequency converter, drive converter, controller, variable speed drive -Manufacturer: Flender -Type: 2 GR200/230 -Input: 380 V 50 Hz -Output: 165 V 300 Hz -Power: 26 KVA -Dimensions: 1300/560/H380 mm -Weight: 390 kg
Gear motor electric motor Electric gear motor -Speed: 165 rpm -Power: 0.33 kW -Construction: B5 angle -Diameter shaft: 15 mm -Protection class: IP 44 -Price: per piece -Number: 1x available -Dimensions: 360/180/H190 mm -Weight: 11 kg
Light barrier, safety light curtain -Protective field height: 1650 mm -Protection class: IP 65 -2x receiver photocell type: C40E-1603CA010 -Price: per piece -Dimensions: 1780/40/H50 mm -Weight: 7 kg
Three-phase motor, electric motor -Voltage: 220 V -Power: 0.06 kW -Speed: 1600 rpm -Shaft: Ø 9 x 20 mm -Construction: B3 -Protection class: IP 54 -Dimensions: 195/155/H155 mm -Weight: 4 kg
Gear motor, electric motor -Motor comes from: Gansow scrubber dryer -Connection: 24 volts -Speed: 160 rpm -Power: 1 kW -Shaft diameter: Ø 25 mm -Number: 8 available -Price: per piece -Dimensions: 390/140/H160 mm -Weight: 13 kg
Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Input: 380 V 2.4 kW -Output: 165/110V 294/194Hz -Power: 3/2 kVA -for: edgebanders, edgebanding machines -Dimensions: 680/360/H290 mm -Weight: 78 kg
Hydraulic vice, machine vice, hydraulic vice, high pressure vice, hydraulic vice -Sale: as a spare part carrier -Jaw width: 160 mm -Back height: 50 mm -Span width: max. mm -Lower part: 1 -Dimensions: 330/550/H160 mm -Weight: 47 kg
Used Sigma Profile S 160 Secondary Beam Girder Purlins Steel Beam Length approx. 1.235 mm - 160x60x2mm Properties: - Length: 1,235 mm - Profile: approx. 160 x 60 mm - Thickness: 2 mm -Galvanized Scope of delivery: - 1 profile approx. 1,235 mm Information without guarantee Properties: Length: 1.235mm Tread depth: 160mm Profile width: 60mm Material thickness: 2mm
Electric motor, three-phase motor -Power: 0.55 kW -Speed: 1655 rpm -Shaft: Ø 19 mm -Construction: B3 -Protection class: IP 44 -Number: 1x available -Price: per piece -Dimensions: 275/195/H156 mm -Weight: 9 kg
Used Sigma Profile S 160 Secondary Beam Girder Purlins Steel Beam Length approx. 1,200 mm - 160x60x2mm Properties: - Length: 1,200 mm - Profile: approx. 160 x 60 mm - Thickness: 2 mm -Galvanized Scope of delivery: - 1 profile approx. 1,200 mm Information without guarantee Properties: Length: 1,200mm Tread depth: 160mm Profile width: 60mm Material thickness: 2mm
Used Sigma Profil S 160 Secondary Beam Girder Purlins Steel Beam Length approx. 1.175 mm - 160x60x2mm Properties: - Length: 1,175 mm - Profile: approx. 160 x 60 mm - Thickness: 2 mm -Galvanized Scope of delivery: - 1 profile approx. 1,175 mm Information without guarantee Properties: Length: 1,175mm Tread depth: 160mm Profile width: 60mm Material thickness: 2mm
Used Sigma Profile S 160 Secondary Beam Girder Purlins Steel Beam Length approx. 2,620 mm - 160x60x2mm Properties: - Length: 2,620 mm - Profile: approx. 160 x 60 mm - Thickness: 2 mm -Galvanized Scope of delivery: - 1 profile approx. 2,620 mm Information without guarantee Properties: Length: 2,620mm Tread depth: 160mm Profile width: 60mm Material thickness: 2mm
geared motor, electric motor -Speed: 160 rpm -Power: 0.55 kW -Design: B5 -Shaft diameter: Ø 28 mm -Protection class: IP 44 -Number: 1x motor available Price: per piece -Dimensions: 470/160/H200 mm -Weight: 22 kg
Used Sigma Profile S 160 Secondary Beam Girder Purlins Steel Beam Length approx. 1,670 mm - 160x60x2mm Properties: - Length: 1,670 mm - Profile: approx. 160 x 60 mm - Thickness: 2 mm -Galvanized Scope of delivery: - 1 profile approx. 1,670 mm Information without guarantee Properties: Length: 1,670mm Tread depth: 160mm Profile width: 60mm Material thickness: 2mm
Bending tool, die, upper knife, upper tool, straight tool -Tool for: press brake -Tool as: die -Radius: R8 -Thickness: 60/25 mm -Drawing with the pictures -Total length: 569 mm -Total height: 176 mm -Weight: 30 kg
Used Sigma Profile S 160 Secondary Beam Girder Purlins Steel Beam Length approx. 1.270 mm - 160x60x2mm Properties: - Length: 1,270 mm - Profile: approx. 160 x 60 mm - Thickness: 2 mm -Galvanized Scope of delivery: - 1 profile approx. 1,270 mm Information without guarantee Properties: Length: 1,270mm Tread depth: 160mm Profile width: 60mm Material thickness: 2mm
Gear motor, electric motor -Speed: 160 rpm -Power: 0.25 kW -Construction: B3/5 angle -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Dimensions: 325/210/H195 mm -Weight: 13 kg
Gear motor, electric motor, electric gear motor -Speed: 164 rpm -Power: 1.5 kW -Construction: B3 angle -Diameter shaft: 25 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 480/190/H230 mm -Weight: 33 kg
Gear motor, electric motor -Speed: 160 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Number: 1x motors available -Price: per piece -Dimensions: 480/200/H240 mm -Weight: 27 kg
Three-phase motor, electric motor -Motor: is unused -Power: 160 kW -Speed: 2960 rpm -Shaft: Ø 65 mm -Protection class: IP 54 -Construction: B35 -Dimensions: 1190/920/H730 mm -Weight: 730 kg
Gear motor, electric motor, three-phase motor -Fan cover: defective -Power: 0.18 kW -Speed: 162.5 rpm -Hollow shaft: Ø 19 mm -Construction: -Protection class: IP 54 -Number: 5x motors available -Price: per piece -Dimensions: 240/1147/H150 mm -Weight: 5.9 kg
Gear motor, electric motor, three-phase motor -Power: 0.18 kW -Speed: 162.5 rpm -Hollow shaft: Ø 19 mm -Construction: -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 240/1147/H150 mm -Weight: 5.9 kg
Gear motor, electric motor -Speed: 160 rpm -Power: 0.37 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 33 -Weight: 23 kg
Gear motor, electric motor -Speed: 27/54/168 rpm -Power: 0.18/0.37/1.1 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Weight: 33 kg
Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 165 rpm -Power: 0.55 kW -Construction: B3 -Diameter shaft: Ø 25 mm -Protection class: IP 54 -Number: 3x motors available -Price: per piece -Dimensions: -Weight: 21 kg
maximum number of results exceeded
please refine your search
150 € 
