flott 16 used for sale

Manufacturer: Krauss Maffei Model No.: PrecisionMolding 160-750 Year: 2022 Condition: Used Stock number: 9405 Clamping force: 160 t Screw diameter: 50 mm Injection capacity: 393 cm³ Distance between uprights (horizontal): 570 mm Distance between uprights (vertical): 520 mm

Offer is a Weingarten crank press Type. ZS 1600.32 ex location for sale. The technical data can be found in the photos.

General SKU440X1398 MakeAllgaier-Werke TypeAVTM 1600/1 No.2380 Year of construction1981 LocationBarneveld Main Features MaterialMild steel/Stainless steel Surface1.8 m2 Sizes diameter1600 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface1.8 m² Number of sieve decks:1 Sieve sizesø 1600 mm With covercheck Inletø 145 mm Outlet2x ø 200 mm Drive vibro motorcheck Motor2,2 kW, 380 V, 1420 rpm With air cleaningcheck With brush cleaningcheck Tumbler screening machines MaterialMild steel, Stainless steel 1.4552 General Mounted on mild steel framecheck Floor space2,50 x 2,50 m Total height2,00 m Weight1000 kg Extra Specificationswith sieve ringFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubrica ...

Ultrasonic sensor, ultrasonic generator, ultrasonic transducer, ultrasonic plastic welding machine, ultrasonic converter, ultrasonic sonotrode -Ultrasonic sweat transducer: Ultrasonic vibration unit -Welding transducer/horn: Type R2003474 -Ultrasound sonotrode: -Quantity: 1x ultrasound transducer available -Dimensions: 515/160/H115 mm -Weight: 18.9 kg

Manufacturer: Precision X-Ray Model: X-Rad 160 XL Year of Manufacture: 2024 Run time: Approximately 80 hours, based on unit logs Machine type: X-ray irradiation system Input voltage: 1PH 230VAC, 50/60Hz FLA (Full Load Amps): 40 Amp Application: Used to irradiate semiconductor ICs for robustness testing to X-ray exposure Usage history: The project this unit was purchased for has concluded. It was found the exposure type could not be well quantified for future qualification needs, so the unit has not been used much recently. Condition: Fully functional, but displays error messages that do not clear during warm-up or irradiation. When this occurs the unit must be restarted, and it may take several attempts to complete warm-up and function. Cooling: The tube cooler is wall-mounted to save space, but can also be set on the floor.Hoses allow the unit to be positioned at least 10 feet  ...

General SKU440X1402 MakeAllgaier-Werke TypeTSM 1600/1 No.2577 Year of construction1983 LocationBarneveld Main Features MaterialMild steel/Stainless steel Surface1.8 m2 Sizes diameter1600 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface1.8 m² Number of sieve decks:1 Sieve sizesø 1600 mm With covercheck InletDia. 145 mm Outlet2x ø 200 mm Drive vibro motorcheck Motor2,2 kW, 380 V, 1410 rpm With brush cleaningcheck Tumbler screening machines MaterialMild steel, Stainless steel 1.4552 General Mounted on mild steel framelegs Floor space2,30 x 2,30 m Total height1,90 m Weight800 kg Extra Specificationswith sieve ringFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal fee ...

23 electric motors from various manufacturers are offered. 1) 4 × Innomotics 1AV3104A, power: 3kW, year of manufacture: 2024. 2) Hoyer HMA3-132S1-2, power: 5.5kW, year of manufacture: 2021. 3) 2 × Innomotics 1CV3073A, power: 0.55kW, year of manufacture: 2024. 4) WEG W22 02P71, power: 0.55kW, year of manufacture: 2023. 5) 4 × Siemens 1AV3205B, power: 30kW, year of manufacture: 2020. 6) WEG W22 160L-04, power: 15kW, year of manufacture: 2021. 7) FOA AC motors, power: 2.2kW. 8) 4 × WEG W22 100L-04, power: 2.2kW, year of manufacture: 2022. 9) VEM K21R 112 M 6-4 L H TPM140, power: 1/3kW, year of manufacture: 2022. 10) 2 × CEM TCE 80MCY 4 V1, power: 0.55kW. 11) WEG W22 06P90S, power: 0.75kW, year of manufacture: 2024. 12) WEG W22 160M-06, power: 7.5kW. Inspection possible by arrangement.

Max. saw blade diameter: 280 mm Pneumatic material tensioners Swivel table with detent points Minimum quantity spraying device Roller conveyors and length stops in different lengths on request

General SKU440X1403 MakeAllgaier-Werke TypeAVTM 1600/1 No.3080 Year of construction1988 LocationBarneveld Main Features MaterialMild steel/Stainless steel Surface1.8 m2 Sizes diameter1600 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface1.8 m² Number of sieve decks:1 Sieve sizesø 1600 mm With covercheck Inletø 145 mm Outlet2x ø 200 mm Drive vibro motorcheck Motor2,2 kW, 380 V, 1425 rpm With air cleaningcheck With brush cleaningcheck Tumbler screening machines MaterialMild steel, Stainless steel 1.4552 General Mounted on mild steel framecheck Floor space2,30 x 2,30 m Total height1,90 m Weight800 kg Extra Specificationswith sieve ringFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubrican ...

B&A REF: 9330 TON: 1600 SCREW DIAMETER: 175MM SHOT WEIGHT: 16042 STROKE VOLUME: 17438CM3 INJECTION PRESSURE: 1843AR PLATEN SIZES: 2250 X 2100MM DBTB: 1850 X 1400MM MIN MOULD HEIGHT: 700MM MAX MOULD HEIGHT: 1600MM MOULD OPENING STROKE: 2700MM MAX DAYLIGHT: 3400MM EJECTOR STROKE: 350MM CONTROLS: MC5 CORE PULLING: 4 AIR VALVES: 2 MOTOR: 200 HEATING CAPACITY: 191KW ROBOT: KRAUSS BEAM SERVO SCREW DRIVE: ELECTRIC

pressure: 160 t throat: 340 mm stroke: 20-120 mm no. of strokes: max. 45 Hub/min table plate: 1000 x 720 mm ram surface: 750 x 380 mm daylight: 330 mm weight of the machine ca.: 8,7 t dimensions of the machine ca.: 1270x2310x2595 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : 050233 : Jänner 2027, Zwischenverk : Taiwan : 87870 € : 1660.74 € : 1015 mm : 600 mm : 1000 x 400 mm : 1000 x 400 mm : 670 kg : 1100 mm : 5 - 25 m/min : 0 - 2.250 mm/min : 0,001 - 32 mm : 450 mm : 440 mm : 0 - 675 mm/min : 0.001 - 0.04 mm : 500 - 2.000 1/min : 5,5 kW : 1.5 kW : 1.1 kW : 1.1 kW : 3630 mm : 2682 mm : 2200 mm : 4400 x 2300 x 2400 mm : 4800 kg : 423 kg : 670 kg : 355 x 50 x 127 mm 10,4", grafic NC-control on swiveling arm with touch screen for: - seletion of working mode, program creation, graphic condition control, alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator oil mist collector autom. dressing attachment table mounted with compensation fully enclosed splash guard protection of ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 83670 € : 1581.36 € : 810 mm : 610 mm : 800 x 400 mm : 800 x 400 mm : 5 - 25 m/min : 0 - 2.250 mm/min : 450 mm : 0 - 675 mm/min : 480 mm : 500 - 2200 1/min : 3,75 (optional 5,5 / 7,5) kW : 1.5 kW : 3250 mm : 3075 mm : 2250 mm : 2900 kg : 175 kg : 350 kg : 355 x 50 x 127 mm : 1,1 kW Fully enclosed splash guard 10.4", graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list automatic vertical feed servo drive for grinding wheel feed and table cross feed heavy duty spindle with 2 sets (4) of class P4 super precision angula ...

: neu : ca. 6 Monate ab Auftragse : Taiwan : 67070 € : 1267.62 € : 800 mm : 610 mm : 800 x 400 mm : 800 x 400 mm : 810 mm : 5 - 25 m/min : 0.74 kW : 10 kVA kW : 3540 mm : 2080 mm : 2100 mm : 2900 kg : 980 mm : 350 kg : 355 x 50 x 127 mm : 0,001 mm : 500 - 1.800 U/min : 3,75 kW : 1.1 kW 10.4", graphic NC control on a swivel arm with touchscreen for: Operating mode selection Cycle selection and program creation Surface grinding Cross grinding Plunge grinding Dressing with automatic compensation Semi-automatic balancing in the machine Automatic spindle speed for constant surface speed Spindle load visualization Unbalance control Graphical status monitoring Alarm list aut. vertical feed servo drive for grinding wheel feed and table cross feed hardened slide ways in all 3 axes with needle rollers electro-magnetic chuck coolant equiptment with aut. paper filter and magnetic separator a ...

Siegmund Schweißtisch 16er Maße: 2000 x 1000mm Lochung 16mm Plasmanitriert Auf Rollen Inkl. Zubehör

Atlas 1602 Spare Parts Carrier Manufacturer: Atlas Type: 1602 E 2 pieces in stock 1602 D and 1602 E Location: 30900 Wedemark Private sale as a spare parts carrier Price 2,900,-- euros Spoons and grippers at extra cost Incl. help with loading.

Manufacturer: Hermann Waldner Year of Construction: 2004 Condition: Good used condition, mounted on a solid stainless steel/steel frame with heavy-duty casters Technical Details - Material: Stainless steel 1.4404 / V4A - Internal Volume (per nameplate): 225 liters - Exterior / Jacket Volume: 24 liters - Stirrer: Equipped with anchor stirrer - Manhole / Inspection Opening: ILMADUR DIN 7080-10 glass - Smaller Openings/Connections: 4 total, 3 approx 5 cm and 1 approx 4 cm - Large Openings: 2 total, approx 13 cm and approx 20 cm - Additional Features: Numerous additional process connections, floor emptying, connections for stirrer drive and vibrators, massive mobile frame with heavy-duty casters - Interior Pressure Rating: -1 to +1 bar - Outer Space/Jacket Pressure Rating: -1 to +3 bar - Temperature Range: -40 to +150 degrees C - Suitable Applications: Mixing, stirring, temperature contr ...

Height=1.67 m, Overall length= 1.97 m, Overall width= 2.93 m, Net weight= 1550 kg,

Manufacturer: SEYI Year of Manufacture: 2018 Model: SDI-160 Type of Machine: Solid Frame Crank Servo Press Technical Specifications: - Capacity: 160 tf - Stroke: 220 mm - Strokes per Minute: 1 to 60 spm - Die Height: 400 mm - Slide Adjustment: 100 mm - Slide Area: 900 x 580 mm2 - Bolster Area: 1150 x 760 mm2 - Air Pressure: 5 kg/cm2 - Main Motor: 54 KW - Power Source: 400 V, 50 HZ, 30 KVA - Guard Response Time: 13 ms - Braking Time: 147 ms - Guard Distance: 7000 mm - Machine Weight: 19.4 tf - Max. Die Area: 800 x 480 mm2 - Max. Die Weight: 0.5 tf - Operating Hours: approximately 7,000 hours Find more here - .ucymachines/ Contact us at - sales@ucymachines

2000 KVA prime @ 50 Hz or 2500 KVA prime @ 60 Hz, Power (KVA): 2000, Working hours: 4004

2000 KVA prime @ 50 Hz or 2500 KVA prime @ 60 Hz, Power (KVA): 2000, Working hours: 4257

General SKU291Y473 LocationBarneveld MakeFryma Koruma TypeDisho V160/400 Main Features MaterialStainless steel Inlet diameter120 mm Specified Features - Colloid mill Colloid millcheck Colloid mill in linecheck Rotor sizesø 140 x 80 mm With hopper± 170 l. Inletø 120 mm: DN80 OutletDN80 Motorcheck With gate type stirrercheck With scraperscheck Motor1,1 kW (230/400 V 1420 rpm) With vacuum pumpcheck Motor0, 75 kW: 3 m³/h MaterialStainless steel 1.4571 (316Ti) General Year of construction1992 Floorspace1,99 x 2,63 m Total height2,875 m Weight2024 kgBiotechnologyFeed additivesDetergent & surf.CosmeticsColloid millsFood additivesLubricants & oleoDairyConfectioneryBeveragesBiopharmaceuticalNew arrivalsMinerals & inorganicOintmentsGeneric medicinesPaints & coatingsOils & fatFryma KorumaIndustries > Chemical > BiotechnologyIndustries > Food & Feed > Feed additivesInd ...

Device for welding plastic tubes with a diameter of 63 to 160 mm consisting of: 1 weld tube positioning device 1 machine for machining the tubes before welding (to remove the oxidized film on the surface) machining of the 2 sides simultaneously 1 Teflon disc for heating tubes before welding.

The Alfa Laval LKH Centrifugal Pump is a premium pump for use in hygienic applications. Designed for Cleaning-in-Place (CIP), the Alfa Laval LKH is ideal for hygienic applications within the dairy, food, beverage and personal care industries that require gentle product treatment and reliable operation. Motor: 5,5 kW - 380/420 V - 50 Hz - 2.910 rpm - 11,2 A. Diameter of the impellor: 165 mm. Connections on the inlet: SMS 2,5 mm. Connections on the outlet: SMS 2. Current capacity (based on the available Alfa Laval performance curves and the current motor): 45.000 ltr/h @ 3,0 bar., Additional features:, Maximum capacity of the pump with change of motor (based on the available Alfa Laval performance curves): 60.000 ltr/h @ 2,2 Bar., Type of Machine: Sanitary centrifugal pump, Stock Number: 1570, Diameter of the impellor: 165 mm, Motor: 5,5 kW - 380/420 V - 50 Hz - 2.910 rpm - 11,2 A, Current ...

Type: EC-1600ZT voor het bewerken van grote onderdelen met geïntegreerde draaitafel met 4e as Tafeldiameter: 760 mm X-axes: 1626 mm Y-axes: 1270 mm Z-axes: 1016 mm Table dimensions: 1626 x 914 mm Max weight on the table: 4536 kg Admission in spindle (ISO): BT50 Power on the spindle: 22,4 kW Control: Haas Toolstore: yes Tools: 50 positions Frequency : 7500 rpm (460Nm) Length: 3378 mm Depth: 4928 mm Height: 4674 mm Weight: 14 ton ACCESSORIES: yes

Type: EC-1600ZT voor het bewerken van grote onderdelen met geïntegreerde draaitafel met 4e as Tafeldiameter: 760 mm X-axes: 1626 mm Y-axes: 1270 mm Z-axes: 1016 mm Table dimensions: 1626 x 914 mm Max weight on the table: 4536 kg Admission in spindle (ISO): BT50 Power on the spindle: 22,4 kW Control: Haas Toolstore: yes Tools: 50 positions Frequency : 7500 rpm (460Nm) Length: 3378 mm Depth: 4928 mm Height: 4674 mm Weight: 14 ton ACCESSORIES: yes

General SKU291Y489 LocationBarneveld MakeFryma TypeML 160 No.M10451 Motor Motor power7.5 kiloWatt Main Features MaterialStainless steel Motor7.5 KW Inlet diameter160 mm Specified Features - Colloid mill Colloid millcheck Rotor sizesø 200 x 50 mm With hoppercheck Inletø 160 mm Outlet155 x 85 mm Motor7,5 kW 380 V 2890 rpm Speed2890 rpm MaterialStainless steel 1.4301 (304) General Year of construction1993 Mounted on framecheck Mounted on wheelscheck With switchcheck Floorspace0,80 x 0,60 m Total height2,50 m Weight250 kgColloid millsNew arrivalsFrymaMills > Colloid millsNew arrivalsBrand > Fryma What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many mo ...

An industrial welding robot is offered. Reach: 1450mm, payload: 5kg, operating hours: 2213h, welding power source: ESAB AristoMig 500W, max. welding current: 500A, duty cycle: 60% at 500A/100% at 400A, controller type: IRC, robot variant: 1600-5/1.45, controller: IRC. Equipment: ESAB AristoMig 500W welding power source, IRC control cabinet, linear axes/positioner tracks. Weight: approx. 500kg, overall dimensions X/Y/Z: approx. 1200mm/800mm/1600mm. An inspection is possible by arrangement.

General SKU440X1410 MakeAllgaier-Werke TypeAVTM 1600/1 No.2186 Year of construction1978 LocationBarneveld Main Features MaterialMild steel/Stainless steel Surface1.8 m2 Sizes diameter1600 mm Specified Features - Tumbler screener Vibro sievecheck Sieve surface1,8 m² Number of sieve decks:1 With covercheck Inletø 90 mm Outletø 100 mm: ø 150 mm Drive vibro motorcheck Motor2,2 kW, 380 V, 1420 rpm With brush cleaningcheck Tumbler screening machines MaterialMild steel, Stainless steel 1.4552 General Mounted on mild steel framecheck Floor space2,25 x 2,25 m Total height2,10 m Weight800 kgFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharmaceuticsBeveragesD ...

EU STAGE 5 Compliant, 50/60 Hz switchable frequency via terminal link, 550 kVA Prime power, Spark arresting silencer, The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 6740; Engine: Perkins 2806J-E18TAG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including sockets CEE-Form:, 2x 16A (1ph+N+E), 2x 32A (3ph+N+E), 1x 63A (3ph+N+E), 1x 125A (3ph+N+E); Water Tank Volume [l]: 1125

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 5938; Engine: Perkins 4006-23TAG3A; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 1494

Tube labeling machine Manufacturer: BBK Type: SR 160 Year of Make: 2006 Capacity max. 1,500 tubes/h Label width max. 160 mm 2 tube holder format sets: tube Ø 25 mm, tube length 90 mm, tube Ø 35, tube length 165 mm Allen Nxi Thermal Transfer Printing Unit Transfer conveyor to the tube filling and sealing machine Drive 400/50Hz Mobile Has worked in line with trailing tube filling and sealing machine 02-0769

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 769; Engine: Perkins 1103A-33TG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 145

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 818; Engine: Perkins 1103A-33G1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 71

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 1341; Engine: Perkins 1106A-70TG1; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 327

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Power [PS]: 179; Gross weight [kg]: 1434; Engine: Perkins 1106A-70TAG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 327

The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames; Gross weight [kg]: 2100; Engine: Perkins 1106A-70TG1; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger; Water Tank Volume [l]: 289

turning diameter over bed: 330 mm turning diameter over slide rest: 195 mm turning length: 750 mm center height over bed: 160 mm centre distance: 650 mm digital readout: 3 Achsen HEIDENHAIN bed width: 205 mm spindle bore: 36 mm spindle taper: KK5 DIN 55027 turning speed range: 48 - 2500 U/min power requirement: 3,0 kW 4-jaw-chuck diameter: 160 mm quick change toolholder: MULTIFIX Typ A taper in tailstock-quill: MK 3 dia. of quill: 40 mm quill stroke: 100 mm voltage: 400 V total power requirement: 3,2 kW weight of the machine ca.: 680 kg dimensions of the machine ca.: 1,60 x 0,80 x 1,55 m - Serial-No.: 4432 - HEIDENHAIN 3-axis digital readout - MULTIFIX quick-change tool holder - Collet chuck including collets Ø 8 - Ø 27 mm - Face plate Ø 250 mm - Quick-action drill chuck - Center point The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 160 mm : 50 mm clamping width: 245 mm clamping capacity: 6,0 t weight: 60 kg dimensions of the machine ca.: 600 x 160 x 165 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thickness of jaw: 160 mm : 50 mm clamping width: 245 mm clamping capacity: 6,0 t weight: 60 kg dimensions of the machine ca.: 600 x 160 x 165 mm - Serial-no.: 40246 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC turning center Type: Puma MX 1600 ST Manufacturer: Doosan Year: 2014 Highly productive multifunctional CNC turning-milling center designed for complete machining of parts in one clamping. Control: FANUC Series 31i Model A Max machining diameter: 330 mm Max machining length: 900 mm Main spindle: 6 chuck Speed ​​up to 6,000 rpm Bar passage 51 mm Y-axis: ± 85 mm B-axis: ± 120° Milling spindle: Capto C5 interface Speed ​​up to 12,000 rpm Chain magazine for milling spindle: 40 positions for Capto C5 tools Revolver: 16 tool positions Bar feeder Belt conveyor for finished parts workpieces. Tool holders Machine in good condition, fully functional. Find more here - .ucymachines/ Contact us at - sales@ucymachines

Aggregate equipment: - Joining milling unit 2 x 2.2 Kw 200 Hz - Gluing unit - Cross-cut unit chamfer/straight 2 x 0.35 Kw - Milling unit 2 x 0.55 Kw counter rotation - Grooving unit 1 x 3.5 Kw - Shape milling unit 2 x 0.35 Kw Wd 60 - Profile scraper blade with quick-change heads (R 1 and 2 mm) - Glue joint scraper blade - Buffing unit Other features: - Extended inlet ruler with program adjustment - Program adjustment pressure zone - Motorized adjustment upper pressure - PU top pressure rollers - Automatic edge retraction - Quickmelt application unit - Pneumatic 2-point adjustment caps - Pneumatic adjustment of the scraper blade - Program adjustment side buttons - Pneumatic 2-point adjustment, vertical sensing rollers - Release agent spray unit workpiece - Lubricant spray unit edge material - Cleaning agent spray unit - Axis adjustment for groove milling machi ...

Manufacturer: AWEA Model No.: A+1600 Year: 2011 Condition: Used Stock No: 9497 Control System: FANUC Series 18i-MB Switch-on hours: 1727 h Operating hours: 374 h Work table length: 1700 mm Work table width: 800 mm Maximum table load (uniform): 2000 kg Spindle drive power: 20 kW Maximum vertical spindle speed: 6000 1/min X-axis travel: 1600 mm Y-axis travel: 800 mm Z-axis travel: 800 mm Cone: BT 50 Number of all tools: 24 pieces Machine weight: 15000 kg

Manufacturer: DOOSAN Model: PUMA MX 1600 ST Year: 2014 Condition: Used Stock number: 9512 Control system: FANUC Maximum turning length: 899 mm Max. turning diameter: 330 mm Maximum turning diameter over bed: 680 mm Maximum main spindle power: 15 kW Maximum spindle speed: 6000 1/min Weight: 11500 kg Equipment: Tool Holder Bar Feeder Strip workpiece remover Grips 2x universal chuck

1) Perfecta 168 TS high-speed cutter, cutting width: 1680mm, usable rear table length: 1680mm, max. clamp opening: 165mm, min. residual strip: 26mm, max. clamping force: 60kN, table height: 890mm, operating hours: approx. 15813h, total cut counter: 349265cuts, weight: approx. 6900kg. Including material hold-down, turning saddle, six carbide knives and five knife cases. 2) Perfecta ZTS 2750 gripper transport system for automatic feeding of the high-speed cutter via the rear table, max. travel: 2750mm, max. clamp opening without/with adapter: 165mm/135mm. 3) Perfecta BASA 7 automatic jogging machine, max. sheet size: 1260×1670mm, min. sheet size: 550×660mm, max. stack height: 1400mm, grammage range: 60-300g/m², feeding from the right or left possible. 4) Perfecta BA 6 unloader, max. size: 1050mm×1450mm, max. layer height: 160mm, max. stack height: 1400mm, max. load capacity: 300kg. Equ ...

pressure: 160 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 400 mm ram stroke speed: 200 mm/sec work speed: 10.0 mm/min return speed: 165 mm/sec work stroke: ca. 350 mm dayligth: ca. 660 mm oil volume: 450 ltr. table height: 830 / 950 mm table width: 75.0 / 60.0 mm voltage: 400 Volt total power requirement: 18.5 kW weight: 13440 kg range L-W-H: 5150 x 2050 x 3150 mm current new price approx. 90.000 euros special price on request ------------------------------------------------------ ULTIMA PLUS electro-hydraulic press brake with: increased installation height .. approx. 660 mm increased cylinder stroke .. approx. 350 mm ----------------------------------------------------- - in checked condition - machine video - https://www.youtube.com/watch?v=chgCaXLnpa8 Equipment: - CNC electro-hydraulic die/press brake - CYBELEC CNC control DNC 880 S swiveling control p ...

serial number: 813 stroke: 160 mm automatic feeds: ja cross-moving table: 2-Achsen weight of the machine ca.: 1,2 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

DeWalt 1600S Manufacturer: Dewalt Type: 1600S M. Nr: nn Max. Saw heigth: 100 mm Max. Saw length: 610 mm Saw: ø350 mm Saw spindle: Ø30 mm Motor: 3 kW Toerental: 2.650 rpm Dust extraction: ø100 mm Weight: 115 KG

DeWalt 1600 Manufacturer: Dewalt Type: 1600 Max. Saw heigth: 100 mm Max. Saw length: 610 mm Saw: ø350 mm Saw spindle: Ø30 mm Motor: 3 kW Toerental: 2.650 rpm Dust extraction: ø100 mm Weight: 115 KG

AL-KO Mobil Power JET 160 Manufacturer: Alko Type: Mobil Power JET 160 Year: 2005 Power: 2,2 kW Control: Automatic Capacity: 2000 m3/hr Dy=ust extraction diameter: ø160mm Vacuum: 2.120 Pa PAirpressure: 8,5 bar Container: 1 roll container with bin-liner